FA Wireless SS Terminals WT30 Construct a Wireless System for ON/OFF Data Collection That Is Ideal for Monitoring Production Site Equipment * Wireless Slave Station equipped with I/O. * Height of 90 mm and DIN Rail mounting enables installation in control panels. * Easily check wireless communications status from indicator display. * I/O Slave Stations can also be used as Slave Stations in WD30 systems. * Conforms to radio wave standards for Japan, China (pending), USA, and Europe. Ordering Information List of Models Wireless Unit model Type Specifications/No. of I/O points WT30-M01-FLK Serial master RS-232C WT30-SID16 I/O slaves 16 DC inputs (NPN/PNP) WT30-SMD16 8 DC inputs (NPN/PNP) + 8 transistor outputs (NPN) WT30-SMD16-1 8 DC inputs (NPN/PNP) + 8 transistor outputs (PNP) Note: An Antenna and Mounting Brackets are not included with the Wireless SS Terminal. Accessories Antennas Applicable Standards Model Type WT30-AT001 Magnet-base Antenna (2 antennas per set) WT30-AT002 Flat Diversity Antenna (1 antenna) WT30-AT003 Pencil Antenna (2 antennas per set) Communications Cables Model Length XW2Z-0100U-3 1m XW2Z-0200U-3 2m XW2Z-0500U-3 5m XW2Z-0200U-5 2m XW2Z-0500U-5 5m Conformity to Safety Standards Application For personal computer Always use a Class 2 power supply to conform to UL standards. Main Class 2 Power Supplies OMRON Switching Power Supplies Cross cable for PLC * S8VS (15 W, 30 W, 60 W type) * S82K (15 W, 30 W, 50 W, 90 W type) Conformity to EN Standards Other Model * FCC part 15.247 (USA) * EN 300 440-2 (Europe) * ARIB STD-T66 (Japan) * (China) (approval pending) Type WT30-FT001 DIN Rail Mounting Bracket (for TH35-7.5) WT30-FT002 DIN Rail Mounting Bracket (for TH35-15) WT30-FT003 Surface Mounting Bracket (screw-mounting) (2 brackets per set) WT30-FT011 Flat Diversity Antenna Mounting Brackets (with magnets) WT30-CA2M Antenna Extension Cable (1 cable, 2 m) Use a DC power line less than 3 m to conform to EN standards. If a power line of 3 m or longer is required, extend the length at the Switching Power Supply's primary side (i.e., the AC power line). Applicable Countries Wireless standards have been met for the following countries. The product cannot be used in any other countries. Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungry, Iceland, Ireland, Italy, Japan, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, UK, USA FA Wireless SS Terminals WT30 1 Specifications Ratings Item WT30-M01-FLK Serial Master WT30-SID16/SMD16/SMD16-1 I/O Slaves Power supply (wireless communications power supply) Rated voltage 24 V DC Allowable voltage range 20.4 to 26.4 V DC Power consumption 3 W max. (See note 1.) Error output/output power supply (for output circuits) Rated voltage --- 24 V DC Allowable voltage range --- 20.4 to 26.4 V DC Insulation resistance 20 M min. (at 100 V DC) between the power 20 M min. (at 100 V DC) between the power supply and chassis supply and all I/O and I/O power supply and between the power supply and chassis Dielectric strength 1,500 V AC for 1 min between power supply and chassis Noise immunity IEC61000-4-4. 