A+ Products Motherboards [ H8DGU-LN4F+ ]
Key Features
1. Dual AMD Opteron™ 6000 series
processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link
support
2. AMD SR5690 / SP5100 Chipset
3. Up to 768GB DDR3 1600MHz ECC
Registered DIMM; 24x DIMM sockets
4. Expansion slot:
1U Left Slot:
1 PCI-E 2.0 x16 and UIO or
2 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 or
1 PCI-E 2.0 x8 and UIO
2U Left Slot:
2 PCI-E 2.0 x8 and UIO or
3 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 and UIO
2U Right Slot:
3 PCI-E 2.0 (x4 + x1 + x1)
(via RSC-R2UU-2E2E4R Riser Card)
(See Optional Part List)
5. 6x SATA (3.0 Gb/s) ports + 2x Intel
82576 dual-port GbE (4x LAN ports)
6. Integrated IPMI 2.0 + KVM with
dedicated LAN
7. Integrated Matrox G200eW Graphics
8. 7x USB 2.0 ports (2x rear / 2x internal
header (4 ports) / 1x Type-A)
Links & Resources
Tested Memory List
Tested HDD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest
Drivers and Utilities
Download Driver CD
Product SKUs
MBD-H8DGU-
LN4F+ H8DGU-LN4F+ (Bulk Pack)
Physical Stats
Form Factor Proprietary
Dimensions 12.8" x 16.5" (32.51cm x 41.91cm)
Processor/Chipset
CPU
Dual 1944-pin Socket G34
Supports up to two 16/12/8/4-Core ready
AMD Opteron™ 6000 Series
processors
HT3.0 Link support
Chipset AMD chipset SR5690 / SP5100
System Memory
Memory
Capacity
24 DIMM sockets
Supports up to 768GB Registered ECC or
128GB Unbuffered ECC/non-ECC DDR3
1600/1333/1066 SDRAM in 24 DIMMs
Quad channel memory bus
For Dual CPUs: Recommended that memory
be populated equally in adjacent memory
banks
See Detailed Memory Support Matrix
Memory
Type
DDR3 1600/1333/1066 MHz Registered ECC
or Unbuffered ECC/non-ECC SDRAM 72-bit,
240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory
Voltage 1.35V or 1.5V
Error
Detection
Corrects single-bit errors
Detects double-bit errors (using ECC
memory)
On-Board Devices
Chassis ( Optimized for H8DGU-LN4F+ )
1U Chassis CSE-119TQ-R700UB
Requires air shroud MCP-310-19003-0N*
2U Chassis CSE-829TQ-R920UB
Note
* Sold separately, please refer to the
chassis web spec for the air shroud info in
the optional part list.
Server(s) ( with H8DGU-LN4F+ )
Model(s) AS -1122G-URF4+
AS -2022G-URF4+
System BIOS
BIOS Type 16Mb Flash EEPROM with AMI® BIOS
BIOS
Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
BIOS Rescue Hot Keys
USB Keyboard Support
Hardware BIOS Virus Protection
SMBIOS 2.3
Management
Software
IPMI (Intelligent Platform Management
Interface) 2.0
Super Doctor III
Watch Dog
Power
Configurations
ACPI Power Management
Power-on mode control for AC power
loss recovery
PC Health Monitoring
CPU
Monitors CPU Core Voltages, +3.3V, +5V,
±12V, HyperTransport Link voltage,
memory voltage, VBAT, Chipset voltage
CPU switching voltage regulator
H8DGU-LN4F+
English
SATA AMD SP5100 (RAID 0, 1, 10)
IPMI
Support for Intelligent Platform Management
Interface v.2.0
IPMI 2.0 with virtual media over LAN and
KVM over LAN support
Winbond® WPCM450 BMC
Network
Controllers
2x Intel® 82576 controller, Dual-Port
Gigabit Ethernet
10/100/1000BASE-T support
VGA Matrox G200eW 16MB DDR2
Super I/O Winbond 83527HG chip
Input / Output
SATA 6x SATA (3Gb/s) Ports
LAN 4 RJ45 LAN ports
1x RJ45 Dedicated LAN supports IPMI
USB 7x USB 2.0 ports
2x Rear, 2x header(4 ports), 1x Type A
VGA 2x VGA port
Keyboard /
Mouse PS/2 keyboard and mouse ports
Serial Ports 1 Fast UART 16550 serial port
1 serial port header
Others 1UID, 1 SATA DOM power connector, TPM
header
Expansion Slots
PCI-Express
(Gen 2.0)
1U Left Slot:
1 PCI-E 2.0 x16 and UIO or
2 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 or
1 PCI-E 2.0 x8 and UIO
2U Left Slot:
2 PCI-E 2.0 x8 and UIO or
3 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 and UIO
2U Right Slot:
3 PCI-E 2.0 (x4 + x1 + x1)
(via RSC-R2UU-2E2E4R Riser Card)
(See Optional Part List)
FAN
Total up to 8-fan status tachometer
monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature
Monitoring for CPU and chassis
environment
CPU Thermal Trip Support
Thermal Control for 8x Fan Connectors
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
Suspend-State Indicator LED
+5V Standby Alert LED
UID/Remote LED
Other
Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment / Compliance
RoHS
RoHS Compliant 6/6, Pb Free
Environmental
Specifications
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
OS Compatibility
• Please see our OS Compatibility Chart
Regulatory
FCC Passed to meet FCC standard requirement
Bulk Pack List
Part Number Qty Description
Motherboard MBD-H8DGU-LN4F+ 1H8DGU-LN4F+ Motherboard
Retention BKT-0035L 2AMD SOCKET G34 CPU HS RETENTION MODULE
I/O Cable 1 CBL-0044L 257.5CM SATA FLAT S-S PBF
Optional Parts List
Part Number Qty Description
1U Riser Cards
RSC-R1UU-2E8
RSC-R1UU-E16
RSC-R1UU-UAX
RSC-R1UU-UE8
RSC-R1UU-UE16
-
-
-
-
-
2 PCI-E (x8) Slot - Left Side
1 PCI-E (x16) Slot - Left Side
1 Universal I/O (UIO) Slot + PCI-X 133MHz Slot - Left Side
1 Universal I/O (UIO) Slot + 1 PCI-E (x8) - Left Side
1 Universal I/O (UIO) Slot + 1 PCI-E (x16) - Left Side
2U Riser Cards
RSC-R2UU-UAX
RSC-R2UU-UA3E8+
RSC-R2UU-A4E8+
RSC-R2UU-3E8G
RSC-R2UU-2E2E4R
-
-
-
-
-
1 UIO Slot + 1 133MHz, 2 133/100MHz PCI-X Slots - Left Side
1 UIO and 3 PCI-E x8 slots
4 PCI-E x8 slots
3 PCI-E x8 (in x16) slots ?Left Side
1PCI-E x4 slot + 2PCI-E x2 (in x4) slots - Right Side
* Please refer to our Riser card matrix
Terms & Conditions | Privacy | Jobs Copyright © 2016 Super Micro Computer, Inc.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed: Monday, November 28, 2016: @22:38:26
