Catalog 82181 Revised 4-08 tycoelectronics.com 82181-7.5M-LUG-FP-4-08-2-0G3B Soft Shell Pin and Socket Connectors Tyco Electronics Corporation Harrisburg, PA AMP Soft Shell Pin and Socket Connectors Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) At Tyco Electronics, we're ready to support your RoHS requirements. We've assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC, as amended 1 January 2006, that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. Note: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly "Out of Scope" of the RoHS Directive such as hand tools and other non-electrical accessories. Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced at right. AMP Getting the Information You Need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: Cross-Reference from Non-compliant to Compliant Products Ability to browse RoHS Compliant Products in our on-line catalog Downloadable Technical Data Customer Information Presentation More detailed information regarding the definitions used above So whatever your questions when it comes to RoHS, we have the answers at www.tycoelectronics.com/ leadfree RoHS Customer Support Center (c)1977-1980, 1983, 1986, 1988, 1992-1995, 1997, 1998, 2001, 2003, 2006 and 2007 by Tyco Electronics Corporation. All Rights Reserved. 2 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. AMP-DUAC 125 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Universal MATE-N-LOK Universal MATE-N-LOK II .156 MATE-N-LOK 189 203 3-4 2-15 1-15 2-9 1-16 1-15 2-6 2-24 2-24 2-36 2-24 1-24 1-12 3-12 2 2 1-9 2-6 2-24 2-13 No. of Positions (.390) 9.91 (.250) 6.35 (.250) 6.35 (.240) 6.10 (.200) 5.08 (.198) 5.03 (.197) 5.00 (.165) 4.20 (.165) 4.20 (.165) 4.20 (.163) 4.14 (.163) 4.14 (.156) 3.96 (.256) 6.50 (.312) 7.92 (.512) 13.00 (.145) 3.68 (.137) 3.50 (.118) 3.00 (.098) 2.50 Centerline (in) mm 20-10 30-10 30-10 20-10 30-14 14-24 24-16 26-18 26-18 26-18 30-16 30-16 26-16 30-18 26-18 30-20 26-20 Wire Size (AWG) (.185) 4.70 (.200) 5.08 (.200) 5.08 (.180) 4.57 (.130) 3.30 (.180) 4.57 (.122) 3.10 (.130) 3.30 (.094) 2.39 (.115) 2.92 (.126) 3.20 (.126) 3.20 (.122) 3.10 (.110) 2.79 (.106) 2.70 (.060) 1.52 (.071) 1.80 Wire Insulation Dia. Max. (in) mm 32.5 19 19 28 19 13 10 9 9 9 10.5 9.5 14 7 7 5 3 Current Rating Max (A)* 600 VAC 600 VAC or VDC 600 VAC or VDC 600 VAC or VDC 250 VAC 250 VAC or VDC 300 VAC 600 VAC 600 VAC 250 VAC 600 VAC or VDC 600 VAC or VDC 300 VAC (3.96 WTW, 6.5 WTB and 7.92 WTB) 50 VAC (3.96 WTB) 250 VAC or VDC 300 VAC 250 VAC 50 VAC or VDC Voltage Rating Max. -55 to +105 -55 to +105 -55 to +105** -55 to +105 -55 to +105 -55 to +105 -30 to +105 -55 to +105 -40 to +105 -55 to +85 -55 to +105 -55 to +105 -30 to +105 -55 to +105 -30 to +105 -40 to +105 -30 to +105 Operating Temp. Range (C) V-2 V-0 V-0 & V-2 V-2 V-2 V-2 V-0 V-2 V-0 & V-2 V-0 V-0 & V-2 V-0 & V-2 V-0 V-2 V-0 V-0 V-0 UL94 Flammability Rating No No Yes No No No No No No No No Yes No No No No No Sealed Version Available UL UL, CSA, VDE UL, CSA; designed and tested to meet VDE 380 V requirements, except 6 Position Circular UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA, VDE UL, CSA, VDE (250 V Max.) UL, CSA, VDE UL, CSA UL, CSA UL, CSA, VDE UL, CSA, VDE Approvals Introduction *Current Rating is application dependent ** 125C Available .140 MATE-N-LOK Commercial MATE-N-LOK 151 169 .093 Commercial Pin & Socket 143 165 5.0 mm Power Key Connectors (PKC) 135 Standard Density VAL-U-LOK Connector System 119 Mini-Universal MATE-N-LOK 83 MR (Miniature Rectangular) Power Double Lock (PDL) 59 Mini-Universal MATE-N-LOK 2 .062 Commercial Pin & Socket 53 99 Grace Inertia Connectors (GIC) 3.5 49 109 2.5 mm Signal Double Lock (SDL) Micro MATE-N-LOK 3 mm 17 High Density Product Name 9 Page No. AMP Soft Shell Pin and Socket Connectors provide a highly reliable and economic means of grouping multiple-lead connections in today's computer, computer/ peripheral equipment, business machines, entertainment centers, appliances and other sophisticated commercial equipment. The electrical connector is an integral component in these applications. They also offer worldwide application approval because of their reliability and economy. Electrical functions have increased in complexity and new designs continually call for the maximum use of space. The Soft Shell Pin and Socket family of connectors offers the design and features to answer these modern industry requirements. This catalog is organized by contact centerline spacing (High Density and Standard Density) to provide you with the basic information necessary to select the Soft Shell connector system best suited for your specific application. It contains general information to acquaint you with the complete family of connectors and application tooling. Since your specific application will determine the degree of automatic, semiautomatic or manual application tooling required, complete specifications are covered on pages 207-204. Summary Chart Soft Shell Pin and Socket Connectors AMP Table of Contents South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 3 Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) High Density Need more information? Call Technical Support at a local number listed on the inside back cover. Technical Support is staffed with specialists well versed in Tyco Electronics products. 2.5 mm Signal Double Lock (2.5 SDL) Connectors ......................9-16 Product Facts .............................................................................................................9 Performance Characteristics .......................................................................................9 Quick Reference Chart for Mating Part Numbers and Future Product Plans..............10 Mating Configurations (Wire-To-Wire and Wire-To-Board) ......................................11 Contacts and Double Lock Plates .............................................................................12 Plug Housings ..........................................................................................................13 Cap Housings ...........................................................................................................14 Headers, PC Board, Vertical: Standard-Profile .........................................................15 High-Profile................................................................16 Micro MATE-N-LOK 3 mm Connector System ...........................17-47 Product Facts............................................................................................................17 Performance Characteristics................................................................................17-18 Connector Application.........................................................................................19-21 Contacts ...................................................................................................................22 Receptacle Housings...........................................................................................23-24 Plug Housings ....................................................................................................25-28 Low Profile ...............................................................................................................29 Vertical Header Assemblies .................................................................................30-37 Right-Angle Header Assemblies..........................................................................38-47 Grace Inertia Connectors (GIC), 3.5 ......................................49-52 Product Facts ...........................................................................................................49 Performance Characteristics .....................................................................................49 Contacts and Double Lock Plates .............................................................................50 Housings: Plug and Cap .....................................................................................51-52 .062 [1.57] Commercial Pin and Socket Connectors ..................53-57 Product Facts............................................................................................................53 Performance Characteristics................................................................................53-54 Contacts ...................................................................................................................55 Housings: Free-Hanging or Panel Mount...........................................................56-57 Recommended Panel Cutouts.................................................................57 ISO900e1d i rtif Ce Produced under a Quality Management System certified to ISO 9001 ACTION PIN, AMP, AMP-DUAC, AMP-O-LECTRIC, AMPOMATOR, AMP-O-MATIC, CERTI-CRIMP, FASTON, MATE-N-LOK, PRO-CRIMPER, TE Logo and Tyco Electronics and VAL-U-LOK are trademarks. Kapton is a trademark of E.I. du Pont de Nemours and Company. Power Double Lock (PDL) Connectors ....................................59-81 Product Facts ...........................................................................................................59 Performance Characteristics .....................................................................................59 Quick Reference Chart for Mating Part Numbers.......................................................60 Contacts ...................................................................................................................61 Housings: Free-Hanging Plug (3.96 mm centerline) ..........................................62-64 Free-Hanging Cap (3.96 mm centerline) ...........................................65-66 Panel Mount Cap (3.96 mm centerline).............................................67-70 Double Lock Plates (3.96 mm centerline) .................................................................71 Tab Headers, PC Board, Vertical: 3.96 mm centerline.........................................72-73 7.92 mm centerline ..............................................74 Housings: Free-Hanging Plug (6.5 mm centerline) ............................................75-76 Double Lock Plates (6.5 mm centerline) ...................................................................77 Housings: Panel Mount Cap (6.5 mm centerline) ....................................................78 Tab Headers, PC Board, Vertical: 6.5 and 13 mm centerlines .............................79-81 MOLEX Mini-Fit and Mini-Fit Jr. are trademarks of Molex, Incorporated. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 4 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) Mini-Universal MATE-N-LOK Connectors ................................83-94 Product Facts............................................................................................................83 Performance Characteristics................................................................................83-84 Mating Combinations ...............................................................................................85 Contacts, Keying Plug, Wire Seal and Test Probe Contact .......................................86 Housings: Free-Hanging or Panel Mount...........................................................87-88 Hermaphroditic Free-Hanging ................................................................89 Headers, PC Board: Vertical Pin and Blindmate .................................................90-91 Right-Angle Pin .......................................................................92 Recommended PC Board Hole Layouts ...................................93 Plug or Cap Housing Strain Reliefs ..........................................................................94 High Density (Continued) Mini-Universal MATE-N-LOK Sealed Connectors .......................95-97 Product Facts............................................................................................................95 Performance Characteristics .....................................................................................95 Plug or Cap Housing................................................................................................96 Individual Wire Seals................................................................................................96 Gang Seals and Contacts..........................................................................................97 Mini-Universal MATE-N-LOK 2 Connectors.............................99-107 Product Facts............................................................................................................99 Performance Characteristics..............................................................................99-100 Contacts and Keying Plug ......................................................................................101 Housings: Free-Hanging .................................................................................101-102 Headers, PC Board: Vertical Pin and Blindmate .............................................103-104 Right-Angle Pin .....................................................................105 Recommended PC Board Hole Layouts .................................106 Mating Combinations .............................................................................................107 (MR) Miniature Rectangular Connectors..............................109-118 Product Facts..........................................................................................................109 Performance Characteristics............................................................................109-110 Mating Combinations .............................................................................................111 Contacts and Keying Plug ......................................................................................112 Housings: Free-Hanging or Panel Mount.......................................................113-114 Recommended Panel Cutouts...............................................................115 Strain Reliefs, Adapting Grommets and Commoning Bars ...................116 Headers, PC Board: Vertical Pin.....................................................................117-118 Recommended PC Board Hole Layouts..........................117-118 VAL-U-LOK Connector System ..........................................119-124 Product Facts .........................................................................................................119 Performance Characteristics ...................................................................................119 Contacts .................................................................................................................120 Housings (Single Row): Panel Mount Plug............................................................121 Free-Hanging Plug ..........................................................121 Receptacle .......................................................................121 Housings (Double Row): Panel Mount Plug ..........................................................122 Free-Hanging Plug .........................................................122 Colored ..........................................................................122 Receptacle ......................................................................122 Pin Headers, PC Board: Vertical and Right-Angle ..................................................123 Blind Mate Headers ................................................................................................124 AMP-DUAC Connectors...................................................125-133 Product Facts .........................................................................................................125 Performance Characteristics ...................................................................................125 Receptacle Housings and Female Contacts.............................................................126 Plug Housings and Male Contacts..........................................................................127 Headers, PC Board: Vertical ...........................................................................128-133 Right-Angle............................................................................133 Strain Relief, 6 Position (for Receptacle or Plug Housing)......................................127 5 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) Standard Density 5.0 mm Power Key Connectors (5.0 PKC).............................135-141 Product Facts .........................................................................................................135 Performance Characteristics ...................................................................................135 Quick Reference Chart for Mating Part Numbers.....................................................136 Contacts and Double Lock Plates ...........................................................................137 Plug Housings: 1 Row ...........................................................................................138 2 Row ...........................................................................................139 Headers, PC Board, Vertical: 1 Row .......................................................................140 2 Row .......................................................................141 .093 [2.36] Commercial Pin and Socket Connectors ...............143-149 Product Facts..........................................................................................................143 Performance Characteristics............................................................................143-144 Contacts .................................................................................................................145 Housings: Free-Hanging or Panel Mount.......................................................146-149 Commercial MATE-N-LOK Connectors.................................151-164 Product Facts..........................................................................................................151 Performance Characteristics............................................................................151-152 Mating Combinations......................................................................................153-154 Contacts, Commoning Tabs and Keying Plug .................................................155-156 Housings: Free-Hanging........................................................................................157 Positive Lock ........................................................................................158 Panel Mount .........................................................................................159 Flange Mount and Motor Mount...........................................................160 Headers, PC Board: Vertical Pin ............................................................................161 Surface Mount Right-Angle Pin and Vertical Socket..............162 Right-Angle Pin .....................................................................163 Insulation Displacement Connectors (IDC) and Dust Covers .................................163 Right-Angle Pin Headers with Fix Belt....................................................................164 .140 MATE-N-LOK Connectors ..........................................165-167 Product Facts..........................................................................................................165 Performance Characteristics ...................................................................................165 Contacts .................................................................................................................166 Housings: Free-Hanging........................................................................................166 Panel Mount .........................................................................................167 6 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) Standard Density Universal MATE-N-LOK Connectors ....................................169-185 Product Facts..........................................................................................................169 Performance Characteristics............................................................................169-170 Mating Combinations .............................................................................................171 Contacts ..........................................................................................................172-173 Housings: Free-Hanging or Panel Mount ..............................................................174 Cap Housing Panel Cutouts, Keying Plugs and Plug Housing Strain Reliefs..............................................................175 Plug or Cap Housing Strain Reliefs and Cap Housing Adapters...........176 Flanged Cap Housings with Twist and Lock Feature.............................177 Sealed Bulkhead Connectors...........................................................................178-179 Splash-Proof Seals.................................................................................................180 Contacts (used with Splash-Proof Seals) ...............................................................181 Headers, PC Board: Vertical Pin ............................................................................182 Vertical Socket .......................................................................183 Recommended PC Board Hole Layouts .................................184 PC Board Vertical Pin Headers with ACTION PIN Contacts ......184 Right-Angle Pin and Socket...................................................185 Test Connectors ......................................................................................................185 Circular Connectors ........................................................................................186-188 Universal MATE-N-LOK Connectors -- Available in Colors ..................................188 (Continued) Universal MATE-N-LOK II Connectors .................................189-202 Product Facts..........................................................................................................189 Performance Characteristics............................................................................189-190 Mating Combinations .............................................................................................191 Contacts .................................................................................................................192 Housing Kits: Free-Hanging or Panel Mount .................................................193-194 Housing Components: Free-Hanging or Panel Mount ....................195 Plug or Cap Housing Strain Reliefs and Keying Plug......................196 Headers, PC Board: Vertical Pin ............................................................................197 Vertical Socket .......................................................................198 Recommended PC Board Hole Layouts .................................199 PC Board Vertical Pin Headers with ACTION PIN Contacts ......199 Right-Angle Pin and Socket...................................................200 High Current Contacts ............................................................................................201 High Current Vertical Pin Headers..........................................................................202 .156 MATE-N-LOK Connectors ..........................................203-204 Product Facts..........................................................................................................203 Contacts ................................................................................................................203 Housings: Free-Hanging........................................................................................204 Panel Mount .........................................................................................204 Technical Documents ......................................................................................205-206 Application Tooling .........................................................................................207-210 Applicator Options ..........................................................................................211-213 Product Feature Comparisons.........................................................................214-215 Non-Compliant to RoHS Compliant Part Number Cross Reference ................216-220 Part Number Index ..........................................................................................221-226 Tooling Part Number Index .....................................................................................227 Global Contacts ......................................................................................................229 7 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Engineering Notes 8 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) Product Facts Connector for signal circuits with one row of contacts on 2.5 mm centerline Wire-to-board and wire-towire connectors, consisting of plug and cap housings for wire termination and PC board-mount post headers Mounted to plug and cap housings for wire application, double lock plate provides for positive loading of contacts in the housing. It also helps contacts mate completely Double lock plate is contained within the plug and cap housing completely, which provides neat overall appearance Accepts 26-20 AWG wire (e.g. UL 1007, 1061, 1571, etc.) with insulation diameters of up to 1.8 mm PC board-mount post header is available in two styles: standard profile and high profile High-profile post header has locking feature at location fit to resin coating, which is applied onto the board for waterproof protection as in home appliances. It does not hamper mating and locking of post header with plug housing Locking structure is innerlock type and has a clean surface Solder tail section of post header is provided with kinks to retain the header firmly on PC board during soldering Radial tape-mounted version of post header is also available that is applicable to radial mounting machines Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 VDE Approved, File No. B 04 11 39175013 2.5 mm Signal Double Lock .098 [2.50] Centerline R 2.5 mm Signal Double Lock Connectors (2.5 SDL) are 2.5 mm centerline, compact, one-row connectors for signal circuits. With contacts on 2.5 mm centerline, both wire-to-wire and wire-to-board connectors are available. The connectors consist of plug and cap housings for wire termination, double lock plates for plug and cap housings, crimp snap-in contacts, and a PC boardmount post header. A double lock plate is available for both plug and wire-towire cap housing to provide for positive loading. It helps prevent contacts from coming off or mating halfway. The plate is contained within the plug and cap housing completely. The plug and cap housing can be used without a double lock plate. R The connector accepts 2620 AWG wire (e.g. UL 1007, 1061, 1571, etc.) with insu- lation diameters of up to 1.8 mm. The PC board-mount post header is available in two styles: standard profile and high profile. The high-profile type connectors can be used for home appliances, which require waterproof protection. It does not hamper mating and locking of the post header with the plug housing, even if the board has resin coating on it. The locking structure is inner-lock type and has a clean surface. The solder tail of the loosepiece post header has kinks to secure the connector on the PC board until it is soldered. Radial tape-mounted version of post header is also available and this is applicable to radial mounting machines. Performance Characteristics Voltage Rating--50 VAC/DC Current Rating--3 A Overall Resistance-- 10 m max. (initial) 20 m max. (final) Insulation Resistance-- 500 (500 VDC) Dielectric Withstanding Voltage-- 1,100 VAC, one minute Contact Resistance--20 m max. Operating Temperature-- -30~ + 105C (The upper limit includes temperature rise from power carrying) Applicable Wire--26-20 AWG (UL 1007, 1061, 1571) Wire Insulation Range-- 0.93~ 1.8 mm PC Board Thickness--1.6 mm Technical Documents Product Specification 108-5459 Application Specification 114-5203 Note: Dimensions shown are metric. 