SS12E
THRU
SS110E
1 Amp Schottky
Rectifier
20 to 100 Volts
Features
•Low Forward Voltage
•Guard Ring Protection
•High Current Capability
Maximum Ratings
•Operating Junction Temperature: -55°C to +125°C (SS12E~SS14E)
•Storage Temperature: -55°C to +150°C
•Maximum Thermal Resistance; 28°C/W Junction To Lead
SS12E SS12 20V 14V 20V
SS13E SS13 30V 21V 30V
SS14E SS14 40V 28V 40V
SS15E SS15 50V 35V 50V
SS16E SS16 60V 42V 60V
SS18E SS18 80V 56V 80V
SS110E SS110 100V 70V 100V
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current IF(AV) 1.0A TL
= 100°C
Peak Forward Surge
Current IFSM 30A 8.3ms, half sine
Maximum
Instantaneous
Forward Voltage
SS12E~14E
SS15E~16E
SS18E-110E
VF
.60V
.70V
.85V
IFM = 1.0A;
TJ = 25°C*
Typical Junction
Capacitance
SS12E - SS16E
SS18E-SS110E CJ110pF
30pF Measured at
1.0MHz, VR=4.0V
*Pulse test: Pulse width 300 µsec, Duty cycle 2%
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
IR 0.5mA
20mA TA= 25°C
TA= 100°C
www.mccsemi.com
1 of 3
0.070”
0.090”
0.085”
SUGGESTED SOLDER
PAD LAY
OU
T
H
J
E
G
A
B
D
C
Cathode Band
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .079 .096 2.01 2.44
C .002 .008 .05 .20
D --- .02 --- .51
E .030 .060 .76 1.52
G .189 .208 4.80 5.30
H .157 .180 4.00 4.57
J .090 .115 2.29 2.92
Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
Revision: F
2016/05/16
•Epoxy meets UL 94 V-0 flammability rating
•Moisture Sensitivity Level 1
•Halogen free available upon request by adding suffix "-HF"
•Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
MCC
Catalog Device
Marking Maximum
Recurrent
Number Peak Reverse
Voltage
Maximum
RMS
Voltage
Maximum
DC
Blocking
Voltage
90°C/W Junction To Ambient
B.045.0711.151.80
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
SMAE
-55°C to +150°C(SS15E~SS110E)
Micro Commercial Components
M C C
R
SS12E thru SS110E
Instantaneous Forward Current - Amperesversus
Instantaneous Forward Voltage - Volts
Figure 1
Typical Forward Characteristics
4
6
20
10
Amps
.4 .6 .8 1.0 1.2 1.4
.01
.02
.04
.06
.1
.2
.4
.6
1
2
25°C
Volts
SS12E,SS14E
SS15E-16E
SS18-E~SS110E
Average Forward Rectified Current - Amperesversus
Lead Temperature -°C
Figure 2
Forward Derating Curve
017550 75 100 125
0
.2
.4
.6
Single Phase, Half Wave
60Hz Resistive or Inductive
Load
Amps
°C
150
.8
1.0
1.2
1 100
4
0
10
20
30
8
Figure 3
Peak Forward Surge Current
Peak Forward Surge Current - Amperesversus
Number Of Cycles At 60Hz - Cycles
Amps
Cycles
2610 20 60 80
40
40
50
60
www.mccsemi.com
2 of 3
Revision: F
2016/05/16
SS12E - SS14E
SS15E - SS110E
Micro Commercial Components
M C C
R
Revision: F 2016/05/16
www.mccsemi.com
3 of 3
Device Packing
Part Number-TPTape&Reel: 6Kpcs/Reel
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
Micro Commercial Components
M C C
R
