3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering inform at io n call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050″ Surface Mount Right Angle Receptacle - Shielded 102 Series
Physical
Electrical
Environmental
Insulation Material:Glass Reinforced Polyester (P CT )
Flammability: UL 94V-0
Color: Beige
Contact Material: Copper Alloy
Plating
Underplating: 80 μ″ [ 2.0 μm ] Nickel
Wiping Area: 20 μ″ [ 0.50 μm ] Min. Gold
Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply)
Shroud and Latch Hook Material: Steel
Plating: Nickel
Grounding Flange Screw Lock Material: Copper Alloy
Plating: Tin
Marking: 3M Logo and Part Number
Current Rating: 1 A
Insulation Resistance: > 5 × 108Ω at 500 VDC
Withstanding Voltage: 500 VRMS for 1 Minute
Temperature Rating: -55°C to +105°C
Process Rating: 260°C (profile per J-STD-020C)
TS-0755-C
Sheet 1 of 3
• Wiper-on-wiper contact for reliable
repetitive plugging
• Ultra-low signal skew for high data rate
transmission
• Interface latch design for connection stability
• MDR digital LCD interface as a 20 or 26
contact connector
• Contacts: 14, 20, 26, 40 and 50
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: November 13, 2007
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050″ Surface Mount Right Angle Receptacle - Shielded 102 Series
Contact
Quantity Dimensions
A±.008 B±.006 C±.006 D±.006 E±.006
14 1.16 [ 29.5 ] .931 [ 23.64 ] .500 [ 12.70 ] .325 [ 8.26 ] .496 [ 12.6 ]
20 1.32 [ 33.4 ] 1.081 [ 27.45 ] .650 [ 16.51 ] .475 [ 12.07 ] .646 [ 16.4 ]
26 1.50 [ 38.2 ] 1.231 [ 31.26 ] .800 [ 20.32 ] .625 [ 15.88 ] .795 [ 20.2 ]
40 1.85 [ 47.1 ] 1.581 [ 40.15 ] 1.150 [ 29.21 ] .975 [ 24.77 ] 1.150 [ 29.2 ]
50 2.06 [ 52.4 ] 1.831 [ 46.50 ] 1.400 [ 35.56 ] 1.225 [ 31.12 ] 1.398 [ 35.5 ]
102XX-1210PE
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] D im ensions for R eference
Onl
y
Tolerance Unless Noted
[mm]
Inch
TS-0755-C
Sheet 2 of 3
Contact Quantity
(See Table)
Ordering Information
Note: Use ( M2.5x8 mm ) screws to mount to panel with max. thickness of .079 [ 2.0 ].
Position 1
C
B
.189 [ 4.80 ]
last position
2X M2.5 Thread
(see note in ordering info)
.248
[ 6.30 ]
Positioning Boss (2x)
Position
A
E
D
.394
[ 10.00 ]
.203
[ 5.15 ]
2X .138
[ 3.5 ]
.025 [ 0.635 ]
.010 nom.
[ 0.25 ]
.19
[ 4.8 ]
.368
[ 9.35 ]
.187
[ 4.75 ]
2X M2.5 Thread
last position
position above last
position
position belo w
pos. 1
position 1
position 2 .047
[ 1.20 ]
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
26
3M™ Mini D Ribbon (MDR) Connectors
.050″ Surfacemount Right Angle Receptacle - Shielded 102 Series
Contact
Quantity Dimensions
A ± .002 B ± .002 C ± .002
14 .931 [ 23.64 ] .500 [ 12.70 ] .325 [ 8.26 ]
20 1.081 [ 27.45 ] .650 [ 16.51 ] .475 [ 12.07 ]
26 1.230 [ 31.26 ] .800 [ 20.32 ] .625 [ 15.88 ]
40 1.581 [ 40.15 ] 1.150 [ 29.21 ] .975 [ 24.77 ]
50 1.831 [ 46.50 ] 1.400 [ 35.56 ] 1.225 [ 31.12 ]
Contact
Quantity DE
14 .78 [ 19.9 ] .931 [ 23.64 ]
20 .94 [ 23.8 ] 1.081 [ 27.45 ]
26 1.09 [ 27.6 ] 1.231 [ 31.26 ]
40 1.44 [ 36.5 ] 1.581 [ 40.15 ]
50 1.69 [ 42.8 ] 1.830 [ 46.50 ]
Recommended Board Layout
A
C
.0250 ± .0008 [ 0.64 ]
B
PCB Ref. Edge
.0158 ± .0004 [ 0.40 ]
.093 ± .004 [ 2.36 ]
.088 [ 2.223 ] .187 max.
[ 4.75 ]
.165 [ 4.2 ]
.118 [ 3.0 ]
2x .122 [ 3.1 ]
2x .138 [ 3.5 ]
2x .256 [ 6.5 ]
Solder Pads for Solder
Tail (See below for
more detail)
∅ .079 + .004 (2X)
Positioning Hole
(viewed from connector side)
center spacing
- .000
center sp acing
Lockstand Solder
Pad Outline
∅ .110 ± .004 (2X)
Screw Lock
(see notes below)
Notes:
1. Plated through mounting holes for .062″ [1.57] board thickness.
2. The connector should be fi xed to t he PCB by screws, tools or ot he r
means during the soldering process. To prevent soldering defects, the
screws (M2.5) should not be tightened excessively.
3. The connector must be fixed t o the P CB by boa rd lock screws af te r
soldering. The connect or should be fixed to the panel with pan el mount
screws or jack sockets. See TS-0142 f or mounting hardware.
TS-0755-C
Sheet 3 of 3
Recommended Panel Cut-out
D ± .004
E ± .004
R .060
[ 1.50 ]
Note: Panel thickness .079 [ 2.00 ] Max.
.319 ± .004
[ 8.1 ]
Connector Position
(Top Row)
20 19 18 17 16 15 14 13 12 11
10 987654321
PCB Ref. Edge
20 Pos.
23
10987
22 21 20 19 18 17 16 15 14
654321
30 29 28 27 26 25 24 23 22 2140 39 38 37 36 35 34 33 32 31
1098765432120 1119 18 17 16 15 14 13 12
PCB Ref. Edge
PCB Ref. Edge
25 24
13 12 11
26 Pos.
40 Pos.
Solder Pad and Contact Numbering Detail
(Pad numbers correspond to connector contact numbers shown on previous page)
Last
Pos.
Last
Pos.
Last
Pos.
Connector Position
(Top Row)
Connector
Position
Position
(Bottom Row)
Position
(Bottom Row)
Position
(Bottom Row)
34
10 9 8 7
33 32 31 30 29 28 27 26
49
654321
PCB Ref. Edge
44
20
43 42 41 40 39 38 37 36 35
11
50 Pos. 19 18 17 16 15 14 13 12
Last
Pos.
Connector
Position
Position
(Bottom Row)
22 21
23
24
45
464748
25
50
Connector Position
(Top Row)
10 9 8
7
14 13 12 11
654321
PCB Ref. Edge
14 Pos.
Last
Pos. Position
(Bottom Row)
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-c
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
RIA-2217B-c
3
3M Electronics
Interconnect Products
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects 3M is a trademark of 3M Company.
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
