1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Built Into Tomorrow
Benets
• Voltage range: 420 – 1,000 VDC
• Capacitance range: 0.01 – 22 µF
• Lead Spacing: 10 – 37.5 mm
• Capacitance tolerance: ±10%, ±20%, ±5% (on request)
• Climatic category: 55/105/56 IEC 60068–1
• Operatingtemperaturerangeof−55°Cto+105°C
• RoHS compliance and lead-free terminations
• Tape & Reel packaging in accordance with IEC 60286–2
• Self-healing
Overview
The R71 is constructed of metallized polypropylene
lmwithradialleadsoftinnedwire.Theradialleads
are electrically welded to the metal layer on the ends of
the capacitor winding. The capacitor is encapsulated
in a self-extinguishing solvent resistant plastic case
with thermosetting resin material meeting UL 94 V–0
requirements.
Applications
Typical applications include power factor correction
and pulse applications. Not suitable for across-the-line
application (see Suppressor Capacitors).
Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial,
SMPS PFC Applications
Part Number System
R71 MF2100 AA 00 J
Series Rated Voltage
(VDC)
Lead Spacing
(mm)
Capacitance
Code (pF) Packaging Internal Use Capacitance
Tolerance
Metallized
Polypropylene
M = 420
V = 520
P = 630
Q = 1,000
F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
signicantgures.
Therstdigit
speciesthetotal
number of zeros
to be added.
See Ordering
Options Table
00
10
20
30
40
J = ±5%
K = ±10%
M = ±20%
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging
Code
10
15
22.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
AA
Ammo Pack
H0= 18.5±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Standard Reel Ø 355 mm)
H0 = 18.5±0.5
GY
Tape & Reel (Large Reel Ø 500 mm)
H0 = 18.5±0.5
CK
Bulk (Bag) – Short Leads
3.5+0.5/−0
JB
Bulk (Bag) – Short Leads
4.0+0.5/−0
JE
Bulk (Bag) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Bag) – Long Leads
18±1
JM
Bulk (Bag) – Long Leads
30+5/−0
40
Bulk (Bag) – Long Leads
25+2/−1
50
27.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
4+2/−0
AA
Other Lead and Packaging Options
Tape & Reel (Standard Reel Ø 355 mm)
H0 = 18.5±0.5
GY
Tape & Reel (Large Reel Ø 500 mm)
H0 = 18.5±0.5
CK
1
Bulk (Tray) – Short Leads
3.5+0.5/−0
JB
Bulk (Tray) – Short Leads
4.0+0.5/−0
JE
Bulk (Tray) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Tray) – Long Leads
18±1
JM
Bulk (Tray) – Long Leads
30+5/−0
40
Bulk (Tray) – Long Leads
25+2/−1
50
37.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
4+2/−0
AA
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
3.5+0.5/−0
JB
Bulk (Tray) – Short Leads
4.0+0.5/−0
JE
Bulk (Tray) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Tray) – Long Leads
18±1
JM
Bulk (Tray) – Long Leads
30+5/−0
40
Bulk (Tray) – Long Leads
25+2/−1
50
1 = Not for all sizes, see "Packaging Quantities" table.
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Dimensions – Millimeters
F
P2P2P2
L
Loose Taped
T
HH
0
LL
S
STH L F
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
±0.4
4.0
+0.2/−0.5
9.0
+0.1/−0.5
13.0
+0.2/−0.5
0.6
±0.05
10.0
±0.4
5.0
+0.2/−0.5
11.0
+0.1/−0.5
13.0
+0.2/−0.5
0.6
±0.05
10.0 ±0.4 6.0 +0.2/−0.5 12.0 +0.1/−0.5 13.0 +0.2/−0.5 0.6 ±0.05
15.0
±0.4
5.0
+0.2/−0.5
11.0
+0.1/−0.5
18.0
+0.3/−0.5
0.6
±0.05
15.0
±0.4
6.0
+0.2/−0.5
12.0
+0.1/−0.5
18.0
+0.3/−0.5
0.6
±0.05
15.0
±0.4
6.0
+0.2/−0.5
17.5
+0.1/−0.5
18.0
+0.3/−0.5
0.6
±0.05
15.0
±0.4
7.5
+0.2/−0.5
13.5
+0.1/−0.5
18.0
+0.5/−0.5
0.6
±0.05
15.0
±0.4
7.5
+0.2/−0.5
18.5
+0.1/−0.5
18.0
+0.5/−0.5
0.8
±0.05
15.0
±0.4
8.5
+0.2/−0.5
14.5
+0.1/−0.5
18.0
+0.5/−0.5
0.6
±0.05
15.0
±0.4
9.0
+0.2/−0.5
12.5
+0.1/−0.5
18.0
+0.5/−0.5
0.6
±0.05
15.0
±0.4
10.0
+0.2/−0.5
16.0
+0.1/−0.5
18.0
+0.5/−0.5
0.8
±0.05
15.0
±0.4
11.0
+0.2/−0.5
19.0
+0.1/−0.5
18.0
+0.5/−0.5
0.8
±0.05
15.0
±0.4
13.0
+0.2/−0.5
12.0
+0.1/−0.5
18.0
+0.5/−0.5
0.8
±0.05
22.5
±0.4
6.0
+0.2/−0.5
15.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
±0.05
22.5
±0.4
7.0
+0.2/−0.5
16.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
±0.05
22.5
±0.4
8.5
+0.2/−0.5
17.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
±0.05
22.5
±0.4
10.0
+0.2/−0.5
18.5
+0.1/−0.5
26.5
+0.3/−0.5
0.8
±0.05
22.5
±0.4
11.0
+0.2/−0.5
20.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
±0.05
22.5
±0.4
13.0
+0.2/−0.5
22.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
±0.05
27.5
±0.4
9.0
+0.2/−0.7
17.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
±0.05
27.5
±0.4
11.0
+0.2/−0.7
20.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
±0.05
27.5
±0.4
13.0
+0.2/−0.7
22.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
±0.05
27.5
±0.4
13.0
+0.2/−0.7
25.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
±0.05
27.5
±0.4
14.0
+0.2/−0.7
28.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
±0.05
27.5
±0.4
18.0
+0.2/−0.7
33.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
±0.05
27.5
±0.4
22.0
+0.2/−0.7
37.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
±0.05
37.5
±0.4
11.0
+0.3/−0.7
22.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
±0.05
37.5 ±0.4 13.0 +0.3/−0.7 24.0 +0.1/−0.7 41.5 +0.3/−0.7 1.0 ±0.05
37.5
±0.4
16.0
+0.3/−0.7
28.5
+0.1/−0.7
41.5
+0.3/−0.7
1.0
±0.05
37.5
±0.4
19.0
+0.3/−0.7
32.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
±0.05
37.5
±0.4
20.0
+0.3/−0.7
40.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
±0.05
37.5
±0.4
24.0
+0.3/−0.7
44.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
±0.05
37.5
±0.4
30.0
+0.3/−0.7
45.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
±0.05
Note: See Ordering Options Table for lead length (LL/Ho) options.
