CONTACTS
Arrangement DPST-N.O.
DPDT
Ratings Resistive load:
Max. switched power: 560 W or 8310 VA
Max. switched current:30 A N.O, 3 A N.C.
Max. switched voltage: 600 VAC or 30 VDC*
UL, CUR 30 A at 277 VAC General Use, 100k cycles
N.O. 1 Hp at 120 VAC, 100k cycles
2.5 Hp at 240 VAC, 100k cycles
110 LRA/25.3 FLA at 240 VAC (DC coils only),
30k cycles
UL, CUR 3 A at 277 VAC General Use, 100k cycles
N.C.
VDE N.O. 20A 250VAC, N.C. 3A 250VAC
*Note: If switching voltage is greater than 30VDC,
special precautions must be taken. Please contact
the factory.
Material Silver cadmium oxide, silver tin oxide
Resistance <50 milliohms initially
(6 V, 1 A voltage drop method)
AZ2800
3/3/08W
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 5 x 107
Electrical 1 x 105at 30 A 120 VAC Res. N.O.
Operate Time 15 ms typical
25 ms maximum with bounce
Release Time 10 ms typical
25 ms maximum with bounce
(with no coil suppression)
Dielectric Strength 1500 Vrms contact to contact
(at sea level for 1 min.) 4000 Vrms contact to coil
2000 Vrms between contact sets
Insulation Resistance 109ohms minimum at 500 VDC
Dropout DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating DC: -40°C (-40°F) to 95°C (203°F)
AC: -40°C (-40°F) to 75°C (167°F)
Storage -40°C (-40°F) to 155°C (311°F)
Vibration 0.062" DA at 10–55 Hz
Shock Operational, 10 g for 11 ms 1/2sine pulse
(no contact opening > 100usec)
Non-destructive, 100 g for 11 ms 1/2sine pulse
Enclosure P.B.T. polyester
Terminals Quick connect tabs
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 86 grams
COIL
Power
At Pickup Voltage DC: 0.925 W
(typical) AC: 2.6 VA
Max. Continuous DC: 5.0 W at 20°C (68°F)
Dissipation AC: 7.0 VA at 20°C (68°F)
Temperature Rise DC: 48°C (86°F) at nominal coil voltage
AC: 68° C (122°F) at nominal coil voltage
Temperature Max. 155°C (311°F)
30 AMP MINIATURE
POWER RELAY
FEATURES
•30 Amp switching capability
•DPST-NO and DPDT configuration
•Meets 8 mm creepage, 4 kV dielectric
•Meets Class F construction
•Epoxy sealed versions available
•UL, CUR file E44211, VDE 40023442
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
COIL SPECIFICATIONS – AC Coil 60 Hz [1]
Nominal Coil Must Operate Max. Continuous Nominal Current Coil Resistance ORDER NUMBER*
VAC VAC VAC mA ± 10% ± 10%
12 9.6 15.6 325 9.5 AZ2800–2C–12A
24 19.2 31.2 154 35.7 AZ2800–2C–24A
120 96.0 156.0 33.5 830 AZ2800–2C–120A
208 166.4 270.4 19.3 2600 AZ2800–2C–208A
220 176.0 286 18.1 2870 AZ2800–2C–220A
240 192.0 312.0 17.3 3800 AZ2800–2C–240A
277 221.6 360.1 14.5 4700 AZ2800–2C–277A
*Add suffix “E” for epoxy sealed version. Add suffix “K” for 0.187x.020 or “J” for 0.187x.032 QC coil terminals. Substitute '2A” for “2C” to indicate
DPST (N.O.) contacts. Add suffix “E” to “2A” or “2C” to indicate AgSNO2contacts.
[1] For 50 Hz coil replace “A” with “A5” (example: “A2280-2C-24A5”).
AZ2800
3/3/08W
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Nominal Coil Must Operate Max. Continuous Coil Resistance ORDER NUMBER*
VDC VDC VDC ± 10%
6 4.5 10.5 22 AZ2800–2C–6D
12 9.0 20.7 86 AZ2800–2C–12D
24 18.0 41.8 350 AZ2800–2C–24D
48 36.0 83.4 1390 AZ2800–2C–48D
110 82.5 190.5 7255 AZ2800–2C–110D
MECHANICAL DATA
.58
0
1
34
78
2
6
0
4
8
2
6
2 FORM C
1
VIEWED TOWARD TERMINALS
2 FORM A
1.36
[34.5]
1.04
[26.4]
[8.0]
2.35
8 x.032
[.81]
2.69
[68.4]
[41.1]
[59.7]
WIRING DIAGRAM
[14.8]
.31
1.62
[3.8]
.15
.63
[16.0]
8 x.45
[11.4]
2 x DIM "A"
DIM. "A" = .250 [6.35] x .032 [.81] THK - STANDARD
DIM. "A" = .187 [4.75] x .020 [.51] THK - "K" SUFFIX
[3.3]
.13
[4.6]
.18
[6.35]
6 x.250
[25.4]
1.00
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
