Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 217 Series 217 Series, 5 x 20 mm, Fast-acting Fuse RoHS Pb PS E Description 5x20mm fast-acting glass body cartridge fuse designed to IEC specification. Features * Designed to International (IEC ) Standards for use globally * Meets the IEC 60127-2, Sheet 2 specification for fast-acting fuses Agency Approvals Agency PS E * Available in cartridge and axial lead form * RoHS compliant and lead-free Applications Agency File Number Cartridge: NBK090205-E10480A NBK120802-E10480C Leaded: NBK090205-E10480B NBK120802-E10480D Ampere Range 1A - 5A 6.3A - 15A 1A - 5A 6.3A - 15A 2002010207007600 0.032A - 6.3A SU05001-3004 SU05001-2005 SU05001-2006 SU05001-2007 0.032A - 0.040A 0.050A - 0.315A 0.400A - 6.3A 8A - 10A E10480 0.032A - 10A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating 150% 210% 29862 0.032A - 6.3A 1517221 0.032A - 6.3A 40014645 0.032A - 6.3A, 8A*, 10A* 40016647 15A* KM41462 0.040A - 6.3A N/A 0.032A - 15A 275% 400% 1000% *Approval for cartridge versions only Ampere Rating Opening Time 0.032A-0.0100A 60 minutes, Minimum 0.0125A-6.3A 60 minutes, Minimum 8A-15A 30 minutes, Minimum 0.032A-0.0100A 30 minutes, Maximum 0.0125A-6.3A 30 minutes, Maximum 8A-15A 30 minutes, Maximum 0.032A-0.0100A 0.01 sec., Min.; .5 sec. Max. 0.0125A-6.3A 0.05 sec., Min.; 2 sec. Max. 8A-15A 0.05 sec., Min.; 2 sec. Max. 0.032A-0.0100A .003 sec., Min.; 0.1 sec.. Max. 0.0125A-6.3A .01 sec., Min.; 0.3 sec. Max. 8A-15A .01 sec., Min.; 0.4 sec. Max. 0.032A-0.0100A .02 second, Maximum 0.0125A-6.3A .02 second, Maximum 8A-15A .04 second, Maximum Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see `Recommended Accessories' section. (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 02/05/19 Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 217 Series Electrical Characteristic Specifications by Item Nominal Cold Resistance (Ohms) Agency Approvals Amp Rating (A) Voltage Rating (V) .032 0.032 250 262.2000 0.00015 10000 1.6 x x x x x x x .040 0.04 250 183.1500 0.00008 8000 1.6 x x x x x x x .050 0.05 250 15.2000 0.00049 7000 1.6 x x x x x x x .063 0.063 250 10.4500 0.00056 5000 1.6 x x x x x x x .080 0.08 250 7.8900 0.00132 4000 1.6 x x x x x x x .100 0.1 250 5.6965 0.00260 3500 1.6 x x x x x x x .125 0.125 250 3.8200 0.00478 2000 1.6 x x x x x x x .160 0.16 250 2.5250 0.01000 2000 1.6 x x x x x x x .200 0.2 250 1.7000 0.02000 1700 1.6 x x x x x x x .250 0.25 250 1.2325 0.04000 1400 1.6 x x x x x x x .315 0.315 250 0.8800 0.11000 1300 1.6 x x x x x x x .400 0.4 250 0.2770 0.12500 1200 1.6 x x x x x x x x .500 0.5 250 0.2065 0.21500 1000 1.6 x x x x x x x x .630 0.63 250 0.1900 0.41000 650 1.6 x x x x x x x x .800 0.8 250 0.1203 0.85000 240 1.6 x x x x x x x x 001. 1 250 0.0964 1.04500 200 1.6 x x x x x x x x x 1.25 1.25 250 0.0701 2.23000 200 1.6 x x x x x x x x x 01.6 1.6 250 0.0528 4.61500 190 1.6 x x x x x x x x x 002. 2 250 0.0416 5.73000 170 1.6 x x x x x x x x x 02.5 2.5 250 0.0334 9.46000 170 1.6 x x x x x x x x x 3.15 3.15 250 0.0224 17.72000 150 2.5 x x x x x x x x x 004. 4 250 40A @ 250VAC 0.0165 29.16500 130 2.5 x x x x x x x x x 005. 5 250 50A @ 250VAC 0.0137 42.79500 130 2.5 x x x x x x x x x 06.3 6.3 250 63A @ 250VAC 0.0095 62.46500 130 2.5 x x x x x x x x x 008. 8 250 80A @ 250VAC 0.0068 198.16000 130 4 x x x x x* 010. 10 250 100A @ 250VAC 0.0063 217.63500 130 4 x x x x x* 015. 15 250 150A @ 250VAC 0.0040 607.13500 130 4 x x* Interrupting Rating 35A @ 250VAC Nominal Melting 2 I t (A2 sec) Maximum Maximum Voltage Drop Power at Rated Dissipation Current At (mV) 1.5ln(W) Amp Code PS E x * Approval for cartidge versions only. 0.032A 0.040A 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 15A Average Time Current Curves 10000 1000 100 TIME IN SECONDS Temperature Re-rating Curve 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/19 Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 217 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100C Temperature Maximum: Preheat Time: 150C 60-180 seconds Solder Pot Temperature: 260C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (C) - Measured on bottom side of board 300 Solder Iron Temperature: 350C +/- 5C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Material Body: Glass Cap: Nickel-plated brass Leads: Tin-plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Agency approval marks Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel) (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/19 Operating Temperature -55OC to +125OC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles -65C to +125C) Vibration MIL-STD-202, Method 201 Humidity Salt Spray MIL-STD-202, Method 103, Test Condition A. high RH (95%) and elevated temperature (40C) for 240 hours. MIL-STD-202, Method 101, Test Condition B Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 217 Series Dimensions Part Numbering System 20+0.5 0217 000P 0217 xxxx M X E P 5.2+0.1 -0.2 5.1+0.6 Series 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.60.4 21.51.0 401.0 0217.032 XEP to 0217.315 XEP Quantity Code M = 1000 Packaging Code 0.650.05 X = Filler Option Codes 401.0 0217.400 XEP to 0217015 XEP Blank = Cartridge Type Fuse E = Axial Leaded Fuse 5.50.3 21.51.0 Lead-free 0.650.05* All dimensions in mm Notes: * Ratings above 6.3A have 0.80.05 diameter lead. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E N/A N/A N/A 1000 1000 1000 1000 1000 100 MX MXE MRET1 MXG MXB HX N/A N/A T1=53mm (2.087") N/A N/A N/A 217 Series Bulk Bulk Reel and Tape Bulk Bulk Bulk Recommended Accessories Accessory Type Holder Block Clip Max Application Voltage Max Application Amperage Series Description 345_ISF Panel Mount Shock-Safe Fuseholder 10 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK(R) Fuse Block 646 PC Mount Miniature Fuse Block 10 250 6.3 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/19