Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type: B43704, B43724 Date: December 2016 (c) EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Capacitors with screw terminals B43704, B43724 High ripple current 85 C Long-life grade capacitors Applications Frequency converters Wind power converters Solar inverters Professional power supplies Uninterruptible power supplies Features High CV product, i.e. very compact High reliability and high ripple current capability All-welded construction ensures reliable electrical contact PAPR terminals available (Protection Against Polarity Reversal) Version available with an optimized base cooling design (heat sink mounting) and featuring up to 2 times the ripple current capability RoHS-compatible Construction Charge-discharge proof, polar Aluminum case, insulated with PVC sleeve Version with PET insulation available upon request Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud Types with threaded stud are available with or without insulated base Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 23 B43704 B43724 B43704, B43724 High ripple current 85 C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 350 ... 550 V DC 1.10 VR 820 ... 22000 F 20% M Dissipation factor tan (20 C, 120 Hz) 0.20 Leakage current Ileak (20 C, 5 min) Self-inductance ESL d = 51.6 mm: approx. 15 nH d 64.3 mm: approx. 20 nH Useful life1) 85 C; VR; IAC,R 350 ... 500 V 550 V > 12000 h > 8000 h IEC climatic category To IEC 60068-1: 40/085/56 (40 C/+85 C/56 days damp heat test) Detail specification Sectional specification Similar to CECC 30301-803, CECC 30301-807 IEC 60384-4 Requirements: C/C 15% of initial value tan 1.75 times initial specified limit Ileak initial specified limit Voltage endurance test Post test requirements: 85 C; VR 2000 h C/C 10% of initial value tan 1.3 times initial specified limit Ileak initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.75 mm, acceleration max. 10 g, duration 3 x 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance Characteristics at low VR 350 V 400 V ratio at 100 Hz temperature Z -25C / Z 20C 2 3 Z -40C / Z 20C 6 10 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 23 B43704, B43724 High ripple current 85 C Ripple current capability Due to the ripple current capability of the contact elements, the following current upper limits must not be exceeded: Capacitor diameter 51.6 mm 64.3 mm 76.9 mm 90 mm IAC,max 45 A 66 A 74 A 89 A Dimensional drawings B43704 Ring clip/clamp mounting B43724 Threaded stud mounting For standard types with threaded stud the base is not insulated. Also refer to the mounting instructions in chapter "Capacitors with screw terminals Accessories". Screw terminals with UNF threads are available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 23 B43704, B43724 High ripple current 85 C Dimensions and weights (Standard capacitors, without heat sink) Terminal Dimensions (mm) with insulating sleeve d l 1 l1 1 l2 +0/1 d1 d2 max. a +0.2/0.4 Approx. weight (g) M5 M5 M5 M5 M5 51.6 +0.5/1 51.6 +0.5/1 51.6 +0.5/1 51.6 +0.5/1 51.6 +0.5/1 80.7 96.7 105.7 118.2 130.7 87.2 103.2 112.2 124.7 137.2 17 17 17 17 17 M12 M12 M12 M12 M12 10.2 10.2 10.2 10.2 10.2 22.2 22.2 22.2 22.2 22.2 220 250 280 320 350 M5 M5 M5 M5 M5 M5 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 80.7 96.7 105.7 118.2 130.7 143.2 87.2 103.2 112.2 124.7 137.2 149.7 