MICRO SWITCHTM Medium-Duty Limit Switches E7 and V7 Series Datasheet MICRO SWITCHTM E7 and V7 Series Medium-Duty Limit Switches Honeywell MICRO SWITCHTM E7/V7 Series medium duty limit switches are designed for a wide variety of indoor and outdoor applications. Typical applications include equipment for commercial, industrial, and transportation industries. The electrostatic applied epoxy coating to the aluminum housings enhances the durability of the product in most applications. The E7/V7 family of switches incorporates the Honeywell MICRO SWITCHTM BZ switch element which has the reliable snap-spring mechanism with more than 60 years of proven service. The sealed (plungers with boots) E7/V7 Series are preferred for applications where there could be exposure to liquid and/or particulate environments. The unsealed E7/V7 Series are ideal for applications where there will not be exposure to liquid or dust environments. The compact size of the limit switch permits installation where there is limited space available on equipment. The SPDT (Single Pole Double Throw) E7/E7S/V7/E9 Series of catalog listings are certified to CE and CSA for worldwide applications. While the DPDT (Double Pole Double Throw) E7/E7S/V7/E9 Series of catalog listings are certified to CE for many applications. What makes our switches better? Designed with MICRO SWITCHTM BZ or DT basic switches to deliver precise switching of electrical and mechanical operating characteristics Rugged, epoxy-coated aluminum housing for indoor and outdoor applications Small footprint with easy access to wiring terminals Available in a configuration suited to the application with variety of actuators, circuitries, conduits, and mounting options HIGH PERFORMANCE * DURABILITY CUSTOMIZATION * EASY TO INSTALL 2 sensing.honeywell.com Features and Benefits DESIGNED FOR DEMANDING ENVIRONMENTS AND APPLICATIONS MICRO SWITCHTM E7/V7 Series switches include a wide variety of actuators and feature an electrostatic epoxy coated aluminum housing for durability in a wide range of applications. The products are engineered with MICRO SWITCHTM BZ or DT internal basic switches that have years of proven service. Side and flange mounting options RELIABLY HANDLES ELECTRICAL LOADS The E7/V7 Series are available with SPDT contacts or DPDT contacts with momentary action to meet circuit requirements. The BZE/BZV Series with SPDT contacts is rated for AC15, A300 and DC13, Q300 for typical ac and dc applications. The DTE Series with DPDT contacts is rated for AC15, B300 and DC13, R300 for typical ac and dc applications. An internal ground screw is provided to meet electrical codes as required. DESIGN FLEXIBILITY These limit switches are offered with multiple connectivity options: two different conduit offerings, with single or double conduits. GLOBAL APPROVALS The BZE7, BZE7S, BZV7, and BZE9 Series with SPDT (single-pole double throw) contacts are certified to CE and CSA for worldwide applications. The DTE7 and DTE7S Series with DPDT (double-pole double throw) contacts are certified to CE for many uses. INDOOR AND OUTDOOR OPTIONS The Series' temperature range of -30 C to 70 C [-22 F to 158 F] makes the switch well suited for a wide range of indoor and outdoor applications. sensing.honeywell.com 3 Potential Applications INDUSTRIAL * Escalator obstruction detection - Roller actuator mounted behind skirt on escalators, if activated, power to the escalator is cut to avoid injury * Air curtain - A component in a circuit for control of air stream * Door or gate position - Can provide a signal when a door or gate is opened or closed * Commercial food processing - For large scale food preparation, to ensure all features are in the desired operating position TRANSPORTATION * Traffic barrier signaling - If traffic barrier lowers, signal lights can be activated Figure 1. MICRO SWITCHTM E7/V7 Features and Options Wide variety of actuators and operating characteristics Hardened steel plunger for long life Stainless steel roller Wide variety of actuators and operating characteristics Diaphragm plunger seal for long life Captive screws (2) Captive screws (2) Switch assembly can be rotated 180 on bottom enclosure Switch assembly can be rotated 180 on bottom enclosure Terminal screws of switch easily accessed with housing removed Terminal screws of switch easily accessed with enclosure removal Double conduit option for through wiring One piece molded rubber insulator seal Rugged aluminum enclosure epoxy coated for environmental durability Internal ground screw provided in bottom enclosure Threaded conduit Rugged aluminum enclosure epoxy coated for environmental durability One piece molded rubber insulator seal Internal ground screw provided in enclosure Threaded conduit Typical switch assembly, flange mount, without boot sealed actuator Typical switch assembly, side mount, with boot sealed plunger Four mounting options Diagonal side mount (E7 Series) Side mount on 25,4 mm centers (E7S Series) Side mount on 76 mm centers with double conduit (E9 Series) Flange mount (V7 Series) 4 sensing.honeywell.com MICRO SWITCHTM Medium-Duty Limit Switches Table 1. Specifications Characteristic Parameter top pin plunger (boot sealed or standard type); inline roller plunger (boot sealed or standard type); cross roller plunger (boot sealed or standard type); roller lever adjustable (boot sealed or standard type); one-way roller lever adjustable (boot sealed); coil spring wobble (boot sealed) Actuators diagonal side mount with single conduit (E7 type); diagonal side mount or side mount with single conduit (E7S type), side mount with double conduit (E9 type) flange mount with single conduit (V7 type) Enclosure type Housing material electrostatic epoxy coated aluminum Termination threaded conduit, 20 mm or PG 13,5 actuator with boot seal: IP65 actuator (QN8 style) with internal plunger seal: IP65 actuator without boot seal or internal plunger seal: IP50 Sealing SPDT (snap-action contacts) 1NC/1NO, same polarity DPDT (snap-action contacts) 2NC/2NO, each pole same polarity Switching options Operating temperature -30 C to 70 C [-22 F to 158 F] Electrical rating see tables 2 and 3 Rated impulse voltage Ui 1.5 kV Pollution degree (with enclosure) 1 (DTE Series); 2 (BZE and BZV Series) Agency certifications EN/IEC 60947-5-1 (all Series); CSA file 15775 (BZ prefix only) Table 2. BZE and BZV Series Electrical Ratings: EN60947-5-1, IEC 60947-5-1 Designation & Category Thermal Current, It (Amps) Rated Operational Voltage, Ue Rated Operational Amps, Ie VA Rating Make VA Rating Break AC15, A300 10 120 6 7200 720 AC15, A300 10 240 3 7200 720 DC13, Q300 10 125 0.55 69 69 DC13, Q300 10 250 0.27 69 69 Table 3. DTE Electrical Ratings: EN60947-5-1, IEC 60947-5-1 Designation & Category Thermal Current, It (Amps) Rated Operational Voltage, Ue Rated Operational Amps, Ie VA Rating Make VA Rating Break AC15, B300 5 120 3 3600 360 AC15, B300 5 240 1.5 3600 360 DC13, R300 5 125 0.22 28 28 DC13, R300 5 250 0.1 28 28 Table 4. Switching SPDT (BZE and BZV Series) C NC NO DPDT (DTE Series) C NC NO C NC NO sensing.honeywell.com 5 E7 and V7 Series PRODUCT NOMENCLATURE BZ E7 Switch Type Enclosure Type BZ Series Basic Switch, E7 SPDT V7 DT Series E7S Basic Switch2, DPDT E9 -- Diagonal side mount w/ single conduit entry2 2 R Internal Base Switch Construction Contact 2 Standard (single break) R Standard Flange mount version of E7 Side mount w/ single conduit entry*2 Side mount w/ double conduit entry * mounting holes provide interchangeability with BZE6 products 1 2 3 6 NOTE: not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance. DT Series basic switch available with enclosure type E7 or E7S only. With "Q" style plunger only. sensing.honeywell.com N 2 Plunger Type Actuator Code -- Pin plunger N Seal boot Q No seal boot (blank) Inline roller plunger internal QN with plunger seal 3 2 Adjustable roller lever 8 Roller plunger 80 9 Inline roller plunger with removeable roller3 Coil spring 18 wobble stick One-way 28 roller lever Cross 81 roller plunger C Conduit Thread PG C PG 13,5 mm conduit 20 mm conduit MICRO SWITCHTM Medium-Duty Limit Switches Over Travel min. mm [in] Differential Travel max. mm [in] 38,58 0,76 [1.519 0.030] 1,98 [0.078] 5,56 [0.219] 0,05 20 mm [0.002] BZE7-2RN-PG BZ, A300, SPDT Q300 255 to 680 [9 to 24] 38,58 0,76 [1.519 0.030] 1,98 [0.078] 5,56 [0.219] 0,05 [0.002] DTE7-2RN-C DT, B300, DPDT R300 454 to 1389 [16 to 49] 40,95 1,14 [1.612 0.045] 3,18 [0.125] 3,18 [0.125] 1,78 20 mm [0.070] Pin Plunger (see Figure 1) B300, R300 A300, Q300 A300, Q300 B300, R300 B300, R300 454 to 1389 [16 to 49] 3628 [128] max. 3628 [128] max. 3628 [128] max. 3628 [128] max. 40,95 1,14 [1.612 0.045] 59,56 1,19 [2.345 0.047] 59,56 1,19 [2.345 0.047] 59,31 1,19 [2.335 0.047] 59,31 1,19 [2.335 0.047] 3,18 [0.125] 3,81 [0.150] 3,81 [0.150] 4,06 [0.160] 4,06 [0.160] 3,18 [0.125] 3,18 [0.125] 3,18 [0.125] 3,18 [0.125] 3,18 [0.125] 1,78 PG [0.070] 13,5 0,05 20 mm [0.002] 0,05 PG [0.002] 13,5 1,65 20 mm [0.065] 1,65 PG [0.065] 13,5 BZE7-2RN2-C BZ, A300, SPDT Q300 284 to 567 [10 to 20] 66,34 [2.612] Ref 4,78 [0.188] 5,56 [0.219] 0,20 20 mm [0.008] BZE7-2RN2-PG BZ, A300, SPDT Q300 284 to 567 [10 to 20] 66,34 [2.612] Ref 4,78 [0.188] 5,56 [0.219] 0,20 [0.008] DTE7-2RN2-C DT, B300, DPDT R300 1134 [40] max. 64,36 [2.534] Ref 6,76 [0.266] 5,56 [0.219] 4,19 20 mm [0.165] DTE7-2RN2-PG DT, B300, DPDT R300 1134 [40] max. 64,36 [2.534] Ref 6,76 [0.266] 5,56 [0.219] 4,19 [0.165] BZE7-2RN28-C BZ, A300, SPDT Q300 284 to 567 [10 to 20] - 5,94 [0.234] 5,56 [0.219] 0,15 20 mm [0.006] BZE7-2RN28-PG BZ, A300, SPDT Q300 284 to 567 [10 to 20] - 5,94 [0.234] 5,56 [0.219] 0,15 [0.006] DTE7-2RN28-C DT, B300, DPDT R300 1134 [40] max. - 6,76 [0.266] 5,56 [0.219] 4,19 20 mm [0.165] BZE7-2RN18-C BZ, A300, SPDT Q300 - - 15 20 Ref - 20 mm BZE7-2RN18-PG BZ, A300, SPDT Q300 - - 15 20 Ref - PG 13,5 DT, DPDT BZ, BZE7-2RQN8-C SPDT BZ, BZE7-2RQN8-PG SPDT DT, DTE7-2RQN8-C DPDT Inline Roller Plunger DT, (see Figure 2) DTE7-2RQN8-PG DPDT Roller Lever (see Figure 3) One-way Roller Lever (see Figure 4) Coil-Spring Wobble (see Figure 5) DTE7-2RN-PG Comments Pretravel max. mm [in] 255 to 680 [9 to 24] Conduit Thread Operate Point mm [in] BZ, A300, SPDT Q300 Electrical Rating [page 5] BZE7-2RN-C Catalog Listing Switch type, Circuitry Operate Force g [oz] Table 5. Order Guide * E7 Diagonal Side Mount with Sealed Actuator For catalog listings not shown, please contact your Honeywell distributor or representative. PG 13,5 Roller plunger assembly can be positioned at 90 increments PG 13,5 PG 13,5 PG 13,5 sensing.honeywell.com 7 E7 and V7 Series DIMENSIONS Figure 1. E7 Series, top pin plunger, diagonal mount with boot seal 1,93 [0.076] pretravel Figure 2. E7 Series, inline roller plunger, diagonal mount, sealed 3,8 [0.15] pretravel O 8,38 [O 0.33] O 16,66 x 4,95 wide roller [O 0.656 x 0.195] Internal plunger seal 38,58 OP [1.519] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 59,56 OP [2.345] 4,06 [0.16] 68,28 [2.69] 76,40 [3.01] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] O 14,73 [O 0.58] 5,84 [0.23] O 16,0 [O 0.63] 25,4 [1.00] 12,7 [0.50] conduit centerline O 14,73 [O 0.58] 5,84 [0.23] 4,06 [0.16] Figure 3. E7 Series, roller lever, diagonal mount with boot seal O 19,05 x 7,92 wide roller [O 0.75 x 0.312] 39,88 [1.57] 18,29 [0.72] 76,40 [3.01] Figure 4. E7 Series, one-way roller lever, diagonal mount with boot seal 39,6 [1.56] 24,38 [0.91] 225 12,7 [0.50] conduit centerline 62,28 [2.69] 180 O 19,0 [0.75] x 7,9 [0.31] W roller 18,3 [0.72] 32,26 [1.27] 48,11 [1.894] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 48,11 [1.894] O 14,73 [O 0.58] 5,84 [0.23] 4,06 [0.16] 62,28 [2.69] 12,7 [0.50] conduit centerline (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] O 14,73 [O 0.58] 76,40 [3.01] Figure 5. E7 Series, coil wobble, diagonal mount with boot seal 5,84 [0.23] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] 151,13 [5.95] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 5,84 [0.23] O 14,73 [O 0.58] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] 8 sensing.honeywell.com 12,7 [0.50] conduit centerline 12,7 [0.50] conduit centerline MICRO SWITCHTM Medium-Duty Limit Switches Over Travel min. mm [in] Differential Travel max. mm [in] 28,70 0,76 [1.30 0.030] 0,38 [0.015] 5,56 [0.219] 0,05 20 mm [0.002] Pin Plunger (see Figure 6) BZE7-2RQ-PG