WT30-AT002 - Omron - Product.Network

FA Wireless SS Terminals WT30 1

FA Wireless SS Terminals

WT30

Construct a Wireless System for ON/OFF

Data Collection That Is Ideal for Monitoring

Production Site Equipment

• Wireless Slave Station equipped with I/O.

• Height of 90 mm and DIN Rail mounting enables installation in

control panels.

• Easily check wireless communications status from indicator

display.

• I/O Slave Stations can also be used as Slave Stations in WD30

systems.

• Conforms to radio wave standards for Japan, China (pending),

USA, and Europe.

Ordering Information

■List of Models

Note: An Antenna and Mounting Brackets are not included with the Wireless SS Terminal.

■Accessories

Antennas

Communications Cables

Other

Applicable Standards

•FCC part 15.247 (USA)

•EN 300 440-2 (Europe)

•ARIB STD-T66 (Japan)

• (China) (approval pending)

Main Class 2 Power Supplies

OMRON Switching Power Supplies

•S8VS (15 W, 30 W, 60 W type)

•S82K (15 W, 30 W, 50 W, 90 W type)

Applicable Countries

Wireless standards have been met for the following countries. The

product cannot be used in any other countries.

Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungry, Iceland, Ireland, Italy,

Japan, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland,

UK, USA

Wireless Unit model Type Specifications/No. of I/O points

WT30-M01-FLK Serial master RS-232C

WT30-SID16 I/O slaves 16 DC inputs (NPN/PNP)

WT30-SMD16 8 DC inputs (NPN/PNP) + 8 transistor outputs (NPN)

WT30-SMD16-1 8 DC inputs (NPN/PNP) + 8 transistor outputs (PNP)

Model Type

WT30-AT001 Magnet-base Antenna (2 antennas per set)

WT30-AT002 Flat Diversity Antenna (1 antenna)

WT30-AT003 Pencil Antenna (2 antennas per set)

Model Length Application

XW2Z-0100U-3 1 m For personal computer

XW2Z-0200U-3 2 m

XW2Z-0500U-3 5 m

XW2Z-0200U-5 2 m Cross cable for PLC

XW2Z-0500U-5 5 m

Model Type

WT30-FT001 DIN Rail Mounting Bracket (for TH35-7.5)

WT30-FT002 DIN Rail Mounting Bracket (for TH35-15)

WT30-FT003 Surface Mounting Bracket (screw-mounting)

(2 brackets per set)

WT30-FT011 Flat Diversity Antenna Mounting Brackets

(with magnets)

WT30-CA2M Antenna Extension Cable (1 cable, 2 m)

Conformity to Safety Standards

Always use a Class 2 power supply to conform to UL standards.

Conformity to EN Standards

Use a DC power line less than 3 m to conform to EN standards. If a

power line of 3 m or longer is required, extend the length at the

Switching Power Supply’s primary side (i.e., the AC power line).

2FA Wireless SS Terminals WT30

Specifications

■Ratings

Note: 1. Provide a power supply of at least 15 W, considering the inrush current generated at startup.

2. Use the WT30-FT003 Surface Mounting Bracket when installing the WT30 in environments subject to vibration.

■Wireless Interface Specifications

Note: Varies according to the installation environment.

■Package Contents

• WT30 FA Wireless SS Terminal • Terminal labels (I/O Slaves only)

• Instruction Sheet • Adhesive non-slip feet (Serial Master only)

Item WT30-M01-FLK Serial Master WT30-SID16/SMD16/SMD16-1 I/O Slaves

Power supply

(wireless

communications

power supply)

Rated voltage 24 V DC

Allowable voltage

range

20.4 to 26.4 V DC

Power consumption 3 W max. (See note 1.)