17 17 17 17 17 17 M12 M12 M12 M12 M12 M12 13.2 13.2 13.2 13.2 13.2 13.2 28.5 28.5 28.5 28.5 28.5 28.5 370 400 440 510 600 630 M6 M6 M6 M6 M6 M6 M6 M6 M6 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 96.7 105.7 118.2 130.7 143.2 156.2 168.7 190.7 220.7 102.5 111.5 124.0 136.5 149.0 162.0 174.5 196.5 226.5 17 17 17 17 17 17 17 17 17 M12 M12 M12 M12 M12 M12 M12 M12 M12 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 31.7 31.7 31.7 31.7 31.7 31.7 31.7 31.7 31.7 570 620 700 800 840 920 1000 1150 1300 M6 M6 M6 M6 M6 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 120.0 144.5 170.0 197.0 221.0 125.3 149.8 175.3 202.3 226.3 17 17 17 17 17 M12 M12 M12 M12 M12 17.7 17.7 17.7 17.7 17.7 31.7 31.7 31.7 31.7 31.7 1000 1200 1400 1700 1900 Tolerances of terminal thread respectively stud thread: Terminal thread M5 and M6: 6H Thread of stud M12: 6g Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 23 B43704, B43724 High ripple current 85 C Packing Capacitor diameter d (mm) 51.6 64.3 76.9 90.0 Length l (mm) all all 168.7 >168.7 all Packing units (pcs.) 36 25 16 12 9 For ecological reasons the packing is pure cardboard. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 23 B43704, B43724 High ripple current 85 C Special designs PAPR terminal style With our PAPR terminal style (Protection Against Polarity Reversal) we offer an optional mechanical feature in addition to the visual polarity marking on the cover disk and the sleeve, which prevents from mounting in reverse polarity. The non-circular shape of the terminals and their arrangement perpendicular to each other enables the user to definitely prevent wrong mounting with respect to polarity (Poka Yoke). Dimensional drawing of PAPR terminal configuration: Dimensions for PAPR terminal style (mm): Can diameter d Terminal d3 0.1 d4 0.1 a +0.2/0.4 Min. reach of screw Standard For heat sink design mounting #050 #057 51.6 M5 10 13 22.2 9.5 64.3 M5 13 15 28.5 9.5 7.3 76.9 M6 13 15 31.7 12.0 9.7 90.0 M6 13 15 31.7 12.0 9.7 Tolerances of terminal thread respectively stud thread: Terminal thread M5 and M6: 6H Thread of stud M12: 6g All other dimensions of the capacitor such as diameter d, case length l and overall length l1 are identical with those of standard capacitors of this series. Please refer to the tables "Dimensions and weights" (standard types) and "Dimensions and weights for heat sink mounting" (special designs). Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 23 B43704, B43724 High ripple current 85 C For heat sink mounting Please refer to chapter "General technical information, 5.2.2 Base cooling with heat sink". This version is available only for capacitors without threaded stud and for diameters 64.3 mm. Regarding ripple current and useful life, please refer to chapter "General technical information, 5 Useful life". Dimensions and weights for heat sink mounting: Terminal Dimensions (mm) with insulating sleeve d l 1 l1 0.35 d2 max. M5 64.3 +0.5/1 80.7 86.3 13.2 M5 64.3 +0.5/1 96.7 102.3 13.2 64.3 +0.5/1 105.7 M5 111.3 13.2 M6 76.9 +0.5/1 96.7 101.6 17.7 M6 76.9 +0.5/1 105.7 110.6 17.7 76.9 +0.5/1 M6 118.2 123.1 17.7 M6 90.0 +0.5/1.5 120.0 124.4 17.7 90.0 +0.5/1.5 144.5 148.9 17.7 M6 Tolerances of terminal thread respectively stud thread: Terminal thread M5 and M6: 6H Thread of stud M12: 6g Dimensions for other sizes are available upon request. Insulated base Length l and l1 increase by +0.5 mm for types with threaded stud and insulated base. All other dimensions of the capacitor are identical with those of standard capacitors of this series. Please refer to the table "Dimensions and weights". Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 23 a +0.2/0.4 28.5 28.5 28.5 31.7 31.7 31.7 31.7 31.7 Approx. weight g 370 400 440 570 620 700 1000 1200 B43704, B43724 High ripple current 85 C Design options Design options Identification in third Remark block of ordering code Standard M000 Standard version without threaded stud: fully insulated with PVC Standard version with threaded stud: insulated with PVC sleeve, base not insulated Heat sink mounting M007 For capacitors with diameter d 64.3 mm and without threaded stud Insulated base M008 For capacitors with threaded stud, fully insulated with PVC sleeve and PP disc PAPR (terminal style) M050 PAPR with heat sink mounting M057 For capacitors with diameter d 64.3 mm and without threaded stud PAPR with insulated base M058 For capacitors with threaded stud, fully insulated with PVC sleeve and PP disc Accessories The following items are included in the delivery package, but are not fastened to the capacitors: For terminals Thread Toothed washers Screws/nuts Maximum torque M5 A 5.1 DIN 6797 DIN 7985 / ISO 7045-M5 x 10-5.6-Z 2.5 Nm thread depth t 8 mm M6 A 6.4 DIN 6797 DIN 7985 / ISO 7045-M6 x 12-5.6-Z 4.0 Nm thread depth t 9.5 mm For mounting M12 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm The following items must be ordered separately. For details, refer to chapter "Capacitors with screw terminals Accessories". Item Type Ring clips B44030 Clamps for capacitors with d 64.3 mm B44030 Insulating parts B44020 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 23 B43704, B43724 High ripple current 85 C Overview of available types The capacitance and voltage ratings listed below are available in different case sizes upon request. Other voltage and capacitance ratings are also available upon request. VR (V DC) 350 400 450 500 550 820 51.6 x 80.7 51.6 x 80.7 1000 51.6 x 96.7 51.6 x 96.7 51.6 x 80.7 51.6 x 96.7 51.6 x 105.7 64.3 x 80.7 51.6 x 80.7 51.6 x 96.7 51.6 x 118.2 64.3 x 80.7 51.6 x 130.7 64.3 x 96.7 Case dimensions d x l (mm) CR (F) 1200 1500 1800 51.6 x 80.7 51.6 x 96.7 51.6 x 105.7 64.3 x 80.7 51.6 x 130.7 64.3 x 96.7 64.3 x 96.7 2200 51.6 x 96.7 51.6 x 105.7 51.6 x 118.2 64.3 x 96.7 64.3 x 105.7 64.3 x 118.2 76.9 x 96.7 2700 51.6 x 96.7 51.6 x 118.2 64.3 x 96.7 64.3 x 118.2 76.9 x 96.7 64.3 x 130.7 76.9 x 105.7 3300 51.6 x 118.2 64.3 x 80.7 64.3 x 96.7 64.3 x 118.2 76.9 x 96.7 64.3 x 143.2 76.9 x 118.2 76.9 x 118.2 3900 51.6 x 130.7 64.3 x 96.7 64.3 x 105.7 64.3 x 130.7 76.9 x 105.7 76.9 x 130.7 76.9 x 143.2 90.0 x 120.0 4700 64.3 x 105.7 64.3 x 130.7 76.9 x 96.7 76.9 x 118.2 76.9 x 143.2 90.0 x 120.0 76.9 x 156.2 90.0 x 144.5 5600 64.3 x 118.2 76.9 x 96.7 64.3 x 143.2 76.9 x 118.2 76.9 x 130.7 90.0 x 120.0 76.9 x 168.7 90.0 x 144.5 76.9 x 190.7 90.0 x 144.5 6800 64.3 x 143.2 76.9 x 105.7 76.9 x 130.7 76.9 x 156.2 90.0 x 144.5 76.9 x 190.7 90.0 x 170.0 76.9 x 220.7 90.0 x 170.0 8200 76.9 x 118.2 76.9 x 156.2 90.0 x 120.0 76.9 x 190.7 90.0 x 144.5 76.9 x 220.7 90.0 x 197.0 90.0 x 197.0 10000 76.9 x 143.2 90.0 x 120.0 76.9 x 168.7 90.0 x 144.5 76.9 x 220.7 90.0 x 170.0 90.0 x 221.0 12000 76.9 x 168.7 90.0 x 144.5 76.9 x 220.7 90.0 