BZ, A300, SPDT Q300 255 to 369 [9 to 13] 28,70 0,76 [1.30 0.030] 0,38 [0.015] 5,56 [0.219] 0,05 [0.002] BZ, SPDT BZ, SPDT BZ, SPDT BZ, SPDT A300, Q300 A300, Q300 A300, Q300 A300, Q300 255 to 369 [9 to 13] 255 to 369 [9 to 13] 255 to 369 [9 to 13] 255 to 369 [9 to 13] 44,53 1,19 [1.753 0.047] 44,53 1,19 [1.753 0.047] 44,53 1,19 [1.753 0.047] 44,53 1,19 [1.753 0.047] 0,38 [0.015] 0,38 [0.015] 0,38 [0.015] 0,38 [0.015] 3,56 [0.140] 3,56 [0.140] 3,56 [0.140] 3,56 [0.140] 0,05 20 mm [0.002] 0,05 PG [0.002] 13,5 0,05 20 mm [0.002] 0,05 PG [0.002] 13,5 BZE7-2RQ81-C BZ, A300, SPDT Q300 255 to 369 [9 to 13] 44,53 1,19 [1.753 0.047] 0,38 [0.015] 3,56 [0.140] 0,05 20 mm [0.002] BZE7-2RQ81-PG BZ, A300, SPDT Q300 255 to 369 [9 to 13] 44,53 1,19 [1.753 0.047] 0,38 [0.015] 3,56 [0.140] 0,05 [0.002] BZE7-2RQ2-C BZ, A300, SPDT Q300 284 to 510 [10 to 18] 56,03 [2.206] Ref. 4,78 [0.188] 5,56 [0.219] 0,15 20 mm [0.006] BZE7-2RQ2-PG BZ, A300, SPDT Q300 284 to 510 [10 to 18] 56,03 [2.206] Ref. 4,78 [0.188] 5,56 [0.219] 0,15 [0.006] BZE7-2RQ8-C BZE7-2RQ8-PG BZE7-2RQ9-C 1 Inline Roller Plunger (see Figure 7) Cross Roller Plunger (see Figure 8) Roller Lever (see Figure 9) 1 BZE7-2RQ9-PG 1 Comments Pretravel max. mm [in] 255 to 369 [9 to 13] Conduit Thread Operate Point mm [in] BZ, A300, SPDT Q300 Electrical Rating [page 5] BZE7-2RQ-C Catalog Listing Switch type, Circuitry Operate Force g [oz] Table 6. Order Guide * E7 Series Switches, Diagonal Mount without Boot Sealed Actuator For catalog listings not shown, please contact your Honeywell distributor or representative. PG 13,5 Removable roller Removable roller PG 13,5 PG 13,5 With roller removed, plunger can be rotated 90 and roller re-assembled for a cross roller plunger. sensing.honeywell.com 9 E7 and V7 Series DIMENSIONS Figure 6. E7 Series, top pin plunger, diagonal mount 0,38 [0.015] pretravel Figure 7. E7 Series, inline roller plunger, diagonal mount 0,4 [0.015] pretravel O 8,38 [O 0.33] O 12,7 x 4,5 wide roller [O 0.50 x 0.18] 33,02 OP [1.30] 13,97 [0.55] (2) O 5,16 [O 0.203] mounting holes 25,4 [1.00] O 14,73 [O 0.58] 5,84 [0.23] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] 12,7 [0.50] conduit centerline 44,5 OP [1.75] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] O 14,73 [O 0.58] 5,84 [0.23] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] Figure 8. E7 Series, cross roller plunger, diagonal mount Figure 9. E7 Series, roller lever, diagonal mount 225 44,53 OP [1.75] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 5,84 [0.23] O 14,73 [O 0.58] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] O 19,0 [0.75] x 7,9 [0.312] W roller 39,6 [1.57] O 12,7 x 4,57 [O 0.50 x 0.18] wide roller 0,38 [0.015] pretravel 12,7 [0.50] conduit centerline 37,8 [1.49] 18,3 [0.72] 23,1 [0.91] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 5,84 [0.23] O 14,73 [O 0.58] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] 10 sensing.honeywell.com 12,7 [0.50] conduit centerline 12,7 [0.50] conduit centerline MICRO SWITCHTM Medium-Duty Limit Switches A300, Q300 A300, Q300 A300, Q300 B300, R300 255 to 680 [9 to 24] 255 to 680 [9 to 24] 255 to 680 [9 to 24] 454 to 1389 [16 to 49] 43,66 0,89 [1.719 0.035] 43,66 0,89 [1.719 0.035] 43,66 0,89 [1.719 0.035] 46,02 1,27 [1.812 0.050] 1,98 [0.078] 1,98 [0.078] 1,98 [0.078] 3,18 [0.125] 5,56 [0.219] 5,56 [0.219] 5,56 [0.219] 3,18 [0.125] 0,05 0.5-14 [0.002] NPSM 0,05 20 mm [0.002] 0,05 PG [0.002] 13,5 1,78 20 mm [0.070] BZ, A300, SPDT Q300 3628 [128] max. 64,64 1,32 [2.545 0.052] 3,81 [0.150] 3,18 [0.125] 0,05 20 mm [0.002] DT, B300, Inline Roller Plunger DTE7S-2RQN8-C DPDT R300 (see Figure 11) 3628 [128] max. 64,39 1,32 [2.535 0.052] 4,06 [0.160] 3,18 [0.125] 1,65 20 mm [0.065] BZE7S-2RN2-C BZ, A300, SPDT Q300 284 to 567 [10 to 20] 71,42 [2.812 ] Ref. 4,76 [0.188] 5,56 [0.219] 0,15 20 mm [0.006] BZE7S-2RN2-PG BZ, A300, SPDT Q300 284 to 567 [10 to 20] 71,42 [2.812 ] Ref. 4,76 [0.188] 5,56 [0.219] 0,15 [0.006] DTE7S-2RN2-C DT, B300, DPDT R300 1134 [40] max. 69,44 [2.734 ] Ref. 6,76 [0.266] 5,56 [0.219] 4,19 20 mm [0.165] BZE7S-2RN28-C BZ, A300, SPDT Q300 227 to 567 [8 to 20] - 5,94 [0.234] 5,56 [0.219] 0,15 20 mm [0.006] BZE7S-2RQN8-C Roller Lever (see Figure 12) Comments Differential Travel max. mm [in] BZ, SPDT BZ, SPDT BZ, SPDT DT, DPDT Conduit Thread Over Travel min. mm [in] DTE7S-2RN-C Pretravel max. mm [in] BZE7S-2RN-PG Pin Plunger (see Figure 10) Operate Point mm [in] BZE7S-2RN-C Operate Force g [oz] BZE7S-2RN Electrical Rating [page 5] Catalog Listing Switch type, Circuitry Table 7. Order Guide * E7S Series Switches, Side or Diagonal Mount with Sealed Actuator For catalog listings not shown, please contact your Honeywell distributor or representative. Roller plunger assembly can be positioned at 90 increments PG 13,5 One-Way Roller Lever (see Figure 13) sensing.honeywell.com 11 E7 and V7 Series DIMENSIONS Figure 10. E7S Series, top pin plunger, side mount with boot seal 1,93 [0.076] pretravel Figure 11. E7S Series, inline roller plunger, side mount, sealed 3,8 [0.15] pretravel O 8,38 [O 0.33] O 16,66 x 4,95 wide roller [O 0.656 x 0.195] Internal plunger seal 38,58 [1.519] OP (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] O 16,0 [O 0.63] 59,56 OP [2.345] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 25,4 [1.00] 5,84 [0.23] 4,06 [0.16] O 14,73 [O 0.58] 25,4 [1.00] 12,7 [0.50] conduit centerline 62,28 [2.69] 76,40 [3.01] 25,4 [1.00] 5,84 [0.23] 4,06 [0.16] O 14,73 [O 0.58] 12,7 [0.50] conduit centerline 62,28 [2.69] 76,40 [3.01] Figure 12. E7S Series, roller lever, side mount with boot seal O 19,05 x 7,92 wide roller [O 0.75 x 0.312] 39,88 [1.57] 18,29 [0.72] 48,11 [1.894] 5,84 [0.23] 180 (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 4,06 [0.16] O 14,73 [O 0.58] 62,28 [2.69] 76,40 [3.01] 12,7 [0.50] conduit centerline O 19,0 [0.75] x 7,9 [0.31] W roller 39,6 [1.56] 24,38 [0.91] 225 25,4 [1.00] Figure 13. E7S Series, one-way roller lever, side mount with boot seal 18,3 [0.72] 32,26 [1.27] 48,11 [1.894] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 5,84 [0.23] O 14,73 [O 0.58] 25,4 [1.00] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] 12 sensing.honeywell.com 12,7 [0.50] conduit centerline MICRO SWITCHTM Medium-Duty Limit Switches Over Travel min. mm [in] Differential Travel max. mm [in] 38,1 0,89 [1.5 0.035] 0,38 [0.015] 5,56 [0.219] 0,05 20 mm [0.002] Pin Plunger (see Figure 14) BZE7S-2RQ-PG BZ, A300, SPDT Q300 255 to 369 [9 to 13] 38,1 0,89 [1.5 0.035] 0,38 [0.015] 5,56 [0.219] 0,05 [0.002] BZ, SPDT BZ, SPDT BZ, SPDT A300, Q300 A300, Q300 A300, Q300 255 to 369 [9 to 13] 255 to 369 [9 to 13] 255 to 369 [9 to 13] 49,61 1,32 [1.953 0.052] 49,61 1,32 [1.953 0.052] 49,61 1,32 [1.953 0.052] 0,38 [0.015] 0,38 [0.015] 0,38 [0.015] 3,56 [0.14] 3,56 [0.14] 3,56 [0.14] 0,05 20 mm [0.002] 0,05 PG [0.002] 13,5 0,05 20 mm [0.002] DTE7S-2RQ9-C DT, B300, DPDT R300 680 to 1361 [24 to 48] 49,61 1,19 [1.953 0.047] 3,56 [0.14] 3,18 [0.125] 1,65 20 mm [0.065] DTE7S-2RQ9-PG DT, B300, DPDT R300 680 to 1361 [24 to 48] 49,61 1,19 [1.953 0.047] 3,56 [0.14] 3,18 [0.125] 1,65 [0.066] BZE7S-2RQ81-C BZ, A300, SPDT Q300 255 to 369 [9 to 13] 49,61 1,32 [1.953 0.052] 0,38 [0.015] 3,56 [0.14] 0,05 20 mm [0.002] BZE7S-2RQ2-C BZ, A300, SPDT Q300 284 to 510 [10 to 18] 61,11 [2.406] Ref 4,78 [0.188] 5,56 [0.219] 0,15 20 mm [0.006] BZE7S-2RQ8-C BZE7S-2RQ8-PG BZE7S-2RQ9-C1 Inline Roller Plunger (see Figure 15) Comments Pretravel max. mm [in] 255 to 369 [9 to 13] Conduit Thread Operate Point mm [in] BZ, A300, SPDT Q300 Electrical Rating [page 5] BZE7S-2RQ-C Catalog Listing Switch type, Circuitry Operate Force g [oz] Table 8. Order Guide * E7S Series Switches, Side or Diagonal Mount without Boot Sealed Actuator For catalog listings not shown, please contact your Honeywell distributor or representative. PG 13,5 PG 13,5 Removable roller Roller plunger may be rotated to any position around C/L of plunger Cross Roller Plunger (see Figure 16) Roller Lever (see Figure 17) 1 With roller removed, plunger can be rotated 90 and roller re-assembled for a cross roller plunger. sensing.honeywell.com 13 E7 and V7 Series DIMENSIONS Figure 14. E7S Series, top pin plunger, side mount 0,38 [0.015] pretravel O 12,7 x 4,5 wide roller [O 0.50 x 0.18] (2) O 5,16 [O 0.203] mounting holes 25,4 [1.00] 25,4 [1.00] 5,84 [0.23] 0,4 [0.015] pretravel O 8,38 [O 0.33] 33,02 OP [1.30] 13,97 [0.55] 4,06 [0.16] O 14,73 [O 0.58] 62,28 [2.69] 76,40 [3.01] Figure 15. E7S Series, inline roller plunger, side mount 12,7 [0.50] conduit centerline 44,5 OP [1.75] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] O 14,73 [O 0.58] 25,4 [1.00] 5,84 [0.23] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] Figure 16. E7S Series, cross roller lever, side mount Figure 17. E7S Series, roller lever, side mount O 12,7 x 4,57 [O 0.50 x 0.18] Wide roller 0,38 [0.015] pretravel (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 5,84 [0.23] O 14,73 [O 0.58] 25,4 [1.00] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] O 19,0 [0.75] x 7,9 [0.312] W roller 39,6 [1.57] 225 44,53 OP [1.75] 12,7 [0.50] conduit centerline 37,8 [1.49] 18,3 [0.72] 23,1 [0.91] (2) O 5,16 [O 0.203] mounting holes 13,97 [0.55] 25,4 [1.00] 5,84 [0.23] 25,4 [1.00] 4,06 [0.16] 62,28 [2.69] 76,40 [3.01] 14 sensing.honeywell.com 12,7 [0.50] conduit centerline O 14,73 [O 0.58] 12,7 [0.50] conduit centerline MICRO SWITCHTM Medium-Duty Limit Switches A300, Q300 A300, Q300 255 to 680 [9 to 24] 255 to 680 [9 to 24] 38,58 0,76 [1.519 0.030] 38,58 0,76 [1.519 0.030] 1,98 [0.078] 1,98 [0.078] 5,56 [0.219] 5,56 [0.219] 0,05 20 mm [0.002] 0,05 PG [0.002] 13,5 BZ, A300, SPDT Q300 255 to 680 [9 to 24] 38,58 0,76 [1.519 0.030] 1,98 [0.078] 5,56 [0.219] 0,05 [0.002] PG 11 BZE9-2RQN8-PG BZ, A300, SPDT Q300 3628 [128] max. 59,56 1,19 [2.345 0.047] 3,81 [0.150] 3,18 [0.125] 0,05 [0.002] PG 13,5 BZE9-2RN2-C BZ, A300, SPDT Q300 284 to 567 [10 to 20] 66,34 [2.612] Ref 4,78 [0.188] 5,56 [0.219] 0,20 20 mm [0.008] BZE9-2RN2-PG BZ, A300, SPDT Q300 284 to 567 [10 to 20] 66,34 [2.612] Ref 4,78 [0.188] 5,56 [0.219] 0,20 [0.008] PG 13,5 BZE9-2RN28-PG BZ, A300, SPDT Q300 227 to 256 [8 to 20] - 5,94 [0.234] 5,56 [0.219] 0,15 [0.006] PG 13,5 Inline Roller Plunger (see Figure 19) Roller Lever (see Figure 20) Comments Differential Travel max. mm [in] BZ, SPDT BZ, SPDT Conduit Thread Over Travel min. mm [in] BZE9-2RN-PG11 Pretravel max. mm [in] Pin Plunger (see Figure 18) Operate Point mm [in] BZE9-2RN-PG Operate Force g [oz] BZE9-2RN-C Electrical Rating [page 5] Catalog Listing Switch type, Circuitry Table 9. Order Guide * E9 Series Switches, Side Mount with Sealed Actuator and Two Conduits For catalog listings not shown, please contact your Honeywell distributor or representative. Roller plunger assembly can be positioned at 90 increments One-Way Roller Lever (see Figure 21) sensing.honeywell.com 15 E7 and V7 Series DIMENSIONS Figure 18. E9 Series, top pin plunger, side mount with boot seal 1,98 [0.078] pretravel Figure 19. E9 Series, inline roller plunger, side mount with seal 3,8 [0.15] pretravel O 8,38 [O 0.33] O 16,66 x 4,95 wide roller [O 0.656 x 0.195] Internal plunger seal 38,58 OP [1.519] 14 [0.55] (2) O 5,16 [O 0.203] mounting holes 31,2 [1.23] 59,56 OP [2.345] 76,0 [2.99] 84,6 [3.33] 12,7 [0.50] (2) conduit centerline (2) O 5,16 [O 0.203] mounting holes 14 [0.55] O 14,73 (2) [O 0.58] 4,3 [0.17] O 16,0 [O 0.63] 31,2 [1.23] O 14,73 (2) [O 0.58] 4,3 [0.17] 12,7 [0.50] (2) conduit centerline 76,0 [2.99] 84,6 [3.33] Figure 20. E9 Series, roller lever, side mount with boot seal Figure 21. E9 Series, one-way roller lever, side mount with boot seal O 19,05 x 7,11 wide roller [O 0.75 x 0.312] 39,88 [1.57] 18,29 [0.72] 23 [0.906] 225 180 48,11 [1.894] O 19,05 [0.75] x 7,92 [0.31] W roller 39,6 [1.56] 18,3 [0.72] 32,26 [1.27] 48,11 [1.894] 14 [0.55] (2) O 5,16 [O 0.203] mounting holes 14 [0.551] 31,2 [1.23] O 14,73 (2) [O 0.58] 4,3 [0.17] 76,0 [2.99] 84,6 [3.33] 12,7 [0.50] (2) conduit centerline 31,2 [1.23] O 14,73 (2) [O 0.58] 4,3 [0.17] 76,0 [2.99] 84,6 [3.33] 16 sensing.honeywell.com 12,7 [0.50] (2) conduit centerline MICRO SWITCHTM Medium-Duty Limit Switches Pretravel max. mm [in] Over Travel min. mm [in] Differential Travel max. mm [in] Conduit Thread 255 to 369 [9 to 13] 28,70 0,76 [1.30 0.030] 0,38 [0.015] 5,56 [0.219] 0,05 [0.002] PG 13,5 BZE9-2RQ8-C BZ, A300, SPDT Q300 255 to 369 [9 to 13] 