9 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Quick Reference Chart for Mating Part Numbers 2.5 mm Signal Double Lock .098 [2.50] Centerline 2 3 4 5 6 7 8 9 10 11 12 13 Mating Connectors (PC Board Mount & Wire Side) Plug Connector Part No. (Wire Side) No. of Pos. Housing Double Lock Plate 917686-1 917687-1 917688-1 917689-1 917690-1 917691-1 917692-1 917693-1 917694-1 917695-1 917696-1 917697-1 917698-1 917699-1 917700-1 917701-1 917702-1 917703-1 917704-1 917705-1 917706-1 917707-1 917708-1 917709-1 Post Header Part No. Standard-Profile Type* 917780-1 917781-1 917782-1 917783-1 917784-1 917785-1 917786-1 917787-1 917788-1 917789-1 917790-1 917791-1 Cap Connector Part No. High-Profile Type 917722-1 917723-1 917724-1 917725-1 917726-1 917727-1 917728-1 917729-1 917730-1 917731-1 917732-1 917733-1 Cap Housing 316086-1 316087-1 316088-1 316089-1 316090-1 316091-1 316092-1 ---- 316094-1 ---- ---- ---- Double Lock Plate 917698-1 917699-1 917700-1 917701-1 917702-1 917703-1 917704-1 917705-1 917706-1 917707-1 917708-1 917709-1 *Included in Standard-Profile Post Header line are Radial Tape-Mounted version (2 to 8 positions). Refer to appropriate description in the catalog. Note: All part numbers are RoHS Compliant. Product Family List (Including Production Plans) Number of Positions Description 2 3 4 5 6 7 8 9 10 11 12 13 Loose Piece Radial Tape-Mounted Loose Piece Radial Tape-Mounted Cap Housing Double Lock Plate Horizontal Board Mount Post Header Horizontal Mount Post Header (Radial Tape-Mounted) Plug Housing Standard-Profile Type Vertical Board Mount Post Header High-Profile Type Note: indicates products currently available; indicates products planned for production. Note: Dimensions shown are metric. 10 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Mating Configurations Wire-to-Wire Connections 2.5 mm Signal Double Lock .098 [2.50] Centerline Wire-to-PC Board Connections Standard-Profile Type High-Profile Type Note: Dimensions shown are metric. 11 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Contacts Material and Finish 2.5 mm Signal Double Lock .098 [2.50] Centerline Pre-tinned phosphor bronze (0.2 mm thick) Receptacle for Plug Housing, Tab for Cap Housing Tab Receptacle Contact Part Number Wire Range AWG mm2 26-22 22-20 0.12~0.35 0.30~0.53 Wire Ins. Dia. 0.93~1.50 1.40~1.80 Tab Strip Form 917765-1 917764-1 Applicator Part Number Receptacle Loose Piece 316399-1 316398-1 Strip Form 917684-1 917683-1 Loose Piece 316401-1 316400-1 * * Hand Tool Part No.: for 26-22 AWG = 234604-1 (Instruction Sheet 411-5736) 22-20 AWG = 234603-1 (Instruction Sheet 411-5735) Extraction Tool Part No.: 234605-1 (Instruction Sheet 411-5737) * Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Number. 2 Pos. 3 to 13 Pos. Double Lock Plates Material UL94V-0, 6/6 Nylon, glass filled, natural color No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 Dimensions of Double Lock Plate A 06.5 09.0 11.5 14.0 16.5 19.0 21.5 24.0 26.5 29.0 31.5 34.0 B 04.3 06.8 09.3 11.8 14.3 16.8 19.3 21.8 24.3 26.8 29.3 31.8 Double Lock Plate Part Number 917698-1 917699-1 917700-1 917701-1 917702-1 917703-1 917704-1 917705-1 917706-1 917707-1 917708-1 917709-1 Applicable Housing Part Number Plug 917686-1 917687-1 917688-1 917689-1 917690-1 917691-1 917692-1 917693-1 917694-1 917695-1 917696-1 917697-1 Cap 316086-1 316087-1 316088-1 316089-1 316090-1 316091-1 316092-1 ---- 316094-1 ---- ---- ---- Extraction Tool Part No. for Double Lock Plate: 234605-1 (Instruction Sheet 411-5737) Note: All part numbers are RoHS Compliant. Note: Dimensions shown are metric. 12 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Plug Housings (For Receptacle Contacts) 2 to 13 Positions 2.5 mm Signal Double Lock .098 [2.50] Centerline Material UL94V-0, 6/6 Nylon, color (see chart) Related Product Data Receptacle Contact Part No. 917684-1 (26-22 AWG) 917683-1 (22-20 AWG) Double Lock Plate--page 12 Mating Cap Housings--page 14 Mating Post Headers--pages 15-16 No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 Dimensions Plug Housing Part Number A B C 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 06.1 08.6 11.1 13.6 16.1 18.6 21.1 23.6 26.1 28.6 31.1 33.6 Natural 917686-1 917687-1 917688-1 917689-1 917690-1 917691-1 917692-1 917693-1 917694-1 917695-1 917696-1 917697-1 Red 917686-2 917687-2 917688-2 917689-2 917690-2 917691-2 ---- 917693-2 ---- ---- 917696-2 917697-2 Yellow 917686-4 917687-4 917688-4 ---- 917690-4 917691-4 ---- 917693-4 917694-4 ---- ---- ---- Green 917686-5 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- Blue 917686-6 917687-6 ---- 917689-6 917690-6 ---- 917692-6 ---- ---- ---- ---- ---- Black 917686-9 917687-9 917688-9 ---- 917690-9 917691-9 ---- ---- ---- ---- ---- ---- Note: All part numbers are RoHS Compliant. 13 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Wire) Cap Housings (For Tab Contacts) 2.5 mm Signal Double Lock .098 [2.50] Centerline 2 to 10 Positions Material UL94V-0, 6/6 Nylon, color (see chart) Related Product Data Tab Contact Part No. 917765-1 (26-22 AWG) 917764-1 (22-20 AWG) Double Lock Plate--page 12 Mating Plug Housings-- page 13 Section X-X Section X-X No. of Pos. 2 3 4 5 6 7 8 10 Cap Housing Part Number Dimensions A 02.5 05.0 07.5 10.0 12.5 15.0 17.5 22.5 B 08.1 10.6 13.1 15.6 18.1 20.6 23.1 28.1 Natural 316086-1 316087-1 316088-1 316089-1 316090-1 316091-1 316092-1 316094-1 Red 316086-2 ---- 316088-2 316089-2 ---- ---- ---- ---- Yellow 316086-4 316087-4 306088-4 ---- ---- ---- ---- 316094-4 Blue 316086-6 ---- ---- ---- ---- ---- ---- ---- Black 316086-9 316087-9 316088-9 ---- ---- 316091-9 ---- ---- Note: All part numbers are RoHS Compliant. Note: Dimensions shown are metric. 14 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Wire) (Continued) Vertical Post Headers (For PC Board Mount) Standard-Profile Type 2.5 mm Signal Double Lock .098 [2.50] Centerline 2 Pos. Material and Finish Header Housings UL94V-0, 6/6 Nylon, glass filled, color (see chart) Post Contact Pre-tinned copper alloy 3 to 13 Pos. Designs of 5 pos. to 8 pos. header housings are slightly different, please request the drawings. Related Product Data Mating Plug Housings-- page 13 Section X-X Section X-X No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 Post Header Part Number Dimensions A 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 B 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 Loose Piece Natural -917780-1*1 -917781-1*1 -917782-1*1 -917783-1*1 -917784-1*1 -917785-1*1 -917786-1*1 -917787-1*1 -917788-1*1 -917789-1*1 -917790-1*1 -917791-1*1 Red -917780-2*1 -917781-2*1 -917782-2*1 -917783-2*1 -917784-2*1 -917785-2 ---- -917787-2 ---- ---- -917790-2 -917791-2 Radial Tape-Mounted Yellow Blue Black ---- ---- -917780-9*1 ---- ---- -917781-9*1 -917782-4*1 ---- -917782-9*1 ---- -917783-6 ---- ---- ---- -917784-9*1 -917785-4*1 ---- ---- ---- -917786-6* ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- *1 Leave the blank, meaning it is with the boss. Enter 2 meaning it is without the boss. *2 Leave the blank, meaning it is with the boss and the kink. Enter 1 meaning it is without the boss and the kink. Enter 2 meaning it is with the boss and with the kink. Note: All part numbers are RoHS Compliant. *3 *4 *5 *6 Natural Red -917894-1*3 ---- -917895-1*4 -917895-2 -917896-1 ---- -917897-1 -917897-2 -917898-1 ---- -917899-1*5 3-917899-2*6 -917900-1 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- Yellow ---- ---- ---- ---- ---- -917899-4 ---- ---- ---- ---- ---- ---- (Qty.) (900) (900) (450) (450) (450) (450) (450) The blue housing 917894-6 is also available. The blue housing 917895-6 and the black housing 917895-9 are also available. Leave the blank, meaning it is without the boss. Enter 3 meaning it is with the boss. It is without the boss. Note: Dimensions shown are metric. 15 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Wire) (Continued) Vertical Post Headers (For PC Board Mount) High-Profile Type Related Product Data Mating Plug Housings--page 13 2.5 mm Signal Double Lock .098 [2.50] Centerline Material and Finish 3 to 13 Pos. Header Housing--UL94V-0, 6/6 Nylon, glass filled, color (see chart) Post Contact--Pre-tinned copper alloy Designs of 5 pos. to 8 pos. header housings are slightly different, please request the drawings. 2 Pos. Section X-X Section X-X Note: Dimensions shown are metric. No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 Post Header Part Number Dimensions Radial TapeMounted Loose Piece A B Natural Red 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 -917722-1*1 -917723-1*1 -917724-1*1 -917725-1*1 -917726-1*1 -917727-1*1 -917728-1*1 -917729-1*1 -917730-1*1 -917731-1*1 -917732-1*1 -917733-1*1 -917722-2*1 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- Yellow Green -917722-4*1 -917722-5*1 ---- ---- ---- ---- ---- ---- -917726-4*1 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- Blue Black -917722-6*1 ---- ---- ---- -917726-6*1 ---- ---- ---- ---- ---- ---- ---- -917722-9*1 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- Natural 316221-1 316222-1 316223-1 316224-1 316225-1 316226-1 316227-1 ---- ---- ---- ---- ---- (Qty.) (900)*2 (900) (450) (450) (450) (450) (450) *1 Leave the blank, meaning it is with the boss. Enter 2 meaning it is without the boss. *2 The red housing 316221-2 and the yellow housing 316221-4 and the green housing 316221-5 and the blue housing 316221-6 and the black housing 316221-9 are also available. 16 Note: All part numbers are RoHS Compliant. Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System High Density Product Facts Wire-to-wire and wire-toboard pin and receptacle connector system Contacts are on 3 mm [.118] centerline spacing 2-12 contact positions - single row 2-24 contact positions - dual row Panel mount or free-hanging wire-to-wire configurations Dual beam contact design for reliable interconnection Contacts accept 24-20 [0.2-0.6] and 30-26 [0.05-0.15] AWG wire with insulation diameter of .060 [1.52] maximum Contacts available in strip form or loose piece Pcb mount pin header assemblies in both vertical and right-angle styles Surface mount or throughhole pcb pin header attachment Pcb headers are IR reflow process compatible Recognized under the Component Program (R) of Underwriters US Laboratories Inc. C to US and Canadian Standards, File No. E28476 Passed Tests for VDE under Registration Number 40005280/Continuous Surveillance Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline The Micro MATE-N-LOK 3 mm Connector System is a wire-to-wire and wire-toboard connector system with contacts on a 3 mm [.118] centerline. Both single-row and dual-row configurations are available. Crimp, snap-in pin and receptacle contacts are used to terminate 24-20 [0.2-0.6] and 30-26 [0.050.15] AWG wire. Plug and receptacle housings allow wire-to-wire and wire-topanel configurations. Header assemblies for wireto-board interconnections include vertical and rightangle components. These IR reflow process compatible headers are available in through-hole and surface mount configurations. Technical Documents Application Specification 114-13000 Micro MATE-N-LOK Connectors Product Specification 108-1836 3 mm Micro MATE-N-LOK Connector Typical uses of the Micro MATE-N-LOK 3 mm Connector System include the appliance, instrumentation, industrial machinery, home equipment, and security system industries. Performance Characteristics Voltage Rating--250 vac Current Rating--5 amp max. on 20 AWG wire Contact Resistance--20 milliohms max. final Dielectric Withstanding Voltage-- 1500 VAC Insulation Resistance--1000 megohms min. Operating Temperature-- -40C to +105C Mating Force--1.5lb [6.67N] max per contact 17 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Connector Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21 Crimp, Snap-In Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Receptacle Housings Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Dual Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Plug Housings Single Row, Free-Hanging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Single Row, Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Dual Row, Free-Hanging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Dual Row, Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Vertical Header Assemblies Low Profile Receptacle Housings, Right Angle Surface Mount Housings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Single Row, Through-Hole, with Retention Feature on Soldertail and Polarization Feature to PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Single Row, Through-Hole, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . 31 Single Row, Surface Mount, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . 32 Single Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . 33 Dual Row, Through-Hole, with Retention Feature on Soldertail . . . . . . . . . . . . . . . . . . . . . 34 Dual Row, Through-Hole, with Retention Feature on Soldertail and Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Dual Row, Surface Mount, with Metal Through-Hole Hold-down. . . . . . . . . . . . . . . . . . . . 36 Dual Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . . . 37 Right-Angle Header Assemblies Single Row, Through-Hole, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . 38 Single Row, Through-Hole, with Plastic Boardlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Single Row, Surface Mount, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . 40 Single Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . 41 Single Row, Surface Mount, with Plastic Boardlock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Dual Row, Through-Hole, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . . 43 Dual Row, Through-Hole, with Plastic Boardlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Dual Row, Surface Mount, with Metal Through-Hole Hold-down. . . . . . . . . . . . . . . . . . . . 45 Dual Row, Surface Mount, with Plastic Boardlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Dual Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . . . 47 Current Rating Verification for 30C Maximum Temperature Rise 100% Energized 7 6 5 Number of Circuit Positions 4 2 to 6 8 to 20 22 to 24 3 2 Multiplication Factor Wire Size (AWG) 28 20 0.40 1 0.40 0.85 0.36 0.85 1 0 0 10 20 40 60 70 30 50 80 Ambient Temperature - Centigrade 90 100 110 Maximum Operating Temperature To determine acceptable current carrying capacity for connector size and wire gage indicated, use the Multiplication Factor from the chart above and multiply it times the Base rated Current at the maximum ambient operating temperature shown in the current rating figure. 18 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) Receptacle Contact High Density Connector Application -- Wire-to-Wire and Wire-to-Panel Plug Housing Contact Housing Single Row Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Free-Hanging -1445049- Page 25 -794606- , -794607- , , -794611- -794610- Page 22 -1445022- Page 23 -794608- , -794609- , , -794613- -794612- Page 22 Panel Mount -1445048- Page 26 Dual Row Receptacle Contact Plug Housing Contact Housing Free-Hanging -794616- Page 27 -794606- , -794607- , , -794611- -794610- Page 22 -794617- Page 24 -794608- , -794609- , , -794613- -794612- Page 22 Panel Mount -794615- Page 28 19 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Connector Application -- Wire-to-PCB Header Receptacle Contact Housing Single Row Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Vertical Through-Hole, with Retention Feature on Soldertail and Polarization Feature to PCB -1445050- , -1445084- , -1445093- (Page 30) Vertical Through-Hole, with Metal Through-Hole Hold-down -1445051- , -1445085- , -1445094- (Page 31) , -794607- , -794606- , -794611- -794610- (Page 22) -1445022- (Page 23) Vertical Surface Mount, with Metal Through-Hole Hold-down -1445052- , -1445086- , -1445095- (Page 32) Vertical Surface Mount, with Surface Mount Hold-down -1445053- , -1445087- , -1445096- (Page 33) Right-angle, Through-Hole, with Metal Through-Hole Hold-down -1445054- , -1445088- , -1445097- (Page 38) Right-angle, Through-Hole, with Plastic Boardlock -1445055- , -1445089- , -1445098- (Page 39) Low Profile, Single Row Right-angle, Surface Mount, with Metal Through-Hole Hold-down -1445056- , -1445090- , -1445099- (Page 40) , -794607- , -2029047- , -2029102- , -794606- , -794611- -2029030- , -2029104- , -794610- (Page 29) (Page 29) Right-angle, Surface Mount, with Surface Mount Hold-down -1445057- , -1445091- , -1445100- (Page 41) Right-angle, Surface Mount, and Plastic Boardlock -1445058- , -1445092- , -1445101- (Page 42) Low Profile, Single Row -2029030- , -2029102- (Page 29) 20 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) Receptacle Contact High Density Connector Application -- Wire-to-PCB Header Housing Dual Row Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Vertical Through-Hole, with Retention Feature on Soldertail and Optional Metal Through-Hole Hold-down -794630- , -794631- , -794632- , (Page 34) -794680- , -794681- , -794682- (Page 35) Vertical Surface Mount, with Metal Through-Hole Hold-down -794633- , -794634- , -794635- (Page 36) Vertical Surface Mount, with Surface Mount Hold-down -794636- , -794637- , -794638- (Page 37) -794606- , -794607- , -794610- , -794611- (Page 22} -794617- (Page 24) Right-angle, Through-Hole, with Metal Through-Hole Hold-down -794677- , -794678- , -794679- (Page 43) Right-angle, Through-Hole, with Plastic Boardlock -794618- , -794619- , -794620- (Page 44) Right-angle, Surface Mount, with Metal Through-Hole Hold-down -794624- , -794625- , -794626- (Page 45) Right-angle, Surface Mount, with Plastic Boardlock -794621- , -794622- , -794623- (Page 46) Right-angle, Surface Mount, with Surface Mount Hold-down -794627- , -794628- , -794629- (Page 47) 21 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Crimp, Snap-In Contacts Material and Finish Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Receptacle -- Phosphor Bronze Plug -- Brass Plating A -- .000100 (.000254) minimum bright tin entire stock over .000050 (.000127) minimum nickel entire stock Plating B -- .000015 (.000038) minimum gold in localized gold plate area. .000100 (.000254) minimum bright tin in localized tin plate area, both over .000050 (.000127) minimum nickel on entire stock Plating C -- .000030 (.000076) minimum gold in localized gold plate area. .000100 (.000254) minimum bright tin in localized tin plate area, both over .000050 (.000127) minimum nickel on entire stock Related Product Data Connectors used with: Receptacle Contacts used with Receptacle Housings -- pages 23-24 Plug Contacts used with Plug Housings -- pages 25-28 Application Tooling-- pages 207-210 .489 [12.17] Ref. Receptacle Contacts Wire Size Range AWG [mm2] Ins. Dia. Range 20-24 0.50 - 0.20 .035 - .060 0.89-1.52 26-30 0.12 - 0.05 .035 - .060 0.89-1.52 Finish Plating A Plating B Plating C Plating A Plating B Plating C Contact Part Numbers Strip Loose Form Piece 794606-1 794610-1 1-794606-1 1-794610-1 1-794606-2 1-794610-2 794607-1 794611-1 1-794607-1 1-794611-1 1-794607-2 1-794611-2 Tooling Part Numbers Applicator Hand Tool * 680893- 91501-1 * 680894- 91502-1 *1=AMPOMATOR CLS Machine, 2=AMP-O-LECTRIC Model K Terminator, 3=AMP-O-LECTRIC Model G Terminator Note: All part numbers are RoHS Compliant. .541 [13.73] Ref. Plug Contacts Wire Size Range AWG [mm2] Ins. Dia. Range 20-24 0.50 - 0.20 .035 - .060 0.89-1.52 26-30 0.12 -0.05 .035 - .060 0.89-1.52 Contact Extraction Tools Part Number 843996-6 for Receptacle Contacts Part Number 1586344-1 for Plug Contacts Finish Plating A Plating B Plating C Plating A Plating B Plating C Contact Part Numbers Strip Loose Form Piece 1-794608-0 1-794612-0 1-794608-1 1-794612-1 1-794608-2 1-794612-2 1-794609-0 1-794613-0 1-794609-1 1-794613-1 1-794609-2 1-794613-2 Tooling Part Numbers Applicator Hand Tool * 1385194- 91501-1 * 1385377- 91502-1 *1=AMPOMATOR CLS Machine, 2=AMP-O-LECTRIC Model K Terminator, 3=AMP-O-LECTRIC Model G Terminator Note: All part numbers are RoHS Compliant. 22 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density Receptacle Housings Single Row Material Related Product Data Contacts: Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating--UL 94V-0 .553 [14.04] Receptacle Contacts--page 22 Mateable Housings and Headers: .118 [3.00] Typ. Single Row Plug Housings-- pages 25-26 Single Row Vertical Pin Header Assemblies--pages 30-37 Single Row Right-Angle Pin Header Assemblies--pages 38-47 .342 [8.70] .152 [3.86] .251 [6.37] A Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimension A .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 Part Numbers 1445022-2 1445022-3 1445022-4 1445022-5 1445022-6 1445022-7 1445022-8 1445022-9 1-1445022-0 1-1445022-1 1-1445022-2 Note: All part numbers are RoHS Compliant. 23 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Receptacle Housings (Continued) Dual Row Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating--UL 94V-0 Related Product Data Contacts: .553 [14.04] Receptacle Contacts--page 22 Mateable Housings and Headers: .118 [3.00] Typ. Dual Row Plug Housings--pages 27-28 Dual Row Vertical Pin Header Assemblies--pages 34-37 Dual Row Right-Angle Pin Header Assemblies--pages 43-47 .118 [3.00] .461 .270 [11.70] [6.86] .251 [6.37] A Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 Dimension A .157 4.00 .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 Part Numbers 794617-2 794617-4 794617-6 794617-8 1-794617-0 1-794617-2 1-794617-4 1-794617-6 1-794617-8 2-794617-0 2-794617-2 2-794617-4 Note: All part numbers are RoHS Compliant. 24 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density Plug Housings Single Row, Free-Hanging Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating--UL 94V-0 Related Product Data Contacts: Plug Contacts--page 22 .118 [3.00]Typ. Mateable Housings: Single Row Receptacle Housings-- page 23 .152 [3.86] .335 [8.50] A .665 [16.89] Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimension A .270 6.85 .388 9.85 .506 12.85 .624 15.85 .742 18.85 .860 21.85 .978 24.85 1.096 27.85 1.215 30.85 1.333 33.85 1.451 36.85 Part Numbers 1445049-2 1445049-3 1445049-4 1445049-5 1445049-6 1445049-7 1445049-8 1445049-9 1-1445049-0 1-1445049-1 1-1445049-2 Note: All part numbers are RoHS Compliant. 25 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Plug Housings (Continued) Single Row, Panel Mount .125 [3.18] .120 [3.05] Material .166 [4.21] .217 [5.51] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating--UL 94V-0 Related Product Data Contacts: B Plug Contacts--page 22 C Recommended Panel Cutout* Mateable Housings: Single Row Receptacle Housings-- page 23 .118 [3.00] Ref. .152 [3.86] .335 [8.50] A .665 [16.89] Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 A .270 6.85 .388 9.85 .506 12.85 .624 15.85 .742 18.85 .860 21.85 .978 24.85 1.096 27.85 1.215 30.85 1.333 33.85 1.451 36.85 Dimensions B .283 7.20 .402 10.20 .520 13.20 .638 16.20 .756 19.20 .874 22.20 .992 25.20 1.110 28.20 1.228 31.20 1.346 34.20 1.465 37.20 C .428 10.88 .546 13.88 .665 16.88 .783 19.88 .901 22.88 1.019 25.88 1.137 28.88 1.255 31.88 1.373 34.88 1.491 37.88 1.609 40.88 Part Numbers 1445048-2 1445048-3 1445048-4 1445048-5 1445048-6 1445048-7 1445048-8 1445048-9 1-1445048-0 1-1445048-1 1-1445048-2 *Recommended panel thickness .062-.091 [1.57-2.30]. Always consult customer drawing for panel cutout dimensions. Note: All part numbers are RoHS Compliant. 26 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density Plug Housings (Continued) Dual Row, Free-Hanging Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating--UL 94V-0 Related Product Data Contacts: Plug Contacts--page 22 .118 [3.00] Ref. Mateable Housings: Dual Row Receptacle Housings-- page 24 .118 [3.00] .270 [6.86] .335 [8.50] A Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 .665 [16.89] Dimension A .157 3.85 .276 6.85 .394 9.85 .512 12.85 .630 15.85 .748 18.85 .866 21.85 .984 24.85 1.102 27.85 1.220 30.85 1.339 33.85 1.457 36.85 Part Numbers 794616-2 794616-4 794616-6 794616-8 1-794616-0 1-794616-2 1-794616-4 1-794616-6 1-794616-8 2-794616-0 2-794616-2 2-794616-4 Note: All part numbers are RoHS Compliant. 27 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Plug Housings (Continued) Dual Row, Panel Mount .078 [1.98] .160 [4.06] Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating--UL 94V-0 .280 [7.11] Related Product Data Contacts: .343 [8.71] B Plug Contacts--page 22 C Mateable Housings: Recommended Panel Cutout* Dual Row Receptacle Housings-- page 24 .118 [3.00] Ref. .270 [6.86] .335 [8.50] A Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 A .157 3.85 .276 6.85 .394 9.85 .512 12.85 .630 15.85 .748 18.85 .866 21.85 .984 24.85 1.102 27.85 1.220 30.85 1.339 33.85 1.457 36.85 .665 [16.89] Dimensions B .165 4.20 .285 7.20 .402 10.20 .520 13.20 .638 16.20 .756 19.20 .874 22.20 .992 25.20 1.110 28.20 1.228 31.20 1.346 34.20 1.469 37.20 C .310 7.88 .428 10.88 .546 13.88 .665 16.88 .783 19.88 .901 22.88 1.019 25.88 1.137 28.88 1.255 31.88 1.373 34.88 1.491 37.88 1.609 40.88 Part Numbers 794615-2 794615-4 794615-6 794615-8 1-794615-0 1-794615-2 1-794615-4 1-794615-6 1-794615-8 2-794615-0 2-794615-2 2-794615-4 *Recommended panel thickness .062-.091 [1.57-2.30]. Always consult customer drawing for panel cutout dimensions. Note: All part numbers are RoHS Compliant. 