www.panduit.com
Standards requirements:
TIA/EIA-604 FOCIS-10 compatible; exceeds
TIA/EIA-568-B.3 requirements
Fiber compatibility:
62.5 /125 µm OM1, 50/125µm OM2,
10G
IG
™50/125µm
laser optimized OM3
Fiber cable type:
900µm tight-buffered cable only
Fiber cable size:
1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots
Ferrule type:
Zirconia ceramic with a pre-polished fiber stub
Insertion loss:
Ceramic: .3dB average (multimode)
Return loss:
Ceramic: >20dB (multimode), >26dB (
10G
IG
™multimode)
key features and benefits
applications
technical information
specifications
LC OPTICAM
™
Connectors
Factory pre-polished fiber
Eliminates inconsistent and time-consuming field polishing to deliver
stub endface
required optical performance; reduces termination time (less than
half the time of field polish connectors) and the number of
installation tools required
Dual cam design with
Secures both the fiber and the buffer dur ing the camming step to
fiber and buffer clamps
facilitate consistent termination results; reduces the termination time
compared to conventional termination methods
Allows up to two re-terminations to achieve optimum ter mination
results; reduces the number of rejected connectors and ter minations
to provide yield rates approaching 100% for lower installed costs
Translucent
Facilitates inspection of the fiber ter mination quality; results in rapid
housing assembly
installations, improved termination yields, and lower installed costs
Non-optical disconnect
Maintains data transmission under tensile loads for jacketed cable
Mechanical cable retention
Consistently provides higher than industry standard cable retention;
requires no adhesive, speeding installation
O
PTI
C
AM
™
T ermination T ool
Universal termination tool
Secures both fiber and buffer in one action for
O
PTI
C
AM
™Connectors
with connector specific cradles; ensures fast, consistent, and
optimal terminations
Integrated visual fault
Offers visual indication of proper termination after the cam step
locator (VFL)
has been completed; virtually eliminates operator error to deliver a
lower installed cost
LC fiber optic connectors are widely used in fiber
optic backbone and horizontal applications for
high-speed data transmission.Typical applications
for LC
O
PTI
C
AM
™Connectors include
maintenance or emergency restoration of fiber
networks and retrofit/initial install in both
behind-the-wall (BTW) and in the permanent side
of panelized interconnect and cross-connect.
LC
O
PTI
C
AM
™Connectors eliminate the need for
end face polishing and adhesive providing easier,
faster installation, especially in remote areas and
confined spaces.The OCTT hand-held tool gives
installers the flexibility to terminate in ver y close
proximity to the application without having to
switch tools or find benchtop space.
LC O
PTI
C
AM
™
Pre-P olished
Multimode Connectors
10G
IG
™
50/125µm (laser
optimized) simplex:
FLCSMCXAQ
10G
IG
™
50/125µm (laser
optimized) duplex:
FLCDMCXAQ
50/125µm simplex:
FLCSMC5BL
50/125µm duplex:
FLCDMC5BL
62.5/125µm simplex:
FLCSMC6BL
62.5/125µm duplex:
FLCDMC6BL
O
PTI
C
AM
™
1.6/2.0mm Boots
10G
IG
™
multimode (aqua):
FMCBT2AQ-X*
Multimode (black):
FMCBT2BL-X
O
PTI
C
AM
™
3.0mm Boots
10G
IG
™
multimode (aqua):
FMCBT3AQ-X*
Multimode (black):
FMCBT3BL-X
*X = Bag of 10 Boots; 100 per carton.
O
PTI
C
AM
™
Termination Tooling
Pre-polished termination
kit – includes OCTT Tool
(terminates O
PTI
C
AM
™
and
O
PTI
-C
RIMP
®
Connectors):
FPPKIT
Pre-polished conversion
kit – includes OCTT Tool
(upgrades O
PTI
-C
RIMP
®
Kit to also terminate
O
PTI
C
AM
™
Connectors):
FPPKIT-CV
LC cradle (2 per pkg.):
FLCC
LC Fiber Optic Adapters
10G
IG
™
multimode:
FADJLCAQ-L
Multimode:
FADJLCEI-L
*L = Bag of 50 adapters; 100 per carton.
