ATC GENERAL PURPOSE CAPACITORS: X7R DIELECTRIC ELECTRICAL CHARACTERISTICS CAPACITANCE RANGE: 220 pF to 2.2 F. TEMPERATURE CHARACTERISTIC: 15% with 0 Vdc applied. W L OPERATING TEMPERATURE RANGE: -55C to +125C. DISSIPATION FACTOR: 2.5% (max.) @ 25C, @1 MHz 1000 pF; @1 KHz >1000 pF T (MAX.) MB INSULATION RESISTANCE @ + 25C and rated Vdc: 100,000 megohms (min.) or 1000 ohm-farads (min.), whichever is less. DIELECTRIC WITHSTANDING VOLTAGE: 250% of rated voltage for 5 1 seconds, 50 milliamps (max.). AGING RATE: 1% (maximum) per decade. Unless otherwise specified all test data is at + 25C. Temperature Coefficient of Capacitance Dissipation Factor vs. Temperature Voltage Coefficient of Capacitance Temperature (Celsius) Temperature (Celsius) Minimum IR vs. Temperature Impedance vs. Frequency Temperature (Celsius) A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com 4 w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC GENERAL PURPOSE CAPACITORS: X7R DIELECTRIC SIZE 0402 0504 0603 0805 1206 1210 1812 2225* Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .126 (3.20) .126 (3.20) .177 (4.50) .220 (5.59) Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .098 (2.50) .126 (3.20) .250 (6.35) Tol. L & W .004 (0.10) .006 (.152) .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .010 (0.25) .015 (0.38) T Max. .025 (0.64) .044 (1.12) .035 (0.89) .051(1.30) .051 (1.30) .067 (1.70) .067 (1.70) .070 (1.78) .004 .012 .005 .015 .005 .015 Term. (MB) Min. Max. Min. Cap. Max. Cap. (code) & WVDC (.10) (.30) 121 (.12) (.38) 221 (.12) (.38) .010 .028 331 (.25) (.71) .010 .028 471 (.25) (.71) .010 .028 (.25) (.71) .010 .030 (.25) (.76) .010 .030 (.25) (.76) 102 102 122 183 475 10V 16V 104 393 224 335 334 684 125 225 25V 273 273 104 474 274 564 105 185 50V 103 273 104 224 474 105 225 335 100V 272 153 103 563 154 105 105 225 200V 182 103 682 333 823 184 334 105 500V 103 273 563 104 334 1000V 272 682 153 273 124 102 222 392 183 2000V 5000V * IR and Vapor Phase soldering only recommended. Dimensions shown in inches (mm) PART NUMBER CODE 0805 X7R 10 2 K T 2 A T Size Code Packaging: T=7" Reel, B=Bulk *R=13" Reel - *Special Order Temperature Characteristic Marking: A=No mark *S=EIA Code - *Special Order Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A Indicates number of zeros following digits of capacitance in picofarads WVDC 7 1 10 16 2 3 4 5 6 9 8 25 50 100* 200* 500* 1000* *2000 *5000 *Special Order - Consult Factory CAPACITANCE TOLERANCE *J K Code 5 10 Tol. Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant W = Tin/Lead, Solder Plated over Nickel Barrier** C = Palladium Silver, (non-magnetic), RoHS Compliant** **Consult ATC for availability *Tighter tolerances available. STANDARD EIA CAPACITANCE VALUES REFERENCE TABLE Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code 0R5 0.5 6R8 6.8 560 56 471 470 392 3900 273 1R0 1.0 8R2 8.2 680 68 561 560 472 4700 333 1R2 1.2 100 10 820 82 681 680 562 5600 393 1R5 1.5 120 12 101 100 821 820 682 6800 473 1R8 1.8 150 15 121 120 102 1000 822 8200 563 2R2 2.2 180 18 151 150 122 1200 Cap. Code Cap.F 683 103 .010 2R7 2.7 220 22 181 180 152 1500 823 123 .012 3R3 3.3 270 27 221 220 182 1800 104 153 .015 3R9 3.9 330 33 271 270 222 2200 124 183 .018 4R7 4.7 390 39 331 330 272 2700 154 223 .022 5R6 5.6 470 47 391 390 332 3300 184 A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w . a t c e r a m i c Cap. Code Cap. F 224 .22 274 .27 334 .33 394 .39 474 .47 564 .56 684 .68 824 .82 105 1.0 125 1.2 155 1.5 Cap. Code Cap. F 185 1.8 225 2.2 275 2.7 335 3.3 395 3.9 475 4.7 565 5.6 685 6.8 825 8.2 106 10.0 126 12.0 156 15.0 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Cap.F .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m 5