Error output/output

power supply

(for output circuits)

Rated voltage --- 24 V DC

Allowable voltage

range

--- 20.4 to 26.4 V DC

Insulation resistance 20 MΩ min. (at 100 V DC) between the power

supply and chassis

20 MΩ min. (at 100 V DC) between the power

supply and all I/O and I/O power supply and

between the power supply and chassis

Dielectric strength 1,500 V AC for 1 min between power supply

and chassis

1,500 V AC for 1 min between the power supply

and all I/O and I/O power supply and between

the power supply and chassis

Noise immunity IEC61000-4-4. 1 kV (power supply line)

Vibration resistance (See note 2.) JIS C0040

Frequency: 10 to 55 Hz; Amplitude of 0.35 mm or acceleration of 50 m/s2, whichever is smaller

(DIN Rail mounting: single amplitude of 0.1 mm or acceleration of 15 m/s2)

10 sweeps of 8 min each (i.e., 80 min in total) in X, Y, Z directions

Shock resistance Conforms to JIS C0041: 300 m/s2 3 times each in X, Y, and Z directions

Ambient operating temperature −10 to 55°C (with no condensation or icing)

(with the Terminal mounted with the dust-proof

label facing up)

Number of simultaneously ON I/O points

10 max.: −10 to 55°C (with no condensation or

icing)

16 max.: −10 to 50°C (with no condensation or

icing)

(with the Terminal mounted with the dust-proof

label facing up)

Ambient operating humidity 25% to 85% (with no condensation or icing)

Ambient environment No corrosive gases

Storage temperature −25 to 65°C (with no condensation or icing)

Protective structure IP20

Terminal construction Power supply and I/O Screwless terminal block (Phoenix Contact FFKDS/V1-5.08 or equivalent)

Serial D-sub, 9-pin (female) Inch screws (OMRON

XM2F-0910-132 or equivalent), Master station

only

---

Safety standards UL: UL508 (Listing)

Weight 330 g max.

Item Specifications

Wave type Spread Spectrum (direct sequence; DS-SS)

Communication method Simplex

Frequency band 2,401 to 2,480.2 MHz

Number of channels 67 channels (based on switching)

Transmitter output power 10 mW/MHz

Baud rate between wireless stations 100 kbps

Communications distance (See note.) Indoors: 60 m min. (approx. 50 m min. with Magnet-base Antennas and Flat Diversity Antennas)

Outdoors: Approx. 300 m min. (anticipated distances)

(without using relay stations)

Error detection method CRC-CCITT (16 bits)

Relay functions One stage using I/O slave for the serial master configuration.

Number of stations per area (See note.) 10 sets max. (recommended)

Number of I/O Slaves connected 64 max.

FA Wireless SS Terminals WT30 3

Nomenclature

■Serial Master Station

■I/O Slave Station

■Unit No. Switch

Set the unit number of the Serial Master Station

Default: 00

■Node Setting Switch (WNODE)

Set the number of connected I/O Slave Stations.

Set the node number of the Slave Stations being used as I/O Slave

Stations. The Slave Station functions as a relay station when the

node number is set to 99.

Default: 01

■Channel Setting Switch (WCH)

Set the communications frequency.

Default: 02

■Function Setting Switch

Serial Master Station

I/O Slave Station

Antenna terminal (ANT1)

Status

indicators

RS-232C Terminal

Connect the PLC, personal computer, etc.

Power supply terminal

Supply power to the WT30.

Unit No. switch

Set the unit number of the Serial Master Station.

Node setting switch (WNODE)

Set the number of connected I/O Slave Stations.

Channel setting switch (WCH)

Set the communications frequency

channel.

Antenna terminal (ANT2)

Received

signal

strength

indicator

Special

function

switch

Function setting switch

Make the detailed settings

for RUN/TEST/SET mode.

Mode selection switch

Switch between RUN,

TEST, and SET mode.

Serial communications

setting switch

Set the baud rate.

Status

indicators

Power supply terminal

Supply power to the WT30

and output circuits.

Mode selection switch

Switch between RUN,

TEST, and SET mode.

Node setting switch (WNODE)

Set the unit number of the I/O Slave Station.

I/O terminal status indicators (0 to 7 or 8 to 15)

The contact status is displayed.

Channel setting switch (WCH)

Set the communications frequency.