28 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density .118 [3.00] New: Low Profile .152 [3.86] Low Profile Receptacle Housings .250 [6.37] A Material Positions Color 2 Black 3 Black 4 Black 2 Natural 3 Natural 4 Natural Low Profile Right Angle Surface Mount Housings Dimension A .276 7 .394 10 .512 13 .276 7 .394 10 .512 13 Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating--V0 Part Numbers 2029047-2 2029047-3 2029047-4 2029102-2 2029102-3 2029102-4 A .152 [3.86] .020 [0.51] Material .439 [11.16] C Hight Temp Nylon, Black Flammability Rating--V0 .118 Typ. [3.00] .050 .003 Typ. [1.27 0.08] .115 .003 [2.92 0.08] Contacts: Brass Plating A -- .0001100 (.00254) minimum tin over .000050 [0.00127] minimum nickel .216 [5.48] .025 [0.64] Positions Color 2 Black 3 Black 4 Black 2 Natural 3 Natural 4 Natural .118 [3.00] A .394 10 .512 13 .630 16 .394 10 .512 13 .630 16 .143 [3.635] B Dimensions B .410 10.4 .528 13.4 .646 16.4 .410 10.4 .52 13.4 .646 16.4 C .118 3 .263 6 .354 9 .118 3 .263 6 .354 9 Part Numbers 2029030-2 2029030-3 2029030-4 2029104-2 2029104-3 2029104-4 Note: Less than 4.7mm in vertical board surface height required! 29 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Vertical Header Assemblies A Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Single Row, Through-Hole, with Retention Feature on Soldertail and Polarization Feature to PCB .051 [1.30] .364 [9.24] Ref. .125 [3.18] Ref. Circuit 1 .152 [3.86] .020 [0.51] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts -- Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Related Product Data Mateable Housings: Single Row Receptacle Housings-- page 23 .031 [0.80] Dia. Ref. .118 [3.00] Typ. C .118 [3.00] Typ. .077 [1.96] .040 [1.02] Dia. Typ. Circuit 1 .118 [3.00] .050 [1.27] Dia. 2 Plc. B Recommended PC Board Layout* Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers A B C .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 .360 9.14 .478 12.14 .596 15.14 .714 18.14 .832 21.14 .950 24.14 1.069 27.14 1.187 30.14 1.304 33.14 1.423 36.14 1.541 39.14 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445050-2 2-1445084-2 2-1445093-2 1445022-2 2-1445050-3 2-1445084-3 2-1445093-3 1445022-3 2-1445050-4 2-1445084-4 2-1445093-4 1445022-4 2-1445050-5 2-1445084-5 2-1445093-5 1445022-5 2-1445050-6 2-1445084-6 2-1445093-6 1445022-6 2-1445050-7 2-1445084-7 2-1445093-7 1445022-7 2-1445050-8 2-1445084-8 2-1445093-8 1445022-8 2-1445050-9 2-1445084-9 3-1445093-9 1445022-9 3-1445050-0 3-1445084-0 3-1445093-0 1-1445022-0 3-1445050-1 3-1445084-1 3-1445093-1 1-1445022-1 3-1445050-2 3-1445084-2 3-1445093-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 30 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Vertical Header Assemblies (Continued) .364 [9.24] Ref. A .051 [1.30] .125 [3.18] Ref. Single Row, Through-Hole, with Metal Through-Hole Hold-down Contact Circuit 1 .152 [3.86] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Hold-down .020 [0.51] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .118 [3.00] Ref. C .085 [2.15] .095 Dia. [2.41] 2 Plc. Related Product Data Mateable Housings: B Single Row Receptacle Housing-- page 23 Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 .040 [1.02] Dia. Typ. .118 [3.00] Typ. Recommended PC Board Layout* Dimensions Header Part Numbers A B C .399 10.14 .517 13.14 .635 16.14 .754 19.14 .871 22.14 .990 25.14 1.108 28.14 1.226 31.14 1.344 34.14 1.462 37.14 1.580 40.14 .293 7.43 .411 10.43 .529 13.43 .647 16.43 .765 19.43 .883 22.43 1.001 25.43 1.119 28.43 1.237 31.43 1.356 34.43 1.474 37.43 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445051-2 2-1445085-2 2-1445094-2 1445022-2 2-1445051-3 2-1445085-3 2-1445094-3 1445022-3 2-1445051-4 2-1445085-4 2-1445094-4 1445022-4 2-1445051-5 2-1445085-5 2-1445094-5 1445022-5 2-1445051-6 2-1445085-6 2-1445094-6 1445022-6 2-1445051-7 2-1445085-7 2-1445094-7 1445022-7 2-1445051-8 2-1445085-8 2-1445094-8 1445022-8 2-1445051-9 2-1445085-9 2-1445094-9 1445022-9 3-1445051-0 3-1445085-0 3-1445094-0 1-1445022-0 3-1445051-1 3-1445085-1 3-1445094-1 1-1445022-1 3-1445051-2 3-1445085-2 3-1445094-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 31 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Vertical Header Assemblies .364 [9.24] Ref. (Continued) Single Row, Surface Mount, with Metal Through-Hole Hold-down .236 [6.00] Dia. .118 [3.00] Ref. .051 [1.30] Contact .113 [2.88] Ref. .156 [3.97] Ref. Circuit 1 Material and Finish Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 .152 [3.86] A .010 [0.25] Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Single Row Receptacle Housing-- page 23 C .050 [1.27] Typ. Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Related Product Data Mateable Housings: Hold-down .020 [0.51] Circuit 1 .118 [3.00] Typ. .100 [2.54] .126 [3.20] .095 [2.41] Dia. 2 Plc. .085 [2.15] B Recommended PC Board Layout* Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers A B C .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .293 7.43 .411 10.43 .529 13.43 .647 16.43 .765 19.43 .883 22.43 1.001 25.43 1.119 28.43 1.237 31.43 1.356 34.43 1.474 37.43 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445052-2 2-1445086-2 2-1445095-2 1445022-2 2-1445052-3 2-1445086-3 2-1445095-3 1445022-3 2-1445052-4 2-1445086-4 2-1445095-4 1445022-4 2-1445052-5 2-1445086-5 2-1445095-5 1445022-5 2-1445052-6 2-1445086-6 2-1445095-6 1445022-6 2-1445052-7 2-1445086-7 2-1445095-7 1445022-7 2-1445052-8 2-1445086-8 2-1445095-8 1445022-8 2-1445052-9 2-1445086-9 2-1445095-9 1445022-9 3-1445052-0 3-1445086-0 3-1445095-0 1-1445022-0 3-1445052-1 3-1445086-1 3-1445095-1 1-1445022-1 3-1445052-2 3-1445086-2 3-1445095-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 32 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .236 [6.00] Dia. (Continued) .118 [3.00] Ref. .051 [1.30] Circuit 1 Single Row, Surface Mount, with Surface Mount Hold-down Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Hold-down .020 [0.51] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .152 [3.86] Material and Finish A Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .156 [3.97] Ref. Contact C .050.003 [1.270.08] Typ. .118 3.00 Typ. Circuit 1 .100.003 [2.540.08] .126 [3.20] .065.003 [1.650.08] 2 Plc. Related Product Data Mateable Housings: .143 [3.635] Single Row Receptacle Housing-- page 23 .135.003 [3.430.08] 2 Plc. B Recommended PC Board Layout* Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers A B C .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .410 10.41 .528 13.41 .646 16.41 .765 19.41 .882 22.41 1.001 25.41 1.119 28.41 1.237 31.41 1.355 34.41 1.473 37.41 1.591 40.41 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445053-2 2-1445087-2 2-1445096-2 1445022-2 2-1445053-3 2-1445087-3 2-1445096-3 1445022-3 2-1445053-4 2-1445087-4 2-1445096-4 1445022-4 2-1445053-5 2-1445087-5 2-1445096-5 1445022-5 2-1445053-6 2-1445087-6 2-1445096-6 1445022-6 2-1445053-7 2-1445087-7 2-1445096-7 1445022-7 2-1445053-8 2-1445087-8 2-1445096-8 1445022-8 2-1445053-9 2-1445087-9 2-1445096-9 1445022-9 3-1445053-0 3-1445087-0 3-1445096-0 1-1445022-0 3-1445053-1 3-1445087-1 3-1445096-1 1-1445022-1 3-1445053-2 3-1445087-2 3-1445096-2 1-1445022-2 *Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 33 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Density .364 [9.24] Ref. Vertical Header Assemblies Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .270 [6.86] Vertical Header Assemblies (Continued) .118 [3.00] Z Dual Row, Through-Hole, with Retention Feature on Soldertail Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .364 [9.24] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Z Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel .118 [3.00] .125 [3.18] Section Z-Z A Retention Feature Located On End Contacts Only 4 Plc. Ref. .341 [8.67] B .138 [3.50] Min. .118 [3.00] Typ. Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .118 [3.00] Related Product Data Mateable Housings: .079 [2.00] Min. .040 [1.02] Dia. Typ. Dual Row Receptacle Housing--page 24 Recommended PC Board Layout* Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 A B Plating A Plating B Plating C Mates with Receptacle Housing Part Number .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 -- 3-794630-2 3-794631-2 3-794632-2 794617-2 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 3-794630-4 3-794631-4 3-794632-4 794617-4 3-794630-6 3-794631-6 3-794632-6 794617-6 3-794630-8 3-794631-8 3-794632-8 794617-8 4-794630-0 4-794631-0 4-794632-0 1-794617-0 4-794630-2 4-794631-2 4-794632-2 1-794617-2 4-794630-4 4-794631-4 4-794632-4 1-794617-4 4-794630-6 4-794631-6 4-794632-6 1-794617-6 4-794630-8 4-794631-8 4-794632-8 1-794617-8 5-794630-0 5-794631-0 5-794632-0 2-794617-0 5-794630-2 5-794631-2 5-794632-2 2-794617-2 5-794630-4 5-794631-4 5-794632-4 2-794617-4 Dimensions Header Part Numbers *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 34 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .118 [3.00] Z (Continued) Dual Row, Through-Hole, with Retention Feature on Soldertail and Metal Through-Hole Hold-down High Density .270 [6.86] Vertical Header Assemblies .364 [9.24] Contact Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Material and Finish Housing--High Temperature Nylon, Black Flammability Rating--UL 94V-0 .125 [3.18] .118 [3.00] Z Section Z-Z A Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Hold-down Retention Feature Located On End Contacts Only 4 Plc. Ref. .341 [8.67] B .084 [2.13] .118 [3.00] .059 [1.50] .118 [3.00] .095 [2.41] Dia. Typ. Related Product Data Mateable Housings: .040 [1.02] Dia. Typ. .087 [2.20] Min. .079 [2.00] Min. C Dual Row Receptacle Housing--page 24 Recommended PC Board Layout* Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 Dimensions Header Part Numbers Mates with Receptacle Housing Part Number A B C Plating A Plating B Plating C .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 -- .169 4.30 .287 7.30 .406 10.30 .524 13.30 .642 16.30 .760 19.30 .878 22.30 .996 25.30 1.114 28.30 1.232 31.30 1.350 34.30 1.469 37.30 3-794680-2 3-794681-2 3-794682-2 794617-2 3-794680-4 3-794681-4 3-794682-4 794617-4 3-794680-6 3-794681-6 3-794682-6 794617-6 3-794680-8 3-794681-8 3-794682-8 794617-8 4-794680-0 4-794681-0 4-794682-0 1-794617-0 4-794680-2 4-794681-2 4-794682-2 1-794617-2 4-794680-4 4-794681-4 4-794682-4 1-794617-4 4-794680-6 4-794681-6 4-794682-6 1-794617-6 4-794680-8 4-794681-8 4-794682-8 1-794617-8 5-794680-0 5-794681-0 5-794682-0 2-794617-0 5-794680-2 5-794681-2 5-794682-2 2-794617-2 5-794680-4 5-794681-4 5-794682-4 2-794617-4 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 35 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .118 [3.00] Typ. Vertical Header Assemblies (Continued) .431 [10.94] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Dual Row, Surface Mount, with Metal Through-Hole Hold-down .236 [6.00] Dia. Material and Finish Housing--High Temperature Nylon, Black Flammability Rating--UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel B 6 8 10 12 14 16 18 20 22 24 .185 [4.70] .370 [9.40] .050 [1.27] .095 [2.41] Dia. 2 Plc. .098 [2.50] Min. .087 [2.20] Min. Circuit 1 .084 [2.14] C Dual Row Receptacle Housing--page 24 4 .025 [0.635] .100 [2.54] Typ. Related Product Data Mateable Housings: Hold-down .118 [3.00] .050 [1.27] Typ. Pick-up Button--Kapton 2 Contact .364 .477 [9.24] [12.12] Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Number of Circuits .270 [6.86] .010 [0.25] A Recommended PC Board Layout* Dimensions A .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.10 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 Header Part Numbers Mates with Receptacle Housing Part Number B C Plating A Plating B Plating C -- .169 4.30 .287 7.30 .406 10.30 .524 13.30 .642 16.30 .760 19.30 .878 22.30 .996 25.30 1.114 28.30 1.232 31.30 1.350 34.30 1.469 37.30 3-794633-2 3-794634-2 3-794635-2 794617-2 3-794633-4 3-794634-4 3-794635-4 794617-4 3-794633-6 3-794634-6 3-794635-6 794617-6 3-794633-8 3-794634-8 3-794635-8 794617-8 4-794633-0 4-794634-0 4-794635-0 1-794617-0 4-794633-2 4-794634-2 4-794635-2 1-794617-2 4-794633-4 4-794634-4 4-794635-4 1-794617-4 4-794633-6 4-794634-6 4-794635-6 1-794617-6 4-794633-8 4-794634-8 4-794635-8 1-794617-8 5-794633-0 5-794634-0 5-794635-0 2-794617-0 5-794633-2 5-794634-2 5-794635-2 2-794617-2 5-794633-4 5-794634-4 5-794635-4 2-794617-4 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 2.827 21.00 0.945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 36 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Vertical Header Assemblies .118 [3.00] Typ. (Continued) Dual Row, Surface Mount, with Surface Mount Hold-down .431 [10.94] Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 .236 [6.00] Dia. A Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Hold-down .050 [1.27] Typ. .025 .068 [.635] [1.715] 6 8 10 12 14 16 18 20 22 24 .118 [3.00] .100 [2.54] .050 [1.27] .370 [9.40] .185 [4.70] .032 [0.825] .098 [2.50] Min. .065 [1.65] Typ. Circuit 1 .118 [3.00] Min. .135 [3.43] Typ. C Dual Row Receptacle Housing--page 24 4 Contact B Related Product Data Mateable Housings: 2 .270 [6.86] .010 [0.25] .364 [9.24] Pick-up Button -- Kapton Number of Circuits Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Material and Finish Recommended PC Board Layout* Dimensions A .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 Header Part Numbers Mates with Receptacle Housing Part Number B C Plating A Plating B Plating C -- .286 7.27 .404 10.27 .522 13.27 .640 16.27 .758 19.27 .876 22.27 .994 25.27 1.112 28.27 1.230 31.27 1.349 34.27 1.467 37.27 1.585 40.27 3-794636-2 3-794637-2 3-794638-2 794617-2 3-794636-4 3-794637-4 3-794638-4 794617-4 3-794636-6 3-794637-6 3-794638-6 794617-6 3-794636-8 3-794637-8 3-794638-8 794617-8 4-794636-0 4-794637-0 4-794638-0 1-794617-0 4-794636-2 4-794637-2 4-794638-2 1-794617-2 4-794636-4 4-794637-4 4-794638-4 1-794617-4 4-794636-6 4-794637-6 4-794638-6 1-794617-6 4-794636-8 4-794637-8 4-794638-8 1-794617-8 5-794636-0 5-794637-0 5-794638-0 2-794617-0 5-794636-2 5-794637-2 5-794638-2 2-794617-2 5-794636-4 5-794637-4 5-794638-4 2-794617-4 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 *Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 37 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies A .051 [1.30] .152 [3.86] Hold-down Single Row, Through-Hole, with Metal Through-Hole Hold-down Contact .285 [7.25] Ref. Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Circuit 1 .020 [0.51] .351 [8.92] Ref. Material and Finish .118 [3.00] Ref. Housing--High Temperature Nylon, Black Flammability Rating--UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel C .170 [4.32] Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Related Product Data Mateable Housings: Circuit 1 .095 [2.41] Dia. 2 Plc. Single Row Receptacle Housing-- page 23 Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 .040 [1.02] Dia. Typ. .118 [3.00] Typ. .085 [2.15] B Recommended PC Board Layout* Dimensions Header Part Numbers A B C .399 10.14 .517 13.14 .635 16.14 .754 19.14 .871 22.14 .990 25.14 1.108 28.14 1.226 31.14 1.344 34.14 1.462 37.14 1.580 40.14 .293 7.43 .411 10.43 .529 13.43 .647 16.43 .765 19.43 .883 22.43 1.001 25.43 1.119 28.43 1.237 31.43 1.356 34.43 1.474 37.43 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445054-2 2-1445088-2 2-1445097-2 1445022-2 2-1445054-3 2-1445088-3 2-1445097-3 1445022-3 2-1445054-4 2-1445088-4 2-1445097-4 1445022-4 2-1445054-5 2-1445088-5 2-1445097-5 1445022-5 2-1445054-6 2-1445088-6 2-1445097-6 1445022-6 2-1445054-7 2-1445088-7 2-1445097-7 1445022-7 2-1445054-8 2-1445088-8 2-1445097-8 1445022-8 2-1445054-9 2-1445088-9 2-1445097-9 1445022-9 3-1445054-0 3-1445088-0 3-1445097-0 1-1445022-0 3-1445054-1 3-1445088-1 3-1445097-1 1-1445022-1 3-1445054-2 3-1445088-2 3-1445097-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 38 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Right-Angle Header Assemblies (Continued) A .051 [1.30] .152 [3.86] Circuit 1 Single Row, Through-Hole, with Plastic Boardlock .002 [0.51] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Single Row Receptacle Housing-- page 23 .118 [3.00] Circuit 1 .118 [3.00] Dia. 2 3 4 5 6 7 8 9 10 11 12 .236 [6.00] .118 [3.00] .118 [3.00] Typ. .170 [4.32] .040 Dia. [1.02] 3 Plc. Circuit 1 .118 Dia. [3.00] 2 Plc. .170 [4.32] .059 [1.50] Circuit 1 .085 [2.15] B .118 [3.00] Dia. Recommended PC Board Layout 2 Position* Number of Circuits C .040 [1.02] Dia.Typ. .170 [4.32] Related Product Data Mateable Housings: .351 [8.92] Ref. .118 [3.00] Ref. .040 Dia. [1.02] 2 Plc. Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .310 [7.88] Ref. Recommended PC Board Layout 3 Position* Dimensions Recommended PC Board Layout 4-12 Position* Header Part Numbers Plating A Plating B Plating C Mates with Receptacle Housing Part Number A B C .399 10.14 .517 13.14 .635 16.14 .754 19.14 .871 22.14 .990 25.14 1.108 28.14 1.226 31.14 1.344 34.14 1.462 37.14 1.580 40.14 -- -- 2-1445055-2 2-1445089-2 2-1445098-2 1445022-2 -- -- 2-1445055-3 2-1445089-3 2-1445098-3 1445022-3 .185 4.70 .303 7.70 .421 10.70 .539 13.70 .657 16.70 .775 19.70 .894 22.70 1.012 25.70 1.300 28.70 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 2-1445055-4 2-1445089-4 2-1445098-4 1445022-4 2-1445055-5 2-1445089-5 2-1445098-5 1445022-5 2-1445055-6 2-1445089-6 2-1445098-6 1445022-6 2-1445055-7 2-1445089-7 2-1445098-7 1445022-7 2-1445055-8 2-1445089-8 2-1445098-8 1445022-8 2-1445055-9 2-1445089-9 2-1445098-9 1445022-9 3-1445055-0 3-1445089-0 3-1445098-0 1-1445022-0 3-1445055-1 3-1445089-1 3-1445098-1 1-1445022-1 3-1445055-2 3-1445089-2 3-1445098-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 39 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A .152 [3.86] Single Row, Surface Mount, with Metal Through-Hole Hold-down Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .051 [1.30] Circuit 1 Hold-down Contact .285 [7.25] Ref. .020 [0.51] Material and Finish .439 [11.16] Ref. Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel .118 [3.00] Ref. C .050 [1.27] Typ. .118 [3.00] Typ. .115 [2.92] Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Related Product Data Mateable Housings: .216 [5.48] Circuit 1 .095 [2.41] Dia. 2 Plc. .085 [2.15] Single Row Receptacle Housing-- page 23 B Recommended PC Board Layout* Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers A B C .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .293 7.43 .411 10.43 .529 13.43 .647 16.43 .765 19.43 .883 22.43 1.001 25.43 1.119 28.43 1.237 31.43 1.356 34.43 1.474 37.43 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 0.945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445056-2 2-1445090-2 2-1445099-2 1445022-2 2-1445056-3 2-1445090-3 2-1445099-3 1445022-3 2-1445056-4 2-1445090-4 2-1445099-4 1445022-4 2-1445056-5 2-1445090-5 2-1445099-5 1445022-5 2-1445056-6 2-1445090-6 2-1445099-6 1445022-6 2-1445056-7 2-1445090-7 2-1445099-7 1445022-7 2-1445056-8 2-1445090-8 2-1445099-8 1445022-8 2-1445056-9 2-1445090-9 2-1445099-9 1445022-9 3-1445056-0 3-1445090-0 3-1445099-0 1-1445022-0 3-1445056-1 3-1445090-1 3-1445099-1 1-1445022-1 3-1445056-2 3-1445090-2 3-1445099-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 40 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) A High Density Right-Angle Header Assemblies (Continued) .051 [1.30] Circuit 1 .152 [3.86] Hold-down Single Row, Surface Mount, with Surface Mount Hold-down Contact .020 [0.51] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .439 [11.16] Ref. Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .118 [3.00] Ref. C .118 [3.00] Typ. .050 [1.27] Typ. 3 4 5 6 7 8 9 10 11 12 .135 [3.43] 2 Plc. .143 [3.635] .065 [1.65] B Single Row Receptacle Housing-- page 23 2 .115 [2.92] .216 [5.48] Related Product Data Mateable Housings: Number of Circuits Circuit 1 Recommended PC Board Layout* Dimensions Header Part Numbers A B C .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .410 10.41 .528 13.41 .646 16.41 .764 19.41 .882 22.41 1.000 25.41 1.119 28.41 1.237 31.41 1.355 34.41 1.472 37.41 1.591 40.41 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445057-2 2-1445091-2 2-1445100-2 1445022-2 2-1445057-3 2-1445091-3 2-1445100-3 1445022-3 2-1445057-4 2-1445091-4 2-1445100-4 1445022-4 2-1445057-5 2-1445091-5 2-1445100-5 1445022-5 2-1445057-6 2-1445091-6 2-1445100-6 1445022-6 2-1445057-7 2-1445091-7 2-1445100-7 1445022-7 2-1445057-8 2-1445091-8 2-1445100-8 1445022-8 2-1445057-9 2-1445091-9 2-1445100-9 1445022-9 3-1445057-0 3-1445091-0 3-1445100-0 1-1445022-0 3-1445057-1 3-1445091-1 3-1445100-1 1-1445022-1 3-1445057-2 3-1445091-2 3-1445100-2 1-1445022-2 *Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 41 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A .051 [1.30] .152 [3.86] Circuit 1 Single Row, Surface Mount, with Plastic Boardlock .310 [7.88] Ref. Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .020 [0.51] Material and Finish .181 [4.60] Ref. Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Related Product Data Mateable Housings: .439 [11.16] Ref. .118 [3.00] Ref. C .059 [1.50] .050 [1.27] Typ. .236 [6.00] .118 [3.00] .118 [3.00] .050 [1.27] Typ. .115 [2.92] .216 [5.48] Circuit 1 .216 [5.48] Recommended PC Board Layout * 2 Position .118 [3.00] Dia. 2 Plc. Circuit 1 .118 [3.00] Dia. .118 [3.00] Dia. .118 [3.00] Typ. .115 [2.92] .216 [5.48] Circuit 1 Single Row Receptacle Housing-- page 23 .050 [1.27] Typ. .115 [2.92] .085 [2.15] B Recommended PC Board Layout * 3 Position Recommended PC Board Layout* 4-12 Positions Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers Plating A Plating B Plating C Mates with Receptacle Housing Part Number A B C .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 -- -- 2-1445058-2 2-1445092-2 2-1445101-2 1445022-2 -- -- 2-1445058-3 2-1445092-3 2-1445101-3 1445022-3 .185 4.70 .303 7.70 .421 10.70 .539 13.70 .657 16.70 .776 19.70 .894 22.70 1.012 25.70 1.130 28.70 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 2-1445058-4 2-1445092-4 2-1445101-4 1445022-4 2-1445058-5 2-1445092-5 2-1445101-5 1445022-5 2-1445058-6 2-1445092-6 2-1445101-6 1445022-6 2-1445058-7 2-1445092-7 2-1445101-7 1445022-7 2-1445058-8 2-1445092-8 2-1445101-8 1445022-8 2-1445058-9 2-1445092-9 2-1445101-9 1445022-9 3-1445058-0 3-1445092-0 3-1445101-0 1-1445022-0 3-1445058-1 3-1445092-1 3-1445101-1 1-1445022-1 3-1445058-2 3-1445092-2 3-1445101-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 42 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) A High Density Right-Angle Header Assemblies (Continued) .051 [1.30] Dual Row, Through-Hole, with Metal Through-Hole Hold-down .290 [7.37] .404 [10.25] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 .351 [8.92] .469 [11.92] Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel .118 [3.00] C .085 [2.16] .118 [3.00] .040 [1.02] Dia. Typ. .118 [3.00] .170 [4.32] .095 [2.41] Dia. 2 Plc. Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Related Product Data Mateable Housings: B Dual Row Receptacle Housing--page 24 Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 Recommended PC Board Layout* Dimensions A B .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .169 4.30 .287 7.30 .406 10.30 .524 13.30 .642 16.30 .760 19.30 .878 22.30 .996 25.30 1.114 28.30 1.232 31.30 1.350 34.30 1.469 37.30 Header Part Numbers Mates with Receptacle Housing Part Number C Plating A Plating B Plating C -- 3-794677-2 3-794678-2 3-794679-2 794617-2 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 3-794677-4 3-794678-4 3-794679-4 794617-4 3-794677-6 3-794678-6 3-794679-6 794617-6 3-794677-8 3-794678-8 3-794679-8 794617-8 4-794677-0 4-794678-0 4-794679-0 1-794617-0 4-794677-2 4-794678-2 4-794679-2 1-794617-2 4-794677-4 4-794678-4 4-794679-4 1-794617-4 4-794677-6 4-794678-6 4-794679-6 1-794617-6 4-794677-8 4-794678-8 4-794679-8 1-794617-8 5-794677-0 5-794678-0 5-794679-0 2-794617-0 5-794677-2 5-794678-2 5-794679-2 2-794617-2 5-794677-4 5-794678-4 5-794679-4 2-794617-4 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 43 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A .051 [1.30] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Dual Row, Through-Hole, with Plastic Boardlock .428 [10.88] .290 [7.37] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 .351 [8.92] Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel .469 [11.92] .118 [3.00] 8 Thru 24 Position 6 Position 4 Position 2 Position .118 [3.00] .236 [6.00] .118 [3.00] C .118 [3.00] .040 [1.02] Dia. Typ. .118 [3.00] .118 [3.00] .170 [4.32] .170 [4.32] .181 [4.60] Min. .181 [4.60] Min. Related Product Data Mateable Housings: .138 [3.50] Min. Dual Row Receptacle Housing--page 24 .197 [5.00] Min. .059 .118 [1.50] [3.00] .256 [6.50] Min. B .085 [2.16] .222 [5.65] Min. .118 [3.00] Dia. Typ. Recommended PC Board Layout* Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 Dimensions Header Part Numbers Mates with Receptacle Housing Part Number C Plating A Plating B Plating C -- -- 3-794618-2 3-794619-2 3-794620-2 794617-2 -- .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 3-794618-4 3-794619-4 3-794620-4 794617-4 3-794618-6 3-794619-6 3-794620-6 794617-6 3-794618-8 3-794619-8 3-794620-8 794617-8 4-794618-0 4-794619-0 4-794620-0 1-794617-0 4-794618-2 4-794619-2 4-794620-2 1-794617-2 4-794618-4 4-794619-4 4-794620-4 1-794617-4 4-794618-6 4-794619-6 4-794620-6 1-794617-6 4-794618-8 4-794619-8 4-794620-8 1-794617-8 5-794618-0 5-794619-0 5-794620-0 2-794617-0 5-794618-2 5-794619-2 5-794620-2 2-794617-2 5-794618-4 5-794619-4 5-794620-4 2-794617-4 A B .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 -- .185 4.70 .303 7.70 .421 10.70 .539 13.70 .657 16.70 .776 19.70 .894 22.70 1.012 25.70 1.130 28.70 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 44 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Right-Angle Header Assemblies (Continued) Contacts .404 [10.25] Dual Row, Surface Mount, with Metal Through-Hole Hold-down .290 [7.37] .051 [1.30] .118 [3.00] Material and Finish Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .439 [11.16] Hold-down .615 [15.63] Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 A Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel C .118 [3.00] .025 [0.635] .050 [1.27] Typ. .085 [2.15] .115 [2.92] .057 [1.46] .398 [10.10] Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Circuit 1 .216 [5.48] .222 [5.65] Min. .095 [2.41] Dia. 2 Plc. Related Product Data Mateable Housings: B .087 [2.20] Min. Dual Row Receptacle Housing--page 24 Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 Recommended PC Board Layout* Dimensions Header Part Numbers Mates with Receptacle Housing Part Number A B C Plating A Plating B Plating C .