44,53 1,19 [1.753 0.047] 0,38 [0.015] 3,56 [0.140] 0,05 20 mm [0.002] BZE9-2RQ8-PG BZ, A300, SPDT Q300 255 to 369 [9 to 13] 44,53 1,19 [1.753 0.047] 0,38 [0.015] 3,56 [0.140] 0,05 [0.002] PG 13,5 BZE9-2RQ81-PG BZ, A300, SPDT Q300 255 to 369 [9 to 13] 44,53 1,19 [1.753 0.047] 0,38 [0.015] 3,56 [0.140] 0,05 [0.002] PG 13,5 BZE9-2RQ2-PG BZ, A300, SPDT Q300 284 to 510 [10 to 18] 56,03 [2.206] Ref. 4,78 [0.188] 5,56 [0.219] 0,15 [0.006] PG 13,5 Comments Operate Point mm [in] BZ, A300, SPDT Q300 Electrical Rating [page 5] BZE9-2RQ-PG Catalog Listing Switch type, Circuitry Operate Force g [oz] Table 10. Order Guide * E9 Series Switches, Side Mount without Boot Sealed Actuator and Two Conduits For catalog listings not shown, please contact your Honeywell distributor or representative. Pin Plunger (see Figure 22) Inline Roller Plunger (see Figure 23) Cross Roller Plunger (see Figure 24) Roller Lever (see Figure 25) sensing.honeywell.com 17 E7 and V7 Series DIMENSIONS Figure 22. E9 Series, top pin plunger, side mount 0,38 [0.015] pretravel Figure 23. E9 Series, inline roller plunger, side mount 0,4 [0.015] pretravel O 8,38 [O 0.33] 33,02 OP [1.30] 13,97 [0.55] (2) O 5,16 [O 0.203] mounting holes 31,2 [1.23] O 14,73 (2) [O 0.58] 4,3 [0.17] 76,0 [2.99] 84,6 [3.33] 0,4 [0.015] pretravel 44,5 OP [1.75] 31,2 [1.23] O 14,73 (2) [O 0.58] 4,3 [0.17] 76,0 [2.99] 84,6 [3.33] 39,6 [1.56] 225 O 19,0 [0.75] x 7,9 [0.312] W roller 18,3 [0.72] 23,1 [0.91] (2) O 5,16 [O 0.203] mounting holes 14 [0.55] 37,8 [1.49] 31,2 [1.23] O 14,73 (2) [O 0.58] 4,3 [0.17] 76,0 [2.99] 84,6 [3.33] 12,7 [0.50] (2) conduit centerline (2) O 5,16 [O 0.203] mounting holes 14 [0.55] 31,2 [1.23] O 14,73 (2) [O 0.58] 4,3 [0.17] 76,0 [2.99] 84,6 [3.33] 18 sensing.honeywell.com 12,7 [0.50] (2) conduit centerline Figure 25. E9 Series, roller lever, side mount O 12,7 x 4,57 [O 0.50 x 0.18] wide roller 44,53 OP [1.75] (2) O 5,16 [O 0.203] mounting holes 14 [0.55] 12,7 [0.50] (2) conduit centerline Figure 24. E9 Series, cross roller lever, side mount O 12,7 x 4,5 wide roller [O 0.50 x 0.18] 12,7 [0.50] (2) conduit centerline MICRO SWITCHTM Medium-Duty Limit Switches Pretravel max. mm [in] Over Travel min. mm [in] Differential Travel max. mm [in] 255 to 680 [9 to 24] 69,85 1,57 [2.75 0.062] 1,98 [0.078] 5,56 [0.219] 0,05 20 mm [0.002] BZV7-2RN-PG BZ, A300, SPDT Q300 255 to 680 [9 to 24] 69,85 1,57 [2.75 0.062] 1,98 [0.078] 5,56 [0.219] 0,05 [0.002] Pin Plunger (see Figure 26) BZV7-2RN2-C BZ, A300, SPDT Q300 284 to 567 [10 to 20] 97,59 [3.842] Ref. 4,78 [0.188] 5,56 [0.219] 0,20 20 mm [0.008] Roller Lever (see Figure 27) BZV7-2RN2-PG BZ, A300, SPDT Q300 284 to 567 [10 to 20] 97,59 [3.842] Ref. 4,78 [0.188] 5,56 [0.219] 0,20 [0.008] Comments Conduit Thread Operate Point mm [in] BZ, A300, SPDT Q300 Electrical Rating [page 5] BZV7-2RN-C Catalog Listing Switch type, Circuitry Operate Force g [oz] Table 11. Order Guide * V7 Series Switches, Flange Mount with Boot Sealed Actuator For catalog listings not shown, please contact your Honeywell distributor or representative. PG 13,5 PG 13,5 DIMENSIONS Figure 26. V7 Series, top pin plunger, flange mount with boot seal 1,93 [0.076] pretravel Figure 27. V7 Series, roller lever, flange mount with booth seal 39,88 [1.57] O 8,38 [O 0.33] 18,29 [0.72] 24,38 [0.91] 225 69,85 OP [2.75] 45,21 [1.78] 10,59 [0.42] 3,18 [0.125] base 34,01[1.34] 76,4 [3,01] O 14,73 [O 0.58] 12,7 [0.50] conduit centerline (2) O 5,16 [O 0.203] mounting holes O 19,05 x 7,92 wide roller [O 0.75 x 0.312] 48,11 [1.894] 13,97 [0.55] 25,4 5,84 [1.00] [0.23] 3,18 [0.125] base 10,59 [0.42] 4,06 [0.16] 34,01[1.34] 76,40 [3,01] O 14,73 [O 0.58] 12,7 [0.50] conduit centerline (2) O 5,16 [O 0.203] mounting holes sensing.honeywell.com 19 E7 and V7 Series Pretravel max. mm [in] Over Travel min. mm [in] Differential Travel max. mm [in] Conduit Thread 255 to 369 [9 to 13] 63,5 1,19 [2.50 0.047] 0,38 [0.015] 5,56 [0.219] 0,05 [0.002] PG 13,5 BZV7-2RQ8-C BZ, A300, SDPT Q300 255 to 369 [9 to 13] 75,01 1,52 [2.953 0.060] 0,38 [0.015] 3,56 [0.140] 0,05 20 mm [0.002] BZV7-2RQ8-PG BZ, A300, SDPT Q300 255 to 369 [9 to 13] 75,01 1,52 [2.953 0.060] 0,38 [0.015] 3,56 [0.140] 0,05 [0.002] BZV7-2RQ81-C BZ, A300, SPDT Q300 255 to 369 [9 to 13] 75,01 1,52 [2.953 0.060] 0,38 [0.015] 3,56 [0.140] 0,05 20 mm [0.002] BZV7-2RQ81-PG BZ, A300, SPDT Q300 255 to 369 [9 to 13] 75,01 1,52 [2.953 0.060] 0,38 [0.015] 3,56 [0.140] 0,05 [0.002] BZV7-2RQ2-C BZ, A300, SPDT Q300 284 to 510 [10 to 18] 87,27 [3.436] Ref. 4,78 [0.188] 5,56 [0.219] 0,15 20 mm [0.006] BZV7-2RQ2-PG BZ, A300, SPDT Q300 284 to 510 [10 to 18] 87,27 [3.436] Ref. 4,78 [0.188] 5,56 [0.219] 0,15 [0.006] Pin Plunger (see Figure 28) Inline Roller Plunger (see Figure 29) Cross Roller Plunger (see Figure 30) Roller Lever (see Figure 31) 20 sensing.honeywell.com PG 13,5 PG 13,5 PG 13,5 Comments Operate Point mm [in] BZ, A300, SPDT Q300 Electrical Rating [page 5] BZV7-2RQ-PG Catalog Listing Switch type, Circuitry Operate Force g [oz] Table 12. Order Guide * V7 Series Switches, Flange Mount without Boot Sealed Actuator For catalog listings not shown, please contact your Honeywell distributor or representative. MICRO SWITCHTM Medium-Duty Limit Switches DIMENSIONS Figure 28. V7 Series, top pin plunger, flange mount 0,38 [0.015] pretravel 0,4 [0.015] pretravel O 8,38 [O 0.33] 5,84 [0.23] 3,18 [0.125] base O 12,7 x 4,5 wide roller [O 0.50 x 0.18] 44,5 OP [1.75] 33,02 OP [1.30] 13,97 [0.55] 25,4 [1.00] Figure 29. V7 Series, inline roller plunger, flange mount 13,97 [0.55] 10,59 [0.42] 4,06 [0.16] 34,01[1.34] 76,40 [3,01] O 14,73 [O 0.58] 25,4 [1.00] 12,7 [0.50] conduit centerline (2) O 5,16 [O 0.203] mounting holes Figure 30. V7 Series, cross roller plunger, flange mount 5,84 [0.23] 3,18 [0.125] base O 14,73 [O 0.58] 12,7 [0.50] conduit centerline (2) O 5,16 [O 0.203] mounting holes 4,06 [0.16] 34,01[1.34] 76,40 [3,01] Figure 31. V7 Series, roller lever, flange mount O 12,7 x 4,57 [O 0.50 x 0.18] wide roller 0,38 [0.015] pretravel 10,59 [0.42] O 19,0 [0.75] x 7,9 [0.312] W roller 39,6 [1.57] 44,53 OP [1.75] 225 18,3 [0.72] 23,1 [0.91] 13,97 [0.55] 25,4 5,84 [1.00] [0.23] 3,18 [0.125] base 10,59 [0.42] 4,06 [0.16] 34,01[1.34] 76,40 [3,01] O 14,73 [O 0.58] 12,7 [0.50] conduit centerline (2) O 5,16 [O 0.203] mounting holes 37,8 [1.49] 13,97 [0.55] 25,4 5,84 [1.00] [0.23] 3,18 [0.125] base 10,59 [0.42] 4,06 [0.16] 34,01[1.34] 76,40 [3,01] O 14,73 [O 0.58] 12,7 [0.50] conduit centerline (2) O 5,16 [O 0.203] mounting holes sensing.honeywell.com 21 E7 and V7 Series This Honeywell datasheet supports the following MICRO SWITCHTM E7/V7 Series Limit Switch Listings BZE7-2RN2-PG BZE7-2RN-PG BZE7-2RQ8-PG BZE7-2RQ81C BZE7-2RN18-PG BZE7-2RQN8-C BZE7-2RQ-PG BZE7S-2RN-PG BZE9-2RQ-PG BZE7-2RN18-C BZE7-2RN18-CN14 BZE7-2RN2-6NC BZE7-2RN28-C BZE7-2RN28-PG BZE7-2RN2-C BZE7-2RN2-CN6 BZE72RNC BZE7-2RN-C BZE7-2RN-CN5 BZE7-2RN-D BZE72RNPG 22 sensing.honeywell.com BZE7-2RQ2-C BZE72RQ2PG BZE7-2RQ2-PG BZE7-2RQ81-C BZE7-2RQ81-PG BZE7-2RQ8-C BZE7-2RQ9-C BZE7-2RQ9-PG BZE7-2RQ-C BZE72RQN8C BZE7-2RQN8-PG BZE7S-2RN BZE7S-2RN28-C BZE7S-2RN2-C BZE7S-2RN2-PG BZE7S-2RN-C BZE7S-2RQ2-C BZE7S-2RQ81-C BZE7S-2RQ8-C BZE7S-2RQ8-PG BZE7S-2RQ9-C BZE7S-2RQ-C BZE7S-2RQN8-C BZE7S-2RQ-PG BZE9-2RN28-PG BZE9-2RN2-C BZE9-2RN2-PG BZE9-2RN-C BZE9-2RN-PG BZE9-2RN-PG11 BZE9-2RQ2-PG BZE9-2RQ81-PG BZE9-2RQ8-C BZE9-2RQ8-PG BZE9-2RQN8-PG BZV7-2RN2-C BZV7-2RN2-PG BZV7-2RN-C BZV7-2RN-PG BZV7-2RQ2-C BZV7-2RQ2-PG BZV7-2RQ81-C BZV7-2RQ81-PG BZV7-2RQ8-C BZV7-2RQ8-PG BZV7-2RQ-PG DTE7-2RN28-C DTE7-2RN2-C DTE72RN2PG DTE7-2RN2-PG DTE7-2RN-C DTE72RNPG DTE7-2RN-PG DTE7-2RQN8-C DTE7-2RQN8PC DTE72RQN8PG DTE7-2RQN8-PG DTE7S-2RN2-C DTE7S-2RN-C DTE7S-2RQ9-C DTE7S-2RQ9-PG DTE7S-2RQN8-C MICRO SWITCHTM Medium-Duty Limit Switches ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product installation instructions * Product range guide * Product nomenclature tree * Product application-specific information WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. - Limit and enclosed switch reference standards WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. sensing.honeywell.com 23 Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 002393-1-EN IL50 GLO March 2015 Copyright (c) 2015 Honeywell International Inc. All rights reserved.