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Performance Characteristics
Dielectric Polypropylenelm
Plates Metal layer deposited by evaporation under vacuum
Winding Non-inductive type
Leads Tinned wire
Protection
Rated Voltage VR (VDC) 420 520 630 1,000
Rated Voltage VR (VAC) 220 250 275 275
Capacitance Range (µF) 0.01 – 22 0.01 – 22 0.01 – 15 0.22 – 10
Capacitance Values E12series(IEC60063)measuredat1kHzand+20±1°C
Capacitance Tolerance ±10%, ±20%, ±5% on request
Operating Temperature
Range −40°Cto+110°C
Rated Temperature TR+105°C
Voltage Derating Above+105°CDCandACvoltagederatingis4%/°C
Climatic Category 40/110/56 IEC 60068–1
Storage Conditions
Storagetime:≤24monthsfromthedatemarkedonthepackagelabel
Averagerelativehumidityperyear≤70%
RH≤85%for30daysrandomlydistributedthroughouttheyear
Dew is absent
Temperature:−40to80°C(see"MaximumHumidityinStorageConditions"graphbelow)
Test Voltage 1.6 x VRVDCfor2seconds(betweenterminations)at+25°C±5°C
Capacitance Drift
Maximum Pulse Steepness dV/dt according to Table 1. For working voltages lower than rated voltage (V < VR),thespecieddV/dt
can be multiplied by the factor V
/V.
TemperatureCoecient −(200±100)ppm/°Cat1kHz
Self Inductance
(Lead Length ~ 2 mm)
Lead Spacing
(mm)
10 15 22.5 27.5 37.5
L(nH)≈ 910 16 18 20
Maximum 1 nH per 1 mm lead and capacitor length.
DissipationFactortanδ ≤0.1%(0.06%)*at25°C±5°C(*typicalvalue)
Insulation Resistance
Measuredat+25°C±5°C,100VDC60seconds
Minimum Values Between Terminals
C≤0.33μF C>0.33μF
≥100,000MΩ
(≥500,000MΩ)*
≥30,000MΩ•µF
(≥150,000MΩ•µF)*
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Performance Characteristics cont.
0
10
20
30
40
50
60
70
80
90
100
−
40
−
20 0 20 40 60 80
Temperature (°C)
Maximum Humidity in Storage Condition
Relative Humidity (%)
30 Days
Annual Average
Temperature T
h
(°C)
Maximum Irms vs. Th
Maximum Irms
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
40 50 60 70 80 90 100 110 120
Maximum Overtemperature ∆Tlim vs Th
Temperature Th(°C)
∆Tlim (°C)
0
5
10
15
20
25
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation
conditions in °C.
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85°C)
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
420 VDC/220 VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
520 VDC/250 VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
630 VDC/275 VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
1,000 VDC/275 VAC
0.033 µF p = 10
0.1 µF p = 15
0.22 µF p = 15
1 µF p = 22.5
2.2 µF p = 27.5
6.8 µF p = 37.5
0.015 µF p = 7.5
0.047 µF p = 10
0.1 µF p = 15
0.47 µF p = 22.5
1.5 µF p = 27.5
5.6 µF p = 37.5
0.022 µF p = 10
0.1 µF p = 10
0.33 µF p = 22.5
1 µF p = 22.5
2.2 µF p = 27.5
10 µF p = 37.5
0.33 µF p = 27.5
0.56 µF p = 27.5
1 µF p = 27.5
4.7 µF p = 37.5
6.8 µF p = 37.5
10 µF p = 37.5
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85°C)
0.01
1
0.1
10
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
420 VDC/220 VAC 520 VDC/250 VAC
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
630 VDC/275 VAC
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
1,000 VDC/275 VAC
0.01
1
0.1
10
100
0.033 µF p = 10
0.1 µF p = 15
0.22 µF p = 15
1 µF p = 22.5
2.2 µF p = 27.5
6.8 µF p = 37.5
0.015 µF p = 7.5
0.047 µF p = 10
0.1 µF p = 15
0.47 µF p = 22.5
1.5 µF p = 27.5
5.6 µF p = 37.5
0.022 µF p = 10
0.1 µF p = 10
0.33 µF p = 22.5
1 µF p = 22.5
2.2 µF p = 27.5
10 µF p = 37.5
0.33 µF p = 27.5
0.56 µF p = 27.5
1 µF p = 27.5
4.7 µF p = 37.5
6.8 µF p = 37.5
10 µF p = 37.5
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Environmental Test Data
Damp Heat, Steady
State Test
Test Conditions: Performances
Test 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C±2°C
93% ±2%
56 days |ΔC/C|≤5%,
IRaftertest≥50%ofinitiallimit
Test 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C±2°C
95% ±2%
500 hours
Endurance Test Test Conditions Performances
Temperature:
Voltage applied:
Test duration:
+105°C±2°C
1.25 x VR (DC)
2,000 hours
|ΔC/C|≤5%,
IRaftertest≥50%ofinitiallimit
Resistance to Soldering
Heat Test
Test Conditions Performances
Solder bath temperature:
Dipping time (with heat
screen):
260°C±5°C
10 seconds ±1 second
|ΔC/C|≤2%
Environmental Compliance
All KEMET pulse capacitors are RoHS Compliant.
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Table 1 – Ratings & Part Number Reference
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%.
(3) M = ±20% (only available tolerance).