x 170.0 90.0 x 197.0 15000 76.9 x 190.7 90.0 x 170.0 90.0 x 197.0 18000 90.0 x 197.0 90.0 x 221.0 22000 90.0 x 221.0 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 23 B43704, B43724 High ripple current 85 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 350 V DC 51.6 x 80.7 1800 51.6 x 96.7 2200 51.6 x 96.7 2700 51.6 x 118.2 3300 64.3 x 80.7 3300 51.6 x 130.7 3900 64.3 x 96.7 3900 64.3 x 105.7 4700 64.3 x 118.2 5600 76.9 x 96.7 5600 6800 64.3 x 143.2 76.9 x 105.7 6800 76.9 x 118.2 8200 76.9 x 143.2 10000 90.0 x 120.0 10000 76.9 x 168.7 12000 90.0 x 144.5 12000 15000 76.9 x 190.7 90.0 x 170.0 15000 90.0 x 197.0 18000 90.0 x 221.0 22000 ESRtyp 100 Hz 20 C m 36 30 24 20 20 17 17 15 12 13 10 11 8.8 7.2 7.1 6.1 5.9 5.0 4.8 4.0 3.4 ESRtyp 300 Hz 60 C m 13 10 8.9 7.2 7.9 6.3 6.5 5.7 4.9 5.2 4.1 4.6 3.9 3.2 3.1 2.7 2.5 2.4 2.1 1.8 1.6 50 40 34 28 28 24 24 20 17 18 14 15 13 11 11 9.0 8.8 7.8 7.4 6.6 6.0 Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,R 100 Hz 85 C A Ordering code (composition see below) 14.8 17.4 19.8 22.9 22.7 25.8 25.4 28.6 32.1 33.0 36.9 36.9 41.5 47.6 50.7 53.9 56.9 62.7 65.4 73.4 83.9 8.69 10.2 11.5 13.4 13.2 15.0 14.8 16.7 18.7 19.2 21.5 21.5 24.2 27.8 30.5 32.5 34.4 37.8 39.5 44.3 50.5 B437*4A4188M0## B437*4A4228M0## B437*4A4278M0## B437*4A4338M0## B437*4B4338M0## B437*4A4398M0## B437*4B4398M0## B437*4A4478M0## B437*4A4568M0## B437*4B4568M0## B437*4A4688M0## B437*4B4688M0## B437*4A4828M0## B437*4A4109M0## B437*4B4109M0## B437*4A4129M0## B437*4B4129M0## B437*4A4159M0## B437*4B4159M0## B437*4A4189M0## B437*4A4229M0## ## = Design 00 = standard 07 = heat sink mounting 08 = insulated base 50 = PAPR (terminal style) 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 9. Page 11 of 23 B43704, B43724 High ripple current 85 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 400 V DC 51.6 x 80.7 1500 51.6 x 96.7 1800 51.6 x 105.7 2200 51.6 x 118.2 2700 64.3 x 96.7 3300 64.3 x 105.7 3900 64.3 x 130.7 4700 76.9 x 96.7 4700 64.3 x 143.2 5600 76.9 x 118.2 5600 6800 76.9 x 130.7 76.9 x 156.2 8200 90.0 x 120.0 8200 76.9 x 168.7 10000 90.0 x 144.5 10000 76.9 x 220.7 12000 90.0 x 170.0 12000 15000 90.0 x 197.0 90.0 x 221.0 18000 ESRtyp 100 Hz 20 C m 75 60 50 40 34 28 24 24 20 20 17 14 14 12 11 9.6 9.6 7.7 6.5 ESRtyp 300 Hz 60 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,R 100 Hz 85 C A Ordering code (composition see below) 20 17 14 12 10 8.8 7.2 7.8 6.3 6.3 5.4 4.5 4.5 3.9 3.7 3.2 3.1 2.6 2.3 120 95 80 65 55 45 38 38 32 32 28 22 22 19 19 16 16 13 12 13.3 15.4 17.7 20.4 23.3 26.0 29.6 30.2 33.5 34.0 38.4 43.6 45.9 49.9 52.1 56.9 58.5 67.8 76.8 7.80 9.06 10.3 11.9 13.6 15.1 17.3 17.6 19.5 19.8 22.4 25.5 27.7 30.1 31.4 34.4 35.4 41.0 46.4 B437*4A9158M0## B437*4A9188M0## B437*4A9228M0## B437*4A9278M0## B437*4A9338M0## B437*4A9398M0## B437*4A9478M0## B437*4B9478M0## B437*4A9568M0## B437*4B9568M0## B437*4A9688M0## B437*4A9828M0## B437*4B9828M0## B437*4A9109M0## B437*4B9109M0## B437*4A9129M0## B437*4B9129M0## B437*4A9159M0## B437*4A9189M0## Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. ## = Design 00 = standard 07 = heat sink mounting 08 = insulated base 50 = PAPR (terminal style) 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 9. Page 12 of 23 B43704, B43724 High ripple current 85 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 450 V DC 51.6 x 80.7 1200 51.6 x 96.7 1500 51.6 x 105.7 