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .169 4.30 .287 7.30 .406 10.30 .524 13.30 .642 16.30 .760 19.30 .878 22.30 .996 25.30 1.114 28.30 1.232 31.30 1.350 34.30 1.469 37.30 -- 3-794624-2 3-794625-2 3-794626-2 794617-2 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 3-794624-4 3-794625-4 3-794626-4 794617-4 3-794624-6 3-794625-6 3-794626-6 794617-6 3-794624-8 3-794625-8 3-794626-8 794617-8 4-794624-0 4-794625-0 4-794626-0 1-794617-0 4-794624-2 4-794625-2 4-794626-2 1-794617-2 4-794624-4 4-794625-4 4-794626-4 1-794617-4 4-794624-6 4-794625-6 4-794626-6 1-794617-6 4-794624-8 4-794625-8 4-794626-8 1-794617-8 5-794624-0 5-794625-0 5-794626-0 2-794617-0 5-794624-2 5-794625-2 5-794626-2 2-794617-2 5-794624-4 5-794625-4 5-794626-4 2-794617-4 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 45 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A Dual Row, Surface Mount, with Plastic Boardlock Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .428 [10.88] .290 [7.37] .051 [1.30] Material and Finish .439 [11.16] Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 .615 [15.63] Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel .118 [3.00] 6 Position 4 Position 2 Position .118 [3.00] .236 [6.00] 8 Thru 24 Position C .118 [3.00] .118 [3.00] .115 [2.92] .398 [10.10] Related Product Data Mateable Housings: Dual Row Receptacle Housing--page 24 .216 [5.48] .216 [5.48] .181 [4.60] Min. .398 [10.10] .181 [4.60] Min. .059 [1.50] .138 [3.50] Min. .256 [6.50] Min. .197 [5.00] Min. .118 [3.00] Dia. Typ. .118 .085 [3.00] [2.15] .222 [5.65] Min. B Recommended PC Board Layout* Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 Dimensions Header Part Numbers Mates with Receptacle Housing Part Number C Plating A Plating B Plating C -- -- 3-794621-2 3-794622-2 3-794623-2 794617-2 -- .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 3-794621-4 3-794622-4 3-794623-4 794617-4 3-794621-6 3-794622-6 3-794623-6 794617-6 3-794621-8 3-794622-8 3-794623-8 794617-8 4-794621-0 4-794622-0 4-794623-0 1-794617-0 4-794621-2 4-794622-2 4-794623-2 1-794617-2 4-794621-4 4-794622-4 4-794623-4 1-794617-4 4-794621-6 4-794622-6 4-794623-6 1-794617-6 4-794621-8 4-794622-8 4-794623-8 1-794617-8 5-794621-0 5-794622-0 5-794623-0 2-794617-0 5-794621-2 5-794622-2 5-794623-2 2-794617-2 5-794621-4 5-794622-4 5-794623-4 2-794617-4 A B .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 -- .185 4.70 .303 7.70 .421 10.70 .539 13.70 .657 16.70 .776 19.70 .894 22.70 1.012 25.70 1.130 28.70 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 46 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Right-Angle Header Assemblies (Continued) .051 [1.30] A Hold-down Contacts .290 [7.37] Dual Row, Surface Mount, with Surface Mount Hold-down Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel 4 6 8 10 12 14 16 18 20 22 24 .115 [2.92] .057 [1.46] .398 [10.10] Circuit 1 .216 [5.48] .222 [5.65] Min. .118 [3.00] Min. .065 [1.65] .032 [0.83] .068 [1.72] .135 [3.43] Typ. .153 [3.90] B Recommended PC Board Layout* Dual Row Receptacle Housing--page 24 2 .050 [1.27] .025 [0.64] .118 [3.00] Related Product Data Mateable Housings: Number of Circuits C .118 [3.00] Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .439 [11.16] .615 [15.63] Dimensions Header Part Numbers Mates with Receptacle Housing Part Number A B C Plating A Plating B Plating C .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .276 7.27 .394 10.27 .512 13.27 .630 16.27 .748 19.27 .866 22.27 .984 25.27 1.102 28.27 1.220 31.27 1.339 34.27 1.457 37.27 1.575 40.27 -- 3-794627-2 3-794628-2 3-794629-2 794617-2 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 3-794627-4 3-794628-4 3-794629-4 794617-4 3-794627-6 3-794628-6 3-794629-6 794617-6 3-794627-8 3-794628-8 3-794629-8 794617-8 4-794627-0 4-794628-0 4-794629-0 1-794617-0 4-794627-2 4-794628-2 4-794629-2 1-794617-2 4-794627-4 4-794628-4 4-794629-4 1-794617-4 4-794627-6 4-794628-6 4-794629-6 1-794617-6 4-794627-8 4-794628-8 4-794629-8 1-794617-8 5-794627-0 5-794628-0 5-794629-0 2-794617-0 5-794627-2 5-794628-2 5-794629-2 2-794617-2 5-794627-4 5-794628-4 5-794629-4 2-794617-4 *Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 47 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Engineering Notes 48 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) Product Facts Grace Inertia Connectors .137 [3.50] Centerline wire-to-wire connectors (3.5 mm centerline) can handle 18 AWG wire Locking mechanism helps prevent connectors from being disconnected during movement or transportation Four kinds of keying per color-coded housing Improved housing shape offers easier mating Complies with lead free requirements Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. E28476 High Density Small R R Performance Characteristics Voltage Rating--300 VAC Current Rating--7 A (max.) Centerline--3.5 mm Applicable Wire--26 to 18 AWG Temperature Rating-- -30C to 105C This connector employs the inertia locking mechanism, which simultaneously locks when mated to help prevent mismating. It is widely used for large-sized household electric appliances, such as refrigerators, washing machines, or dispensers. Depending on the working environment, a locking sound is difficult to confirm during mating of a connector. However, this connector supports secure mating operation even in such a working environment. Material and Finish Technical Documents Housing--6/6 Nylon UL94V-0 (CTI 600 V or more) Terminal--Pre-tin Copper alloy Product Specification 108-5810 Application Specification 114-5306 Note: All dimensions shown are metric. 49 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) (Continued) High Density Contacts Material and Finish Pre-tinned Copper Alloy 1.2 PM A 1.9 Grace Inertia Connectors .137 [3.50] Centerline PM A Tab Contact (For Cap Housing) 2.8 Receptacle Contact (For Plug Housing) 13.4 16.5 0.5 MAX CUT OFF TAB 6 0.5 MAX CUT OFF TAB 0.5 2.04 2.04 2.3 Wire Range AWG 26-22 22-18 Insulation Dia. mm mm2 0.13-0.34 0.3-0.9 1.3-2.0 1.5-2.7 Contact Part Number Receptacle 1612334-1 1565079-1 Tool Part Number Tab 1612335-1 1565080-1 Terminator/Applicator ** ** CERTI-CRIMP Hand Tool ---- 1596277-1 *Cut the contact carrier strip when using a hand tool. ** Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Terminator or Applicator Part Numbers. Double Lock Plates Material 6/6 Nylon glass filled (UL94V-0) 2 Position 3 Position tyco 13.25 2.95 3.5 7 9.75 2.95 3.5 tyco A A 3.7 (8) 3.7 4.31 4.31 8.03 P/N 1565089-1 *Two four-positions are used. P/N 1565090-1 *Two six-positions are used. Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 50 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) (Continued) 2 Position High Density Material 6/6 Nylon, UL94V-0 (CTI 600 V or more) Plug Housing (For Receptacles) Cap Housing (For Tabs) 26.4 19.4 14 9.05 9.1 7.75 2 1 7.75 1 tyco 2 Grace Inertia Connectors .137 [3.50] Centerline CIRCUIT NO. 7.85 CAVITY MARK R2 3.5 R1 3.5 R1 A 9.3 6.45 R0 .9 R1 R1 R1 7.4 9.55 A Part Number Related Product Data Receptacle and Tab Contacts--page 50 Double Lock Plate--page 50 Color Keying Natural Red Blue Yellow A B C D Plug Housing 1565081-1 1-1565081-2 2-1565081-3 3-1565081-4 Cap Housing 1565085-1 1-1565085-2 2-1565085-3 3-1565085-4 3 Position Material 6/6 Nylon, UL94V-0 (CTI 600 V or more) Plug Housing (For Receptacles) Cap Housing (For Tabs) 26.4 12.6 2 CIRCUIT NO. tyco 2 11.25 1 3 12.55 11.25 3 TRADE MARK 1 7 11.35 R1 3.5 CAVITY MARK 9.3 6.45 R0 R1 R1 .9 R1 7.4 9.55 A 3.5 7 Part Number Note: All dimensions shown are metric. Color Keying Natural Red Blue Yellow A B C D Plug Housing 1565082-1 1-1565082-2 2-1565082-3 3-1565082-4 Cap Housing 1565086-1 1-1565086-2 2-1565086-3 3-1565086-4 Note: All part numbers are RoHS Compliant. 51 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) (Continued) High Density 4 Position Plug Housing (For Receptacles) Cap Housing (For Tabs) 26.4 9.05 7.75 9.1 1 tyco 2 7.75 19.4 Grace Inertia Connectors .137 [3.50] Centerline 7.85 R1 3.5 R0 R1 R1 13.95 R1 .9 4.8 14.2 A 11.1 4.8 12.05 A 3.5 Part Number Material 6/6 Nylon, UL94V-0 (CTI 600 V or more) Related Product Data Receptacle and Tab Contacts--page 50 Double Lock Plate--page 50 Color Keying Natural Red Blue Yellow A B C D Plug Housing 1565083-1 1-1565083-2 2-1565083-3 3-1565083-4 Cap Housing 1565087-1 1-1565087-2 2-1565087-3 3-1565087-4 6 Position Plug Housing (For Receptacles) Cap Housing (For Tabs) 26.4 19.4 26.4 19.4 CIRCUIT NO. 12.55 11.25 12.6 2 AMP 2 11.25 3 3 1 1 7 11.35 R2 CAVITY MARK R1 3.5 A 13.95 R1 .9 4.8 11.1 R1 R1 14.2 12.05 4.8 A R0 3.5 7 Material 6/6 Nylon, UL94V-0 (CTI 600 V or more) Note: All dimensions shown are metric. Part Number Color Keying Natural Red Blue Yellow A B C D Plug Housing 1565084-1 1-1565084-2 2-1565084-3 3-1565084-4 Cap Housing 1565088-1 1-1565088-2 2-1565088-3 3-1565088-4 Note: All part numbers are RoHS Compliant. 52 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors Product Facts Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mount and freehanging styles "F" crimp contacts Applicator and hand tool available Economical commercialgrade connectors Compatible with high-speed application machinery and most other manufacturers' soft shells Wire range 30 to 18 AWG [0.05 to 0.9 mm2] Accepts wires with insulation diameters as large as .110 [2.79] Housings available in 1 to 9 positions .062 plug and receptacle housings accept pin or socket contacts. The preferred convention is to use socket contacts with receptacle housings Not for interrupting current Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR 7189 Technical Documents The .062 Commercial Pin and Socket Connectors performance characteristics found on pages 53-54 are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. Product Specification 108-1037 .062 Commercial Pin and Socket Connectors Application Specification 114-1013 .062 Commercial Pin and Socket Connectors Durability--10 mating cycles Dielectric Withstanding Voltage-- 1.0 kVAC Insulation Resistance--1000 megohms min. initial Voltage Rating--250 V AC or DC R Performance Characteristics .062 [1.57] Commercial Pin and Socket Connectors .145 [3.68] Centerline Polarized High Density Connector Mating--2.5 lb. [11.1 N] max. per contact Connector Unmating--0.3 lb. [1.3 N] min. per contact R Contact Insertion Force-- 4.0 lb. [17.8 N] max. per contact Contact Retention-- 7 lb. [31.1 N] min. 15 lb. [66.6 N] min. for contacts 770983-1 and 794380-1 53 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Performance Characteristics Current Rating Verification for 30C Maximum Temperature Rise 100% Energized (Continued) .062 [1.57] Commercial Pin and Socket Connectors .145 [3.68] Centerline High Density Maximum Current--Maximum current rating of .062 Commercial Pin and Socket connectors is limited by the maximum operating temperature of the housings which is 105C including the temperature rise of the contacts which is a maximum of 30C. There are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. These variables are: Wire Size--Larger wire will carry more current since it has less internal resistance to current flow and thus generates less heat. Longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. Wire-to-Wire .062 Commercial Pin and Socket Connectors Calculated Current Table Wire Gauge Number of Circuits 18 7.00 7.00 6.00 6.00 6.00 5.00 2 3 4 4 6 9 20 6.00 6.00 6.00 5.00 5.00 4.00 22 5.00 5.00 5.00 4.00 4.00 4.00 24 4.00 4.00 4.00 3.00 3.00 3.00 Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded housings being 100% energized. Note: All combinations were not tested, and this chart contains interpolated and extrapolated values. Connector Size--In general, the more circuits in a connector, the less current can be carried. Ambient Temperature--The higher the ambient temperature, the less current can be carried in any given connector. Related Product Data Product Specification -- 108-1037 Application Specification -- 114-1013 Minimum Wire Lengths for T-Rise vs. Current Testing AWG 30 28 26 24 20 Min. Length (in.) 2.6 3.2 4.1 5.1 7.8 AWG 18 16 14 12 10 Min. Length (in.) 9.4 11.3 13.7 16.4 19.3 Note: If wire lengths used are less than those listed above, the current-carrying ability of the system will be reduced due to less heat being conducted away from the connector. The customer should fully test all applications. Termination Resistance/Contact Crimp Tensile Force Wire Size AWG mm2 24 22 20 18 0.2 0.3-0.4 0.5-0.6 0.8-0.9 Termination Resistance Test Resistance Current Milliohms (Amps) (Max. Init.) 1.5 3.0 4.5 6.0 3.50 3.50 3.00 3.00 Contact Crimp Tensile Force Force (Min.) lbs. N 10 44.5 10 44.5 13 57.8 14 62.3 Note: This is the total resistance between wire crimps of a mated pin and socket. 54 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Contacts Pin Diameter .062 [1.57] Material .665 [16.89] Pin Related Product Data Wire Size AWG mm2 Ins. Dia. Socket Material & Finish Brass Pre-tin .060 Brass, 30-24 0.05-0.2 1.52 Max. Select Gold1 Phos. Brz., Pre-tin Brass Pre-tin 24-18 0.2-0.9 .050-.110 1.27-2.79 Phos. Brz., Pre-tin Brass, Select Gold1 Phos. Brz., Select Gold1 .062 [1.57] Commercial Pin and Socket Connectors .145 [3.68] Centerline Performance Characteristics-- pages 53-54 Housings--pages 56-57 Panel Cutouts--page 57 Technical Documents--pages 53 and 205-206 Application Tooling--pages 207-210 Product Specification-- 108-1037-1 .660 [16.76] High Density .008 [0.20] Stock Thickness Pin and socket contacts can be used in either plug or receptacle housings. It is preferred to use socket contacts in receptacle housings. Contact Part Numbers HDM Hand Tool Pin Socket Applicator Part No. Strip Form Loose Pieces Strip Form Loose Pieces Part No. 640391-1 794018-1 640392-1 794019-1 -- -- 794046-12 -- 466686-13 1 1 640391-5 -- 640392-5 -- 466686-23 90870-1 466686-33 -- -- 640392-2 -- 350629-1 794017-1 350628-1 794016-1 794380-14 -- 794103-12 770983-14 -- 350629-8 -- 350628-2 -- 350629-51 -- 350628-51 -- -- -- 350628-61 -- 687996-13 687996-23 90869-1 687996-33 1Select Gold--.000030 [.000762] min. in mating area over .000050 [.00127] nickel. Socket for Overmolding. 3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See pages 207210 for further information. 4Contact Retention 15 lbs. [66.6 N] min. 2Lanceless Note: Phosphor bronze contacts should be used in high-temperature/humidity cycling applications. Note: All part numbers are RoHS Compliant. Contact Insertion Tool (for Pins and Sockets) Part No. 91002-1 IS 408-7347 Contact Extraction Tool Part No. 318831-1 IS 408-4370 55 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Housings 1 Circuit Free-Hanging or Panel Mount .203 [5.16] Min. Dia. .145 [3.68] Centerline spacing High Density Material Housing --Nylon, natural color Flammability Rating --UL94V-2 .200 [5.08] Max. Dia. Related Product Data C .300 [7.62] Dia. Receptacle C Plug Contacts -- page 55 .062 [1.57] Commercial Pin and Socket Connectors .145 [3.68] Centerline Product Specification -- 108-1037 2, 3, and 4 Circuit, In-Line Panel-Mount Flange .145 [3.68] Typ. .145 [3.68] Typ. Panel-Mount Flange A A B C B Receptacle Plug Dimensions No. of Circuits Receptacle Part Numbers Receptacle Plug A B C A B C 1 -- -- -- -- 2 .340 8.64 .490 12.45 .635 16.13 .345 8.76 .345 8.76 .490 12.45 .199 5.05 .199 5.05 .199 5.05 .345 8.76 .495 12.57 .495 12.57 .785 19.94 .820 20.83 .785 19.94 .785 19.94 .878 22.30 .785 19.94 .790 20.07 .440 11.18 .590 14.99 .733 18.62 .445 11.30 .445 11.30 .590 14.99 .300 7.62 .300 7.62 .300 7.62 .445 11.30 .600 15.24 .600 15.24 .750 19.05 .780 19.81 .750 19.05 .750 19.05 .868 22.04 .750 19.05 .750 19.05 3 4 (In-Line) 4 (Matrix) 6 9 C Plug Part Numbers Panel Mount FreeHanging Panel Mount FreeHanging -- 770277-1 -- 770278-1 770343-1 770342-1 770419-11 770341-1 770340-1 770326-1 770333-1 770332-1 770331-1 770335-1 770274-1 770334-1 770275-1 770441-1 770442-1 770443-1 770433-1 770354-1 770356-1 770353-1 770355-1 770427-1 770429-1 770426-1 770428-1 1 Positive Lock Note: All part numbers are RoHS Compliant. 56 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Housings 4, 6, and 9 Circuit, Matrix Free-Hanging or Panel Mount .145 [3.68] Centerline spacing .145 [3.68] Typ. Housing -- Nylon, natural color Flammability Rating -- UL94V-2 Panel-Mount Flange .145 [3.68] Related Product Data High Density .145 [3.68] Typ. Material Panel-Mount Flange .145 [3.68] A A Contacts -- page 55 C Recommended Panel Cutouts Plug Maximum panel thickness is .060 [1.52]. 2 3 Related Product Data Product Specification -- 108-1037 Panel Cutout Dimensions Receptacle No. of Circuits A B C B Receptacle .062 [1.57] Commercial Pin and Socket Connectors .145 [3.68] Centerline B 4 (In-Line) 4 (Matrix) 6 9 A .265 6.73 .265 6.73 .260 6.60 .400 10.16 .505 12.83 .552 14.02 B .505 12.83 .650 16.51 .785 19.94 .506 12.85 .552 14.02 .650 16.51 A .318 8.08 .318 8.08 .312 7.92 .465 11.81 .607 15.42 .615 15.62 Plug B .609 15.47 .754 19.15 .865 21.97 .615 15.62 .615 15.62 .752 19.10 Note: The panel should be punched so that the housing enters in the same direction as the punch. Note: All part numbers are RoHS Compliant. 57 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Engineering Notes 58 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) Product Facts Power R Power Double Lock Connectors are compact connectors designed for use in power circuit applications and are ideally suited for wiring in refrigerators, air conditioners, washing machines, gas equipment, copying machines and automatic vending machines. These connectors can be used alone by inserting wire-terminated crimp snap-in contacts into the housing. However, to achieve more positive contact mounting, plug and cap housings can be equipped with a double lock plate that helps to completely insert contacts. There are three contact centerline spacings available: 3.96 mm, 6.5 mm and 7.92 mm. Of these, the 7.92 mm centerline contact arrangement is for 2-position board-mounted headers. The mating wiremounted plug connector uses the second circuit of the 3-position 3.96 mm centerline housing with no contact loaded. Available with the 3.96 mm centerline contact arrangement are wire-mounted plug housings and the mating wire-mounted cap housings (for freehanging and panel mounted applications) and boardmounted tab headers. The 6.5 mm centerline contact arrangement is used in wire-mounted plug housings and the mating boardmounted tab headers. The plug housings are loaded with receptacle contacts and the cap housings with tab contacts. The tab headers for board mounting are preloaded with solder-dipping tab contacts with tail. Contacts accept two wire size ranges: 28-22 AWG (with insulation outer diameter of 1.3 to 2.0 mm) and 20-18 AWG (with insulation outer diameter of 2.0 to 3.1 mm). The tab header for board mounting has a locking mechanism where it is compatible with resin coating that is applied to the board for waterproof. It is designed to work with the plug locking function. The solder tail section of tab contact has kink feature. Interacting with the mounting boss with kink feature, the solder tab secures the header on the board firmly during soldering. Power Double Lock (PDL) Connectors .156 [3.96], .256 [6.50], .312 [7.92] and .512 [13.00] Centerlines R High Density circuit connectors of compact design Uses double lock plate on the wire side that helps prevent partial mating of contacts Double lock plate compatible with high-count positions of more than 3 rows Tab and receptacle contacts resist scooping of contacts at mating / unmating Locking of plug to cap housings and plug to boardmounted headers made by the semi-inner locking system that helps preclude the possibility of disengagement by external pressure Both wire-to-wire and wireto-board applications available from the same Series lineup Board-mounted header compatible with resin coating, causing no hindrance with the plug locking function Design complies with a range of safety standards The housing lance design provides no lance on contacts and helps prevent entanglement of contacts with one another Fully polarized The following contact centerline by row centerline arrangements available: * For wire-to-wire application: 3.96 mm x 4.6 mm 6.5 mm x 6.5 mm * For wire-to-board application: 3.96 mm x 4.6 mm 7.92 mm x 4.6 mm 6.5 mm x 6.5 mm Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 VDE Approved, File No. B 04 11 39175010 The double lock plate is compatible with high-count positions of more than 3 rows. Also, the housing lance design of this connector, featuring no lance on contacts, makes handling of the connector very easy, as there is minimal entanglement of contacts with one another. Performance Characteristics Voltage Rating--300 VAC (for 3.96 mm wire-to-wire, 6.5 mm wire-toboard and 7.92 mm wire-to-board applications) 50 VAC (for 3.96 mm wire-to-board application) Current Rating--14A max. (Based on initial t-rise vs. current testing using 16 AWG wire in a 2-position connector Fine Rating--1 mV, 1A min. Operating Temperature-- -30 ~ +105C Technical Documents Product Specifications 108-5410 108-5439 (SMT) Application Specification 114-5175 Instruction Sheet 411-5638 59 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Quick Reference Chart for Mating Part Numbers Quick Reference Chart Mating Connectors (Wire and PC Board Mount Side) Plug Connector (Wire Side) Housing High Density No. of Pos. Part No. Part No. of Applicable Double Lock Plate No. of Pos. 316770-1x1 1 2 Power Double Lock (PDL) Connectors .156 [3.96], .256 [6.50], .312 [7.92] and .512 [13.00] Centerlines 3.96 mm and 7.92 mm Centerline 1 316768- 2 177898- 177918-1x1 3 177899- 177919-1x1 4 (1 Row) 316501- 177920-1x1 2 4 4 (2 Rows) 177900- 177918-1x2 4 6 177901- 177919-1x2 6 8 177902- 177920-1x2 8 9 10 177903- 177904- 177919-1x3 177921-1x2 9 10 12 177905- 177920-1x3 12 316061-1x1 2 6.5 mm and 13.0 mm Centerline 2 1939344-1 3 3 179938- 316062-1x1 3 -- -- -- 2 4 (1 Row) 179939- 316063-1x1 4 (2 Rows) 179861- 316061-1x2 6 179862- 316062-1x2 6 12 917354- 353891-1x2 12 4 Part No. of Cap Housing and Tab Header Part No. of Applicable Double Lock Plate 316769- (Free-Hanging) 316770-1x1 179463- (Free-Hanging) 177918-1x1 177906- (Panel Mount) 179838- (PC Board Mount) -- 179464- (Free-Hanging) 177919-1x1 177907- (Panel Mount) 179839- (PC Board Mount) -- 179844- (PC Board Mount 7.92 mm Centerline) 316502- (Panel Mount) 177920-1x1 179465- (Free-Hanging) 177918-1x2 177908- (Panel Mount) 179840- (PC Board Mount) -- 179466- (Free-Hanging) 177919-1x2 177909- (Panel Mount) 179841- (PC Board Mount) -- 179467- (Free-Hanging) 177920-1x2 917845- (PC Board Mount) 177911- (Panel Mount) 177919-1x3 177912- (Panel Mount) 177921-1x2 177913- (Panel Mount) 177920-1x3 179843- (PC Board Mount) -- 1903720-1 (Free-Hanging) 177920-1x3 1939343-1 (Panel Mount) 179846- (PC Board Mount) 179944- (PC Board Mount/SMT) 917745- (PC Board Mount 13 mm Centerline) 9139343-1- (Panel Mount) 179847- (PC Board Mount) 179945- (PC Board Mount/SMT) 179848- (PC Board Mount) 1903486-1 (Panel Mount) 179849- (PC Board Mount) 1903487-1 (Panel Mount) 917353- (PC Board Mount) -- -- -- -- -- -- *For details on 6.5 mm and 13.0 mm Centerline products, contact Technical Support Note: All part numbers are RoHS Compliant. Note: All dimensions shown are metric. 60 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Contacts and Product Composition Contacts Material and Finish Pre-tinned copper alloy High Density Receptacle for Plug Housing, Tab for Cap Housing Receptacle Ins. Dia. (Note) AWG mm2 26-22 0.14~0.34 1.30~2.00 20-16 0.51~1.38 2.00~3.10 Contact Part No. Receptacle Strip Form 177914-1 177914-2* 177915-1 177915-2* Loose Piece 179592-1 179592-2* 179593-1 179593-2* Tab Applicator Part No. CERTI-CRIMP II Hand Tool Part No. Strip Form Loose Piece 177916-1 179594-1 680283-X 91567-1 177917-1 179595-1 680286-X 91569-1 Power Double Lock (PDL) Connectors .156 [3.96], .256 [6.50], .312 [7.92] and .512 [13.00] Centerlines Wire Range Tab Note: Maximum diameter is 2.8 mm when Double Lock Plate is used. *Part Number suffix -2 represents high contact pressure type. Extraction Tool P/N : 234912-1 (For receptacle contact) 234914-1 (For tab contact) Note: Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Number. Positive mounting achieved with Double Lock mechanism. Product Composition Contact is partially-mounted. Double Lock Plate is set. Power Double Lock Connector is composed of the components listed below: Tab and receptacle contacts Free-hanging plug housing Free-hanging cap housing Panel mount cap housing PC Board-mount tab header Double Lock Plate Contact is fully pushed in as Double Lock Plate is pressed. Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 61 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 3.96 mm Centerline Free-Hanging Plug Housing 1 Circuit Wire-to-Wire Material--UL94V-0, 6/6 Nylon High Density Part Number 316768-1 (Natural) 316768-2 (Red) 316768-4 (Yellow) 316768-6 (Blue) 316768-9 (Black) Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Free-Hanging)--pages 65-66 Double Lock Plate--page 71 Section X-X Power Double Lock (PDL) Connectors .156 [3.96] Centerlines 2 Circuits Wire-to-Board and Wire-to-Wire Material--UL94V-0, 6/6 Nylon Part Number 177898-1 (Natural) 177898-2 (Red) 177898-4 (Yellow) 177898-6 (Blue) 177898-9 (Black) Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Free-Hanging)--pages 65-66 (Panel Mount)--pages 67-70 Double Lock Plate--page 71 Mating Tab Headers-- pages 72-74 Lock Type II--3-177898-1 (Natural) Section X-X 3 Circuits Wire-to-Board and Wire-to-Wire Material--UL94V-0, 6/6 Nylon Part Number 177899-1 (Natural) 177899-2 (Red) 177899-4 (Yellow) 177899-6 (Blue) 177899-9 (Black) Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Free-Hanging)--pages 65-66 (Panel Mount)--pages 67-70 Double Lock Plate--page 71 Mating Tab Headers-- pages 72-74 and (2 circuit, 7.92 mm centerline)--page 74 Lock Type II--3-177899-1 (Natural) Section X-X 4 Circuits (1 Row) Wire-to-Wire Material--UL94V-0, 6/6 Nylon Part Number 316501-1 (Natural) 316501-4 (Yellow) 316501-6 (Blue) Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Panel Mount)--pages 67-70 Double Lock Plate--page 71 Lock Type II--3-316501-1 (Natural) Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. Section X-X 62 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 3.96 mm Centerline Free-Hanging Plug Housing 4 Circuits (2 Rows) Wire-to-Board and Wire-to-Wire Part Number 177900-1 (Natural) 177900-4 (Yellow) 177900-6 (Blue) High Density Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Free-Hanging)--pages 65-66 (Panel Mount)--pages 67-70 Double Lock Plate--page 71 Mating Tab Headers-- pages 72-74 Material UL94V-0, 6/6 Nylon Lock Type II 3-177900-1 (Natural) Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Section X-X 6 Circuits Wire-to-Board and Wire-to-Wire Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Free-Hanging)--pages 65-66 (Panel Mount)--pages 67-70 Double Lock Plate--page 71 Mating Tab Headers-- pages 72-74 Material UL94V-0, 6/6 Nylon Part Number 177901-1 (Natural) 177901-4 (Yellow) 177901-6 (Blue) Lock Type II 3-177901-1 (Natural) Section X-X 8 Circuits Wire-to-Board and Wire-to-Wire Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Free-Hanging)--pages 65-66 Double Lock Plate--page 71 Mating Tab Headers--pages 72-74 Material UL94V-0, 6/6 Nylon Part Number 177902-1 (Natural) 177902-4 (Yellow) 177902-6 (Blue) Lock Type II 3-177902-1 (Natural) Section X-X Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 63 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 3.96 mm Centerline Free-Hanging Plug Housing 9 Circuits Wire-to-Wire Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Panel Mount)--pages 67-70 Double Lock Plate--page 71 High Density Material UL94V-0, 6/6 Nylon Part Number 177903-1 (Natural) 177903-4 (Yellow) 177903-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Lock Type II 3-177903-1 (Natural) Section X-X 10 Circuits Wire-to-Wire Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Panel Mount)--pages 67-70 Double Lock Plate--page 71 Material UL94V-0, 6/6 Nylon Part Number 177904-1 (Natural) 177904-4 (Yellow) 177904-6 (Blue) Section X-X 12 Circuits Wire-to-Board and Wire-to-Wire Related Product Data Receptacle Contacts--page 61 Mating Cap Housings (Panel Mount)--pages 67-70 Double Lock Plate--page 71 Mating Tab Headers--pages 72-74 Material UL94V-0, 6/6 Nylon Part Number 177905-1 (Natural) 177905-4 (Yellow) 177905-6 (Blue) Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. Section X-X 64 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) 3.96 mm Centerline Free-Hanging Cap Housing 1 Circuit Wire-to-Wire Part Number 316769-1 (Natural) 316769-2 (Red) 316769-4 (Yellow) 316769-6 (Blue) 316769-9 (Black) High Density Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Material UL94V-0, 6/6 Nylon Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Section X-X 2 Circuits Wire-to-Wire Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Material UL94V-0, 6/6 Nylon Part Number 179463-1 (Natural) 179463-2 (Red) 179463-4 (Yellow) 179463-6 (Blue) 179463-9 (Black) Section X-X 3 Circuits Wire-to-Wire Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Material UL94V-0, 6/6 Nylon Part Number 179464-1 (Natural) 179464-2 (Red) 179464-4 (Yellow) 179464-6 (Blue) 179464-9 (Black) Note: All dimensions shown are metric. Section X-X Note: All part numbers are RoHS Compliant. 