1 kV (power supply line) Vibration resistance (See note 2.) JIS C0040 Frequency: 10 to 55 Hz; Amplitude of 0.35 mm or acceleration of 50 m/s2, whichever is smaller (DIN Rail mounting: single amplitude of 0.1 mm or acceleration of 15 m/s2) 10 sweeps of 8 min each (i.e., 80 min in total) in X, Y, Z directions Shock resistance Conforms to JIS C0041: 300 m/s2 3 times each in X, Y, and Z directions Ambient operating temperature Number of simultaneously ON I/O points -10 to 55C (with no condensation or icing) (with the Terminal mounted with the dust-proof 10 max.: -10 to 55C (with no condensation or label facing up) icing) 16 max.: -10 to 50C (with no condensation or icing) (with the Terminal mounted with the dust-proof label facing up) Ambient operating humidity 25% to 85% (with no condensation or icing) Ambient environment No corrosive gases Storage temperature -25 to 65C (with no condensation or icing) Protective structure 1,500 V AC for 1 min between the power supply and all I/O and I/O power supply and between the power supply and chassis IP20 Terminal construction Power supply and I/O Screwless terminal block (Phoenix Contact FFKDS/V1-5.08 or equivalent) --D-sub, 9-pin (female) Inch screws (OMRON XM2F-0910-132 or equivalent), Master station only Serial Safety standards UL: UL508 (Listing) Weight 330 g max. Note: 1. Provide a power supply of at least 15 W, considering the inrush current generated at startup. 2. Use the WT30-FT003 Surface Mounting Bracket when installing the WT30 in environments subject to vibration. Wireless Interface Specifications Item Specifications Wave type Spread Spectrum (direct sequence; DS-SS) Communication method Simplex Frequency band 2,401 to 2,480.2 MHz Number of channels 67 channels (based on switching) Transmitter output power 10 mW/MHz Baud rate between wireless stations 100 kbps Communications distance (See note.) Indoors: 60 m min. (approx. 50 m min. with Magnet-base Antennas and Flat Diversity Antennas) Outdoors: Approx. 300 m min. (anticipated distances) (without using relay stations) Error detection method CRC-CCITT (16 bits) Relay functions One stage using I/O slave for the serial master configuration. Number of stations per area (See note.) 10 sets max. (recommended) Number of I/O Slaves connected 64 max. Note: Varies according to the installation environment. Package Contents * WT30 FA Wireless SS Terminal * Terminal labels (I/O Slaves only) * Instruction Sheet * Adhesive non-slip feet (Serial Master only) 2 FA Wireless SS Terminals WT30 Nomenclature Serial Master Station Unit No. Switch Set the unit number of the Serial Master Station Unit No. switch Set the unit number of the Serial Master Station. Node setting switch (WNODE) Set the number of connected I/O Slave Stations. Channel setting switch (WCH) Set the communications frequency channel. Antenna terminal (ANT1) Antenna terminal (ANT2) Default: 00 Node Setting Switch (WNODE) Set the number of connected I/O Slave Stations. Set the node number of the Slave Stations being used as I/O Slave Stations. The Slave Station functions as a relay station when the node number is set to 99. Default: 01 Status indicators Received signal strength indicator Special function switch Channel Setting Switch (WCH) Set the communications frequency. Default: 02 Function Setting Switch Serial Master Station No. Mode selection switch Switch between RUN, TEST, and SET mode. Function setting switch Make the detailed settings for RUN/TEST/SET mode. Power supply terminal Supply power to the WT30. 1 RS-232C Terminal Connect the PLC, personal computer, etc. Serial communications setting switch Set the baud rate. I/O terminal status indicators (0 to 7 or 8 to 15) The contact status is displayed. Channel setting switch (WCH) Set the communications frequency. Antenna terminal (ANT1) Antenna terminal (ANT2) OFF functions Clears I/O status data when a communications error occurs. Enable scan list Disable scan list 3 Relays used Relays not used TEST mode Signal strength monitor Signal strength monitor disabled enabled All channels Specified channels automatically switched 6 7 SET mode --- --- Scan list recognition Nothing done 8 