IRL80A - OSRAM Opto Semiconductors

IRL 80 A

GaAs-Infrarot-Sendediode

GaAs Infrared Emitter

Lead (Pb) Free Product - RoHS Compliant

2007-08-06 1

Wesentliche Merkmale

• GaAs-Lumineszenzdiode im Infrarotbereich

• Klares Miniaturkunststoffg ehäu se, seitliche

Abstrahlung

• Preiswertes Kunststoffgehäuse

• Lange Lebensdauer (Langzeitstabilität)

• Weiter Öffnungskegel (± 30°)

• Passend zu Fototransistor LPT 80 A

Anwendungen

• Fertigungs- und Kontrollanwendungen der

Industrie, die eine Unterbrechung des

Lichtstrahls erfordern

• Lichtschranken

Typ

Type Bestellnummer

Ordering Code

IRL 80 A Q68000A7851

Features

• GaAs infrared emitting diode

• Clear plastic package with late ral emis sion

• Low cost plastic package

• Long term stability

• Wide beam (± 30°)

• Matches phototransistor LPT 80 A

Applications

• For a variety of manufacturing and monitoring

applications which require beam interruption

• Light barriers

2007-08-06 2

IRL 80 A

Grenzwerte (TA = 25 °C

Maximum Ratings

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

Betriebs- und Lagertemperatur

Operating and storage temperature range Top; Tstg – 40 … + 100 °C

Sperrspannung

Reverse voltage VR3 V

Durchlassstrom

Forward current IF60 mA

Verlustleistung

Power dissipation Ptot 100 mW

Verringerung der Verlustleistung, TA > 25 °C

Derate above, TA > 25 °C–1.33 mW/°C

Wärmewiderstand

Thermal resistance RthJA 750 K/W

Kennwerte (TA = 25 °C)

Characteristics

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

Wellenlänge der Strahlung bei Imax

Wavelength of peak emission λpeak 950 nm

Spektrale Bandbreite bei 50% von Imax

Spectral bandwidth at 50% of Imax

Δλ ± 20 nm

Abstrahlwinkel

Half angle ϕ ± 30 Grad

deg.

Durchlassspannung, IF = 20 mA

Forward voltage VF≤ 1.5 V

Strahlstärke1), IF = 20 mA

Radiant intensity

1) Ein Silizium-Empfänger mit 1 cm2 strahlungsempfindlicher Fläche wird nach der mecha nischen Achse ausgerichtet.

Es wird eine Lochblende v erwendet.

1) A 1 cm2 silicon detector is aligned with the mechanical axis. An aperture is used.

Ie≥ 0.4 mW/sr

IRL 80 A

2007-08-06 3

Relative Spectral Emission

Srel = f (λ)Directional Characteristics

Irel = f (ϕ)

2007-08-06 4

IRL 80 A

Maßzeichnung

Package Outlines

Maße in mm (inch) / Dimensions in mm (inch).

Approx weight 0.2g

Empfohlenes Lötpaddesign Wellenlöten (TTW)

Recommended Solder Pad TTW Soldering

Maße in mm (inch) / Dimensions in mm (inch).

4 (0.157)

OHLPY985

4.8 (0.189)

IRL 80 A

2007-08-06 5

Wellenlöten (TTW) (nach CECC 00802)

TTW Soldering (acc. to CECC 00802)

Published by

OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

www.osram-os.com

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components 1 , may only be used in life-support dev ices or systems 2 with the expres s written approval of OSRAM OS.

1 A critical componen t is a component usedin a life-support device or syste m whose failure can reasonably be expected

to cause the failure of that life-support devic e or system, or to a ffect its safety or e ffectiveness of that device or system.

2 Life support devices or syste ms are intended (a) to be implanted in the human body, o r (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be en dangered.

OHLY0598

050 100 150 200 250

100

150

200

250

300

235 C

10 s

C... 260

1. Welle

1. wave

2. Welle

2. wave

5 K/s 2 K/s

ca 200 K/s

CC... 130100

2 K/s Zwangskühlung

forced cooling

Normalkurve

standard curve

Grenzkurven

limit curves