65 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Free-Hanging Cap Housing 4 Circuits (2 Rows) Wire-to-Wire Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 High Density Material UL94V-0, 6/6 Nylon Part Number 179465-1 (Natural) 179465-4 (Yellow) 179465-6 (Blue) Section X-X Power Double Lock (PDL) Connectors .156 [3.96] Centerlines 6 Circuits Wire-to-Wire Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Material UL94V-0, 6/6 Nylon Part Number 179466-1 (Natural) 179466-4 (Yellow) 179466-6 (Blue) Section X-X 8 Circuits Wire-to-Wire Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Material UL94V-0, 6/6 Nylon Part Number 179467-1 (Natural) 179467-4 (Yellow) 179467-6 (Blue) Section X-X 12 Circuits 26.1 Circuit # Wire-to-Board Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Material UL94V-0, 6/6 Nylon Part Number 1903720-1 (Natural) 17.86 12 17.8 +0.15 -0 4.6 Centerline Note: All dimensions shown are metric. 3.96 Centerline Note: All part numbers are RoHS Compliant. Section X-X 66 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 2 Circuits Wire-to-Wire Material--UL94V-0, 6/6 Nylon High Density Part Number 177906-1 (Natural) 177906-2 (Red) 177906-4 (Yellow) 177906-6 (Blue) 177906-9 (Black) Panel Cutout (Applicable Board Thickness: 0.8~2.0 mm) Panel Mounting Direction Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Section X-X 3 Circuits Wire-to-Wire Material--UL94V-0, 6/6 Nylon Part Number 177907-1 (Natural) 177907-2 (Red) 177907-4 (Yellow) 177907-6 (Blue) 177907-9 (Black) Panel Cutout (Applicable Board Thickness: 0.8~2.0 mm) Panel Mounting Direction Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Section X-X 4 Circuits (1 Row) Wire-to-Wire Material--UL94V-0, 6/6 Nylon Part Number 316502-1 (Natural) 316502-4 (Yellow) 316502-6 (Blue) Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Panel Cutout (Applicable Board Thickness: 0.8~2.0 mm) Panel Mounting Direction Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. Section X-X 67 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 4 Circuits (2 Rows) Wire-to-Wire High Density Material UL94V-0, 6/6 Nylon Part Number 177908-1 (Natural) 177908-4 (Yellow) 177908-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Panel Cutout (Applicable Board Thickness: 0.82.0 mm) Panel Mounting Direction Section X-X 6 Circuits Wire-to-Wire Material UL94V-0, 6/6 Nylon Part Number 177909-1 (Natural) 177909-4 (Yellow) 177909-6 (Blue) Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Panel Cutout (Applicable Board Thickness: 0.82.0 mm) Panel Mounting Direction Section X-X Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 68 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 9 Circuits Wire-to-Wire Material UL94V-0, 6/6 Nylon High Density Part Number 177911-1 (Natural) 177911-4 (Yellow) 177911-6 (Blue) Panel Cutout (Applicable Board Thickness: 0.82.0 mm) Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Panel Mounting Direction Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Section X-X For 10 Circuits Wire-to-Wire Material UL94V-0, 6/6 Nylon Part Number 177912-1 (Natural) 177912-4 (Yellow) 177912-6 (Blue) 10.85 Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 8.1 Panel Cutout (Applicable Board Thickness: 0.82.0 mm) Panel Mounting Direction Note: All dimensions shown are metric. Section X-X Note: All part numbers are RoHS Compliant. 69 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 12 Circuits Wire-to-Wire High Density Material UL94V-0, 6/6 Nylon Part Number 177913-1 (Natural) 177913-4 (Yellow) 177913-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Tab Contacts--page 61 Mating Plug Housings (Free-Hanging)--pages 62-64 Double Lock Plate--page 71 Panel Cutout (Applicable Board Thickness: 0.82.0 mm) Panel Mounting Direction Section X-X Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 70 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) 3.96 mm Centerline Double-Lock Plates Double Lock Plates For 1 Circuit For 2 Circuits For 3 Circuits Material UL94V-0, glass filled 6/6 Nylon, natural color High Density Part Number 316770-1 (1 Pos.) 177918-1 (2 Pos.) 177919-1 (3 Pos.) 177920-1 (4 Pos.) 177921-1 (5 Pos.) For 4 Circuits No. of Pos. 1 2 3 4 (1 Row) 4 (2 Rows) 6 8 9 10 12 For 5 Circuits Applicable Housing Part No. Cap Housing Free-Hanging Panel Mount 316768- 316769- ---- 177898- 179463- 177906- 177899- 179464- 177907- 316501- ---- 316502- 177900- 179465- 177908- 177901- 179466- 177909- 177902- 179467- ---- 177903- ---- 177911- 177904- ---- 177912- 177905- ---- 177913- Plug Housing Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Plug Housings--pages 62-64 Cap Housings --pages 65-70 Double Lock Plate Part Number 316770-1 177918-1 177919-1 177920-1 177918-1 177919-1 177920-1 177919-1 177921-1 177920-1 (1 (2 (3 (4 (2 (3 (4 (3 (5 (4 Pos.) Pos.) Pos.) Pos.) Pos.) Pos.) Pos.) Pos.) Pos.) Pos.) Required Qty. 1 1 1 1 2 2 2 3 2 3 Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 71 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board) 3.96 mm Centerline for PC Board Mount Tab Header, Vertical 2 Circuits Wire-to-Board High Density Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Part Number 179838-1 (Natural) 179838-2 (Red) 179838-4 (Yellow) 179838-6 (Blue) 179838-9 (Black) Section X-X Section Y-Y Tube (53 ea.)--316299- Related Product Data Mating Plug Housing (Free-Hanging)--pages 62-64 *Extent of resin coating PC Board Layout (Applicable Board Thickness: 1.6 mm) 3 Circuits Wire-to-Board Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Part Number 179839-1 (Natural) 179839-2 (Red) 179839-4 (Yellow) 179839-6 (Blue) 179839-9 (Black) Section X-X Section Y-Y Related Product Data Mating Plug Housing (Free-Hanging)--pages 62-64 PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 72 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board) (Continued) 3.96 mm Centerline for PC Board Mount Tab Header, Vertical (Continued) 4 Circuits (2 Rows) Wire-to-Board Part Number 179840-1 (Natural) 179840-4 (Yellow) 179840-6 (Blue) Section X-X Section Y-Y Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Mating Plug Housings (Free-Hanging)--pages 62-64 High Density Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon. Contact--Copper alloy, Tin plated PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating 6 Circuits Wire-to-Board Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon. Contact--Copper alloy, Tin plated Part Number 179841-1 (Natural) 179841-4 (Yellow) 179841-6 (Blue) Section X-X Section Y-Y Related Product Data Mating Plug Housings (Free-Hanging)--pages 62-64 PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating 8 Circuits Wire-to-Board Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon. Contact--Copper alloy, Tin plated Part Number 917845-1 (Natural) 917845-4 (Yellow) 917845-6 (Blue) Section X-X Related Product Data Mating Plug Housings (Free-Hanging)--pages 62-64 Section Y-Y PC Board Layout (Applicable Board Thickness: 1.6 mm) Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. *Extent of resin coating Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 73 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board) (Continued) 3.96 mm Centerline for PC Board Mount Tab Header, Vertical 12 Circuits Wire-to-Board High Density Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Part Number 179843-1 (Natural) 179843-4 (Yellow) 179843-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.96] and .312 [7.92] Centerlines Related Product Data Mating Plug Housings (Free-Hanging)--pages 62-64 Section X-X Section Y-Y PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating 3.96 mm Centerline (2 Pos. = 7.92 mm Centerline) for PC Board Mount Tab Header, Vertical 2 Circuits Wire-to-Board Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Part Number With kink 179844-1 (Natural) 179844-2 (Red) 179844-4 (Yellow) 179844-6 (Blue) 179844-9 (Black) Without kink 9-179844-1 (Natural) 9-179844-6 (Blue) Section X-X Related Product Data Mating 3-Circuit Plug Housings (Free-Hanging)--page 62 PC Board Layout (Applicable Board Thickness: 1.6 mm) Section Y-Y *Extent of resin coating Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 74 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 6.5 mm Centerline Free-Hanging Plug Housing 2 Circuits 12.5 0.1 Wire-to-Board 17.2 0.1 Related Product Data Receptacle Contacts--page 61 Double Lock Plate--page 77 Mating Tab Headers--pages 79-81 Material UL 94V-0, 6/6 Nylon Circuit # High Density Part Number 1939344-1 (Natural) 1.35 REF 6.45 REF 4.1 +0.1 -0 6.5 Centerline 20.6 +0.25 -0 0.85 +0.1 -0.03 3 Circuits Wire-to-Board Material UL 94V-0, 6/6 Nylon Power Double Lock (PDL) Connectors .256 [6.50] Centerlines Related Product Data Receptacle Contacts--page 61 Double Lock Plate--page 77 Mating Tab Headers--pages 79-81 Part Number 179938-1 (Natural) 179938-2 (Red) 179938-4 (Yellow) 179938-6 (Blue) 179938-9 (Black) 4 Circuits (1 Row) Wire-to-Board Related Product Data Receptacle Contacts--page 61 Double Lock Plate--page 77 Mating Tab Headers--pages 79-81 Material UL 94V-0, 6/6 Nylon Part Number 179939-1 (Natural) 179939-4 (Yellow) 179939-6 (Blue) 179939-9 (Black) 4 Circuits (2 Rows) Wire-to-Board Related Product Data Receptacle Contacts--page 61 Double Lock Plate--page 77 Mating Tab Headers--pages 79-81 Material UL 94V-0, 6/6 Nylon Housing Lock Type B Part Number Housing Lock Type A 179861-1 (Natural) 179861-4 (Yellow) 179861-6 (Blue) Housing Lock Type B 2-179861-1 (Natural) 2-179861-4 (Yellow) 2-179861-6 (Blue) Section X-X Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 75 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 6.5 mm Centerline Free-Hanging Plug Housing 6 Circuits Housing Lock Type B Wire-to-Board High Density Material UL 94V-0, 6/6 Nylon Part Number Housing Lock Type A 179862-1 (Natural) 179862-4 (Yellow) 179862-6 (Blue) Power Double Lock (PDL) Connectors .256 [6.50] Centerlines Housing Lock Type B 2-179862-1 (Natural) 2-179862-4 (Yellow) 2-179862-6 (Blue) Related Product Data Receptacle Contacts--page 61 Double Lock Plate--page 77 Mating Tab Headers--pages 79-81 Section X-X 12 Circuits Housing Lock Type B Wire-to-Board Material UL 94V-0, 6/6 Nylon. Part Number Housing Lock Type A 917354-1 (Natural) Housing Lock Type B 2-917354-1 (Natural) Related Product Data Receptacle Contacts--page 61 Double Lock Plate--page 77 Mating Tab Headers--pages 79-81 Section X-X Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 76 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 6.5 mm Centerline Double-Lock Plates Material UL94V-0, glass filled 6/6 Nylon, natural color For 2 Circuits For 3 Circuits Wire-to-Board Wire-to-Board High Density Part Number 316061-1 (2-Circuits) 316062-1 (3-Circuits) 316063-1 (4-Circuits) 353891-1 (6-Circuits) Related Product Data Plug Housings (Free-Hanging)--pages 75-76 Power Double Lock (PDL) Connectors .256 [6.50] Centerlines For 4 Circuits Wire-to-Board For 6 Circuits Wire-to-Board No. of Pos. Applicable Plug Housing Part No. 3 4 (1 Row) 4 (2 Rows) 6 12 179938- 179939- 179861- 179862- 917354- Double Lock Plate Part Number 316062-1 316063-1 316061-1 316062-1 353891-1 Required Qty. 1 1 2 2 2 Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 77 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline Panel Mount Cap Housing 26.1 (9.6) (4.2) 2.1 2 Circuits 10.4 0.13 Wire-to-Wire 10.35 0.13 High Density Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated 12.5 7.8 0.13 8.4 0.13 12 Part Number 1939343-1 (Natural) (2.45) 9.2 Power Double Lock (PDL) Connectors .256 [6.50] Centerlines 7.1 Pitch 6.5 4 Circuits 26.1 (9.6) (4.2) 12.8 0.13 10.4 0.13 Wire-to-Wire Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated (2.1) 16.1 0.13 12.5 10.1 0.13 13.15 0.13 Part Number 1903486-1 (Natural) 12.8 0.13 1.35 0.13 18.3 0.13 12 (2.45) 15.8 Pitch 6.5 13.6 Pitch 6.5 6 Circuits (9.6) (4.2) Wire-to-Wire 19.3 0.13 (2.1) 10.4 0.13 Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated 16.1 0.13 10.1 0.13 19 13.15 0.13 Part Number 1903487-1 (Natural) 1.35 0.13 19.3 0.13 24.85 0.13 12 (2.45) 15.8 Pitch 6.5 Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 13.6 Pitch 6.5 26.1 13 78 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline (2 Pos.=13 mm Centerline) PC Board Mount Tab Header, Vertical 3 Circuits Wire-to-Board Section Y-Y Section X-X Part Number 179846-1 (Natural) 179846-4 (Yellow) 179846-6 (Blue) PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating 2 Circuits (13 mm Centerline) Wire-to-Board Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Section X-X Section Y-Y Part Number 917745-1 (Natural) 917745-4 (Yellow) 917745-6 (Blue) Tube (26 ea.)--917746- Related Product Data Mating 3-Circuit Plug Housings (Free-Hanging)--page 75 PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating 4 Circuits (1 Row) Wire-to-Board Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Part Number 179847-1 (Natural) 179847-4 (Yellow) 179847-6 (Blue) Section Y-Y Section X-X Related Product Data Mating Plug Housings (Free-Hanging)--pages 75-76 PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 79 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Power Double Lock (PDL) Connectors .256 [6.50] and .512 [13.00] Centerlines Related Product Data Mating Plug Housings (Free-Hanging)--pages 75-76 High Density Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline PC Board Mount Tab Header, Vertical 4 Circuits (2 Rows) Wire-to-Board High Density Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Power Double Lock (PDL) Connectors .256 [6.50] Centerlines Part Number 179848-1 (Natural) 179848-4 (Yellow) 179848-6 (Blue) Tube (40 ea.)--917747- Section X-X Section Y-Y Related Product Data Mating Plug Housings (Free-Hanging)--pages 75-76 PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating 6 Circuits Wire-to-Board Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Part Number 179849-1 (Natural) 179849-4 (Yellow) 179849-6 (Blue) Section X-X Section Y-Y Related Product Data Mating Plug Housings (Free-Hanging)--pages 75-76 PC Board Layout (Applicable Board Thickness: 1.6 mm) *Extent of resin coating Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 80 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline PC Board Mount Tab Header, Vertical 12 Circuits Wire-to-Board Section X-X Section Y-Y Power Double Lock (PDL) Connectors .256 [6.50] Centerlines Part Number With Boss, With kink 917353-1 (Natural) Without Boss, Without kink 3-917353-1 (Natural) High Density Material and Finish Housing--UL 94V-0, glass filled 6/6 Nylon Contact--Copper alloy, Tin plated Related Product Data Mating Plug Housings (Free-Hanging)--pages 75-76 *Extent of resin coating PC Board Layout (Applicable Board Thickness: 1.6 mm) Note: All dimensions shown are metric. Note: All part numbers are RoHS Compliant. 81 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Engineering Notes 82 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used on the power supply wiring Fully polarized to provide proper plug-to-cap mating incorporating a positive locking mechanism to help prevent accidental disengagement of mated connectors. Also facilitates panel mounting Free-hanging or panel mount Housings available in 1, 2, 3, 4, 6, 9, 12 and 15 circuit configuration for wire-towire connection Connectors can be mounted to .031-.079 [0.79-2.00] thick panels Printed circuit board pin headers are available in 2 thru 24 circuit vertical and right-angle configurations Hermaphroditic housings available in 2, 3 and 4 circuits for free-hanging applications Low insertion/extraction forces Contacts accept wire size range 30-16 AWG [.05-1.2 mm2] Performance Characteristics Technical Documents The Mini-Universal MATE-N-LOK Connector performance characteristics found on pages 83-84 are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. Product Specifications 108-1542 Mini-Universal MATE-N-LOK Connectors 108-1543 Mini-Universal MATE-N-LOK Headers 108-5151 Mini-Universal MATE-N-LOK Connectors (UL94V-2) 108-5138 Mini-Universal MATE-N-LOK Connectors (UL94V-0) Low Level Termination Resistance 20 milliohms max. total resistance between wire crimps of a mated pin and socket Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline High Density Application Specification 114-16017 Mini-Universal MATE-N-LOK Connectors Instruction Sheets 408-3234 Mini-Universal MATE-N-LOK Connectors 411-5105 Mini-Universal MATE-N-LOK Connectors Dielectric Withstanding Voltage-- 1.5 KVAC between adjacent circuits Test probe contacts available .163 [4.14] centerline spacing Not for interrupting current Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Insulation Resistance-- 1000 megohms minimum between adjacent circuits Voltage Rating--600 V AC or DC Contact Retention--8 lb. min. per contact Durability--20 cycles, mating and unmating R Certified by Canadian Standards Association, File No. LR 7189 R 83 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Performance Characteristics (Continued) High Density Maximum Current--Maximum current rating of Mini-Universal MATE-N-LOK connectors is limited by the maximum operating temperature of the housings which is 105C including the temperature rise of the contacts which is a maximum of 30C. There are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. These variables are: Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Wire Size--Larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. Longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. Current Rating Verification for 30C Maximum Temperature Rise 100% Energized Wire-to-Wire Mini-Universal MATE-N-LOK Connectors -- Calculated Current Table Number of Circuits 16 18 20 Wire AWG 22 24 26 30 2 3 4 6 9 12 15 9.50 8.50 8.00 7.00 6.00 6.00 5.50 9.00 8.00 7.00 6.50 5.50 5.50 5.00 7.50 7.00 6.00 5.50 4.50 4.50 4.00 6.00 5.50 5.00 4.50 4.00 3.50 3.50 5.00 4.50 4.50 4.00 3.50 3.00 3.00 4.00 4.00 3.50 3.00 3.00 2.50 2.50 3.00 3.00 2.50 2.50 2.00 2.00 2.00 Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a connector family. All applications should be tested by the end user. The values listed are per circuit, for fully loaded housings being 100% energized. Note: All combinations above were not tested and this chart contains interpolated and extrapolated values. Connector Size--In general, the more circuits in a connector, the less current can be carried. Ambient Temperature--The higher the ambient temperature, the less current can be carried in any given connector. Minimum Wire Lengths for T-Rise vs. Current Testing AWG 30 28 26 24 20 Printed Wiring Board Conductor Size--The finished trace conductor width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation. Mini-Universal MATE-N-LOK connectors also will withstand the following tests: Housing Panel Retention-- 26 lb. min. Housing Lock Strength--9 lb. min. Thermal Shock-- -55C to +105C Temperature-Humidity Cycling-- 25C to 65C at 95 RH Vibration--10-55-10 cycles per minute at .06 inch total excursion Physical Shock--18 drops, 50 G half-sine at 11 milliseconds Min. Length (in.) 2.6 3.2 4.1 5.1 7.8 AWG 18 16 14 12 10 Min. Length (in.) 9.4 11.3 13.7 16.4 19.3 Note: If wire lengths used are less than those listed above, the currentcarrying ability of the system will be reduced due to less heat being conducted away from the connector. The customer should fully test all applications. Wire-to-Board Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire value should be used. The chart values are only a tool for connector selection and will require the customer to fully test their application. Termination Resistance/Contact Crimp Tensile Force Wire Size AWG mm2 30 28 26 24 22 20 18 16 .05 .08 .12 .2 .3 .5 .8 1.2 Termination Resistance Test Resistance Current Milliohms (Amps) (Max. Init.) -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Contact Crimp Tensile Force Force (Min.) lbs. N -- -- -- -- 4 18 7 31 11 49 13 58 15 67 18 80 84 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Mini-Universal MATE-N-LOK Connector Mating Combinations Connector Part Number Number of Circuits Flammability Rating Style Plug1 Housing Part No. Cap1 Housing Part No. UL94V-2 In-Line 172335-1 172327-14 UL94V-0 In-Line 172164-1 1 UL94V-2 In-Line UL94V-0 In-Line 172159-12 794805-17 172339-1 794939-12,7 172331-12 172168-1 172160-12 794895-17 794940-12,7 794894-17 172808-13 UL94V-2 In-Line UL94V-0 In-Line UL94V-2 Dual Row UL94V-0 Dual Row 3 173957-13 4 6 8 9 10 12 14 172337-1 UL94V-2 Dual Row UL94V-0 Dual Row UL94V-0 Dual Row 172166-1 770579-1 -- 794941-12,7 172332-12 172161-12 UL94V-2 Matrix 794821-17 172340-1 UL94V-0 Matrix 172169-1 UL94V-0 Dual Row UL94V-2 770580-1 -- Matrix 794781-17 172341-1 794942-12,7 172333-12 Matrix 172170-1 172162-12 Dual Row 770581-1 -- Dual Row 770582-1 -- UL94V-0 UL94V-0 UL94V-2 Matrix 172342-1 172334-12 UL94V-0 Matrix 172171-1 172163-12 16 UL94V-0 Dual Row 770583-1 -- 18 UL94V-0 Dual Row 770584-1 -- 20 UL94V-0 Dual Row 770585-1 -- 22 UL94V-0 Dual Row 770586-1 -- 24 UL94V-0 Dual Row 770587-1 -- 15 Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline 172167-1 172165-1 -- Tin6 Duplex5 -- -- -- -- Tin6 Duplex5 Tin/Duplex -- Tin Duplex5 -- Tin Duplex5 -- -- -- Tin Duplex5 Tin/Duplex -- Tin Duplex5 Tin/Duplex Tin Duplex5 Tin/Duplex -- Tin Duplex5 Tin Duplex5 Tin/Duplex -- Tin Duplex5 Tin Duplex5 Tin Duplex5 -- Tin Duplex5 Tin Duplex5 Tin Duplex5 Tin Duplex5 Tin Duplex5 Tin Duplex5 Right-Angle With Board Lock -- 1-794374-0 1-794374-1 -- -- -- -- 1-770966-0 1-770966-1 1-770966-1 -- -- -- -- 1-770967-0 1-770967-1 -- -- -- 1-770968-0 1-770968-1 1-770968-1 -- 1-770969-0 1-770969-1 1-770969-1 1-770970-0 1-770970-1 1-770970-1 -- -- -- 1-770971-0 1-770971-1 1-770971-1 -- -- -- 1-770972-0 1-770972-1 1-770973-0 1-770973-1 -- -- -- 1-770974-0 1-770974-1 1-794105-0 1-794105-1 1-794106-0 1-794106-1 1-794107-0 1-794107-1 1-794108-0 1-794108-1 High Density 172809-13 172338-1 173958-13 172336-1 172807-13 173956-13 2 172156-14 172328-12 172343-14 172807-13 173956-13 172157-12 172233-14 794896-12,7 172808-13 172329-12 172344-14 173957-13 172158-12 172234-14 172809-13 172330-12 173958-13 Plating Mating Connector Part Number PC Board Pin Headers Vertical With Without Blindmate Drain Holes Drain Holes -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1-770166-0 1-770872-0 -- 1-770166-1 1-770872-1 -- 1-770166-1 1-770872-1 -- -- -- -- -- -- -- -- -- -- -- -- -- 1-770170-0 1-770873-0 -- 1-770170-1 1-770873-1 -- -- -- -- -- -- -- -- -- -- 1-770174-0 1-770874-0 1-794325-0 1-770174-1 1-770874-1 1-794325-1 1-770174-1 1-770874-1 -- -- -- -- 1-770178-0 1-770875-0 1-794326-0 1-770178-1 1-770875-1 1-794326-1 1-770178-1 1-770875-1 -- 1-794065-0 1-794073-0 1-794327-0 1-794065-1 1-794073-1 1-794327-1 1-794065-1 1-794073-1 -- -- -- -- 1-770182-0 1-770876-0 1-794432-0 1-770182-1 1-770876-1 1-794432-1 1-770743-0 1-770858-0 1-794328-0 1-770743-1 1-770858-1 1-794328-1 1-770743-1 1-770858-1 -- -- -- -- 1-770186-0 1-794040-0 1-794329-0 1-770186-1 1-794040-1 1-794329-1 1-794066-0 1-770621-0 -- 1-794066-1 1-770621-1 -- 1-794067-0 1-794074-0 -- 1-794067-1 1-794074-1 -- -- -- -- 1-770190-0 1-770859-0 1-794330-0 1-770190-1 1-770859-1 1-794330-1 1-794068-0 1-794075-0 -- 1-794068-1 1-794075-1 -- 1-794069-0 1-794076-0 -- 1-794069-1 1-794076-1 -- 1-794070-0 1-794077-0 -- 1-794070-1 1-794077-1 -- 1-794071-0 1-794078-0 -- 1-794071-1 1-794078-1 -- 1-794072-0 1-794079-0 -- 1-794072-1 1-794079-1 -- 1Mini-Universal MATE-N-LOK plug and cap housings accept pin or socket contacts. Use the appropriate contacts in the plug housing as required by the mating connector. All Plugs are free-hanging and Caps are free-hanging or panel mount, unless otherwise noted. 2Panel mount only. 3Hermaphroditic: Mates to itself. 4Free-hanging only. 5Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 6Tin Finish -- Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact. 7For Splash-Proof Sealing. Note: All part numbers are RoHS Compliant. 