Antenna terminal (ANT2)

Received

signal

strength

indicator

Special function switch

Antenna terminal (ANT1)

Function setting switch

Make the detailed settings

for RUN/TEST mode.

I/O terminals

Connect the contact

signals.

No. Applicable

mode

ON functions OFF functions

1RUN mode Holds I/O status data

when a

communications error

occurs.

Clears I/O status data

when a

communications error

occurs.

2Enable scan list Disable scan list

3Relays used Relays not used

4TEST mode Signal strength monitor

disabled

Signal strength monitor

enabled

5All channels

automatically switched

Specified channels

6--- ---

7SET mode Scan list recognition Nothing done

8Registers specified I/O

slave

Registers all I/O slaves

automatically

9Recognizes serial

numbers

Ignores serial numbers

10 Not used --- ---

No. Applicable

mode

ON functions OFF functions

1RUN mode Holds I/O status data

when a

communications error

occurs.

Clears I/O status data

when a

communications error

occurs.

2Input hold Normal mode

3Input filter: 100 ms Input filter: 10 ms

4TEST mode Signal strength monitor

disabled

Signal strength monitor

enabled

5All channels

automatically switched

Specified channels

6Installation test

function

Nothing done

7 to

Not used --- ---

4FA Wireless SS Terminals WT30

■Serial Communications Setting

Switch

Note: For example, if pins number 2, 3, and 4 are all ON, the total is

7, which corresponds to a baud rate of 115,200 bps.

■Display

Note: When using the WD30 as the Serial Master Station, the ERR

indicator will light if normal I/O communications are not

possible due to an error in the host network.

No. Function ON OFF

1Communications setting

selection

Detailed

settings

(settings for

No. 2 to 8

used)

Default settings

(baud rate: 9,600 bps;

data length: 7 bits;

parity: even; stop bits:

Settings for No. 2 to 8

are ignored.

2Baud rate (bps)

(See note.)

Total value = 0: 1,200

= 1: 2,400

= 2: 4,800

= 3: 9,600

= 4: 19,200

= 5: 38,400

= 6: 57,600

= 7: 115,200

320

440

5Data length 8 bits 7 bits

6Parity None Yes

7Odd Even

8Stop bits 1 bit 2 bits

Indicator Color Status Meaning (primary error)

PWR Green Lit Power is being supplied.

Not lit Power is not being supplied.

ERR

(Slave Station)

Red Lit Error output is ON:

Wireless device error or

wireless communications

error. (See note)

Not lit No wireless device error or

wireless communications

error.

COMM

(Master Station)

Yellow Lit Serial communications in

progress.

Not lit No serial communications.

0 to 15

(Slave Station)

Yellow Lit/Not lit ON/OFF status for input or

output signals

RSSI Red/

Yellow/

Green

Lit/

All not lit

Receiving Signal Strength

Indicator monitor: Number of

indicators lit (receiving signal

strength 1 to 9)

Receiving signal strength less

than 0 to 1.

(Module Status)

Green Lit Communications are normal.

Flashing TEST mode or SET mode has

been activated.

Red Lit A fatal error has occurred that

cannot be recovered from.

Replace the Unit

Flashing A non-fatal error has occurred

that can be recovered from by

resetting the system.

--- Not lit Power is not being supplied or

the system is resetting.

(Wireless

Status)

Green Lit The station has joined the

wireless network.

Flashing Permission to join wireless

network received from Serial

Master Station (Slave Station)

Red Lit A fatal error has occurred that

cannot be recovered from.

Flashing Error from which recovery is

possible

--- Not lit Wireless communications are

not in progress.