1800 64.3 x 80.7 1800 51.6 x 118.2 2200 64.3 x 96.7 2200 64.3 x 96.7 2700 64.3 x 118.2 3300 76.9 x 96.7 3300 64.3 x 130.7 3900 3900 76.9 x 105.7 76.9 x 118.2 4700 76.9 x 130.7 5600 90.0 x 120.0 5600 76.9 x 156.2 6800 90.0 x 144.5 6800 76.9 x 190.7 8200 8200 90.0 x 144.5 76.9 x 220.7 10000 90.0 x 170.0 10000 90.0 x 197.0 12000 ESRtyp 100 Hz 20 C m 80 65 55 55 45 45 36 30 30 26 26 22 18 18 15 15 12 12 10 10 8.5 ESRtyp 300 Hz 60 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,R 100 Hz 85 C A Ordering code (composition see below) 24 18 16 16 13 13 11 9.0 9.2 7.8 8.0 6.7 5.8 5.5 4.8 4.5 4.0 4.0 3.4 3.3 2.8 130 100 85 85 70 70 55 45 45 40 40 34 28 28 24 24 19 19 16 16 14 12.0 14.3 16.2 16.5 18.7 18.8 21.3 24.5 25.5 27.5 28.3 31.8 35.6 38.1 40.6 42.7 46.2 48.2 53.3 54.7 61.8 7.11 8.47 9.59 9.77 11.0 11.1 12.6 14.4 15.0 16.2 16.7 18.7 21.0 23.2 24.0 26.1 28.2 29.4 32.6 33.4 37.7 B437*4A5128M0## B437*4A5158M0## B437*4A5188M0## B437*4B5188M0## B437*4A5228M0## B437*4B5228M0## B437*4A5278M0## B437*4A5338M0## B437*4B5338M0## B437*4A5398M0## B437*4B5398M0## B437*4A5478M0## B437*4A5568M0## B437*4B5568M0## B437*4A5688M0## B437*4B5688M0## B437*4A5828M0## B437*4B5828M0## B437*4A5109M0## B437*4B5109M0## B437*4A5129M0## Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. ## = Design 00 = standard 07 = heat sink mounting 08 = insulated base 50 = PAPR (terminal style) 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 9. Page 13 of 23 B43704, B43724 High ripple current 85 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 500 V DC 51.6 x 80.7 820 51.6 x 96.7 1000 51.6 x 96.7 1200 51.6 x 118.2 1500 64.3 x 80.7 1500 51.6 x 130.7 1800 64.3 x 96.7 1800 64.3 x 105.7 2200 64.3 x 118.2 2700 76.9 x 96.7 2700 3300 64.3 x 143.2 76.9 x 118.2 3300 76.9 x 130.7 3900 76.9 x 143.2 4700 90.0 x 120.0 4700 76.9 x 168.7 5600 90.0 x 144.5 5600 6800 76.9 x 190.7 90.0 x 170.0 6800 76.9 x 220.7 8200 90.0 x 197.0 8200 90.0 x 221.0 10000 ESRtyp 100 Hz 20 C m ESRtyp 300 Hz 60 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,R 100 Hz 85 C A Ordering code (composition see below) 110 90 75 60 60 50 50 40 34 34 28 28 24 20 20 17 17 14 14 12 11 9.4 30 24 22 17 18 14 15 12 10 10 8.3 8.4 7.2 6.2 6.0 5.2 5.0 4.4 4.2 3.8 3.6 3.0 170 140 120 90 90 75 75 65 55 55 45 45 36 30 30 26 26 22 22 18 18 15 9.71 11.1 12.6 14.7 14.9 16.8 16.8 19.2 22.0 22.9 25.4 26.0 29.0 32.8 35.1 37.3 39.0 42.9 44.0 49.2 49.7 57.0 5.09 5.80 6.57 7.68 7.79 8.77 8.77 10.0 11.5 11.9 13.2 13.5 15.1 17.1 18.7 19.9 20.8 22.8 23.5 26.2 26.6 30.4 B437*4A6827M0## B437*4A6108M0## B437*4A6128M0## B437*4A6158M0## B437*4B6158M0## B437*4A6188M0## B437*4B6188M0## B437*4A6228M0## B437*4A6278M0## B437*4B6278M0## B437*4A6338M0## B437*4B6338M0## B437*4A6398M0## B437*4A6478M0## B437*4B6478M0## B437*4A6568M0## B437*4B6568M0## B437*4A6688M0## B437*4B6688M0## B437*4A6828M0## B437*4B6828M0## B437*4A6109M0## Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. ## = Design 00 = standard 07 = heat sink mounting 08 = insulated base 50 = PAPR (terminal style) 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 9. Page 14 of 23 B43704, B43724 High ripple current 85 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 550 V DC 51.6 x 80.7 820 51.6 x 96.7 1000 51.6 x 105.7 1200 64.3 x 80.7 1200 51.6 x 130.7 1500 64.3 x 96.7 1500 64.3 x 96.7 1800 64.3 x 118.2 2200 76.9 x 96.7 2200 64.3 x 130.7 2700 2700 76.9 x 105.7 76.9 x 