(*) Irms value that leads to a ΔT of ≈ 7°C on the box surface > TBOX = TAMB + ΔT = 85°C + 7°C = 92°C
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4
mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
420 220 0.010 4.0 9.0 13.0 10.0 0.6 250 210,000 2.5 93,979 0.17 61 71MF2100(1)00(2) R71MF2100(1)00(2)
420 220 0.015 4.0 9.0 13.0 10.0 0.6 250 210,000 3.8 92,653 0.21 61 71MF2150(1)00(2) R71MF2150(1)00(2)
420 220 0.022 4.0 9.0 13.0 10.0 0.6 250 210,000 5.5 91,809 0.25 61 71MF2220(1)00(2) R71MF2220(1)00(2)
420 220 0.033 4.0 9.0 13.0 10.0 0.6 250 210,000 8.3 91,206 0.31 61 71MF2330(1)00(2) R71MF2330(1)00(2)
420 220 0.047 4.0 9.0 13.0 10.0 0.6 250 210,000 11.8 9847 0.37 61 71MF2470(1)00(2) R71MF2470(1)00(2)
420 220 0.068 4.0 9.0 13.0 10.0 0.6 250 210,000 17.0 9585 0.45 61 71MF2680(1)30(2) R71MF2680(1)30(2)
420 220 0.10 4.0 9.0 13.0 10.0 0.6 250 210,000 25.0 9398 0.54 61 71MF3100(1)30(2) R71MF3100(1)30(2)
420 220 0.15 5.0 11.0 13.0 10.0 0.6 250 210,000 37.5 9265 0.69 57 71MF3150(1)30(2) R71MF3150(1)30(2)
420 220 0.22 6.0 12.0 13.0 10.0 0.6 250 210,000 55.0 9181 0.85 55 71MF3220(1)30(2) R71MF3220(1)30(2)
420 220 0.10 5.0 11.0 18.0 15.0 0.6 160 134,400 16.0 10 398 0.64 44 71MI3100(1)00(2) R71MI3100(1)00(2)
420 220 0.15 5.0 11.0 18.0 15.0 0.6 160 134,400 24.0 10 371 0.66 44 71MI3150(1)00(2) R71MI3150(1)00(2)
420 220 0.22 5.0 11.0 18.0 15.0 0.6 160 134,400 35.2 10 253 0.80 44 71MI3220(1)00(2) R71MI3220(1)00(2)
420 220 0.33 6.0 12.0 18.0 15.0 0.6 160 134,400 52.8 10 169 0.99 43 71MI3330(1)00(2) R71MI3330(1)00(2)
420 220 0.47 7.5 13.5 18.0 15.0 0.6 160 134,400 75.2 10 119 1.21 41 71MI3470(1)00(2) R71MI3470(1)00(2)
420 220 0.47 6.0 17.5 18.0 15.0 0.6 160 134,400 75.2 10 119 1.26 38 71MI3470(1)10(2) R71MI3470(1)10(2)
420 220 0.47 9.0 12.5 18.0 15.0 0.6 160 134,400 75.2 10 119 1.19 42 71MI3470(1)20(2) R71MI3470(1)20(2)
420 220 0.68 6.0 17.5 18.0 15.0 0.6 160 134,400 108.8 10 105 1.34 38 71MI3680(1)40(2) R71MI3680(1)40(2)
420 220 0.68 8.5 14.5 18.0 15.0 0.6 160 134,400 108.8 10 105 1.30 40 71MI3680(1)30(2) R71MI3680(1)30(2)
420 220 0.68 13.0 12.0 18.0 15.0 0.8 160 134,400 108.8 10 105 1.26 43 71MI3680(1)20(2) R71MI3680(1)20(2)
420 220 1.0 7.5 18.5 18.0 15.0 0.8 160 134,400 160.0 10 72 1.64 37 71MI4100(1)40(3) R71MI4100(1)40(3)
420220 1.0 10.0 16.0 18.0 15.0 0.8 160 134,400 160.0 10 72 1.60 39 71MI4100(1)30(2) R71MI4100(1)30(2)
420 220 1.5 11.0 19.0 18.0 15.0 0.8 160 134,400 240.0 10 53 1.92 37 71MI4150(1)30(2) R71MI4150(1)30(2)
420 220 0.22 6.0 15.0 26.5 22.5 0.8 100 84,000 22.0 16 326 0.86 30 71MN3220(1)00(2) R71MN3220(1)00(2)
420 220 0.33 6.0 15.0 26.5 22.5 0.8 100 84,000 33.0 16 217 1.05 30 71MN3330(1)00(2) R71MN3330(1)00(2)
420 220 0.47 6.0 15.0 26.5 22.5 0.8 100 84,000 47.0 16 203 1.08 30 71MN3470(1)00(2) R71MN3470(1)00(2)
420 220 0.68 6.0 15.0 26.5 22.5 0.8 100 84,000 68.0 16 140 1.30 30 71MN3680(1)00(2) R71MN3680(1)00(2)
420 220 1.0 7.0 16.0 26.5 22.5 0.8 100 84,000 100.0 16 95 1.60 29 71MN4100(1)30(2) R71MN4100(1)30(2)
420 220 1.5 8.5. 17.0 26.5 22.5 0.8 100 84,000 150.0 16 64 1.97 29 71MN4150(1)30(3) R71MN4150(1)30(3)
420 220 1.5 10.0 18.5 26.5 22.5 0.8 100 84,000 150.0 16 64 2.00 28 71MN4150(1)00(2) R71MN4150(1)00(2)
420 220 2.2 10.0 18.5 26.5 22.5 0.8 100 84,000 220.0 16 43 2.42 28 71MN4220(1)40(3) R71MN4220(1)40(3)
420 220 2.2 11.0 20.0 26.5 22.5 0.8 100 84,000 220.0 16 43 2.45 27 71MN4220(1)30(2) R71MN4220(1)30(2)
420 220 3.3 13.0 22.0 26.5 22.5 0.8 100 84,000 330.0 16 29 3.05 27 71MN4330(1)30(2) R71MN4330(1)30(2)
420 220 0.68 9.0 17.0 32.0 27.5 0.8 80 67,200 54.4 18 176 1.28 25 71MR3680(1)00(2) R71MR3680(1)00(2)
420 220 1.0 9.0 17.0 32.0 27.5 0.8 80 67,200 80.0 18 119 1.55 25 71MR4100(1)00(2) R71MR4100(1)00(2)
420 220 1.5 11.0 20.0 32.0 27.5 0.8 80 67,200 120.0 18 80 1.94 24 71MR4150(1)00(2) R71MR4150(1)00(2)
420 220 2.2 13.0 22.0 32.0 27.5 0.8 80 67,200 176.0 18 54 2.38 23 71MR4220(1)00(2) R71MR4220(1)00(2)
420 220 3.3 13.0 25.0 32.0 27.5 0.8 80 67,200 264.0 18 36 2.98 22 71MR4330(1)40(2) R71MR4330(1)40(2)
420 220 4.7 18.0 33.0 32.0 27.5 0.8 80 67,200 376.0 18 25 3.73 20 71MR4470(1)00(2) R71MR4470(1)00(2)
420 220 6.8 22.0 37.0 32.0 27.5 0.8 80 67,200 544.0 18 18 4.58 19 71MR4680(1)00(2) R71MR4680(1)00(2)
420 220 3.3 13.0 24.0 41.5 37.5 1.0 60 50,400 198.0 20 36 3.28 18 71MW4330(1)20(2) R71MW4330(1)20(2)