85 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Contacts .6592 [16.74] .6712 [17.04] Pin diameter .039 [0.99] Material High Density Brass or Phosphor bronze Stock Thickness .008 [0.20] These contacts are to be used in MiniUniversal MATE-N-LOK Plug or Cap housings only. Pin Wire Size Ins. Dia. Range Range AWG [mm2] Related Product Data Product Specifications 108-1542 Mini-Universal MATE-N-LOK Connectors 108-1543 Mini-Universal MATE-N-LOK Headers Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Application Specification 114-16017 Mini-Universal MATE-N-LOK Connectors Performance Characteristics-- pages 83-84 Housings -- pages 87-89 Technical Documents-- pages 83 and 205-206 Application Tooling-- pages 207210 30 -26 [.05 -.12] .035 -.050 .889 -1.27 26 -22 [.12 -.3] .047 -.069 1.19 -1.75 22 -18 [.3 -.8] or 22 x (2) [.3] .059 -.094 1.50 -2.39 or .067 x (2) 3.38 20-16 [.5-1.2] or 20 x (2) [.5] .079 -.126 2.01-3.20 or .075 x (2) 1.91 Socket Contact Part Numbers Pin Socket Material and Finish Strip Form Brass, Pre-tin 770835-1 Phos. Brz., Pre-tin -- Brass, Duplex1 1-770835-0 Phos. Brz., Duplex1 -- Brass, Pre-tin 770901-1 Phos. Brz., Pre-tin -- Brass, Duplex1 1-770901-0 Phos. Brz., Duplex1 -- Brass, Pre-tin 770903-1 Phos. Brz., Pre-tin -- Brass, Duplex1 1-770903-0 Phos. Brz., Duplex1 -- Brass, Pre-tin 794406-12 Phos. Brz., Pre-tin -- Brass, Duplex1 1-794406-02 Phos. Brz., Duplex1 -- Loose Pieces 794059-1 -- 1-794059-0 -- 770985-1 -- 1-770985-0 -- 770987-1 -- 1-770987-0 -- 171638-12 -- -- -- Strip Form 770834-1 770834-4 1-770834-0 1-770834-1 770902-1 770902-4 1-770902-0 1-770902-1 770904-1 770904-4 1-770904-0 1-770904-1 794407-12 794407-42 1-794407-02 1-794407-12 Loose Pieces 794058-1 -- 1-794058-0 -- 770986-1 -- 1-770986-0 -- 770988-1 -- 1-770988-0 -- 171639-12 -- -- -- HDM Hand Applicator Tool Part No. Part No. 567418-13 3 567418-2 567418-33 90717-2 567066-34 567066-44 567066-54 91529-1 567067-13 567067-23 567067-33 91522-1 680582-23 680582-33 91536-1 Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area over .000050 [.00127] min. nickel underplate on entire contact. 2 .671 [17.04] and .659 [16.74] dimensions are .689 [17.50] for indicated part numbers. 3 HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-ELECTRIC Model G Machine. See pages 207-210 for further information. 4 HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information. Note: All part numbers are RoHS Compliant. 1 Keying Plug 1.004 [2.55] Material UL94V-0 Nylon, white color Part Number 174670-1 Test Probe Contact 1.378 [35.00] Material and Finish Phosphor bronze, nickel plated Part Number 172971-1 Notes: 1. The test probe is inserted into the housing in the same direction as indicated by the arrow shown to the right. 2. The test probe can be used in the Cap or Plug Housing. 3. Test probes are supplied unassembled. Contact Extraction Tool No. 189727-1 IS 408-4118 Contact Insertion Tool (For inserting contacts applied to small diameter wire) No. 91002-1 IS 408-7347 86 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Housings 1 Circuit, Free-Hanging Free-Hanging or Panel Mount .933 [23.70] .163 [4.14] Centerline spacing Related Product Data .110 [2.79] .933 [23.70] .110 [2.79] .323 [8.20] .272 [6.91] .220 [5.59] .220 [5.59] .110 [2.79] Plug .110 [2.79] 2 and 3 Circuit, In-Line .933 .933 [2.37] [23.70] .220 [5.59] .220 [5.59] [.559] .110 [2.79] [.279] .163 [.414] [4.14] .163 [4.14] A A B B Cap High Density .933 [23.70] .110 [2.79] C Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Product Specifications 108-1542 Mini-Universal MATE-N-LOK Connectors 108-1543 Mini-Universal MATE-N-LOK Headers 108-5151 Mini-Universal MATE-N-LOK Connectors (UL94V-2) 108-5138 Mini-Universal MATE-N-LOK Connectors (UL94V-0) Performance Characteristics-- pages 83-84 Contacts -- page 86 Keying Plug -- page 86 Test Probe Contact -- page 86 Panel Cutout Recommendations-- page 89 Technical Documents-- pages 83 and 205-206 Mating Headers -- pages 90-92 .220 [5.59] .220 [5.59] Cap (Free-Hanging) Plug .220 [5.59] .933 [23.70] .110 [2.79] .163 [4.14] A D Cap (Panel Mount) Number of Circuits 1 2 3 A Dimensions B C -- -- -- .386 .425 .488 9.80 10.79 12.39 .551 .591 .654 14.00 15.01 16.61 D -- .464 11.78 .630 16.00 Housing Part Numbers1 UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Cap Cap Plug Plug Panel Mount Free-Hanging Panel Mount Free-Hanging 172164-1 -- 172156-1 172335-1 -- 172327-1 172165-1 172157-1 172233-1 172336-1 172328-1 172343-1 172166-1 172158-1 172234-1 172337-1 172329-1 172344-1 Note: All part numbers are RoHS Compliant. 4 and 6 Circuit, Dual Row .933 [23.70] .386 .386 [9.80] [9.80] A .933 [23.70] A .465 [11.81] .465 [11.81] .163 [4.14] Plug Number of Circuits 4 6 A Dim. .386 9.80 .551 14.00 .163 [4.14] Cap Housing Part Numbers1 UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Plug Cap Plug Cap 172167-1 172159-1 172338-1 172330-1 172168-1 172160-1 172339-1 172331-1 1Housing part numbers shown in both charts (above) are also available in other colors: Red, Green, Blue, Black. To order connectors in these colors use the appropriate dash numbers as follows: Red 1-XXXXXX-2, Green 1-XXXXXX-5, Blue 1-XXXXXX-6, Black 1-XXXXXX-9 Note: All part numbers are RoHS Compliant. 87 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Housings 9, 12 and 15 Circuit, Free-Hanging or Panel Mount, Matrix .163 [4.14] Centerline spacing .933 [23.69] Related Product Data Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline High Density Product Specifications 108-1542 Mini-Universal MATE-N-LOK Connectors 108-1543 Mini-Universal MATE-N-LOK Headers 108-5151 Mini-Universal MATE-N-LOK Connectors (UL94V-2) 108-5138 Mini-Universal MATE-N-LOK Connectors (UL94V-0) Performance Characteristics-- pages 83-84 Contacts -- page 86 Keying Plug -- page 86 Test Probe Contact -- page 86 Panel Cutout Recommendations-- page 89 Technical Documents-- pages 83 and 205-206 Mating Headers -- pages 90-92 A .933 [23.69] A .551 .551 [13.99] [13.99] .630 [16.0] .163 [4.14] .630 [16.00] .163 [4.14] Cap Plug Number of Circuits A Dim. 9 .551 13.99 .716 18.19 .882 22.40 12 15 Housing Part Numbers1 UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Plug Cap Plug Cap 172169-1 172161-1 172340-1 172332-1 172170-1 172162-1 172341-1 172333-1 172171-1 172163-1 172342-1 172334-1 1Housing part numbers shown in chart are also available in other colors: Red, Green, Blue, Black. To order connectors in these colors use the appropriate dash numbers as follows: Red 1-XXXXXX-2, Green 1-XXXXXX-5, Blue 1-XXXXXX-6, Black 1-XXXXXX-9 Note: All part numbers are RoHS Compliant. 8 thru 24 Circuit, Free-Hanging, Dual Row A .598 [15.19] .163 [4.14] .933 [23.70] .163 Typ. [4.14] Plug Number of Circuits 8 10 12 14 16 18 20 22 24 A Dim. .714 18.14 .877 22.28 1.040 26.42 1.203 30.56 1.366 34.70 1.529 38.84 1.692 42.98 1.855 47.12 2.018 51.26 Part Number UL94V-0 Nylon, White Color Plug 770579-1 770580-1 770581-1 770582-1 770583-1 770584-1 770585-1 770586-1 770587-1 Note: All part numbers are RoHS Compliant. 88 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Housings Hermaphroditic Free-Hanging 2, 3 and 4 Circuit Related Product Data .827 [21.0] .992 [25.19] .551 [14.0] .228 [5.8] .323 [8.20] .228 [5.8] .386 [9.80] .551 [10.40] .992 [25.19] .299 [7.59] High Density .598 [15.2] .598 [15.19] .228 [5.8] .276 [7.01] .661 [16.79] Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Product Specifications 108-1542 Mini-Universal MATE-N-LOK Connectors 108-1543 Mini-Universal MATE-N-LOK Headers 108-5151 Mini-Universal MATE-N-LOK Connectors (UL94V-2) 108-5138 Mini-Universal MATE-N-LOK Connectors (UL94V-0) Performance Characteristics-- pages 83-84 Contacts -- page 86 Cap Housings -- pages 87-89 Technical Documents-- pages 83 and 205-206 .992 [25.19] .323 [8.20] .504 [12.8] Part Numbers Number of Circuits UL94V-2 Nylon, Natural Color 172807-1 172808-1 172809-1 2 3 4 UL94V-0 Nylon, White Color 173956-1 173957-1 173958-1 Note: Housing mates to itself; 2 required per wire-to-wire connection. Note: All part numbers are RoHS Compliant. Recommended Cap Housing Panel Cutouts A B C .132 [3.35] View is from cap entry side Recommended Panel Thickness .031--.079 [.79 - 2.01] .063 [1.60] .211 D [5.35] Number of Circuits 2 3 4 6 9 12 15 Dimensions C A B .421 10.69 .421 10.69 .587 14.91 .752 19.10 .752 19.10 .917 23.29 1.080 27.43 .242 6.15 .242 6.15 .407 10.34 .573 14.55 .573 14.55 .738 18.75 .904 22.96 .098 2.49 .181 4.60 .098 2.49 .098 2.49 .181 4.60 .181 4.60 .181 4.60 D .407 10.3 .573 14.55 .407 10.3 .407 10.3 .573 14.55 .573 14.55 .573 14.55 89 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Vertical PC Board Pin Headers 4, 6, 8, 10 and 12 Circuit, Dual Row 2 and 3 Circuit, In-Line .220 [5.58] .163 [4.14] Centerline spacing .531 [13.49] Housing -- Nylon, white .387 [9.83] A Flammability Rating-- UL94V-0 Contacts -- Brass Solder tail diameter .039 [1.00] High Density A .030 [0.76] Material 9, 12 and 15 Circuit, Matrix 14, 16, 18, 20, 22 and 24 Circuit, Dual Row A Product Specifications 108-1542 Mini-Universal MATE-N-LOK Connectors 108-1543 Mini-Universal MATE-N-LOK Headers 108-5151 Mini-Universal MATE-N-LOK Connectors (UL94V-2) 108-5138 Mini-Universal MATE-N-LOK Connectors (UL94V-0) .030 [.76] .175 [4.44] .531 [13.49] Related Product Data Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline .175 [4.44] A .550 [13.97] .387 [9.83] .531 [13.49] A Dim. Pin Finish In-Line .387 9.83 3 In-Line .550 13.97 Mating Connectors 4 Dual Row .387 9.83 Mini-Universal MATE-N-LOK Plug Housings -- pages 87-89 6 Dual Row .550 13.97 Mini-Universal MATE-N-LOK 2 Plug Housings -- pages 101-102 8 Dual Row .713 18.11 9 Matrix .551 14.00 10 Dual Row .877 22.28 Dual Row 1.039 26.39 Matrix .713 18.11 14 Dual Row 1.202 30.53 15 Matrix .877 22.28 16 Dual Row 1.365 34.67 18 Dual Row 1.528 38.81 20 Dual Row 1.691 42.95 22 Dual Row 1.854 47.09 24 Dual Row 2.017 51.23 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Performance Characteristics-- pages 83-84 Recommended PC Board Hole Layouts-- page 93 Technical Documents-- pages 83 and 205-206 Number of Circuits Style 2 12 1 2 .531 .531 [13.49] [13.49] .030 [.76] .175 [4.44] .030 .030 [.762] [.76] .175 .175 [4.44] [4.44] Mates with Plug Housing Vertical Pin Header Part Numbers Part Number (Using Socket Contact) With Without Drain Holes Drain Holes Mini-Universal Mini-Universal MATE-N-LOK MATE-N-LOK 2 1-770166-0 1-770872-0 172165-1 794184-1 1-770166-1 1-770872-1 1-770170-0 1-770873-0 172166-1 794186-1 1-770170-1 1-770873-1 1-770174-0 1-770874-0 172167-1 794188-1 1-770174-1 1-770874-1 1-770178-0 1-770875-0 172168-1 794190-1 1-770178-1 1-770875-1 1-794065-0 1-794073-0 770579-1 794192-1 1-794065-1 1-794073-1 1-770182-0 1-770876-0 172169-1 794194-1 1-770182-1 1-770876-1 1-770743-0 1-770858-0 770580-1 794196-1 1-770743-1 1-770858-1 1-794066-0 1-770621-0 770581-1 794198-1 1-794066-1 1-770621-1 1-770186-0 1-794040-0 172170-1 794200-1 1-770186-1 1-794040-1 1-794067-0 1-794074-0 770582-1 794202-1 1-794067-1 1-794074-1 1-770190-0 1-770859-0 172171-1 794204-1 1-770190-1 1-770859-1 1-794068-0 1-794075-0 770583-1 794206-1 1-794068-1 1-794075-1 1-794069-0 1-794076-0 770584-1 794208-1 1-794069-1 1-794076-1 1-794070-0 1-794077-0 770585-1 794210-1 1-794070-1 1-794077-1 1-794071-0 1-794078-0 770586-1 794212-1 1-794071-1 1-794078-1 1-794072-0 1-794079-0 770587-1 794214-1 1-794072-1 1-794079-1 Tin Finish--Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact. Duplex Finish--Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. Note: All part numbers are RoHS Compliant. 90 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Vertical PC Board Blindmate Pin Headers 4, 6, 8 and 10 Circuit, Dual Row A .163 [4.14] Centerline spacing .645 [16.38] Material Housing -- Nylon, white Flammability Rating-- UL94V-0 Contacts -- Brass Solder tail diameter .039 [1.00] Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers .030 [0.76] .215 [5.46] .640 [16.26] .030 [0.76] .215 [5.46] High Density Related Product Data .640 [16.26] A 9, 12 and 15 Circuit, Matrix .808 [20.52] Mating Connectors Number of Circuits 4 Style A Dim. Pin Finish Pin Header Part Numbers With Drain Holes Dual Row .645 16.38 Tin1 1-794325-0 Duplex2 1-794325-1 Tin1 1-794326-0 Duplex2 1-794326-1 Tin1 1-794327-0 Duplex2 1-794327-1 Tin1 1-794432-0 Duplex2 1-794432-1 Tin1 1-794328-0 Duplex2 1-794328-1 Tin1 1-794329-0 Duplex2 1-794329-1 Tin1 1-794330-0 Duplex2 1-794330-1 Mini-Universal MATE-N-LOK Plug Housings -- pages 87-89 Mini-Universal MATE-N-LOK 2 Plug Housings -- pages 101-102 6 8 9 10 12 15 1 Tin 2 Dual Row Dual Row Matrix Dual Row Matrix Matrix .808 20.52 .971 24.66 .808 20.52 1.134 28.80 .971 24.66 1.134 28.80 Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Performance Characteristics-- pages 83-84 Recommended PC Board Hole Layouts-- page 93 Technical Documents-- pages 83 and 205-206 Mates with Plug Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MATE-N-LOK MATE-N-LOK 2 172167-1 794188-1 172168-1 794190-1 770579-1 794192-1 172169-1 794194-1 770580-1 794196-1 172170-1 794200-1 172171-1 794204-1 Finish -- Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact. Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. Note: All part numbers are RoHS Compliant. 91 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Right-Angle PC Board Pin Headers With Board Lock Feature 4, 6, 8, 10 and 12 Circuit, Dual Row 1, 2 and 3 Circuit, In-Line .163 [4.14] Centerline spacing .500 [12.70] Material .500 [12.70] A .030 [0.76] .145 [3.68] A .030 [0.76] .145 [3.68] Housing -- Nylon, white color .225 [5.72] Flammability Rating -- UL94V-0 .236 [5.99] .270 [6.86] Contacts -- Brass .270 [6.86] .386 [9.80] .236 [5.99] High Density Solder tail diameter .039 [1.00] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row Related Product Data .500 [12.70] Product Specification 108-1694 Mini-Universal MATE-N-LOK 2 Headers .386 [9.80] Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Performance Characteristics-- pages 83-84 Recommended PC Board Hole Layouts-- page 93 Technical Documents-- pages 83 and 205-206 Mating Connectors Mini-Universal MATE-N-LOK Plug Housings -- pages 87-89 A .030 [0.76] .145 [3.68] .270 [6.86] .236 [5.99] Number of Circuits Style A Dim. Pin Finish Pin Header Part Number With Board Lock 1 -- .225 5.72 2 In-Line .388 9.86 3 In-Line .551 14.00 4 Dual Row .388 9.86 6 Dual Row .551 14.00 8 Dual Row .714 18.14 10 Dual Row .877 22.28 12 Dual Row 1.040 26.42 14 Dual Row 1.203 30.56 16 Dual Row 1.366 34.70 18 Dual Row 1.529 38.84 20 Dual Row 1.692 42.98 22 Dual Row 1.855 47.12 24 Dual Row 2.018 51.26 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 1-794374-0 1-794374-1 1-770966-0 1-770966-1 1-770967-0 1-770967-1 1-770968-0 1-770968-1 1-770969-0 1-770969-1 1-770970-0 1-770970-1 1-770971-0 1-770971-1 1-770972-0 1-770972-1 1-770973-0 1-770973-1 1-770974-0 1-770974-1 1-794105-0 1-794105-1 1-794106-0 1-794106-1 1-794107-0 1-794107-1 1-794108-0 1-794108-1 Mini-Universal MATE-N-LOK 2 Plug Housings -- pages 101-102 Mates with Plug Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MATE-N-LOK MATE-N-LOK 2 172164-1 -- 172165-1 794184-1 172166-1 794186-1 172167-1 794188-1 172168-1 794190-1 770579-1 794192-1 770580-1 794196-1 770581-1 794198-1 770582-1 794202-1 770583-1 794206-1 770584-1 794208-1 770585-1 794210-1 770586-1 794212-1 770587-1 794214-1 1Tin Finish -- Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact. Finish -- Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2Duplex Note: All part numbers are RoHS Compliant. 92 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Recommended PC Board Hole Layouts for Vertical and Blindmate Headers 2 and 3 Circuit, In-Line .175 [4.44] .175 [4.44] .062 [1.57] thick board, tolerances non-accumulative .125 Dia. [3.18] .055 Dia. [1.40] Typ. Related Product Data 4, 6, 8, 10 and 12 Circuit, Dual Row .163 Typ. [4.14] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row .055 .003 Typ. [1.40 .076] .125 Dia. [3.18] .163 [4.14] .055 Dia. [1.40] .152 Dia. [3.86] .209 [5.33] 4, 8 and 12 Circuit, Dual Row .163 [4.14] .0815 [2.070] 4 Plc. .289 [7.34] .152 Dia. [3.86] .209 [5.33] .163 Typ. [4.14] .055 Dia. [1.40] Typ. .209 [5.33] .152 Dia. [3.86] 22 Circuit, Dual Row .055 Dia. [1.40] Typ. .289 [7.34] .152 [3.86] Dia. 2 Plc. .489 [12.42] 2 Plc. .163 [4.14] .055 Dia. [1.40] Typ. 3 Plc. .289 [7.34] .152 Dia. [3.86] .209 [5.33] 14 and 18 Circuit, Dual Row .163 Typ. [4.14] .163 [4.14] .055 Dia. [1.40] Typ. .289 [7.34] .152 [3.86] Dia. 2 Plc. .326 [8.28] 2 Plc. .209 [5.33] 16, 20 and 24 Circuit, Dual Row .163 Typ. [4.14] .163 [4.14] 3 Circuit, In-Line 6 and 10 Circuit, Dual Row .289 [7.34] .209 [5.33] .152 Dia. [3.86] .289 [7.34] .055 Dia. [1.40] Typ. 2 Plc. .163 [4.14] .163 Typ. [4.14] .055 Dia. [1.40] Typ. .0815 [2.070] 2 Plc. Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Right-Angle Headers-- page 92 .163 Typ. [4.14] 2 Circuit, In-Line 1 Circuit .289 [7.34] Related Product Data .163 [4.14] .125 [3.18] 2 Plcs. .163 Typ. [4.14] .062 [1.57] thick board, tolerances non-accumulative .175 [4.45] .175 [4.45] .163 Typ. [4.14] Recommended PC Board Hole Layouts for RightAngle Headers High Density 9, 12 and 15 Circuit, Matrix .055 Dia. [1.40] Typ. .163 [4.14] .163 [4.14] Typ. Vertical Headers-- pages 90-91 .175 [4.44] .125 Dia. [3.18] .055 Dia. [1.40] Typ. .209 [5.33] .163 [4.14] .0815 [2.070] 4 Plc. .163 Typ. [4.14] .289 [7.34] .152 Dia. [3.86] 2 Plc. .407 [10.35] 2 Plc. .055 Dia. [1.40] Typ. .209 [5.33] 93 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Strain Reliefs for Plug or Cap Housings 6 and 8 Circuit Plug or Cap housing Related Product Data Housings-- pages 87-89 Technical Documents-- pages 83 and 205-206 Close and Lock Strain Relief around housing. Insert Locking Tab to firmly secure wires. Strain Relief High Density These Strain Reliefs may also be used with AMP-DUAC Receptacle housings on page 126. Locking Tab Mini-Universal MATE-N-LOK Connectors .163 [4.14] Centerline Break off plastic connecting Locking Tab to Strain Relief Step 2 Step 1 Style Number of Circuits A Dim. Wire Bundle Dia. Range Part Numbers UL94V-0 Nylon, White Color 6 .920 23.36 .165-.220 4.19-5.59 794423-1 8 .920 23.36 .180-.245 4.57-6.22 794370-1 Dual Row Use With 172168-1 172160-1 172339-1 172331-1 770979-1 9 Circuit 33 20 19 19 13 6 4 9 6 2.8 2PLC Style Matrix 9 2.8 2PLC Part Numbers Part Number Number of Circuits Plug 316454-1 Cap 316455-1 9 Use With 172169-1 172340-1 172161-1 172332-1 Note: All part numbers are RoHS Compliant. 94 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Sealed Connector System Product Facts -- Sealed Connector System Wire-to-wire and wire-to-board Dual row, 2 to 10 positions (even only) and 16 positions Mates with all standard Mini-Universal MATE-N-LOK connector housings and pin headers (except Blindmate) Positive, polarized keyed and latched orientation to ease application Utilizes proven MiniUniversal MATE-N-LOK contacts with existing application tooling Tested to Sealing Level of IP56 and IP57 per IEC 60529 Primarily used in Appliance, Vending and HVAC applications Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used on the power supply wiring Fully polarized to provide proper plug-to-cap mating incorporating a positive locking mechanism to help prevent accidental disengagement of mated connectors. Also facilitates panel mounting Free-hanging or panel mount Connectors can be mounted to .031-.079 [0.79-2.00] thick panels With seals, contacts accept wire size range 26-18 AWG [.12-.8 mm2] with insulation diameter of .040-.083 [1.02-2.11] .163 [4.14] centerline spacing Not for interrupting current Performance Characteristics Technical Documents The Mini-Universal MATE-N-LOK Connector performance characteristics found on pages 95-96 are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. Product Specifications 108-1542-2 Mini-Universal MATE-N-LOK Splash-Proof Seals 108-1542 Mini-Universal MATE-NLOK Connectors 108-1543 Mini-Universal MATE-NLOK Headers Low Level Termination Resistance 20 milliohms max. total resistance between wire crimps of a mated pin and socket Dielectric Withstanding Voltage-- 1.5 KVAC between adjacent circuits Insulation Resistance-- 1000 megohms minimum between adjacent circuits Voltage Rating--600 V AC or DC Contact Retention--8 lb. min. per contact Mini-Universal MATE-N-LOK Sealed Connector System .163 [4.14] Centerline Splash-proof design allows use in areas where high humidity, intermittent liquid splashing or foam-in applications require a sealed connector for improved electrical performance High Density Application Specification 114-13089 Mini-Universal MATE-N-LOK Sealed Connector Instruction Sheets 408-3234 Mini-Universal MATE-N-LOK Connectors 411-5105 Mini-Universal MATE-N-LOK Connectors Durability--20 cycles, mating and unmating 95 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Sealed Connector System (Continued) .320 [8.13] Plug Part Number 794894-1 (2 position shown) .599 [15.22] .486 [12.34] .386 [9.80] .163 [4.14] .220 [5.59] High Density .933 [23.70] Cap Part Number 794896-1 (2 position shown) .386 [9.80] .472 [11.99] .163 [4.14] Mini-Universal MATE-N-LOK Sealed Connector System .163 [4.14] Centerline .220 [5.59] .933 [23.70] Individual Wire Seals Single Housing Cavity Plug Seal Single Wire Seal Part Number 794995-1 Part Number 794758-1 .118.004 [3.0 0.1] .06.002 [1.50 0.05 .38 0.10 0.10 .38 [9.68 0.25] [9.68 0.25] .06 .002 [1.50 0.05] .102 [2.6] .102 [2.6] Interface Seals .291 .004 [7.4 0.1] .161004 [4.1 0.1] .157 .004 [4 0.1] .102 [2.6] .004 [0.1] .291.004 [7.4 0.1] .294 0.10 .294 0.10 [7.470.25] 0.25] [7.47 Number of Positions 2 4 6 8 10 16 Interface Seals 794772-2 794772-4 794772-6 794772-8 1-794772-0 1-1586362-6 Plug for Sealing 794894-1 794805-1 794895-1 794821-1 794781-1 794824-1 Cap for Sealing 794896-1 794939-1 794940-1 794941-1 794942-1 -- Vertical Headers for Sealing 1-770872-X 1-770874-X 1-770875-X 1-794073-X 1-770858-X 1-794075-X Right Angle Headers for Sealing 1-770966-X 1-770968-X 10770969-X 1-770970-X 1-770971-X 1-770974-X -0 for tin finish, -1 for duplex. See Mini-Universal MATE-N-LOK section for details Individual Wire Seal Contacts Wire Size Ins. Dia. Range Range AWG [mm2] Material and Finish 26 -22 [.12 -.3] .040-.060 1.02-1.52 Brass, Pre-tin Brass, Duplex1 22 -18 [.3 -.8] .050-.083 1.27-2.11 Brass, Pre-tin Brass, Duplex1 Contact Part Numbers (for use with Single Wire Seals) Pin Socket Strip Form Loose Piece Strip Form Loose Piece HDM Applicator Part No. 567066-33 770901-1 770985-1 770902-1 770986-1 567066-43 1-770901-0 1-770985-0 1-770902-0 1-770986-0 567066-53 567067-12 770903-1 770987-1 770904-1 770988-1 567067-22 1-770903-0 1-770987-0 1-770904-0 1-770988-0 567067-32 Hand Tool Part No. 91529-1 91522-1 1 Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area over .000050 [.00127] min. nickel underplate on entire contact. 2 HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-ELECTRIC Model G Machine. See pages 207-210 for further information. 3 HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information. Note: Ganged Wire Seals are available; contact Technical Support. 96 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) New: Mini Universal Gang Seals No Seal Crimping Required! Interface Seals .38 0.10 0.10 .38 [9.68 0.25] [9.68 0.25] .032 Max [0.8] Dim A .010 [ 0.25] High Density .386 .010 [9.8 0.25] .163 [4.14] .294 0.10 .294 0.10 [7.470.25] 0.25] [7.47 Dim B Interface Seals Gang Wire Seal Plug for Sealing Cap for Sealing 2 4 6 8 10 16 794772-2 794772-4 794772-6 794772-8 1-794772-0 1-1586362-6 1586359-2 1586359-4 1586359-6 1586359-8 1-1586359-0 1-1586359-6 794894-1 794805-1 794895-1 794821-1 794781-1 794824-1 794896-1 794939-1 794940-1 794941-1 794942-1 -- Vertical Headers for Sealing* 1-770872-X 1-770874-X 1-770875-X 1-794073-X 1-770858-X 1-794075-X Right Angle Headers for Sealing* 1-770966-X 1-770968-X 1-770969-X 1-770970-X 1-770971-X 1-770974-X Mini-Universal MATE-N-LOK Sealed Connector System .163 [4.14] Centerline Number of Positions *-0 for tin finish, -1 for duplex. See Mini-Universal MATE-N-LOK section for details Gang Wire Seal Contacts Wire Size Range Insulation Range 16 AWG .050 - .083 18 - 22 AWG .050 - .083 22 - 26 AWG .050 - .069 Material Finish Brass, Pre-tin Brass, Duplex1 Brass, Pre-tin Brass, Duplex Brass, Pre-tin Brass, Duplex1 Pin Strip Form Loose Piece 1586537-1 -- 1586537-3 -- 794440-1 -- 794440-3 -- 770901-1 770985-1 1-770901-0 1-770985-0 Socket Strip Form Loose Piece 1586538-1 -- 1586538-3 -- 794831-1 -- 794831-3 -- 770902-1 770986-1 1-770902-0 1-770986-0 1 Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area over .000050 [.00127] min. nickel underplate on entire contact. 97 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Engineering Notes 98 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide proper plug-to-cap mating Lanceless contacts for tangle-free handling Toolless contact removal Tin or duplex gold plated contacts Available in 2 through 24 circuit sizes wire-to-wire and wire-to-board Mates with standard MiniUniversal MATE-N-LOK headers and connectors Contacts available in strip and loose piece Polarized housings available in UL 94V-0 or UL 94V-2 flammability rated material Performance Characteristics Mini-Universal MATE-N-LOK 2 pins and sockets can be intermixed in Mini-Universal MATE-N-LOK 2 housings The Mini-Universal MATE-N-LOK 2 Connector performance characteristics found on pages 99-100 are based on free-hanging connectors, loaded with contacts crimped on stranded wire. Mini-Universal MATE-N-LOK 2 pins and sockets can not be used in standard MiniUniversal MATE-N-LOK housings Low Level Termination Resistance 20 milliohms max. total resistance between wire crimps of a mated pin and socket Contacts accept wire size range 30-16 AWG [.05-1.2 mm2] Dielectric Withstanding Voltage 1500 V AC or DC between adjacent circuits at sea level .163 [4.14] centerline spacing Insulation Resistance-- 100 megohms minimum between adjacent circuits Not for interrupting current Voltage Rating--600 V AC or DC Recognized under the Component Program of Underwriters Laboratories Inc. to US and Canadian Standards, File No. E28476 Contact Retention--15 lb. min. per contact Durability--25 cycles, mating and unmating Current Rating--up to 10.5 amps per circuit; 2 position Mating Force--2.5 lb. max. per circuit Unmating Force--0.25 lb. minimum per circuit Wire Size AWG mm2 30 28 26 24 22 20 18 16 .05 .08 .12 .2 .3 .5 .8 1.2 Termination Resistance Test Resistance Current Milliohms (Amps) (Max. Init.) -- -- -- -- -- -- -- -- Technical Documents Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers Application Specification 114-1111 Mini-Universal MATE-N-LOK 2 Connectors Instruction Sheet 408-3393 Mini-Universal MATE-N-LOK 2 Connectors -- -- -- -- -- -- -- -- Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline High Density Contact Crimp Tensile Force Force (Min.) lbs. N -- -- -- -- 4 18 -- -- 11 49 13 58 15 67 18 80 Mini-Universal MATE-N-LOK 2 connectors also will withstand the following tests: Housing Lock Strength--6 lb. min. Thermal Shock-- -55C to +105C Temperature-Humidity Cycling-- 25C to 65C at 95 RH Vibration--10-55-10 cycles per minute at .06 inch total excursion Physical Shock--18 drops, 50 G half-sine at 11 milliseconds 99 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Current Rating Verification for 30C Maximum Temperature Rise 100% Energized Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline High Density Maximum Current--Maximum current rating of Mini-Universal MATE-N-LOK 2 connectors is limited by the maximum operating temperature of the housings which is 105C (gold) or 85C (tin) including the temperature rise of the contacts which is a maximum of 30C. There are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. These variables are: Wire Size--Larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. Longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. Connector Size--In general, the more circuits in a connector, the less current can be carried. Ambient Temperature--The higher the ambient temperature, the less current can be carried in any given connector. Printed Wiring Board Conductor Size--The finished trace conductor width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation. 