Registers specified I/O Registers all I/O slaves slave automatically 9 Recognizes serial numbers Ignores serial numbers --- --- 10 Not used I/O Slave Station Status indicators Received signal strength indicator No. 1 I/O terminals Connect the contact signals. Power supply terminal Supply power to the WT30 and output circuits. Applicable mode RUN mode Holds I/O status data when a communications error occurs. OFF functions Clears I/O status data when a communications error occurs. Input hold Normal mode 3 Input filter: 100 ms Input filter: 10 ms TEST mode Signal strength monitor Signal strength monitor disabled enabled 5 All channels Specified channels automatically switched 6 Installation test function Nothing done --- --- Special function switch Function setting switch Make the detailed settings for RUN/TEST mode. ON functions 2 4 Mode selection switch Switch between RUN, TEST, and SET mode. RUN mode Holds I/O status data when a communications error occurs. 5 Node setting switch (WNODE) Set the unit number of the I/O Slave Station. ON functions 2 4 I/O Slave Station Applicable mode 7 to 10 Not used FA Wireless SS Terminals WT30 3 Serial Communications Setting Switch No. 1 2 Function ON Communications setting Detailed selection settings (settings for No. 2 to 8 used) OFF Default settings (baud rate: 9,600 bps; data length: 7 bits; parity: even; stop bits: 2) Settings for No. 2 to 8 are ignored. Baud rate (bps) 1 (See note.) 2 Total value = 0: 1,200 4 = 1: 2,400 = 2: 4,800 = 3: 9,600 = 4: 19,200 = 5: 38,400 = 6: 57,600 = 7: 115,200 0 5 Data length 8 bits 7 bits 6 Parity None Yes Odd Even 1 bit 2 bits 3 4 7 8 Stop bits 0 0 Display Indicator Color Status PWR Green Lit ERR (Slave Station) Red Meaning (primary error) Power is being supplied. Not lit Power is not being supplied. Lit Error output is ON: Wireless device error or wireless communications error. (See note) Not lit No wireless device error or wireless communications error. COMM Yellow Lit (Master Station) Not lit Serial communications in progress. No serial communications. 0 to 15 (Slave Station) Yellow Lit/Not lit ON/OFF status for input or output signals RSSI Lit/ Receiving Signal Strength Red/ Yellow/ All not lit Indicator monitor: Number of indicators lit (receiving signal Green strength 1 to 9) Receiving signal strength less than 0 to 1. MS Green Lit Communications are normal. (Module Status) Flashing TEST mode or SET mode has been activated. Red Lit Note: For example, if pins number 2, 3, and 4 are all ON, the total is 7, which corresponds to a baud rate of 115,200 bps. A fatal error has occurred that cannot be recovered from. Replace the Unit Flashing A non-fatal error has occurred that can be recovered from by resetting the system. --WS (Wireless Status) Not lit Green Lit Power is not being supplied or the system is resetting. The station has joined the wireless network. Flashing Permission to join wireless network received from Serial Master Station (Slave Station) Red Lit A fatal error has occurred that cannot be recovered from. Flashing Error from which recovery is possible --- Not lit Wireless communications are not in progress. Note: When using the WD30 as the Serial Master Station, the ERR indicator will light if normal I/O communications are not possible due to an error in the host network. 