420 220 4.7 16.0 28.5 41.5 37.5 1.0 60 50,400 282.0 20 71 2.40 17 71MW4470(1)00(2) R71MW4470(1)00(2)
420 220 6.8 19.0 32.0 41.5 37.5 1.0 60 50,400 408.0 20 49 2.94 17 71MW4680(1)00(2) R71MW4680(1)00(2)
420 220 10 20.0 40.0 41.5 37.5 1.0 60 50,400 600.0 20 43 3.27 16 71MW5100(1)00(2) R71MW5100(1)00(2)
420 220 15 24.0 44.0 41.5 37.5 1.0 6050,400 900.0 20 29 4.07 15 71MW5150(1)00(2) R71MW5150(1)00(2)
420 220 22 30.0 45.0 41.5 37.5 1.0 60 50,400 1,320.0 20 24 4.47 15 71MW5220(1)00(2) R71MW5220(1)00(2)
520 250 0.010 4.0 9.0 13.0 10.0 0.6 300 312,000 3.0 93,979 0.17 61 71VF2100(1)00(2) R71VF2100(1)00(2)
520 250 0.015 4.0 9.0 13.0 10.0 0.6 300 312,000 4.5 92,653 0.21 61 71VF2150(1)00(2) R71VF2150(1)00(2)
520 250 0.022 4.0 9.0 13.0 10.0 0.6 300 312,000 6.6 91,809 0.25 61 71VF2220(1)00(2) R71VF2220(1)00(2)
520 250 0.033 4.0 9.0 13.0 10.0 0.6 300 312,000 9.9 91,206 0.31 61 71VF2330(1)00(2) R71VF2330(1)00(2)
520 250 0.047 4.0 9.0 13.0 10.0 0.6 300 312,000 14.1 9847 0.37 61 71VF2470(1)30(2) R71VF2470(1)30(2)
520 250 0.068 4.0 9.0 13.0 10.0 0.6 300 312,000 20.4 9585 0.45 61 71VF2680(1)30(2) R71VF2680(1)30(2)
VDC VAC Cap
Value TH L
Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Apk nH mΩ Arms (°C/W) KEMET Internal
Part Number
Customer
Part Number
Ipkr ESL ESR Irms max (*) Rth
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4
mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
520 250 0.10 5.0 11.0 13.0 10.0 0.6 300 312,000 30.0 9398 0.56 57 71VF3100(1)30(2) R71VF3100(1)30(2)
520 250 0.15 6.0 12.0 13.0 10.0 0.6 300 312,000 45.0 9265 0.70 55 71VF3150(1)30(2) R71VF3150(1)30(2)
520 250 0.10 5.0 11.0 18.0 15.0 0.6 200 208,000 20.0 10 398 0.64 44 71VI3100(1)00(2) R71VI3100(1)00(2)
520 250 0.15 5.0 11.0 18.0 15.0 0.6 200 208,000 30.0 10 371 0.66 44 71VI3150(1)30(2) R71VI3150(1)30(2)
520 250 0.22 6.0 12.0 18.0 15.0 0.6 200 208,000 44.0 10 253 0.81 43 71VI3220(1)30(2) R71VI3220(1)30(2)
520 250 0.22 6.0 17.5 18.0 15.0 0.6 200 208,000 44.0 10 253 0.86 38 71VI3220(1)10(2) R71VI3220(1)10(2)
520 250 0.33 6.0 17.5 18.0 15.0 0.6 200 208,000 66.0 10 169 1.06 38 71VI3330(1)40(2) R71VI3330(1)40(2)
520 250 0.33 7.5 13.5 18.0 15.0 0.6 200 208,000 66.0 10 169 1.01 41 71VI3330(1)30(2) R71VI3330(1)30(2)
520 250 0.33 9.0 12.5 18.0 15.0 0.6 200 208,000 66.0 10 169 1.00 42 71VI3330(1)20(2) R71VI3330(1)20(2)
520 250 0.47 8.5 14.5 18.0 15.0 0.6 200 208,000 94.0 10 119 1.22 40 71VI3470(1)30(2) R71VI3470(1)30(2)
520 250 0.47 7.5 18.5 18.0 15.0 0.8 200 208,000 94.0 10 119 1.28 37 71VI3470(1)10(2) R71VI3470(1)10(2)
520 250 0.47 13.0 12.0 18.0 15.0 0.8 200 208,000 94.0 10 119 1.19 43 71VI3470(1)20(2) R71VI3470(1)20(2)
520 250 0.68 10.0 16.0 18.0 15.0 0.8 200 208,000 136.0 10 105 1.32 39 71VI3680(1)30(2) R71VI3680(1)30(2)
520 250 1.0 11.0 19.0 18.0 15.0 0.8 200 208,000 200.0 10 72 1.65 37 71VI4100(1)30(3) R71VI4100(1)30(3)
520 250 0.22 6.0 15.0 26.5 22.5 0.8 120 124,800 26.4 16 326 0.86 30 71VN3220(1)00(2) R71VN3220(1)00(2)
520 250 0.33 6.0 15.0 26.5 22.5 0.8 120 124,800 39.6 16 217 1.05 30 71VN3330(1)00(2) R71VN3330(1)00(2)
520 250 0.47 6.0 15.0 26.5 22.5 0.8 120 124,800 56.4 16 203 1.08 30 71VN3470(1)30(2) R71VN3470(1)30(2)
520 250 0.68 7.0 16.0 26.5 22.5 0.8 120 124,800 81.6 16 140 1.32 29 71VN3680(1)30(2) R71VN3680(1)30(2)
520 250 1.0 10.0 18.5 26.5 22.5 0.8 120 124,800 120.0 16 95 1.63 28 71VN4100(1)30(2) R71VN4100(1)30(2)
520 250 1.5 11.0 20.0 26.5 22.5 0.8 120 124,800 180.0 16 64 2.02 27 71VN4150(1)30(2) R71VN4150(1)30(2)
520 250 2.2 13.0 22.0 26.5 22.5 0.8 120 124,800 264.0 16 43 2.49 27 71VN4220(1)30(2) R71VN4220(1)30(2)
520 250 0.68 9.0 17.0 32.0 27.5 0.8 100 104,000 68.0 18 176 1.28 25 71VR3680(1)00(2) R71VR3680(1)00(2)
520 250 1.0 9.0 17.0 32.0 27.5 0.8 100 104,000 100.0 18 119 1.55 25 71VR4100(1)30(2) R71VR4100(1)30(2)
520 250 1.0 11.0 20.0 32.0 27.5 0.8 100 104,000 100.0 18 119 1.58 24 71VR4100(1)00(2) R71VR4100(1)00(2)
520 250 1.5 11.0 20.0 32.0 27.5 0.8 100 104,000 150.0 18 80 1.94 24 71VR4150(1)00(2) R71VR4150(1)00(2)
520 250 2.2 13.0 25.0 32.0 27.5 0.8 100 104,000 220.0 18 54 2.43 22 71VR4220(1)30(2) R71VR4220(1)30(2)
520 250 2.2 14.0 28.0 32.0 27.5 0.8 100 104,000 220.0 18 54 2.48 21 71VR4220(1)00(2) R71VR4220(1)00(2)
520 250 3.3 14.0 28.0 32.0 27.5 0.8 100 104,000 330.0 18 36 3.04 21 71VR4330(1)30(2) R71VR4330(1)30(2)
