SPEC NO: DSAM8418 REV NO: V.1 DATE: JAN/23/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1301001453
9.9mm (0.39INCH) SINGLE DIGIT NU MERIC
DISPLAY
Part Number: SA39-12SYKWA
Super Bright Yellow
Description
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
Features
z0.39 inch digit height.
zLow current operation.
zExcellent character appearance.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
SPEC NO: DSAM8418 REV NO: V.1 DATE: JAN/23/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1301001453
Selection Guide
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Yellow 590 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA
C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA
IR Reverse Current Super Bright Yellow 10 uA VR=5V
Parameter Super Bright Yellow Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 175 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
SA39-12SYKWA Super Bright Yellow (AlGaInP) White Diffused
31000 86000
*14000 *26000
Common Anode,
Rt. Hand Decimal.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAM8418 REV NO: V.1 DATE: JAN/23/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1301001453
Super Bright Yellow SA39-12SYKWA
SPEC NO: DSAM8418 REV NO: V.1 DATE: JAN/23/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1301001453
PACKING & LABEL SPECIFICATIONS SA39-12SYKWA
SPEC NO: DSAM8418 REV NO: V.1 DATE: JAN/23/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1301001453
SPEC NO: DSAM8418 REV NO: V.1 DATE: JAN/23/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1301001453
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
