SPECIFICATION CONTROL DRAWING Product Revision Product Name D-153-6001* A D-153-6002* A D-153-6003 A D-153-6004 A D-153-6005 A D-153-6006 A D-153-6007 A oA min. 9.0 (0.355) 12.0 (0.470) 15.0 (0.590) 18.0 (0.705) 21.0 (0.825) 25.0 (0.985) 30.0 (1.180) Product Dimensions B C max. min. 25.0 12.7 (0.985) (0.500) 25.0 17.7 (0.985) (0.695) 47.0 12.7 (1.185) (0.500) 47.0 12.7 (1.185) (0.500) 59.0 12.7 (2.320) (0.500) 59.0 12.7 (2.320) (0.500) 59.0 12.7 (2.320) (0.500) L max. 58.0 (2.285) 68.0 (2.700) 81.0 (3.200) 81.0 (3.200) 94.0 (3.700) 94.0 (3.700) 94.0 (3.700) Cable Dimensions oF oF M min. max. min. 5.0 8.4 10.0 (0.195) (0.330) (0.395) 7.0 11.4 10.0 (0.275) (0.450) (0.395) 10.2 14.3 12.5 (0.400) (0.560) (0.490) 12.3 17.0 12.5 (0.485) (0.670) (0.490) 14.7 19.8 15.0 (0.580) (0.780) (0.590) 17.5 23.7 15.0 (0.690) (0.935) (0.590) 21.0 28.6 15.0 (0.820) (1.125) (0.590) oE max. 9.0 (0.355) 12.0 (0.470) 15.0 (0.590) 18.0 (0.705) 21.0 (0.825) 25.0 (0.985) 30.0 (1.180) N max. 35.0 (1.380) 35.0 (1.380) 52.0 (2.050) 52.0 (2.050) 63.0 (2.480) 63.0 (2.480) 63.0 (2.480) * Parts without item (3). MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin high density. 2. SHIELD: Solder impregnated, flux coated, tin plated copper braid. SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. APPLICATION 1. These parts are designed to provide an in-line splice between the shield of cables, rated for 125C minimum, meeting the dimensional criteria listed, having tin, silver or nickel plated copper shields. 2. Temperature range: -55C to +135C. Install using Raychem-approved convection heating tools. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSHIELD* SPLICE DOCUMENT NO.: D-153-60XX DCR NUMBER: REPLACES: D981019 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 06/15/98 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None D15360XX SIZE: A SHEET: 1 of 1