520 250 3.3 18.0 33.0 32.0 27.5 0.8 100 104,000 330.0 18 36 3.12 20 71VR4330(1)00(2) R71VR4330(1)00(2)
520 250 4.7 18.0 33.0 32.0 27.5 0.8 100 104,000 470.0 18 25 3.73 20 71VR4470(1)30(2) R71VR4470(1)30(2)
520 250 4.7 22.0 37.0 32.0 27.5 0.8 100 104,000 470.0 18 25 3.81 19 71VR4470(1)00(2) R71VR4470(1)00(2)
520 250 6.8 22.0 37.0 32.0 27.5 0.8 100 104,000 680.0 18 18 4.58 19 71VR4680(1)30(2) R71VR4680(1)30(2)
520 250 2.2 11.0 22.0 41.5 37.5 1.0 70 72,800 154.0 20 54 2.65 19 71VW4220(1)00(2) R71VW4220(1)00(2)
520 250 3.3 13.0 24.0 41.5 37.5 1.0 70 72,800 231.0 20 36 3.28 18 71VW4330(1)30(2) R71VW4330(1)30(2)
520 250 3.3 16.0 28.5 41.5 37.5 1.0 70 72,800 231.0 20 36 3.37 17 71VW4330(1)00(2) R71VW4330(1)00(2)
520 250 4.7 16.0 28.5 41.5 37.5 1.0 70 72,800 329.0 20 71 2.40 17 71VW4470(1)00(2) R71VW4470(1)00(2)
520 250 6.8 19.0 32.0 41.5 37.5 1.0 70 72,800 476.0 20 49 2.94 17 71VW4680(1)30(2) R71VW4680(1)30(2)
520 250 6.8 20.0 40.0 41.5 37.5 1.0 70 72,800 476.0 20 49 3.05 16 71VW4680(1)00(2) R71VW4680(1)00(2)
520 250 10 20.0 40.0 41.5 37.5 1.0 70 72,800 700.0 20 43 3.27 16 71VW5100(1)30(2) R71VW5100(1)30(2)
520 250 10 24.0 44.0 41.5 37.5 1.0 70 72,800 700.0 20 43 3.32 15 71VW5100(1)00(2) R71VW5100(1)00(2)
520 250 15 24.0 44.0 41.5 37.5 1.0 70 72,800 1,050.0 20 29 4.07 15 71VW5150(1)30(2) R71VW5150(1)30(2)
520 250 15 30.0 45.0 41.5 37.5 1.0 70 72,800 1,050.0 20 29 4.08 15 71VW5150(1)00(2) R71VW5150(1)00(2)
520 250 22 30.0 45.0 41.5 37.5 1.0 70 72,800 1,540.0 20 24 4.47 15 71VW5220(1)00(2) R71VW5220(1)00(2)
630 275 0.010 4.0 9.0 13.0 10.0 0.6 400 504,000 4.0 93,979 0.17 61 71PF2100(1)30(2) R71PF2100(1)30(2)
630 275 0.015 4.0 9.0 13.0 10.0 0.6 400 504,000 6.0 92,653 0.21 61 71PF2150(1)30(2) R71PF2150(1)30(2)
630 275 0.022 4.0 9.0 13.0 10.0 0.6 400 504,000 8.8 91,809 0.25 61 71PF2220(1)30(2) R71PF2220(1)30(2)
630 275 0.033 5.0 11.0 13.0 10.0 0.6 400 504,000 13.2 91,206 0.32 57 71PF2330(1)00(2) R71PF2330(1)00(2)
630 275 0.047 5.0 11.0 13.0 10.0 0.6 400 504,000 18.8 9847 0.39 57 71PF2470(1)30(2) R71PF2470(1)30(2)
630 275 0.068 6.0 12.0 13.0 10.0 0.6 400 504,000 27.2 9585 0.47 55 71PF2680(1)30(2) R71PF2680(1)30(2)
630 275 0.10 6.0 12.0 13.0 10.0 0.6 400 504,000 40.0 9398 0.57 55 71PF3100(1)30(3) R71PF3100(1)30(3)
630 275 0.010 5.0 11.0 18.0 15.0 0.6 250 315,000 2.5 10 3,979 0.20 44 71PI2100(1)00(2) R71PI2100(1)00(2)
VDC VAC Cap
Value TH L
Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Apk nH mΩ Arms (°C/W) KEMET Internal
Part Number
Customer
Part Number
Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%.
(3) M = ±20% (only available tolerance).
(*) Irms value that leads to a ΔT of ≈ 7°C on the box surface > TBOX = TAMB + ΔT = 85°C + 7°C = 92°C
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%.
(3) M = ±20% (only available tolerance).
(*) Irms value that leads to a ΔT of ≈ 7°C on the box surface > TBOX = TAMB + ΔT = 85°C + 7°C = 92°C
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4
mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
630 275 0.015 5.0 11.0 18.0 15.0 0.6 250 315,000 3.8 10 2,653 0.25 44 71PI2150(1)00(2) R71PI2150(1)00(2)
630 275 0.022 5.0 11.0 18.0 15.0 0.6 250 315,000 5.5 10 1,809 0.30 44 71PI2220(1)00(2) R71PI2220(1)00(2)
630 275 0.033 5.0 11.0 18.0 15.0 0.6 250 315,000 8.3 10 1,206 0.37 44 71PI2330(1)00(2) R71PI2330(1)00(2)
630 275 0.047 5.0 11.0 18.0 15.0 0.6 250 315,000 11.8 10 847 0.44 44 71PI2470(1)00(2) R71PI2470(1)00(2)
630 275 0.068 5.0 11.0 18.0 15.0 0.6 250 315,000 17.0 10 585 0.53 44 71PI2680(1)00(2) R71PI2680(1)00(2)
630 275 0.10 5.0 11.0 18.0 15.0 0.6 250 315,000 25.0 10 398 0.64 44 71PI3100(1)30(2) R71PI3100(1)30(2)
630 275 0.15 6.0 12.0 18.0 15.0 0.6 250 315,000 37.5 10 371 0.67 43 71PI3150(1)30(2) R71PI3150(1)30(2)
630 275 0.15 6.0 17.5 18.0 15.0 0.6 250 315,000 37.5 10 371 0.71 38 71PI3150(1)40(2) R71PI3150(1)40(2)
630 275 0.22 7.5 13.5 18.0 15.0 0.6 250 315,000 55.0 10 253 0.83 41 71PI3220(1)30(2) R71PI3220(1)30(2)
630 275 0.22 6.0 17.5 18.0 15.0 0.6 250 315,000 55.0 10 253 0.86 38 71PI3220(1)10(2) R71PI3220(1)10(2)
630 275 0.22 9.0 12.5 18.0 15.0 0.6 250 315,000 55.0 10 253 0.82 42 71PI3220(1)20(2) R71PI3220(1)20(2)
630 275 0.33 8.5 14.5 18.0 15.0 0.6 250 315,000 82.5 10 169 1.02 40 71PI3330(1)30(2) R71PI3330(1)30(2)