M
INI
-C
OM
®
LC Adapter Modules
10G
IG
™
multimode:
CMDJAQLC**
Multimode:
CMDJEILC**
**Substitute for module color: EI = Electric Ivory,
BU = Blue, BL = Black, IW = Off White,
AW = Arctic White
O
PTI
C
OM
®
LC Fiber Adapter Panels
6 duplex MM adapters:
FAP6WEIDLC
12 duplex MM adapters:
FAP12WEIDLC
O
PTI
-C
ORE
®
LC Patch Cords
Duplex LC to LC
F^E10-10M‡
Simplex LC to LC:
F^F10-10M‡
Duplex LC to SC:
F^E10-3M‡
Simplex LC to SC:
F^F10-3M‡
^Substitute for fiber type:6 = 62.5/125µm OM1,
5 = 50/125µm OM2, X =
10G
IG
™50/125µm OM3 or
9 = 9/125µm OS1.
‡Substitute for length in meters:1, 2, 3, 5 or 10.
Contact Customer Service for other
available lengths.
®
SPECIFICATION SHEET
LC OPTICAM
™
Pre-Polished
Fiber Optic Connectors
LC small form factor (SFF) pre-polished connectors with rear
pivot latch are TIA/EIA-604 FOCIS-10 compatible and contain a
factor y-terminated fiber, eliminating field polishing and adhesive.
LC pre-polished connectors have an average inser tion loss of
.3dB per mated pair for multimode fiber. LC pre-polished
connectors captivate fiber and buffer in one action allowing for
up to two re-terminations with no degradation in performance.
performance information
©2005
PANDUIT
Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
WW-FBSP19
12/2005
OPTICAM
™
Termination Tool
***Substitute for fiber type: XAQ for
10G
IG
™50/125µm, 5BL for 50/125µm, 6BL for 62.5/125µm
Dimensions are in inches [Dimensions in brackets are in millimeters]
LC OPTICAM
™
Pre-Polished Fiber Optic Connectors
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a copy of
PANDUIT
product warranties, log on to www.panduit.com/warranty
PANDUIT
CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT
EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT
JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.3767.7011
PANDUIT
SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6379.6700
PANDUIT
AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
PANDUIT
LATIN AMERICA
Jalisco, Mexico
cs-la@panduit.com
Phone: 52.333.666.2501
Contact Customer Service by email: cs@panduit.com
or by phone: 800-777-3300 and reference FBSP19
Visit us at www.panduit.com
For more information
OCTT
LC OPTICAM
™
Pre-Polished
Duplex Connector
LC OPTICAM
™
Pre-Polished
Simplex Connector
FLCDMC***FLCSMC***
Test Parameter Description Result
Qualification test suite
(TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3
using TIA/EIA FOTPs that include mechanical,
environmental, and optical test sequences
Exceeds TIA/EIA-568-B.3 requirements
Connector intermatability Dimensional and material compliance to
TIA/EIA standards All connectors are FOCIS compatible with
TIA/EIA-604-10
Repeated mating 500 mate/unmate cycles
Max. inser tion loss: .75dB
Min. return loss: 20dB
Exceeds TIA/EIA-568-B.3 test requirements:
< .1dB additional inser tion loss
Fiber tensile load (straight pull) TIA/EIA-568-B.3 requirement; minimum load of
.5 lb. applied without change in insertion loss for
900µm tight-buffered fiber
Exceeds TIA/EIA-568-B.3 requirements for
900µm tight-buffered fiber:
>1.0 lb. with < .05 additional insertion loss
selection information
Part Number
FLCSMCXAQ
FLCDMCXAQ
FLCSMC5BL
FLCDMC5BL
FLCDMC6BL
Zirconia
Ceramic
Zirconia
Ceramic
Zirconia
Ceramic
SPC
SPC
SPC
Aqua Aqua
Black
Black
Black
Electric
Ivory
.3dB
.3dB
.3dB
>26dB
>20dB
>20dB
FLCSMC6BL
Simplex
10G
IG
™50/125µm
(laser optimized) OM3
50/125µm OM2
62.5/125µm OM1
Duplex
Simplex
Duplex
Duplex
Simplex
*All connector inser tion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171.
Connector
Type FerruleFiber Ferrule
Finish Backbone
Color Boot
Color Average
Insertion Loss* Return
Loss
2.23
[56.6] 2.23
[56.6]
.25
[6.35]