4 FA Wireless SS Terminals WT30 Wiring Serial Master Station (WT30-M01-FLK) D-sub, 9-pin, Female End at WT30 RS-232C Connector 54321 Power supply terminal Supply power to the Unit WT30 9876 Pin No. Signal 1 I/O direction --- --- 2 RD Output 3 SD Input 4 --- --- 5 SG --- 6 --- --- 7 --- --- 8 --- --- 9 --- --- I/O Characteristics I/O Slave Station WT30-SID16 Error output (PNP) Inputs IN V G 24 V DC 0 V 0 8 Power supply 1 9 2 10 3 11 COM COM 4 12 IN Inputs 5 13 6 14 7 15 Inputs COM ERRP G 24 V DC 0 V 0 0 Power supply 1 1 2 2 Outputs 3 3 COM 4 COM 4 OUT 5 5 6 6 Outputs 7 7 20.4 to 26.4 V DC Input impedance 4.7 k (typical) Input current 5 mA (typical) ON voltage/ 17.4 V DC, 3.0 mA min. current characteristics Error output (NPN) Input filter 10 ms/100 ms (Selected using switch.) Input voltage 24 V DC Allowable voltage 20.4 to 26.4 V DC Max. switching current 100 mA max. per output (at 20.4 to 26.4 V DC) Simultaneous usage of error output NPN/PNP is not possible. Leakage current 0.1 mA max. Residual voltage 1.0 V max. Fuse One for every two outputs except for error output circuits, which have one for every NPN/ PNP output. (No fuses can be replaced by the user.) IN V Allowable voltage range COM ERRN Error output (PNP) Inputs Specifications 24 V DC OFF voltage/ 5.0 V DC, 1.0 mA max. current characteristics WT30-SMD16 WT30-SMD-16-1 Error output/output power supply Inputs Input Characteristics Inputs COM ERRP Output/Error Output Characteristics Error output power supply Item Input voltage COM ERRN Error output (NPN) FA Wireless SS Terminals WT30 5 Input Circuit Diagram Output Circuit Diagram (NPN) V OUT 0 Secondary internal circuit Secondary internal circuit IN 0 IN 1 IN 2 OUT 1 Fuse OUT 2 Fuse IN 15 OUT 7 COM (IN) Fuse Error Output Circuit Diagram Output Circuit Diagram (PNP) Fuse Fuse V OUT 0 Secondary internal circuit Secondary internal circuit V Fuse G ERRP ERRN OUT 1 Fuse OUT 2 OUT 3 G OUT 7 G Dimensions Note: All units are in millimeters unless otherwise indicated. Serial Master Station I/O Slave Station WT30-M01-FLK WT30-SID16 WT30-SMD16 WT30-SMD16-1 13.3 105 105 13.3 120 ia. (15) ur, 5d Fo 90 60 40 (15) Surface mounting bracket WT30-FT003 6 FA Wireless SS Terminals WT30 DIN rail mounting bracket WT30-FT001 or WT30-FT002 7.3 With Magnet-base Antenna With Flat Diversity Antenna WT30-AT001 WT30-AT002 With Pencil Antenna WT30-AT003 40 150 (46) (23) (34) (46) R50 R38 20 R40 (32) 4.6 (38) Serial Master Station Surface Mounting Bracket WT30-FT003 I/O Slave Station I/O Slave Station DIN Rail mounting bracket WT30-FT001 or WT30-FT002 DIN Rail mounting bracket WT30-FT001 or WT30-FT002 Magnet-base Antenna Flat Diversity Antenna Pencil Antenna WT30-AT001 WT30-AT002 WT30-AT003 57.5 26 Three, 3 dia. 57.5 52 75 115 10.5 dia. 10.5 dia. 2010 2010 35.8 dia. 39 DIN Rail Mounting Bracket Surface Mounting Bracket Flat Diversity Antenna Mounting Brackets (with magnets) WT30-FT001 WT30-FT002 WT30-FT003 WT30-FT011 FA Wireless SS Terminals WT30 7 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://oeweb.omron.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.omron247.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONICS LLC 1 Commerce Drive Schaumburg, IL 60173 Tel: 847.843.7900 For U.S. technical support or other inquiries: 800.556.6766 OMRON CANADA, INC. 885 Milner Avenue Toronto, Ontario M1B 5V8 Tel: 416.286.6465 MEXICO SALES OFFICES Mexico, D.F. 555.660.3144 Ciudad Juarez 656.623.7083 Monterrey, N.L. 818.377.4281 Queretaro 442.135.4510 BRAZIL SALES OFFICE Sao Paulo 55.11.2101.6310 ARGENTINA SALES OFFICE Cono Sur 54.114.787.1129 CHILE SALES OFFICE Santiago 562.206.4592 OMRON ON-LINE Global www.omron247.com USA www.omron247.com Canada www.omron.ca Brazil www.omron.com.br Latin America www.espanol.omron.com OTHER LATIN AMERICAN SALES Florida 954.227.2121 Cat. No. N139-E1-01.........................3/07............Specifications subject to change without notice..............Printed in USA