630 275 0.33 7.5 18.5 18.0 15.0 0.8 250 315,000 82.5 10 169 1.07 37 71PI3330(1)10(2) R71PI3330(1)10(2)
630 275 0.33 9.0 12.5 18.0 15.0 0.6 250 315,000 82.5 10 169 1.00 42 71PI3330(1)40(3) R71PI3330(1)40(3)
630 275 0.33 13.0 12.0 18.0 15.0 0.8 250 315,000 82.5 10 169 0.99 43 71PI3330(1)20(2) R71PI3330(1)20(2)
630 275 0.47 7.5 18.5 18.0 15.0 0.8 250 315,000 117.5 10 119 1.28 37 71PI3470(1)40(3) R71PI3470(1)40(3)
630 275 0.47 10.0 16.0 18.0 15.0 0.8 250 315,000 117.5 10 119 1.24 39 71PI3470(1)30(3) R71PI3470(1)30(3)
630 275 0.68 11.0 19.0 18.0 15.0 0.8 250 315,000 170.0 10 105 1.36 37 71PI3680(1)30(3) R71PI3680(1)30(3)
630 275 0.15 6.0 15.0 26.5 22.5 0.8 160 201,600 24.0 16 477 0.71 30 71PN3150(1)00(2) R71PN3150(1)00(2)
630 275 0.22 6.0 15.0 26.5 22.5 0.8 160 201,600 35.2 16 326 0.86 30 71PN3220(1)00(2) R71PN3220(1)00(2)
630 275 0.33 6.0 15.0 26.5 22.5 0.8 160 201,600 52.8 16 217 1.05 30 71PN3330(1)30(2) R71PN3330(1)30(2)
630 275 0.47 7.0 16.0 26.5 22.5 0.8 160 201,600 75.2 16 203 1.09 29 71PN3470(1)30(2) R71PN3470(1)30(2)
630 275 0.68 10.0 18.5 26.5 22.5 0.8 160 201,600 108.8 16 140 1.35 28 71PN3680(1)30(2) R71PN3680(1)30(2)
630 275 1.0 10.0 18.5 26.5 22.5 0.8 160 201,600 160.0 16 95 1.63 28 71PN4100(1)40(3) R71PN4100(1)40(3)
630 275 1.0 11.0 20.0 26.5 22.5 0.8 160 201,600 160.0 16 95 1.65 27 71PN4100(1)30(2) R71PN4100(1)30(2)
630 275 0.68 9.0 17.0 32.0 27.5 0.8 115 144,900 78.2 18 176 1.28 25 71PR3680(1)00(2) R71PR3680(1)00(2)
630 275 1.0 11.0 20.0 32.0 27.5 0.8 115 144,900 115.0 18 119 1.58 24 71PR4100(1)00(2) R71PR4100(1)00(2)
630 275 1.5 13.0 22.0 32.0 27.5 0.8 115 144,900 172.5 18 80 1.97 23 71PR4150(1)00(2) R71PR4150(1)00(2)
630 275 2.2 14.0 28.0 32.0 27.5 0.8 115 144,900 253.0 18 54 2.48 21 71PR4220(1)00(2) R71PR4220(1)00(2)
630 275 3.3 18.0 33.0 32.0 27.5 0.8 115 144,900 379.5 18 36 3.12 20 71PR4330(1)00(2) R71PR4330(1)00(2)
630 275 4.7 22.0 37.0 32.0 27.5 0.8 115 144,900 540.5 18 25 3.81 19 71PR4470(1)00(2) R71PR4470(1)00(2)
630 275 1.5 11.0 22.0 41.5 37.5 1.0 80 100,800 120.0 20 80 2.19 19 71PW4150(1)00(2) R71PW4150(1)00(2)
630 275 2.2 13.0 24.0 41.5 37.5 1.0 80 100,800 176.0 20 54 2.68 18 71PW4220(1)00(2) R71PW4220(1)00(2)
630 275 3.3 16.0 28.5 41.5 37.5 1.0 80 100,800 264.0 20 36 3.37 17 71PW4330(1)00(2) R71PW4330(1)00(2)
630 275 4.7 19.0 32.0 41.5 37.5 1.0 80 100,800 376.0 20 71 2.45 17 71PW4470(1)00(2) R71PW4470(1)00(2)
630 275 6.8 20.0 40.0 41.5 37.5 1.0 80 100,800 544.0 20 49 3.05 16 71PW4680(1)00(2) R71PW4680(1)00(2)
630 275 10 24.0 44.0 41.5 37.5 1.0 80 100,800 800.0 20 43 3.32 15 71PW5100(1)00(2) R71PW5100(1)00(2)
630 275 15 30.0 45.0 41.5 37.5 1.0 80 100,800 1,200.0 20 29 4.08 15 71PW5150(1)00(2) R71PW5150(1)00(2)
1,000 275 0.22 9.0 17.0 32.0 27.5 0.8 180 360,000 39.6 18 543 0.73 25 71QR3220(1)00(2) R71QR3220(1)00(2)
1,000 275 0.27 9.0 17.0 32.0 27.5 0.8 180 360,000 48.6 18 442 0.80 25 71QR3270(1)00(2) R71QR3270(1)00(2)
1,000 275 0.33 9.0 17.0 32.0 27.5 0.8 180 360,000 59.4 18 362 0.89 25 71QR3330(1)10(2) R71QR3330(1)10(2)
1,000 275 0.33 11.0 20.0 32.0 27.5 0.8 180 360,000 59.4 18 362 0.91 24 71QR3330(1)00(2) R71QR3330(1)00(2)
1,000 275 0.39 9.0 17.0 32.0 27.5 0.8 180 360,000 70.2 18 306 0.97 25 71QR3390(1)10(2) R71QR3390(1)10(2)
1,000 275 0.39 11.0 20.0 32.0 27.5 0.8 180 360,000 70.2 18 306 0.99 24 71QR3390(1)00(2) R71QR3390(1)00(2)
1,000 275 0.47 9.0 17.0 32.0 27.5 0.8 180 360,000 84.6 18 254 1.06 25 71QR3470(1)10(2) R71QR3470(1)10(2)
1,000 275 0.47 13.0 22.0 32.0 27.5 0.8 180 360,000 84.6 18 254 1.10 23 71QR3470(1)00(2) R71QR3470(1)00(2)
1,000 275 0.56 9.0 17.0 32.0 27.5 0.8 180 360,000 100.8 18 213 1.16 25 71QR3560(1)10(2) R71QR3560(1)10(2)
1,000 275 0.56 13.0 22.0 32.0 27.5 0.8 180 360,000 100.8 18 213 1.20 23 71QR3560(1)00(2) R71QR3560(1)00(2)
1,000 275 0.68 11.0 20.0 32.0 27.5 0.8 180 360,000 122.4 18 176 1.31 24 71QR3680(1)10(2) R71QR3680(1)10(2)
1,000 275 0.68 14.0 28.0 32.0 27.5 0.8 180 360,000 122.4 18 176 1.38 21 71QR3680(1)00(2) R71QR3680(1)00(2)
1,000 275 0.82 11.0 20.0 32.0 27.5 0.8 180 360,000 147.6 18 146 1.43 24 71QR3820(1)10(2) R71QR3820(1)10(2)
VDC VAC Cap
Value TH L
Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Apk nH mΩ Arms (°C/W) KEMET Internal
Part Number
Customer
Part Number
Ipkr ESL ESR Irms max (*) Rth
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%.
(3) M = ±20% (only available tolerance).