FA Wireless SS Terminals WT30 5

Wiring

■Serial Master Station (WT30-M01-FLK)

I/O Characteristics

■I/O Slave Station

RS-232C Connector

WT30 Power supply terminal

Supply power to the Unit

54321

9876

D-sub, 9-pin, Female End at WT30

Pin No. Signal I/O direction

1 --- ---

2RDOutput

3 SD Input

4 --- ---

5 SG ---

6 --- ---

7 --- ---

8 --- ---

9 --- ---

VG 01 2 3

COM

4567

COM ERRP

24 V DC

0 V 8 9 10 11

COM

12 13 14 15

COM ERRN

Power supply Inputs Inputs

Inputs Inputs

Error output

(

NPN

)

Error output

power supply

Error output

(PNP)

Error output

(NPN)

OUT

24 V DC

0 V 0 1 2 3

COM

4567

COM ERRN

Power supply Outputs Outputs

VG0 1 2 3

COM

4567

COM ERRP

Inputs Inputs

Error output/output

power supply

Error output

(PNP)

WT30-SID16

WT30-SMD16

WT30-SMD-16-1

Item Specifications

Input Characteristics

Input voltage 24 V DC

Allowable

voltage range

20.4 to 26.4 V DC

Input

impedance

4.7 kΩ (typical)

Input current 5 mA (typical)

ON voltage/

current

characteristics

17.4 V DC, 3.0 mA min.

OFF voltage/

current

characteristics

5.0 V DC, 1.0 mA max.

Input filter 10 ms/100 ms (Selected using switch.)

Output/Error Output

Characteristics

Input voltage 24 V DC

Allowable

voltage

20.4 to 26.4 V DC

Max.

switching

current

100 mA max. per output (at 20.4 to 26.4 V DC)

Simultaneous usage of error output NPN/PNP

is not possible.

Leakage

current

0.1 mA max.

Residual

voltage

1.0 V max.

Fuse One for every two outputs except for error

output circuits, which have one for every NPN/

PNP output. (No fuses can be replaced by the

user.)

6FA Wireless SS Terminals WT30

Input Circuit Diagram

Error Output Circuit Diagram

Output Circuit Diagram (NPN)

Output Circuit Diagram (PNP)

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Serial Master Station

WT30-M01-FLK

I/O Slave Station

WT30-SID16

WT30-SMD16

WT30-SMD16-1

IN 0

IN 1

IN 2

IN 15

COM (IN)

Secondary internal circuit

ERRN

ERRP

Fuse

Secondary internal circuit

Fuse

OUT 0

OUT 1

OUT 2

OUT 7

Secondary internal circuit

Fuse

OUT 0

OUT 1

OUT 2

OUT 7

Fuse

OUT

Secondary internal circuit

Fuse

Four, 5 dia.

(15)

60 40

13.3 105 13.3

120

Surface mounting bracket

WT30-FT003

105

7.3

DIN rail mounting bracket

WT30-FT001 or WT30-FT002

FA Wireless SS Terminals WT30 7

With Magnet-base

Antenna

WT30-AT001

With Flat Diversity

Antenna

WT30-AT002

With Pencil Antenna

WT30-AT003

Magnet-base Antenna

WT30-AT001

Flat Diversity Antenna

WT30-AT002

Pencil Antenna

WT30-AT003

DIN Rail Mounting

Bracket

WT30-FT001

WT30-FT002

Surface Mounting

Bracket

WT30-FT003

Flat Diversity Antenna Mounting

Brackets (with magnets)

WT30-FT011

(34)

(32)

(38)

4.6

R38

R40

I/O Slave Station

DIN Rail mounting bracket

WT30-FT001 or

WT30-FT002

(23)

R50

I/O Slave Station DIN Rail mounting bracke

WT30-FT001 or

WT30-FT002

150 40

(46)

Surface Mounting Bracket

WT30-FT003

Serial Master Station

115

2010

35.8 dia.

10.5 dia.

57.5

2010

57.5

Three, 3 dia.

10.5 dia

Terms and Conditions of Sale

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

part of all quotes, agreements, purchase orders, acknowledgments, price lists,

catalogs, manuals, brochures and other documents, whether electronic or in

writing, relating to the sale of products or services (collectively, the "Products")

by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron

objects to any terms or conditions proposed in Buyer’s purchase order or other

documents which are inconsistent with, or in addition to, these Terms.