2 Circuit Connector (Wire-to-Wire) Temperature Rise (Degrees C) 30 30 25 20 15 10 5 0 15 18 AWG 10.5 Amps max. Current Rating (Amperes) Current is limited above 75 C so as not to exceed 105 C (maximum operating temperature) once the t-rise is added to the ambient 10 6.75 Amps max. 24 AWG 5 0 -55 -45 -35 40 50 60 70 75 80 90 100 105 110 Ambient Temperature (Degrees C) 6 Circuit Connector (Wire-to-Wire) 30 30 Temperature Rise (Degrees C) 25 20 15 10 5 0 15 Current is limited above 75 C so as not to exceed 105 C (maximum operating temperature) once the t-rise is added to the ambient 7.5 Amps max. 10 18 AWG 5 5 Amps max. 24 AWG Current Rating (Amperes) Performance Characteristics (Continued) 0 -55 -45 -35 40 50 60 70 75 80 90 100 105 110 Ambient Temperature (Degrees C) Contacts .775 [19.69] .775 [19.69] Pin diameter .039 [0.99] Material Brass Stock Thickness .010 [0.25] These contacts can be used in either Mini-Universal MATE-N-LOK 2 Plug or Cap housings only. Related Product Data Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers Application Specification 114-1111 Mini-Universal MATE-N-LOK 2 Connectors Performance Characteristics-- pages 99-100 Housings -- pages 101-102 Technical Documents-- pages 99 and 205-206 Pin Socket Not to be used with Mini-Universal MATE-N-LOK Connectors Contact Part Numbers Socket Loose Strip Loose Piece Form Piece HDM Applicator Part No. Wire Size Range AWG [mm2] Ins. Dia. Range 30 -26 [.05 -.12] .035 -.050 .889 -1.27 Pre-tin 794216-1 Duplex1 1-794216-0 26 -22 [.12 -.3] .047 -.069 1.19 -1.75 Pre-tin 794218-1 Duplex1 1-794218-0 22 -18 [.3 -.8] .059 -.094 1.50 -2.39 Pre-tin 794220-1 Duplex1 1-794220-0 1-794228-0 1-794221-0 1-794229-0 567418-12 567418-22 567418-32 567066-33 567066-43 567066-53 680854-12 680854-22 680854-32 20-16 [.5-1.2] .079 -.126 2.01-3.20 Pre-tin Duplex1 794222-1 1-794222-0 794230-1 794223-1 794231-1 1-794230-0 1-794223-0 1-794231-0 680582-22 680582-32 Finish Pin Strip Form 794224-1 794217-1 794225-1 1-794224-0 1-794217-0 1-794225-0 794226-1 794219-1 794227-1 1-794226-0 1-794219-0 1-794227-0 794228-1 794221-1 794229-1 Hand Tool Part No. 90717-2 91529-1 91522-1 91594-1 1Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area over .000050 [.00127] min. nickel underplate on entire contact. 2HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-ELECTRIC Model G Machine. 3HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information. Note: All part numbers are RoHS Compliant. 100 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Housings 2 and 3 Circuit, In-Line Free-Hanging .163 [4.14] Centerline spacing .679 [17.25] Max. .163 [4.14] Related Product Data .345 [8.76] .935 [23.75] Max. A Max. A Max. .965 [24.51] Max. Cap Plug .844 [21.44] .163 [4.14] .965 [24.51] Max. Cap Housing Part Numbers UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Plug Cap Plug Cap A Dimension .405 10.29 .405 10.29 3 Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline A Max. Plug 2 .736 [18.69] Max. .163 [4.14] .345 [8.76] .935 [23.75] Max. A Max. Number of Circuits .571 [14.50] Max. High Density Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers Performance Characteristics-- pages 99-100 Contacts -- page 100 Technical Documents-- pages 99 and 205-206 Mating Headers--pages 103-105 .163 [4.14] 794184-1 794185-1 794237-1 794238-1 794186-1 794187-1 794239-1 794240-1 4 and 6 Circuit, Dual Row .679 [17.25] Max. .163 [4.14] .163 [4.14] .345 [8.76] .935 [23.75] Max. A Max. .571 [14.50] Max. Plug Number of Circuits 4 6 Keying Plug .965 [24.51] Max. A Max. Cap Housing Part Numbers UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Plug Cap Plug Cap A Dimension .571 14.50 .736 18.70 794188-1 794189-1 794241-1 794242-1 794190-1 794191-1 794243-1 794244-1 .098 [2.49] .098 [2.49] Material UL94V-0 Nylon, white color .065 [1.65] .920 [23.37] .070 [1.78] Part Number 794369-1 Note: All part numbers are RoHS Compliant. 101 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Housings 9, 12 and 15 Circuit, Matrix Free-Hanging .163 [4.14] Centerline spacing .844 [21.44] Max. Related Product Data High Density Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers Performance Characteristics-- pages 99-100 Contacts--page 100 Keying Plug--page 101 Technical Documents-- pages 99 and 205-206 Mating Headers--pages 103-105 .345 [8.76] .935 [23.75] Max. Number of Circuits Plug 15 A Max. Cap Housing Part Numbers UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Plug Cap Plug Cap .736 18.69 .901 22.89 1.067 27.10 9 .965 [24.51] Max. A Max. A Dimension 12 Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline .736 [18.69] Max. 794194-1 794195-1 794247-1 794248-1 794200-1 794201-1 794253-1 794254-1 794204-1 794205-1 794257-1 794258-1 8 through 24 Circuit, Dual Row .571 Max. [14.50] .163 [4.14] .163 [4.14] A Max. .965 Max. [24.51] Cap .679 Max. [17.25] .163 [4.14] .163 [4.14] .345 [8.76] .935 Max. [23.75] A Max. Plug Number of Circuits 8 10 12 14 16 18 20 22 24 A Dimension .899 22.84 1.062 26.98 1.225 31.12 1.388 35.26 1.551 39.40 1.714 43.54 1.877 47.68 2.040 51.82 2.203 55.96 Housing Part Numbers UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Plug Cap Plug Cap 794192-1 794193-1 794245-1 794246-1 794196-1 794197-1 794249-1 794250-1 794198-1 794199-1 794251-1 794252-1 794202-1 794203-1 794255-1 794256-1 794206-1 794207-1 794259-1 794260-1 794208-1 794209-1 794261-1 794262-1 794210-1 794211-1 794263-1 794264-1 794212-1 794213-1 794265-1 794266-1 794214-1 794215-1 794267-1 794268-1 Note: All part numbers are RoHS Compliant. 102 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Vertical PC Board Pin Headers 4, 6, 8, 10 and 12 Circuit, Dual Row 2 and 3 Circuit, In-Line .220 [5.58] .163 [4.14] Centerline spacing .531 [13.49] .175 [4.44] A .030 [0.76] Material .387 [9.83] A Housing -- Nylon, white Flammability Rating-- UL94V-0 Contacts -- Brass Solder tail diameter .039 [1.00] .030 [.762] .175 [4.44] .531 [13.49] 9, 12 and 15 Circuit, Matrix 14, 16, 18, 20, 22 and 24 Circuit, Dual Row A A Related Product Data .550 [13.97] .387 [9.83] .030 [.762] .175 [4.44] .531 [13.49] Style A Dim. Pin Finish Mating Connectors 2 In-Line .387 9.83 Mini-Universal MATE-N-LOK 2 Plug Housings-- pages 101-102 3 In-Line .550 13.97 Mini-Universal MATE-N-LOK Plug Housings-- pages 87-89 4 Dual Row .387 9.83 6 Dual Row .550 13.97 8 Dual Row .713 18.11 9 Matrix .551 14.00 10 Dual Row .877 22.28 Dual Row 1.039 26.39 Matrix .713 18.11 14 Dual Row 1.202 30.53 15 Matrix .877 22.28 16 Dual Row 1.365 34.67 18 Dual Row 1.528 38.81 20 Dual Row 1.691 42.95 22 Dual Row 1.854 47.09 24 Dual Row 2.017 51.23 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 12 Vertical Pin Header Part Numbers With Without Drain Holes Drain Holes 1-770166-0 1-770166-1 1-770170-0 1-770170-1 1-770174-0 1-770174-1 1-770178-0 1-770178-1 1-794065-0 1-794065-1 1-770182-0 1-770182-1 1-770743-0 1-770743-1 1-794066-0 1-794066-1 1-770186-0 1-770186-1 1-794067-0 1-794067-1 1-770190-0 1-770190-1 1-794068-0 1-794068-1 1-794069-0 1-794069-1 1-794070-0 1-794070-1 1-794071-0 1-794071-1 1-794072-0 1-794072-1 1-770872-0 1-770872-1 1-770873-0 1-770873-1 1-770874-0 1-770874-1 1-770875-0 1-770875-1 1-794073-0 1-794073-1 1-770876-0 1-770876-1 1-770858-0 1-770858-1 1-770621-0 1-770621-1 1-794040-0 1-794040-1 1-794074-0 1-794074-1 1-770859-0 1-770859-1 1-794075-0 1-794075-1 1-794076-0 1-794076-1 1-794077-0 1-794077-1 1-794078-0 1-794078-1 1-794079-0 1-794079-1 .030 [.762] .175 [4.44] Mates with Plug Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MATE-N-LOK MATE-N-LOK 2 172165-1 794184-1 172166-1 794186-1 172167-1 794188-1 172168-1 794190-1 770579-1 794192-1 172169-1 794194-1 770580-1 794196-1 770581-1 794198-1 172170-1 794200-1 770582-1 794202-1 172171-1 794204-1 770583-1 794206-1 770584-1 794208-1 770585-1 794210-1 770586-1 794212-1 770587-1 794214-1 Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline Number of Circuits .531 [13.49] 1Tin Finish -- Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact. Finish -- Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2Duplex Note: All part numbers are RoHS Compliant. 103 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Density Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers Performance Characteristics-- pages 99-100 Recommended PC Board Hole Layout--page 106 Technical Documents-- pages 99 and 205-206 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Vertical PC Board Blindmate Pin Headers 4, 6, 8 and 10 Circuit, Dual Row A .163 [4.14] Centerline spacing .645 [16.38] Material .640 [16.26] .030 [0.76] .215 [5.46] .640 [16.26] .030 [0.76] .215 [5.46] Housing -- Nylon, white Flammability Rating -- UL94V-0 Contacts -- Brass Solder tail diameter .039 [1.00] High Density Related Product Data Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers Performance Characteristics-- pages 99-100 Recommended PC Board Hole Layout--page 106 Technical Documents-- pages 99 and 205-206 A 9, 12 and 15 Circuit, Matrix .808 [20.52] Number of Circuits 4 Style A Dim. Pin Finish Pin Header Part Numbers with Drain Holes Dual Row .645 16.38 Tin1 1-794325-0 Duplex2 1-794325-1 Tin1 1-794326-0 Mating Connectors Mini-Universal MATE-N-LOK 2 Plug Housings-- pages 101-102 Mini-Universal MATE-N-LOK Plug Housings-- pages 87-89 6 Dual Row .808 20.52 Duplex2 1-794326-1 8 Dual Row .971 24.66 Tin1 1-794327-0 Duplex2 1-794327-1 Tin1 1-794432-0 9 Matrix .808 20.52 Duplex2 1-794432-1 10 Dual Row 1.134 28.80 Tin1 1-794328-0 Duplex2 1-794328-1 12 Matrix .971 24.66 Tin1 1-794329-0 Duplex2 1-794329-1 Tin1 1-794330-0 Duplex2 1-794330-1 15 Matrix 1.134 28.80 Mates with Plug Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MATE-N-LOK MATE-N-LOK 2 172167-1 794188-1 172168-1 794190-1 770579-1 794192-1 172169-1 794194-1 770580-1 794196-1 172170-1 794200-1 172171-1 794204-1 1Tin Finish -- Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact. Finish -- Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2Duplex Note: All part numbers are RoHS Compliant. 104 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Right-Angle PC Board Pin Headers With Board Lock Feature 4, 6, 8, 10 and 12 Circuit, Dual Row 2 and 3 Circuit, In-Line .163 [4.14] Centerline spacing .500 [12.70] .145 [3.68] Material .500 [12.70] A .030 [0.76] .145 [3.68] Housing -- Nylon, white color A .030 [0.76] .225 [5.72] Flammability Rating -- UL94V-0 .236 [5.99] .270 [6.86] Contacts -- Brass .386 [9.80] .270 [6.86] Solder tail diameter .039 [1.00] .236 [5.99] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row .500 [12.70] Mating Connectors Mini-Universal MATE-N-LOK 2 Plug Housings-- pages 101-102 A .030 [0.76] .145 [3.68] .270 [6.86] .386 [9.80] .236 [5.99] Number of Circuits Style A Dim. Pin Finish Pin Header Part Number with Board Lock 2 In-line .388 9.86 3 In-line .551 14.00 4 Dual Row .388 9.86 6 Dual Row .551 14.00 8 Dual Row .714 18.14 10 Dual Row .877 22.28 12 Dual Row 1.040 26.42 14 Dual Row 1.203 30.56 16 Dual Row 1.366 34.70 18 Dual Row 1.529 38.84 20 Dual Row 1.692 42.98 22 Dual Row 1.855 47.12 24 Dual Row 2.018 51.26 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 Tin1 Duplex2 1-770966-0 1-770966-1 1-770967-0 1-770967-1 1-770968-0 1-770968-1 1-770969-0 1-770969-1 1-770970-0 1-770970-1 1-770971-0 1-770971-1 1-770972-0 1-770972-1 1-770973-0 1-770973-1 1-770974-0 1-770974-1 1-794105-0 1-794105-1 1-794106-0 1-794106-1 1-794107-0 1-794107-1 1-794108-0 1-794108-1 Mini-Universal MATE-N-LOK Plug Housings-- pages 87-89 Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline Product Specification 108-1694 Mini-Universal MATE-N-LOK 2 Headers Performance Characteristics-- pages 99-100 Recommended PC Board Hole Layout-- page 106 Technical Documents-- pages 99 and 205-206 High Density Related Product Data Mates with Plug Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MATE-N-LOK MATE-N-LOK 2 172165-1 794184-1 172166-1 794186-1 172167-1 794188-1 172168-1 794190-1 770579-1 794192-1 770580-1 794196-1 770581-1 794198-1 770582-1 794202-1 770583-1 794206-1 770584-1 794208-1 770585-1 794210-1 770586-1 794212-1 770587-1 794214-1 1Tin Finish -- Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact. Finish -- Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2Duplex Note: All part numbers are RoHS Compliant. 105 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) 2 and 3 Circuit, In-Line Recommended PC Board Hole Layouts for Vertical and Blindmate Headers .062 [1.57] thick board, tolerances non-accumulative .175 [4.44] .175 [4.44] .125 Dia. [3.18] .055 Dia. [1.40] Typ. Related Product Data 4, 6, 8, 10 and 12 Circuit, Dual Row .163 Typ. [4.14] High Density 9, 12 and 15 Circuit, Matrix 14, 16, 18, 20, 22 and 24 Circuit, Dual Row .055 .003 Typ. [1.40 .076] .125 Dia. [3.18] .055 Dia. [1.40] Typ. Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline 2 Circuit .163 [4.14] Related Product Data Right-Angle Headers-- page 105 4, 8 and 12 Circuit 3 Circuit .0815 [2.070] 2 Plc. .289 [7.34] .055 Dia. [1.40] Typ. 2 Plc. .152 Dia. [3.86] .209 [5.33] .163 [4.14] .055 Dia. [1.40] Typ. 3 Plc. .289 [7.34] .152 Dia. [3.86] .163 [4.14] .289 [7.34] .163 Typ. [4.14] .163 [4.14] .152 [3.86] Dia. 2 Plc. .055 Dia. [1.40] Typ. .489 [12.42] 2 Plc. .326 [8.280] 2 Plc. .209 [5.33] 16, 20 and 24 Circuit .163 Typ. [4.14] .152 [3.86] Dia. 2 Plc. .055 Dia. [1.40] Typ. .289 [7.34] 22 Circuit .289 [7.34] .209 [5.33] 14 and 18 Circuit .209 [5.33] .163 [4.14] .163 Typ. [4.14] .055 Dia. [1.40] Typ. .152 Dia. [3.86] .209 [5.33] .163 Typ. [4.14] .055 Dia. [1.40] Typ. .152 Dia. [3.86] .0815 [2.070] 4 Plc. .289 [7.34] 6 and 10 Circuit .163 [4.14] .163 [4.14] .163 Typ. [4.14] .125 [3.18] 2 Plcs. .163 Typ. [4.14] .062 [1.57] thick board, tolerances non-accumulative .175 [4.45] .175 [4.45] .163 Typ. [4.14] Recommended PC Board Hole Layouts for RightAngle Headers .163 [4.14] .163 [4.14] Typ. Vertical Headers-- pages 103-104 .175 [4.44] .125 Dia. [3.18] .055 Dia. [1.40] Typ. .209 [5.33] .163 [4.14] .0815 [2.070] 4 Plc. .163 Typ. [4.14] .289 [7.34] .152 Dia. [3.86] 2 Plc. .407 [10.35] 2 Plc. .055 Dia. [1.40] Typ. .209 [5.33] 106 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Mini-Universal MATE-N-LOK 2 Connector Mating Combinations Connector Part Number Number Flammability of Rating Circuits 2 3 4 8 10 Cap1 Housing Part No. UL94V-2 In-Line 794237-1 794238-1 UL94V-0 In-Line 794184-1 794185-1 UL94V-2 In-Line 794239-1 794240-1 UL94V-0 In-Line 794186-1 794187-1 UL94V-2 Dual Row 794241-1 794242-1 UL94V-0 Dual Row 794188-1 794189-1 UL94V-2 Dual Row 794243-1 794244-1 UL94V-0 Dual Row 794190-1 794191-1 UL94V-2 Dual Row 794245-1 794246-1 UL94V-0 Dual Row 794192-1 794193-1 UL94V-2 Matrix 794247-1 794248-1 UL94V-0 Matrix 794194-1 794195-1 UL94V-2 Dual Row 794249-1 794250-1 UL94V-0 Dual Row 794196-1 794197-1 UL94V-2 Matrix 794253-1 Dual Row 794251-1 794254-1 794252-1 12 Matrix 794200-1 794201-1 Dual Row 794198-1 794199-1 UL94V-0 14 15 16 18 20 22 24 UL94V-2 Dual Row 794255-1 794256-1 UL94V-0 Dual Row 794202-1 794203-1 UL94V-2 Matrix 794257-1 794258-1 UL94V-0 Matrix 794204-1 794205-1 UL94V-2 Dual Row 794259-1 794260-1 UL94V-0 Dual Row 794206-1 794207-1 UL94V-2 Dual Row 794261-1 794262-1 UL94V-0 Dual Row 794208-1 794209-1 UL94V-2 Dual Row 794263-1 794264-1 UL94V-0 Dual Row 794210-1 794211-1 UL94V-2 Dual Row 794265-1 794266-1 UL94V-0 Dual Row 794212-1 794213-1 UL94V-2 Dual Row 794267-1 794268-1 UL94V-0 Dual Row 794214-1 794215-1 Right-Angle Board Lock -- 1-770966-0 1-770966-1 -- 1-770967-0 1-770967-1 -- 1-770968-0 1-770968-1 -- 1-770969-0 1-770969-1 -- 1-770970-0 1-770970-1 -- -- -- -- 1-770971-0 1-770971-1 -- -- -- -- 1-770972-0 1-770972-1 -- 1-770973-0 1-770973-1 -- -- -- -- 1-770974-0 1-770974-1 -- 1-794105-0 1-794105-1 -- 1-794106-0 1-794106-1 -- 1-794107-0 1-794107-1 -- 1-794108-0 1-794108-1 Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline 9 Plug1 Housing Part No. High Density 6 Style Mating Connector Part Number PC Board Pin Headers4 Vertical Plating With Without Blindmate Drain Holes Drain Holes -- -- -- -- Tin3 1-770166-0 1-770872-0 -- Duplex2 1-770166-1 1-770872-1 -- -- -- -- -- Tin3 1-770170-0 1-770873-0 -- Duplex2 1-770170-1 1-770873-1 -- -- -- -- -- Tin3 1-770174-0 1-770874-0 1-794325-0 Duplex2 1-770174-1 1-770874-1 1-794325-1 -- -- -- -- Tin3 1-770178-0 1-770875-0 1-794326-0 Duplex2 1-770178-1 1-770875-1 1-794326-1 -- -- -- -- Tin3 1-794065-0 1-794073-0 1-794327-0 Duplex2 1-794065-1 1-794073-1 1-794327-1 -- -- -- -- Tin3 1-770182-0 1-770876-0 1-794432-0 Duplex2 1-770182-1 1-770876-1 1-794432-1 -- -- -- -- Tin3 1-770743-0 1-770858-0 1-794328-0 Duplex2 1-770743-1 1-770858-1 1-794328-1 -- -- -- -- -- -- -- -- Tin3 1-770186-0 1-794040-0 1-794329-0 Duplex2 1-770186-1 1-794040-1 1-794329-1 -- Tin3 1-794066-0 1-770621-0 Duplex2 1-794066-1 1-770621-1 -- -- -- -- -- Tin3 1-794067-0 1-794074-0 -- Duplex2 1-794067-1 1-794074-1 -- -- -- -- -- Tin3 1-770190-0 1-770859-0 1-794330-0 Duplex2 1-770190-1 1-770859-1 1-794330-1 -- -- -- -- Tin3 1-794068-0 1-794075-0 -- Duplex2 1-794068-1 1-794075-1 -- -- -- -- -- Tin3 1-794069-0 1-794076-0 -- Duplex2 1-794069-1 1-794076-1 -- -- -- -- -- Tin3 1-794070-0 1-794077-0 -- Duplex2 1-794070-1 1-794077-1 -- -- -- -- -- Tin3 1-794071-0 1-794078-0 -- Duplex2 1-794071-1 1-794078-1 -- -- -- -- -- Tin3 1-794072-0 1-794079-0 -- Duplex2 1-794072-1 1-794079-1 -- 1Mini-Universal MATE-N-LOK 2 plug and cap housings accept pin or socket contacts. Use the appropriate contacts in the plug housing as required by the mating connector. All Plugs and Caps are free-hanging. 2Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 3Tin Finish -- Plated with .000150 [.00381] min. tin over .000050 [.00127] min nickel underplate on entire contact. 4All PC Board pin headers have 94V-0 flammability rating and can mate to V-0 or V-2 plug housings. Note: All part numbers are RoHS Compliant. 107 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Engineering Notes 108 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors Product Facts Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug and cap design includes molded-in polarizing feature for proper mating Numbered cavities for easy circuit identification Egg crate design of plug half fully encloses socket contacts, reducing shock hazard Molded skirt extension on cap protects pin contacts Strain reliefs for 6 through 36 positions are available Choice of tin or gold plated contacts Not for interrupting current Socket solder tail contacts available for hot side PC Board mounting High density achieved through .165 [4.19] contact centerline spacing Extraction tool removes both pins and sockets Contacts accept 26-18 AWG [.12-.8 mm2] wire sizes and insulation diameters of .025-.115 [.635-2.92] Same applicator crimps pins and sockets Vertical PC Board pin headers are available Pin header standoffs on housings at board interface facilitates gas venting and cooling during soldering Performance Characteristics Technical Documents The Miniature Rectangular Connector performance characteristics found on pages 109-110 are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. Product Specifications 108-1022 (MR) Miniature Rectangular Connectors 108-1078 (MR) Miniature Rectangular Headers Dielectric Withstanding Voltage 2.5 KVAC between adjacent circuits Insulation Resistance-- 1500 megohms minimum initial between adjacent circuits Voltage Rating--250 V AC (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Housings positively lock to help prevent accidental disengagement High Density Application Specification 114-1014 (MR) Miniature Rectangular Contacts Instruction Sheet 408-3231 Pin, Socket, Housing, Contacts, and Accessories Connector Mating-- Split Pin -- 1.0 lb. max. per circuit Connector Unmating-- Split Pin -- .25 lb. min. per circuit Contact Insertion Force-- 1.75 lb. max. per contact Contact Retention--10 lb. min. per contact Durability--25 cycles, mating and unmating Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R Certified by Canadian Standards Association, File No. LR 7189 R 109 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Performance Characteristics Current Rating Verification for 30C Maximum Temperature Rise 100% Energized (Continued) Maximum Current--Maximum current rating of Miniature Rectangular connectors is limited by the maximum operating temperature of the housings which is 105C including the temperature rise of the contacts which is a maximum of 30C. There are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. These variables are: High Density Wire Size--Larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. Longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. Wire-to-Wire MR Calculated Current Table Number of Circuits 2 3 4 6 9 12 15 20 24 36 18 9.00 8.50 7.00 6.00 5.00 4.50 4.50 4.00 4.00 3.50 Wire Gauge 22 6.50 6.00 5.50 5.00 4.00 4.00 3.50 3.50 3.00 2.50 20 8.00 7.00 6.50 6.00 5.00 4.50 4.00 4.00 3.50 3.00 24 5.50 5.00 5.00 4.00 4.00 3.50 3.00 3.00 2.50 2.00 26 5.00 4.50 4.00 4.00 3.50 3.00 2.50 2.50 2.00 2.00 Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded housings being 100% energized. Note: All combinations were not tested and this chart contains interpolated and extrapolated values. (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Connector Size--In general, the more circuits in a connector, the less current can be carried. Ambient Temperature--The higher the ambient temperature, the less current can be carried in any given connector. Minimum Wire Lengths for T-Rise vs. Current Testing Printed Wiring Board Conductor Size--The finished trace conductor width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation. AWG 30 28 26 24 20 Min. Length (in.) 2.6 3.2 4.1 5.1 7.8 AWG 18 16 14 12 10 Min. Length (in.) 9.4 11.3 13.7 16.4 19.3 Note: If wire lengths used are less than those listed above, the currentcarrying ability of the system will be reduced due to less heat being conducted away from the connector. The customer should fully test all applications. Miniature Rectangular connectors also will withstand the following tests: Vibration--10-55-10 cycles per minute at .06 inch total excursion Physical Shock--18 drops, 50 G sawtooth at 10 milliseconds Wire-to-Board Housing Panel Retention-- 50 lb. min. Housing Lock Strength--20 lb. min. Thermal Shock-- -55C to +85C Temperature-Humidity Cycling-- 25C to 65C at 95 RH Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire value should be used. The charted values are only a tool for connector selection and will require the customer to fully test their application. Corrosion--48 hr. at 5% salt concentration Termination Resistance/Contact Crimp Tensile Force Related Product Data Product Specifications 108-1022 (MR) Miniature Rectangular Connectors 108-1078 (MR) Miniature Rectangular Headers Wire Size AWG mm2 26 24 22 20 18 Termination Resistance Test Resistance Current Milliohms (Amps) (Max. Init.) .12 .2 .3 .5 .8 1 1.5 3 4.5 6 5.00 5.00 4.50 4.00 4.00 Contact Crimp Tensile Force Force (Min.) lbs. N 5 22 8 36 14 62 14 62 30 133 Note: This is the total resistance between wire crimps of a mated pin and socket. 110 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) (MR) Miniature Rectangular Connector Mating Combinations Connector Part Number Number of Circuits Flammability Rating 2 UL94V-0 In-Line 1-640507-0 1-640517-0 3 UL94V-0 In-Line 1-640508-0 1-640518-0 4 UL94V-0 Matrix 1-640509-0 1-640519-0 6 UL94V-0 Matrix 1-640510-0 1-640520-0 9 UL94V-0 Matrix 1-640511-0 1-640521-0 12 UL94V-0 Matrix 1-640512-0 1-640522-0 15 UL94V-0 Matrix 1-640513-0 1-640523-0 20 UL94V-0 Matrix 1-640514-0 1-640524-0 24 UL94V-0 Matrix 1-640515-0 1-640525-0 36 UL94V-0 Matrix 1-640516-0 1-640526-0 Mating Connector Part Number PC Board Vertical Pin Headers Plating Tin Duplex1 Tin Duplex1 Tin Duplex1 Tin Duplex1 Tin Duplex1 Tin Duplex1 Tin Duplex1 Tin Duplex1 Tin Duplex1 Tin Duplex1 .062 Board 640497-1 2-640497-2 640498-1 2-640498-2 640499-1 2-640499-2 640500-1 2-640500-2 640501-1 2-640501-2 640502-1 2-640502-2 640503-1 2-640503-2 640504-1 2-640504-2 640505-1 2-640505-2 640506-1 2-640506-2 .120 Board 640497-3 2-640497-4 640498-3 2-640498-4 640499-3 2-640499-4 640500-3 2-640500-4 640501-3 2-640501-4 640502-3 2-640502-4 640503-3 2-640503-4 640504-3 2-640504-4 640505-3 2-640505-4 640506-3 2-640506-4 (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Socket Housing (Plug) Part No. High Density Style Pin Housing (Cap) Part No. 1Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. Note: All part numbers are RoHS Compliant. 111 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Contacts .790 [20.06] Pin diameter .068 [1.73] .660 [16.76] Material Phosphor bronze Stock thickness .008 [.203] Standard Socket Live Split Pin Contact Part Numbers High Density Wire Size Range AWG [mm2] Ins. Dia. Range Finish 26-24 [.12-.2] .025-.050 .635-1.27 Pre-tin 26-182 [.12-.8] .050-.115 1.27-2.92 Select Live Split Pin Gold1 Pre-tin Select Gold1 Standard Socket Strip Form Loose Piece Strip Form Loose Piece 350968-1 640579-1 794000-1 794001-1 350968-2 640579-2 794000-2 794001-2 350967-1 640545-1 641294-1 641300-1 350967-2 640545-2 641294-2 641300-2 HDM Applicator Part No. 466352-13 466352-23 466352-33 466351-13 466351-23 466351-43 Hand Tool Part No. 91534-1 91526-1 1Select Gold Finish -- Plated with .000030 min. [.000762] gold in mating area over .000050 [.00127] min. nickel underplate on entire contact. CMA maximum. 3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 or -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information. 21650 Grounding Pins (Mate first, break last, not for interrupting current) (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Pin diameter .068 [1.73] Stock thickness .008 [.203] Wire Size Range AWG [mm2] Ins. Dia. Range Finish 26-182 [.12-.8] .050-.115 1.27-2.92 Material Grounding Pin Part Numbers Strip Form Loose Piece Pre-tin 350969-1 640580-1 Select Gold1 350969-2 640580-2 HDM Hand Tool Applicator Part No. Part No. 466351-13 466351-23 91526-1 466351-43 1Select Gold Finish--Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact. CMA maximum. 