(*) Irms value that leads to a ΔT of ≈ 7°C on the box surface > TBOX = TAMB + ΔT = 85°C + 7°C = 92°C
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4
mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
1,000 275 0.82 14.0 28.0 32.0 27.5 0.8 180 360,000 147.6 18 146 1.51 21 71QR3820(1)00(2) R71QR3820(1)00(2)
1,000 275 1.0 13.0 22.0 32.0 27.5 0.8 180 360,000 180.0 18 119 1.61 23 71QR4100(1)10(2) R71QR4100(1)10(2)
1,000 275 1.0 18.0 33.0 32.0 27.5 0.8 180 360,000 180.0 18 119 1.72 20 71QR4100(1)00(2) R71QR4100(1)00(2)
1,000 275 1.2 13.0 25.0 32.0 27.5 0.8 180 360,000 216.0 18 99 1.80 22 71QR4120(1)10(2) R71QR4120(1)10(2)
1,000 275 1.2 18.0 33.0 32.0 27.5 0.8 180 360,000 216.0 18 99 1.88 20 71QR4120(1)00(2) R71QR4120(1)00(2)
1,000 275 1.5 14.0 28.0 32.0 27.5 0.8 180 360,000 270.0 18 80 2.05 21 71QR4150(1)10(2) R71QR4150(1)10(2)
1,000 275 1.5 18.0 33.0 32.0 27.5 0.8 180 360,000 270.0 18 80 2.11 20 71QR4150(1)00(2) R71QR4150(1)00(2)
1,000 275 1.8 14.0 28.0 32.0 27.5 0.8 180 360,000 324.0 18 66 2.24 21 71QR4180(1)10(2) R71QR4180(1)10(2)
1,000 275 1.8 22.0 37.0 32.0 27.5 0.8 180 360,000 324.0 18 66 2.36 19 71QR4180(1)00(2) R71QR4180(1)00(2)
1,000 275 2.2 18.0 33.0 32.0 27.5 0.8 180 360,000 396.0 18 54 2.55 20 71QR4220(1)10(2) R71QR4220(1)10(2)
1,000 275 2.2 22.0 37.0 32.0 27.5 0.8 180 360,000 396.0 18 54 2.60 19 71QR4220(1)00(2) R71QR4220(1)00(2)
1,000 275 2.7 18.0 33.0 32.0 27.5 0.8 180 360,000 486.0 18 44 2.83 20 71QR4270(1)10(2) R71QR4270(1)10(2)
1,000 275 3.3 22.0 37.0 32.0 27.5 0.8 180 360,000 594.0 18 36 3.19 19 71QR4330(1)10(2) R71QR4330(1)10(2)
1,000 275 3.9 22.0 37.0 32.0 27.5 0.8 180 360,000 702.0 18 31 3.47 19 71QR4390(1)10(2) R71QR4390(1)10(2)
1,000 275 0.68 11.0 22.0 41.5 37.5 1.0 150 300,000 102.0 20 176 1.47 19 71QW3680(1)00(2) R71QW3680(1)00(2)
1,000 275 0.82 13.0 24.0 41.5 37.5 1.0 150 300,000 123.0 20 146 1.64 18 71QW3820(1)00(2) R71QW3820(1)00(2)
1,000 275 1.0 11.0 22.0 41.5 37.5 1.0 150 300,000 150.0 20 119 1.79 19 71QW4100(1)10(2) R71QW4100(1)10(2)
1,000 275 1.0 13.0 24.0 41.5 37.5 1.0 150 300,000 150.0 20 119 1.81 18 71QW4100(1)00(2) R71QW4100(1)00(2)
1,000 275 1.2 11.0 22.0 41.5 37.5 1.0 150 300,000 180.0 20 99 1.96 19 71QW4120(1)10(2) R71QW4120(1)10(2)
1,000 275 1.2 16.0 28.5 41.5 37.5 1.0 150 300,000 180.0 20 99 2.03 17 71QW4120(1)00(2) R71QW4120(1)00(2)
1,000 275 1.5 11.0 22.0 41.5 37.5 1.0 150 300,000 225.0 20 80 2.19 19 71QW4150(1)10(2) R71QW4150(1)10(2)
1,000 275 1.5 16.0 28.5 41.5 37.5 1.0 150 300,000 225.0 20 80 2.27 17 71QW4150(1)00(2) R71QW4150(1)00(2)
1,000 275 1.8 13.0 24.0 41.5 37.5 1.0 150 300,000 270.0 20 66 2.43 18 71QW4180(1)10(2) R71QW4180(1)10(2)
1,000 275 1.8 19.0 32.0 41.5 37.5 1.0 150 300,000 270.0 20 66 2.53 17 71QW4180(1)00(2) R71QW4180(1)00(2)
1,000 275 2.2 16.0 28.5 41.5 37.5 1.0 120 240,000 264.0 20 54 2.75 17 71QW4220(1)10(2) R71QW4220(1)10(2)
1,000 275 2.2 20.0 40.0 41.5 37.5 1.0 120 240,000 264.0 20 54 2.91 16 71QW4220(1)20(2) R71QW4220(1)20(2)
1,000 275 2.7 16.0 28.5 41.5 37.5 1.0 120 240,000 324.0 20 44 3.05 17 71QW4270(1)10(2) R71QW4270(1)10(2)
1,000 275 2.7 24.0 44.0 41.5 37.5 1.0 120 240,000 324.0 20 44 3.27 15 71QW4270(1)20(2) R71QW4270(1)20(2)
1,000 275 3.3 19.0 32.0 41.5 37.5 1.0 120 240,000 396.0 20 36 3.43 17 71QW4330(1)10(2) R71QW4330(1)10(2)
1,000 275 3.3 24.0 44.0 41.5 37.5 1.0 120 240,000 396.0 20 36 3.62 15 71QW4330(1)00(2) R71QW4330(1)00(2)
1,000 275 3.9 19.0 32.0 41.5 37.5 1.0 120 240,000 468.0 20 86 2.23 17 71QW4390(1)10(2) R71QW4390(1)10(2)
1,000 275 3.9 24.0 44.0 41.5 37.5 1.0 120 240,000 468.0 20 86 2.35 15 71QW4390(1)00(2) R71QW4390(1)00(2)
1,000 275 4.7 20.0 40.0 41.5 37.5 1.0 80 160,000 376.0 20 71 2.54 16 71QW4470(1)10(2) R71QW4470(1)10(2)
1,000 275 4.7 24.0 44.0 41.5 37.5 1.0 80 160,000 376.0 20 71 2.58 15 71QW4470(1)00(2) R71QW4470(1)00(2)
1,000 275 5.6 24.0 44.0 41.5 37.5 1.0 80 160,000 448.0 20 60 2.82 15 71QW4560(1)20(2) R71QW4560(1)20(2)
1,000 275 5.6 30.0 45.0 41.5 37.5 1.0 80 160,000 448.0 20 60 2.83 15 71QW4560(1)00(2) R71QW4560(1)00(2)
1,000 275 6.8 24.0 44.0 41.5 37.5 1.0 80 160,000 544.0 20 49 3.11 15 71QW4680(1)10(2) R71QW4680(1)10(2)
1,000 275 8.2 24.0 44.0 41.5 37.5 1.0 80 160,000 656.0 20 52 3.01 15 71QW4820(1)10(2) R71QW4820(1)10(2)
1,000 275 10.0 30.0 45.0 41.5 37.5 1.0 80 160,000 800.0 20 43 3.33 15 71QW5100(1)10(2) R71QW5100(1)10(2)
VDC VAC Cap
Value TH L
Lead
Spacing
(S)
Φd
(mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
Apk nH mΩ Arms (°C/W) KEMET Internal
Part Number
Customer
Part Number
Ipkr ESL ESR Irms max (*) Rth
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as a primary solder.
Thishasincreasedtheliquidustemperaturefromthatof183°CforSnPbeutecticalloyto217–221°Cforthenewalloys.Asa
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures.Polypropylenecapacitorsareespeciallysensitivetoheat(themeltingpointofpolypropyleneis160–170°C).
Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to
15mm),andgreatcarehastobetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.Please
consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid
guideline for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
above recommended limits may result in degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
The following is recommended for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum)withthe
soldering duration not to exceed more than 3
seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering Time (seconds)
Soldering Iron Bit Temperature (°C)
Wave Soldering Recommendations
0
50
100
150
200
250
300
0 40 80 120 160 200 240
Temperature (°C)
Time (seconds)
Cooling
2+3 seconds max
260°C
First Wave Second Wave
∆ T < 150°C
ca. 2°C/second
ca. 3.5°C/second typical
ca. 5°C/second
Preheating
T
preheat
Typical
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Soldering Process cont.