2. Prices; Payment Terms. All prices stated are current, subject to change with-

out notice by Omron. Omron reserves the right to increase or decrease prices

on any unshipped portions of outstanding orders. Payments for Products are

due net 30 days unless otherwise stated in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices

sent to Buyer after deducting transportation charges, taxes and duties, and will

be allowed only if (i) the invoice is paid according to Omron’s payment terms

and (ii) Buyer has no past due amounts.

4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or

the maximum legal rate, whichever is less, on any balance not paid within the

stated terms.

5. Orders. Omron will accept no order less than $200 net billing.

6. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-

tation or sale of the Products.

7. Taxes. All taxes, duties and other governmental charges (other than general

real property and income taxes), including any interest or penalties thereon,

imposed directly or indirectly on Omron or required to be collected directly or

indirectly by Omron for the manufacture, production, sale, delivery, importa-

tion, consumption or use of the Products sold hereunder (including customs

duties and sales, excise, use, turnover and license taxes) shall be charged to

and remitted by Buyer to Omron.

8. Financial. If the financial position of Buyer at any time becomes unsatisfactory

to Omron, Omron reserves the right to stop shipments or require satisfactory

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related agreement, Omron may (without liabil-

ity and in addition to other remedies) cancel any unshipped portion of Prod-

ucts sold hereunder and stop any Products in transit until Buyer pays all

amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all

unpaid accounts.

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Omron against all related costs or expenses.

10. Force Majeure. Omron shall not be liable for any delay or failure in delivery

resulting from causes beyond its control, including earthquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:

a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship

except in “break down” situations.

b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall

constitute delivery to Buyer;

c. All sales and shipments of Products shall be FOB shipping point (unless oth-

erwise stated in writing by Omron), at which point title and risk of loss shall

pass from Omron to Buyer; provided that Omron shall retain a security inter-

est in the Products until the full purchase price is paid;

d. Delivery and shipping dates are estimates only; and

e. Omron will package Products as it deems proper for protection against nor-

mal handling and extra charges apply to special conditions.

12. Claims. Any claim by Buyer against Omron for shortage or damage to the

Products occurring before delivery to the carrier must be presented in writing

to Omron within 30 days of receipt of shipment and include the original trans-

portation bill signed by the carrier noting that the carrier received the Products

from Omron in the condition claimed.

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the

Products will be free from defects in materials and workmanship for a period of

twelve months from the date of sale by Omron (or such other period expressed

in writing by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.

BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. Omron further disclaims all warranties and responsibility of

any type for claims or expenses based on infringement by the Products or oth-

erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-

gation hereunder shall be, at Omron’s election, to (i) replace (in the form

originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying

Product, or (iii) repay or credit Buyer an amount equal to the purchase price of

the non-complying Product; provided that in no event shall Omron be responsi-

ble for warranty, repair, indemnity or any other claims or expenses regarding

the Products unless Omron’s analysis confirms that the Products were prop-

erly handled, stored, installed and maintained and not subject to contamina-

tion, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Compa-

nies shall not be liable for the suitability or unsuitability or the results from the

use of Products in combination with any electrical or electronic components,

circuits, system assemblies or any other materials or substances or environ-

ments. Any advice, recommendations or information given orally or in writing,

are not to be construed as an amendment or addition to the above warranty.

See http://oeweb.omron.com or contact your Omron representative for pub-

lished information.

14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE

FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS

BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual

price of the Product on which liability is asserted.

15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and

their employees from and against all liabilities, losses, claims, costs and

expenses (including attorney's fees and expenses) related to any claim, inves-

tigation, litigation or proceeding (whether or not Omron is a party) which arises

or is alleged to arise from Buyer's acts or omissions under these Terms or in

any way with respect to the Products. Without limiting the foregoing, Buyer (at

its own expense) shall indemnify and hold harmless Omron and defend or set-

tle any action brought against such Companies to the extent based on a claim

that any Product made to Buyer specifications infringed intellectual property

rights of another party.

16. Property; Confidentiality. Any intellectual property in the Products is the exclu-

sive property of Omron Companies and Buyer shall not attempt to duplicate it

in any way without the written permission of Omron. Notwithstanding any

charges to Buyer for engineering or tooling, all engineering and tooling shall

remain the exclusive property of Omron. All information and materials supplied

by Omron to Buyer relating to the Products are confidential and proprietary,

and Buyer shall limit distribution thereof to its trusted employees and strictly

prevent disclosure to any third party.