118.2 3300 76.9 x 143.2 3900 90.0 x 120.0 3900 76.9 x 156.2 4700 90.0 x 144.5 4700 76.9 x 190.7 5600 5600 90.0 x 144.5 76.9 x 220.7 6800 90.0 x 170.0 6800 90.0 x 197.0 8200 ESRtyp 100 Hz 20 C m ESRtyp 300 Hz 60 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,R 100 Hz 85 C A Ordering code (composition see below) 130 110 90 90 70 70 60 50 50 40 40 32 28 28 24 22 19 19 16 16 13 34 28 22 24 18 18 16 13 13 11 11 9.1 7.7 7.5 6.5 6.2 5.5 5.5 4.6 4.6 3.8 190 160 130 140 110 110 90 75 75 60 60 50 45 45 36 34 30 30 26 26 22 9.70 11.0 12.5 12.8 14.6 14.8 16.7 19.0 20.0 22.0 22.7 25.8 28.8 30.9 32.7 34.5 37.1 38.8 42.7 43.9 49.7 4.80 5.48 6.22 6.37 7.29 7.34 8.27 9.45 9.92 10.8 11.2 12.7 14.2 15.7 16.2 17.5 18.8 19.7 21.7 22.3 25.2 B437*4A7827M0## B437*4A7108M0## B437*4A7128M0## B437*4B7128M0## B437*4A7158M0## B437*4B7158M0## B437*4A7188M0## B437*4A7228M0## B437*4B7228M0## B437*4A7278M0## B437*4B7278M0## B437*4A7338M0## B437*4A7398M0## B437*4B7398M0## B437*4A7478M0## B437*4B7478M0## B437*4A7568M0## B437*4B7568M0## B437*4A7688M0## B437*4B7688M0## B437*4A7828M0## Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. ## = Design 00 = standard 07 = heat sink mounting 08 = insulated base 50 = PAPR (terminal style) 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 9. Page 15 of 23 B43704, B43724 High ripple current 85 C Useful life1) For useful life calculations, please use our web-based "AlCap Useful Life Calculation Tool", which can be found on the Internet under the following link: http://www.epcos.com/designtools/alu_useful_life/Useful_life.swf The AlCap Useful Life Calculation Tool provides calculations of useful life as well as additional data for selected capacitor types under operating conditions defined by the user. Frequency characteristics of ESRTypical behavior Impedance Z versus frequency f Typical behavior at 20 C 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 23 B43704, B43724 High ripple current 85 C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 23 B43704, B43724 High ripple current 85 C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 23 B43704, B43724 High ripple current 85 C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 C and a relative humidity of 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 23 B43704, B43724 High ripple current 85 C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazitat Nennkapazitat Serienkapazitat Serienkapazitat bei Temperatur T Kapazitat bei Frequenz f Gehausedurchmesser, Nennma Maximaler Gehausedurchmesser Eigeninduktivitat Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T T TA TC TB t t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulassiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehauselange, Nennma Maximale Gehauselange (ohne Anschlusse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehausetemperatur Temperatur des Gehausebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 20 of 23 B43704, B43724 High ripple current 85 C Symbol V VF Vop VR VS XC XL Z ZT tan 0 r English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitatszahl Kreisfrequenz; 2 f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 23 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements ("CSR") TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. Page 22 of 23 Important notes 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2018-10 Page 23 of 23