Wave Soldering Recommendations cont.
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1.
Dielectric Film
Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 270°C 270°C
Polypropylene 110°C 130°C 260°C 270°C
Paper 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene Sulphide 160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering.Greatcaremustbetakensothatthepartsarenotoverheated.
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Construction
Detailed Cross Section
Self-Extinguish-
ing Resin
Molded Plastic
Case
Molded Plastic
Case
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided Metallized
Polypropylene Film
(First Layer)
Margin
Margin
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Marking
Pitch – 7.5, 10, 15 & 22.5
Optional Pitch 7.5
Series
Series
Dielectric
Capacitance Capacitance
Tolerance Voltage
Code
Capacitance Capacitance
Tolerance Voltage
Code
Date Code
Can also be style “19-26”
(Year, Calendar Week)
Manufacturer’s
Logo
Manufacturer’s
Logo
Series
Manufacturer’s
Logo
Dielectric
Dielectric
Date Code
Date Code
Can also be style “19-26”
(Year, Calendar Week)
TOPFRONT
Capacitance Capacitance
Tolerance
Series Dielectric Voltage
Code
Date Code
Can also be style “19-26”
(Year, Calendar Week)
Manufacturer’s
Logo
Marking Variants*
* Differences are caused by technology (clichee, laser or ink jet) and technic (production line).
17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Marking cont.
Pitch – 7.5, 10, 15, 22.5, 27.5 & 37.5
TOPFRONT
Capacitance
Tolerance
Series
Dielectric
Manufacturer’s
Logo
Rated VoltageCapacitance
Date Code QA-Number
Series
Dielectric
Manufacturer’s
Logo
Rated VoltageCapacitance
Date Code
Hot marking imprinting
with or without color
Marking Variants*
Pitch – 22.5, 27.5 & 37.5
TOPFRONT
Series Dielectric
Manufacturer’s
Logo
Rated
Voltage
Capacitance
Capacitance
Tolerance
QA-Number
Date Code
Marking Variants*
* Differences are caused by technology (clichee, laser or ink jet) and technic (production line).
18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Marking cont.
Manufacturing Date Code (IEC–60062)
Year Code Month Code
2010
A
January
1
2011
B
February
2
2012
C
March
3
2013
D
April
4
2014
E
May
5
2015
F
June
6
2016
H
July
7
2017
J
August
8
2018
K
September
9
2019
L
October
O
2020
M
November
N
2021
N
December
D
2022
P
2023
R
2024
S
2025
T
2026
U
2027
V
2028
W
2029
X
2030
A
19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Packaging Quantities
Lead
Spacing
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
Lead and Packaging Code AA - JB
JE - JH JM 40 - 50 GY CK DQ
10
4.0
9.0
13.0
2,000
2,200
1,800
750
1,500
1,000
5.0
11.0
13.0
1,300
2,000
1,500
600
1,250
800
6.0
12.0
13.0
1,000
1,800
1,200
500
1,000
680
15
5.0
11.0
18.0
2,000
1,250
1,000
600
1,250
800
6.0
12.0
18.0
1,750
1,000
900
500
1,000
680
6.0
17.5
18.0
1,000
1,500
700
500
1,000
680
7.5
13.5
18.0
1,000
800
700
350
800
500
7.5
18.5
18.0
900
650
500
350
800
500
8.5
14.5
18.0
1,000
650
500
300
700
440
9.0
12.5
18.0
1,000
700
520
270
650
410
10.0
16.0
18.0
750
550
500
270
600
380
11.0
19.0
18.0
450
400
350
270
500
340
13.0
12.0
18.0
750
520
490
200
480
280
22.5
6.0
15.0
26.5
805
450
500
300
700
464
7.0
16.0
26.5
700
450
500
250
550
380
8.5
17.0
26.5
468
350
300
250
450
280
10.0
18.5
26.5
396
350
300
160
350
235
11.0
20.0
26.5
360
200
250
190
350
217
13.0
22.0
26.5
300
150
200
130
300
-
27.5
9.0
17.0
32.0
816
-
408
230
450
-
11.0
20.0
32.0
560
-
336
190
350
-
13.0
12.0
32.0
672
-
288
-
-
-
13.0
22.0
32.0
480
-
288
150
300
-
13.0
25.0
32.0
480
-
288
-
300
-
14.0
28.0
32.0
352
-
176
-
-
-
18.0
33.0
32.0
256
-
128
-
-
-
22.0
37.0
32.0
168
-
112
-
-
-
24.0
15.0
32.0
336
-
144
-
-
-
37.5
11.0
22.0
41.5
420
-
252
-
-
-
13.0
24.0
41.5
360
-
216
-
-
-
16.0
28.5
41.5
216
-
108
-
-
-
19.0
32.0
41.5
192
-
96
-
-
-
20.0
40.0
41.5
126
-
84
-
-
-
24.0
15.0
41.5
252
-
108
-
-
-
24.0
19.0
41.5
216
-
108
-
-
-
24.0
44.0
41.5
108
-
72
-
-
-
30.0
45.0
41.5
90
-
60
-
-
-
20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 10 & 15 mm Lead Spacing 22.5 & 27.5 mm
P1
P2
P0D0
H0
∆h∆h
Ød
W
A
t
B
W1
W0
W2
F
P
P1P2
P
A-B
Taping Specication
Description Symbol
Dimensions (mm)
Lead Spacing Tolerance
10.0
15.0
22.5
27.5
Lead wire diameter d 0.6 0.6 – 0.8 0.8 0.8 ±0.05
Taping lead space P25.4 25.4 38.1 38.1 ±1
Feedholeleadspace* P
0
12.7 12.7 12.7 12.7 ±0.2**
Centering of the lead wire P
1
7.7 5.2 7.8 5.3 ±0.7
Centering of the body P
2
12.7 12.7 19.05 19.05 ±1.3
Leadspacing*** F10.0 15.0 22.5 27.5 +0.6/−0.1
Component alignment Δh 0000±2
Component deviation Δp 0000±1
Height of component
from tape center H0**** 18.5 18.5 18.5 18.5 ±0.5
Carrier tape width W18 18 18 18 +1/−0.5
Hold down tape width W
0
910 10 10 Minimum
Hole position W
1
9999±0.5
Hold down tape position W
2
3333Maximum
Feed hole diameter D
0
4444±0.2
Total tape thickness t0.7 0.7 0.7 0.7 ±0.2
* Available also 15 mm.
** Maximum 1 mm on 20 lead spacing.
*** 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request.
**** H0 = 16.5 mm is available upon request.
21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
Lead Taping & Packaging (IEC 60286–2) cont.
Ammo Specications
Dimensions (mm)
HW T
360 340 59
Reel Specications
Dimensions (mm)
D H W
355
500
30
25
55 Maximum
D
W
H
H
T
W
22© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3030_R71 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R71, Single Metallized Polypropylene Film, Radial, SMPS PFC Applications
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.