17. Export Controls. Buyer shall comply with all applicable laws, regulations and

licenses regarding (i) export of products or information; (iii) sale of products to

“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of

regulated technology or information.

18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right

and no course of dealing between Buyer and Omron shall operate as a waiver

of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder

without Omron's written consent. (c) Law. These Terms are governed by the

law of the jurisdiction of the home office of the Omron company from which

Buyer is purchasing the Products (without regard to conflict of law princi-

ples). (d) Amendment. These Terms constitute the entire agreement between

Buyer and Omron relating to the Products, and no provision may be changed

or waived unless in writing signed by the parties. (e) Severability

. If any provi-

sion hereof is rendered ineffective or invalid, such provision shall not invalidate

any other provision. (f) Setoff. Buyer shall have no right to set off any amounts

against the amount owing in respect of this invoice. (g) Definitions. As used

herein, “including” means “including without limitation”; and “Omron Compa-

nies” (or similar words) mean Omron Corporation and any direct or indirect

subsidiary or affiliate thereof.

Certain Precautions on Specifications and Use

1. Suitability of Use. Omron Companies shall not be responsible for conformity

with any standards, codes or regulations which apply to the combination of the

Product in the Buyer’s application or use of the Product. At Buyer’s request,

Omron will provide applicable third party certification documents identifying

ratings and limitations of use which apply to the Product. This information by

itself is not sufficient for a complete determination of the suitability of the Prod-

uct in combination with the end product, machine, system, or other application

or use. Buyer shall be solely responsible for determining appropriateness of

the particular Product with respect to Buyer’s application, product or system.

Buyer shall take application responsibility in all cases but the following is a

non-exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Use in consumer products or any use in significant quantities.

(iii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety equip-

ment, and installations subject to separate industry or government regulations.

(iv) Systems, machines and equipment that could present a risk to life or prop-

erty. Please know and observe all prohibitions of use applicable to this Prod-

uct.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT

ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-

ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Omron Companies shall not be responsible for the

user’s programming of a programmable Product, or any consequence thereof.

3. Performance Data. Data presented in Omron Company websites, catalogs

and other materials is provided as a guide for the user in determining suitabil-

ity and does not constitute a warranty. It may represent the result of Omron’s

test conditions, and the user must correlate it to actual application require-

ments. Actual performance is subject to the Omron’s Warranty and Limitations

of Liability.

4. Change in Specifications. Product specifications and accessories may be

changed at any time based on improvements and other reasons. It is our prac-

tice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications for

your application. Please consult with your Omron’s representative at any time

to confirm actual specifications of purchased Product.

5. Errors and Omissions. Information presented by Omron Companies has been

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors or omissions.

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at www.omron247.com – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

OMRON ELECTRONICS LLC

1 Commerce Drive

Schaumburg, IL 60173

Tel: 847.843.7900

For U.S. technical support or other

inquiries: 800.556.6766

OMRON CANADA, INC.

885 Milner Avenue

Toronto, Ontario M1B 5V8

Tel: 416.286.6465

MEXICO SALES OFFICES

Mexico, D.F. 555.660.3144

Ciudad Juárez 656.623.7083

Monterrey, N.L. 818.377.4281

Querétaro 442.135.4510

BRAZIL SALES OFFICE

Sao Paulo 55.11.2101.6310

ARGENTINA SALES OFFICE

Cono Sur 54.114.787.1129

CHILE SALES OFFICE

Santiago 562.206.4592

OTHER LATIN AMERICAN SALES

Florida 954.227.2121

OMRON ON-LINE

Global -

www.omron247.com

USA -

www.omron247.com

Canada -

www.omron.ca

Brazil -

www.omron.com.br

Latin America -

www.espanol.omron.com

Cat. No. N139-E1-01.........................3/07............Specifications subject to change without notice..............Printed in USA