3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 or -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information. Phosphor bronze .850 [21.59] 21650 1.00 [25.4] Solder Tail Socket .165 Typ. [4.19] .165 Typ. [4.19] Material and Finish Phosphor bronze, pre-tin Stock thickness .008 [.203] Part Number 350838-1 Note: Recommended for use with MR Socket Housings .055 [1.39] Dia. Typ. Recommended PC Board Hole Layout .062 [1.57] or .093 [2.36] thick board Keying Plug IS 408-3231 .970 [24.63] Related Product Data Product Specification 108-1022 (MR) Miniature Rectangular Connectors Application Specification 114-1014 (MR) Miniature Rectangular Contacts Performance Characteristics-- pages 109-110 Housings--pages 113-114 Technical Documents-- pages 109 and 205-206 Application Tooling-- pages 207-210 Part Number 350591-1 UL94V-0 Nylon material Note: Use in socket housings only. Contact Extraction Tool Part No. 455822-2 IS 408-9570 Contact Insertion Tool (For inserting contacts applied to small diameter wire) Part No. 455830-1 IS 408-7984 Note: All part numbers are RoHS Compliant. 112 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Housings Free-Hanging or Panel Mount 2 and 3 Circuit, In-Line 1.060 [26.92] Fingergrip .435 [11.05] .165 [4.19] Centerline spacing .290 [7.37] Material 1 Nylon, Natural (Color--Brick Red) A C 2 Flammability Rating -- UL94V-0 3 Related Product Data Product Specification 108-1022 (MR) Miniature Rectangular Connectors Pin Housing (Cap) .840 [21.34] .510 .290 [12.95] [7.37] High Density 1 B C 2 3 Positive Locking Device Typical Circuit Identification Typical Circuit Identification Socket Housing (Plug) Dimensions Number of Circuits A .455 11.56 .620 15.75 2 3 (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Performance Characteristics-- pages 109-110 Panel Cutout Recommendations-- page 115 Contacts--page 112 Keying Plug-- page 112 Strain Reliefs-- page 116 Commoning Bars--page 116 Technical Documents-- pages 109 and 205-206 Mating Headers--pages 117-118 Positive Locking Device Typical Circuit Identification Part Numbers B .365 9.27 .530 13.46 C .755 19.18 .920 23.37 Pin Housing (Cap) Socket Housing (Plug) 1-640507-0 1-640517-0 1-640508-0 1-640518-0 Note: All part numbers are RoHS Compliant. 4 and 6 Circuit, Matrix 1.060 [26.92] Fingergrip A .435 [11.05] .455 [19.18] .755 [19.18] Positive Locking Device Typical Circuit Identification Pin Housing (Cap) .840 [21.34] A .755 [19.18] .365 [9.27] Positive Locking Device Typical Circuit Identification Socket Housing (Plug) Number of Circuits A Dim. 4 .455 11.56 .620 15.75 6 Part Numbers Pin Housing (Cap) Socket Housing (Plug) 1-640509-0 1-640519-0 1-640510-0 1-640520-0 Note: All part numbers are RoHS Compliant. 113 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Housings Free-Hanging or Panel Mount 9, 12 and 15 Circuit, Matrix 1.060 [26.92] Fingergrip .435 [11.05] A .165 [4.19] Centerline spacing Material .920 [23.37] .620 [15.75] Nylon, Natural (Color--Brick Red) Flammability Rating -- UL94V-0 Product Specification 108-1022 (MR) Miniature Rectangular Connectors High Density Performance Characteristics-- pages 109-110 Panel Cutout Recommendations-- page 115 Contacts--page 112 Keying Plug-- page 112 Strain Reliefs-- page 116 Commoning Bars--page 116 Technical Documents-- pages 109 and 205-206 Mating Headers--pages 117-118 (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Positive Locking Device Typical Circuit Identification Related Product Data Pin Housing (Cap) .840 [21.34] A Typical Circuit Identification .920 [23.37] .530 [13.46] Positive Locking Device Socket Housing (Plug) 20, 24 and 36 Circuit, Matrix 1.060 [26.92] Fingergrip .435 [11.05] A 1.085 [27.56] Typical Circuit Identification .785 [19.94] Positive Locking Device Pin Housing (Cap) .840 [21.34] A .695 [16.51] 1.085 [27.56] Positive Locking Device Typical Circuit Identification Socket Housing (Plug) Number of Circuits 9 12 15 20 24 36 A Dim. .620 .785 .950 .950 1.115 1.610 [15.75] [19.94] [24.13] [24.13] [28.32] [40.89] Part Numbers Pin Housing (Cap) 1-640511-0 1-640512-0 1-640513-0 1-640514-0 1-640515-0 1-640516-0 Socket Housing (Plug) 1-640521-0 1-640522-0 1-640523-0 1-640524-0 1-640525-0 1-640526-0 Note: All part numbers are RoHS Compliant. 114 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Recommended Panel Cutouts for Pin and Socket Housings F Related Product Data Product Specification 108-1022 (MR) Miniature Rectangular Connectors Housings-- pages 113-114 Technical Documents-- pages 109 and 205-206 C E D B A High Density View is from housing entry side Panel Thickness .068 [1.75] Max. 2 3 4 6 9 12 15 20 24 36 Panel Cutout Dimensions A .105 2.67 .105 2.67 .157 3.99 .208 5.28 .208 5.28 .225 5.72 .308 7.82 .308 7.82 .390 9.91 .625 15.86 B .220 5.59 .220 5.59 .280 5.28 .345 8.76 .345 8.76 .475 12.07 .475 12.07 .475 12.07 .475 12.07 .500 12.70 C .475 12.07 .640 16.26 .475 12.07 .475 12.07 .640 16.26 .640 16.26 .640 16.26 .805 20.45 .805 20.45 .800 20.32 D .630 16.00 .795 20.19 .630 16.00 .630 16.00 .795 20.19 .795 20.19 .795 20.19 .960 24.38 .960 24.38 .950 24.13 E .785 19.94 .950 24.13 .785 19.94 .785 19.94 .950 24.13 .950 24.13 .950 24.13 1.115 28.32 1.115 28.32 1.100 27.94 F .430 10.92 .430 10.92 .595 15.11 .760 19.30 .760 19.30 .925 23.50 1.090 27.69 1.090 27.69 1.255 31.88 1.750 44.45 (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Number of Circuits Notes: 1. When mounted in a .060 [1.52] thick panel, the cap's mating end extends .800 [20.32] beyond the panel front; wire end extends .220 [55.88] from the panel rear. Plug mating end extends .580 [14.73] beyond the panel front; wire end extends .220 [55.88] from the panel rear. 2. The panel should be punched so that the housing enters the panel in the same direction as the punch for ease of assembly. 115 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Strain Reliefs One Piece -- Clam Shell Strain Relief Adapting Grommets IS 408-3231 (Illustrated in closed position) IS 408-3231 Material Material Flexible PVC (55/75 Durometer) black color Nylon, Natural (Color--Brick Red) Flammability Rating -- UL94V-0 I.D. I.D. A B A Hinge Hinge I.D. High Density C C B 6, 9, 12, 15 and 20 Circuit Number of Circuits (MR) Miniature Rectangular Connectors .165 [4.20] Centerline 6 9 12 15 20 24 36 A B 24 and 36 Circuit Dimensions I.D. .374 9.50 .420 10.67 .420 10.67 .420 10.67 .560 14.22 .560 14.22 .560 14.22 A .634 16.10 .800 20.32 .790 20.07 .790 20.07 .960 24.38 .900 22.86 .900 22.86 B .760 19.30 .760 19.30 .925 23.50 1.090 27.69 1.090 27.69 1.255 31.88 1.750 44.45 Part Numbers C 1.000 25.4 1.000 25.4 1.000 25.4 1.000 25.4 1.280 23.51 1.280 23.51 1.280 23.51 350373-1 350522-1 Material 6 350374-1 350523-1 9, 12 & 15 480634-1 350524-1 480594-1 Notes: 1. These strain reliefs can be used with either pin or socket housings. 2. Customer supplied: One No. 6 Panhead Type B self-taping screw, 3/8 long. Plating is optional to conform to customer requirements. 3. Strain reliefs are also available in UL94V-2 nylon, black in color. To order strain reliefs in this material use the appropriate dash numbers: 1-XXXXXX-9. Commoning Bars IS 408-3231 Number of Circuits 20, 24 & 36 A .375 9.53 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .500 12.70 .500 12.70 .500 12.70 B .375 9.53 .375 9.53 .375 9.53 .420 10.67 .420 10.67 .420 10.67 .562 14.27 .562 14.27 .562 14.27 Double Stack 4 Circuit .635 [16.12] 3 Circuit .470 [11.93] 2 Circuit .305 [7.74] Brass Stock thickness .008 [.203] Dimensions I.D. .156 3.96 .218 5.54 .296 7.52 .218 5.54 .250 6.35 .281 7.14 .437 11.10 .375 9.53 .312 7.92 Part Numbers 2-350377-0 2-350376-0 2-350375-0 2-350378-1 2-350379-1 2-350380-1 2-380935-0 2-380936-0 2-380937-0 Pin Commoning Bar Finish Pre-tin Gold1 2 Circuit 350020-1 350020-2 Part Numbers 3 Circuit 350021-1 350021-2 4 Circuit 350022-1 350022-2 1Gold Finish--Plated with .000030 [.000762] min. gold over .000050 [.00127] min. nickel underplate on entire contact. Related Product Data Housings--pages 113-114 Notes: 1. Commoning bars can be used to common adjacent pin contacts in any column or row. Maximum stack per pin is two. 2. The above illustrates the proper insertion of the Commoning Bar. 3. Use the mating socket housing to assemble the Commoning Bar onto the pins. Note: All part numbers are RoHS Compliant. Commoning Bar Extraction Tool Part No. 457306-1 IS 408-3231 116 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) PC Board Vertical Pin Headers 2 and 3 Circuit, In-Line .165 [4.19] Centerline spacing .030 [.762] .055 .290 [7.36] .530 [13.46] [1.40] Dia. Typ. Material Housing -- Nylon, Natural (Color-- Brick Red) .150 [3.81] Flammability Rating -- UL94V-0 A .165 Typ. [4.19] Live Pin Contacts -- Phosphor bronze Solder tail diameter .040 [1.02] Recommended PC Board Hole Layout .435 [11.05] B Related Product Data High Density 4 and 6 Circuit, Matrix .030 [.762] .530 [13.46] .150 [3.81] A .055 [1.40] Live Pin Dia. Typ. .455 [11.56] .165 Typ. [4.19] .165 [4.19] .435 [11.05] B (MR) Miniature Rectangular Connectors .165 [4.20] Centerline Product Specification 108-1078 (MR) Miniature Rectangular Headers Dimensions A and B -- page 118 Performance Characteristics-- pages 109-110 Technical Documents-- pages 109 and 205-206 Mating Socket Housings-- pages 113-114 Recommended PC Board Hole Layout 9, 12 and 15 Circuit, Matrix .530 [13.46] .150 [3.81] .030 [.762] A .055 [1.40] Dia. Typ. .165 Typ. [4.19] .620 [15.75] Live Pin .165 Typ. [4.19] B .435 [11.05] Recommended PC Board Hole Layout 117 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) PC Board Vertical Pin Headers 20, 24 and 36 Circuit, Matrix .165 [4.19] Centerline spacing .530 [13.46] .030 [.76] Material .150 [3.81] A .055 Dia. Typ. [1.40] Housing -- Nylon, Natural (Color- Brick Red) .165 [4.19] Typ. Flammability Rating -- UL94V-0 Live Pin Contacts -- Phosphor bronze Solder tail diameter .040 [1.02] Related Product Data High Density (MR) Miniature Rectangular Connectors .165 [4.20] Centerline .165 [4.19] Typ. .435 [11.05] B Product Specification 108-1078 (MR) Miniature Rectangular Headers Dimensions (2 and 3 Circuit, In-Line; 4, 6, 9, 12 and 15 Circuit, Matrix) -- page 118 Performance Characteristics-- pages 109-110 Vertical Pin Headers and Recommended PC Board Hole Layouts--pages 117-118 Technical Documents-- pages 109 and 205-206 Mating Socket Housings-- pages 113-114 .785 [19.94] Recommended PC Board Hole Layout Number of Circuits 2 In-Line 3 In-Line 4 6 9 12 15 20 24 36 Header Part Numbers Tin Duplex Finish Finish1 Dimensions Board Thickness A B .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .062 1.57 .120 3.05 .455 11.56 .455 11.56 .620 15.75 .620 15.75 .455 11.56 .455 11.55 .620 15.75 .620 15.75 .620 15.75 .620 15.75 .785 19.94 .785 19.94 .950 24.13 .950 24.13 .950 24.13 .950 24.13 1.115 28.32 1.115 28.32 1.610 40.89 1.610 40.89 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 .120 3.05 .180 4.57 640497-1 2-640497-2 640497-3 2-640497-4 640498-1 2-640498-2 640498-3 2-640498-4 640499-1 2-640499-2 640499-3 2-640499-4 640500-1 2-640500-2 640500-3 2-640500-4 640501-1 2-640501-2 640501-3 2-640501-4 640502-1 2-640502-2 640502-3 2-640502-4 640503-1 2-640503-2 640503-3 2-640503-4 640504-1 2-640504-2 640504-3 2-640504-4 640505-1 2-640505-2 640505-3 2-640505-4 640506-1 2-640506-2 640506-3 2-640506-4 Mates with Socket Housing Part No. 1-640517-0 1-640518-0 1-640519-0 1-640520-0 1-640521-0 1-640522-0 1-640523-0 1-640524-0 1-640525-0 1-640526-0 1Duplex Finish -- Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. Note: All part numbers are RoHS Compliant. 118 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) Product Facts Low cost, wire-to-wire, wire-to-board and wire-topanel connectors with 4.2 mm centerline Easy mate and unmate with positive latch design Single row, 3-5 positions: receptacles, panel mount or free-hanging plugs Double row, 2-24 positions (even only): receptacles, panel mount or free-hanging plugs, and vertical or right-angle pin headers Available in UL 94V-2 or UL 94V-0 flammability rated nylon Products are lead free to help promote a cleaner environment Intermateable and interchangeable with Molex Mini-Fit, Jr. and intermateable AMP-DUAC connectors Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. 208567 Tyco Electronics Design For Environment (DFE) Standard 230-5 Performance Characteristics Material and Finish Applications Electrical Housings--Nylon, UL 94V-2 and UL 94V-0 Contacts--Brass or Phos. Bronze with tin plating (Lead-Free) or gold plating Voltage--600 VAC Current--9 amps max. in 2-position applications Dielectric Withstanding Voltage-- 1500 VAC min. Insulation Resistance-- 1000 megohms min. Operating Temperature-- -40C to +105C [-40F to +221F] Mechanical Technical Documents Design Objective 108-2112 Application Specification 114-13172 Engineering Test Report 502-1204 VAL-U-LOK Connector System .165 [4.20] Centerline R High Density R Computer motherboards/power supplies Harness assemblies used in the Vending, Gaming and Appliance industries Car alarm systems Heating systems Connector Mating-- 1.55 lb. [6.90 N] max. per circuit Connector Unmating-- .11 lb. [.49 N] min. per circuit Contact Retention-- 4.88 lb. [21.71 N] min. per contact Durability--30 cycles, mating and unmating Molex and Mini-Fit are trademarks of Molex Incorporated. 119 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Contacts Wire Range (AWG) Insulation Range 26-22 .047 - .069 [1.2 - 1.75] 22-18 .060 - .122 [1.50 - 3.10] 16 .071 - .122 [1.8 - 3.10] Material & Finish Brass, Pre-Tin Phos. Brz., Pre-Tin Brass, Gold Phos. Brz., Gold Brass, Pre-Tin Phos. Brz., Pre-Tin Brass, Gold Phos. Brz., Gold Brass, Pre-Tin Phos. Brz., Pre-Tin Brass, Gold Phos. Brz., Gold Pin Socket Strip Form Loose Piece Strip Form Loose Piece 794957-1 794957-3 794957-2 794957-4 794955-1 794955-3 794955-2 794955-4 1586054-1 1586054-3 1586054-2 1586054-4 794958-1 794958-3 794958-2 794958-4 794956-1 794956-3 794956-2 794956-4 1586055-1 1586055-3 1586055-2 1586055-4 1586316-1 1586316-3 1586316-2 1586316-4 1586314-1 1586314-3 1586314-2 1586314-4 1586840-1 1586840-3 1586840-2 1586840-4 1586317-1 1586317-3 1586317-2 1586317-4 1586315-1 1586315-3 1586315-2 1586315-4 1586841-1 1586841-2 1586841-3 1586841-4 Applicator Part Number1 PRO-CRIMPER III Hand Tool Part Number 1385448-X 91387-1 1852668-X 91388-1 1852294-X 1976444-1 Extraction Tool Part Number 1586343-1 For applicator and machine part numbers, contact Technical Support. High Density 1 Socket -- (used in Receptacle Housing) .573 [14.55] Pin -- (used in Plug Housing) .17 [4.4] VAL-U-LOK Connector System .165 [4.20] Centerline .66 [16.8] .18 [4.6] .20 [5.0] .05 [1.3] .33 [8.5] .07 [1.9] .08 [2.0] .053 [1.35] .01.00 [0.20.02] 120 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Housings -- Single Row No. of Positions Panel Mount Plug 1586101-3 1586022-4 1586022-5 3* 4 5 UL 94V-2 Housings Free-Hanging Plug 1586103-3 1586024-4 1586024-5 Receptacle Housing 1586105-3 1586026-4 1586026-5 Panel Mount Plug 1586102-3 1586023-4 1586023-5 UL 94V-0 Housings Free-Hanging Plug 1586104-3 1586025-4 1586025-5 Receptacle Housing 1586106-3 1586027-4 1586027-5 *Note: 3 position housings are First Mate/Last Break. Note: All part numbers are RoHS Compliant. Panel Mount Plug Housing Receptacle Housing Free-Hanging Plug Housing .21 [5.4] .76 [19.3] High Density .81 [20.6] .543 [13.8] .543 [13.8] .165 [4.2] Typ. .12 [3.0] .165 [4.2] Typ. .17 [4.2] Typ. VAL-U-LOK Connector System .165 [4.20] Centerline .15 [3.7] .21 [5.4] .54 [13.8] Headers -- Single Row, Vertical No. of 3* 4 5 UL 94V-2 Housings With Drain Holes Without Drain Holes 2029054-3 2029058-3 2029054-4 2029058-4 2029054-5 2029058-5 UL 94V-0 Housings With Drain Holes 2029056-3 2029056-4 2029056-5 *Note: 3 position housings are First Mate/Last Break. Note: All part numbers are RoHS Compliant. .165 Typ. [4.2] Ref. Position #1 Identification Feature .213 [5.4] .138 .012 [3.5 0.3] .492 [12.49] .504 [12.8] .107 [2.73] 121 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Housings -- Double Row No. of Positions Panel Mount Plug 794953-2 794953-4 794953-6 794953-8 1-794953-0 1-794953-2 1-794953-4 1-794953-6 1-794953-8 2-794953-0 2-794953-2 2-794953-4 2 4 6 8 10 12 14 16 18 20 22 24 UL 94V-2 Housings Free-Hanging Plug 1586000-2 1586000-4 1586000-6 1586000-8 1-1586000-0 1-1586000-2 1-1586000-4 1-1586000-6 1-1586000-8 2-1586000-0 2-1586000-2 2-1586000-4 Receptacle Housing 794954-2 794954-4 794954-6 794954-8 1-794954-0 1-794954-2 1-794954-4 1-794954-6 1-794954-8 2-794954-0 2-794954-2 2-794954-4 Panel Mount Plug 1586018-2 1586018-4 1586018-6 1586018-8 1-1586018-0 1-1586018-2 1-1586018-4 1-1586018-6 1-1586018-8 2-1586018-0 2-1586018-2 2-1586018-4 UL 94V-0 Housings Free-Hanging Plug 1586017-2 1586017-4 1586017-6 1586017-8 1-1586017-0 1-1586017-2 1-1586017-4 1-1586017-6 1-1586017-8 2-1586017-0 2-1586017-2 2-1586017-4 Receptacle Housing 1586019-2 1586019-4 1586019-6 1586019-8 1-1586019-0 1-1586019-2 1-1586019-4 1-1586019-6 1-1586019-8 2-1586019-0 2-1586019-2 2-1586019-4 High Density Note: Plug housings accept pin contacts and receptacle housings accept socket contacts on page 114. Note: All part numbers are RoHS Compliant. Panel Mount Plug Housing Free-Hanging Plug Housing Receptacle Housing VAL-U-LOK Connector System .165 [4.20] Centerline .17 [4.2] .94 [23.9] .17 [4.2] .17 [4.2] .94 [23.9] .39 [9.8] .17 [4.2] Housings -- Colored Color No. of Positions Black Red Blue 2-24 4-24 6-24 Panel Mount Plug X-2029088-X X-2029089-X X-2029095-X UL 94V-2 Housings Free-Hanging Plug X-2029027-X X-2029090-X X-2029096-X Receptacle Housing X-1586075-X X-2029091-X X-2029097-X Panel Mount Plug X-2029035-X X-2029092-X X-2029098-X UL 94V-0 Housings Free-Hanging Plug X-2029028-X X-2029093-X X-2029099-X Receptacle Housing X-2029029-X X-2029094-X X-2029100-X Note: Plug housings accept pin contacts and receptacle housings accept socket contacts on page 114. Note: All part numbers are RoHS Compliant. 122 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Pin Headers No. of Positions w/o Pegs 1586037-2 1586037-4 1586037-6 1586037-8 1-1586037-0 1-1586037-2 1-1586037-4 1-1586037-6 1-1586037-8 2-1586037-0 2-1586037-2 2-1586037-4 2 4 6 8 10 12 14 16 18 20 22 24 UL 94V-2 Pin Headers Right-Angle w/Pegs w/o Pegs Screw Mount 1586039-2 1586041-2 1586043-2 1586039-4 1586041-4 1586043-4 1586039-6 1586041-6 1586043-6 1586039-8 1586041-8 1586043-8 1-1586039-0 1-1586041-0 1-1586043-0 1-1586039-2 1-1586041-2 1-1586043-2 1-1586039-4 1-1586041-4 1-1586043-4 1-1586039-6 1-1586041-6 1-1586043-6 1-1586039-8 1-1586041-8 1-1586043-8 2-1586039-0 2-1586041-0 2-1586043-0 2-1586039-2 2-1586041-2 2-1586043-2 2-1586039-4 2-1586041-4 2-1586043-4 UL 94V-0 Pin Headers Vertical Right-Angle w/o Pegs w/Pegs w/o Pegs Screw Mount 1586038-2 1586040-2 1586042-2 1586044-2 1586038-4 1586040-4 1586042-4 1586044-4 1586038-6 1586040-6 1586042-6 1586044-6 1586038-8 1586040-8 1586042-8 1586044-8 1-1586038-0 1-1586040-0 1-1586042-0 1-1586044-0 1-1586038-2 1-1586040-2 1-1586042-2 1-1586044-2 1-1586038-4 1-1586040-4 1-1586042-4 1-1586044-4 1-1586038-6 1-1586040-6 1-1586042-6 1-1586044-6 1-1586038-8 1-1586040-8 1-1586042-8 1-1586044-8 2-1586038-0 2-1586040-0 2-1586042-0 2-1586044-0 2-1586038-2 2-1586040-2 2-1586042-2 2-1586044-2 2-1586038-4 2-1586040-4 2-1586042-4 2-1586044-4 Vertical High Density Note: All Headers have Brass, Tin-Plated contacts. Note: All part numbers are RoHS Compliant. Vertical Pin Headers (Part No. 1586037 shown w/o pegs) Right-Angle Pin Headers (Part No. 1586043 Screw Mount) VAL-U-LOK Connector System .165 [4.20] Centerline Position 1 Identification Feature .17 [4.2] .384 [9.75] .17 [4.2] .165 [4.20] Position 1 Identification Feature .50 [12.8] .50 [12.8] .14 [3.5] .165 [4.20] .17 [4.2] .22 [5.5] .14 [3.5] .165004 [4.200.10] .055002 [1.400.05] Typ. Circuit 1 .118002 [3.000.05] .018003 [0.460.08] .22.00 [5.50.1] .217004 [5.500.10] .165004 [4.200.10] Typ. .185003 [4.700.08] 2X .165 [4.20] Typ. .217 [5.50] .177 [4.50] .165 [4.20] .071 [1.80] Circuit 1 .126 [3.20] 2X PCB Layout: Component Side (screw mount shown) Recommended Board Thickness .063 [1.60] PCB Layout: Component Side (shown with pegs) Recommended Board Thickness .070 [1.78] 123 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Blindmate Headers A B Dimensions C D E 2 -- 4 4.2 [0.17] 8.4 [0.33] 12.6 [0.50] 16.8 [0.66] 21.0 [0.83] 25.2 [0.99] 29.4 [1.58] 33.6 [1.32] 37.8 [1.49] 42.0 [1.65] 46.2 [1.82] 5.4 [0.21] 9.6 [0.38] 13.8 [0.54] 18.0 [0.71] 22.2 [0.87] 26.4 [1.04] 30.6 [1.20] 34.8 [1.37] 39.0 [1.54] 43.2 [1.70] 47.4 [1.87] 51.6 [2.03] 9.4 [0.37] 13.6 [0.54] 17.8 [0.70] 22.0 [0.87] 26.2 [1.03] 30.4 [1.20] 34.6 [1.36] 38.8 [1.53] 43.0 [1.69] 47.2 [1.86] 51.4 [2.02] 55.6 [2.19] 10.8 [0.43] 15.0 [0.59] 19.2 [0.76] 23.4 [0.92] 27.6 [1.09] 31.8 [1.25] 36.0 [1.42] 40.2 [1.58] 44.4 [1.75] 48.6 [1.91] 52.0 [2.08] 57.0 [2.24] 13.2 [0.52] 17.4 [0.69] 21.6 [0.85] 25.8 [1.02] 30.0 [1.18] 34.2 [1.35] 38.4 [1.51] 42.6 [1.69] 46.8 [1.84] 51.0 [2.01] 55.2 [2.17] 59.4 [2.32] 6 8 10 12 14 16 High Density UL 94V-2 Housings With Without Drain Holes Drain Holes No. of Pos. 18 20 22 24 UL 94V-0 Housings With Without Drain Holes Drain Holes 1586585-2 1586586-2 1586587-2 1586588-2 1586585-4 1586586-4 1586587-4 1586588-4 1586585-6 1586586-6 1586587-6 1586588-6 1586585-8 1586586-8 1586587-8 1586588-8 1-1586585-0 1-1586586-0 1-1586587-0 1-1586588-0 1-1586585-2 1-1586586-2 1-1586587-2 1-1586588-2 1-1586585-4 1-1586586-4 1-1586587-4 1-1586588-4 1-1586585-6 1-1586586-6 1-1586587-6 1-1586588-6 1-1586585-8 1-1586586-8 1-1586587-8 1-1586588-8 2-1586585-0 2-1586586-0 2-1586587-0 2-1586588-0 2-1586585-2 2-1586586-2 2-1586587-2 2-1586588-2 2-1586585-4 2-1586586-4 2-1586587-4 2-1586588-4 VAL-U-LOK Connector System .165 [4.20] Centerline Note: All part numbers are RoHS Compliant. 4.20 [.165] Typ. Last Pin A 0.50 0.08 [.020 .003] C .003 15.00 0.20 [.591 .008] 4.2 [.165] 5.6 [.22] 5.50 0.10 [.217 .004] O3.00 0.05 [O.118 .002] 2X O1.40 0.05 [O.055 .002] 16X 4.20 0.10 [.165 .004] Non Cumulative First Pin 5.4 [.21] Circuit 1 4.70 0.08 [.185 .003] 2X D Rib Indicates Circuit 1 E Recommended Hole Layout for 1.78 [.070] Maximum Thick PC Board 14.10 0.20 [.555 .008] 1.80 [.071] 3.50 [.138] B 5.50 [.217] 9.8 [.38] 124 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors Product Facts Free-hanging or panel mount plug housings Vertical header with or without mounting pegs and with or without drain holes Selective loading available on vertical headers 4.2 mm x 4.2 mm centerline Male and female contacts designed for 26-22 AWG and 22-18 AWG wire Receptacle housings accept female contacts with less orientation than competitive product Right-angle headers Designed for power applications Positive latch feature helps prevent disconnection AMP-DUAC (dual action) receptacle contacts Anti-stubbing contact design Polarized housings Intermateable with Molex Mini-Fit Jr. connectors AMP-DUAC Connectors, for power or signal applications, belong to the broad family of Tyco Electronics Soft Shell connectors. Recognized under Component Program of Underwriters Laboratories Inc., File No. E28476 The dual action design of the female receptacle contact provides for low insertion force, yet maintains high-performance current capacity. To help meet your production requirements, semiautomatic bench machines and hand tools are available for strip and loose piece contacts, respectively. R Certified by Canadian Standards Association, File No. LR7189 R High density, 4.2 mm x 4.2 mm [.165 x .165] centerline, dual-row receptacle housings mate with plug housings (freehanging or panel mount) or pc board headers (vertical or right-angle). Selective contact loading is available for vertical headers. All housings are polarized for easier mating and locking latches help maintain reliable connections. AMP-DUAC wire-to-board, wire-to-panel, and wire-towire connectors are intermateable with Molex Mini-Fit Jr. series connectors. Need more information? Call Technical Support. Technical Support is staffed with specialists well versed in Tyco Electronics products. They can provide you with: AMP-DUAC Connectors .165 [4.20] Centerline Wire-to-board and wire-towire connector system High Density Technical Documents Product Specifications 108-1699--Headers 108-19099--Receptacles Application Specification 114-19048--Use of Receptacles Qualification Test Report 501-434 501-576 Technical support Catalogs Technical Documents Product Samples Tyco Electronics Authorized Distributor Locations Performance Data Voltage Rating--600 VAC Current Rating--9 amps maximum in 2 position applications Low Level Resistance-- 10 megohms max. Dielectric Withstanding Voltage-- 1500 VAC/min. Insulation Resistance-- 1000 megohms minimum Operating Temperature-- -55C to +105C [-67F to +221F] 125 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Receptacle Housings N x 4.2=M [N x .165=M] 4.2 [.165] 2-24 Position Housings 11.7 [.460] Accept female contacts. 4.2 [.165] Material 9.7 [.391] Housings-- Nylon UL 94V-2, Natural color UL 94V-0, White color L Related Product Data 18.7 [.736] Number of Positions 2 High Density Mate with--Vertical headers (pages 128-133), right-angle headers (page 128) and plug housings (page 127). Contacts-- See below. Strain Relief-- See below and page 127. Technical Documents-- pages 125 and 205-206 4 6 8 10 12 AMP-DUAC Connectors .165 [4.20] Centerline 14 Strain Relief, 6 Position Part Number 1375618-1 16 Used with plug or receptacle housings. 18 20 Wire Bundle Range-- 4.19-5.59 [.165-.220] Material-- Nylon, UL 94V-2, Natural color 22 24 Dimensions Part Number UL 94V-2 UL 94V-0 Natural White L M N 5.5 .216 9.7 .381 13.9 .547 18.1 .712 22.3 .877 26.5 1.043 30.7 1.208 34.9 1.374 39.1 1.539 43.3 1.704 47.5 1.870 51.7 2.035 -- 1 106527-2 794657-2 4.2 .165 8.4 .330 12.6 .496 16.8 .661 21.0 .826 25.2 .992 29.4 1.157 33.6 1.322 37.8 1.488 42.0 1.653 46.2 1.818 1 106527-4 794657-4 2 106527-6 794657-6 3 106527-8 794657-8 4 1-106527-0 1-794657-0 5 1-106527-2 1-794657-2 6 1-106527-4 1-794657-4 7 1-106527-6 1-794657-6 8 1-106527-8 1-794657-8 9 2-106527-0 2-794657-0 10 2-106527-2 2-794657-2 11 2-106527-4 2-794657-4 Female Contacts Used in receptacle housings. 14.80 Ref 14.80 Ref. [.582] Material-- Phos. Bronze Application Tooling-- See chart and pages 207-210 Technical Documents Product Specifications 108-1699 AMP-DUAC Header 108-19099 AMP-DUAC Receptacle Application Specification 114-19048 AMP-DUAC Receptacle Contact Ins. Dia. Range Plating 22-18 [.3-.8] 1.5-2.4 .059-.094 26-22 [.12-.3] 1.3-1.75 .047-.069 2@18 or 16 [.8-.9] [1.29] Applicator Part Number Part Number Wire Size Range AWG [mm2] 3.3 Total Max. .130 Strip Form Loose Piece Tin Gold Tin Gold 106529-2 1-794138-3 106528-2 1-794139-3 1-106529-2 1-794141-3 1-106528-2 1-794142-3 Tin Gold 794418-1 1-794140-3 794421-1 1-794143-3 for for AMP-O-MATIC CERTI-CRIMP AMP-O-LECTRIC Stripper/Crimper Hand Tool Bench Machine Machine Part Number 680308-* 567959-1 734202-2 680307-* 567960-1 -- 680350-* -- 90714-1 Extraction Tool Part Number 188688-1 *Part Number suffix "-2" indicates Applicator for Model K Machine and "-3" for Model G Machine. Note: All part numbers are RoHS Compliant. 126 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Plug Housings L 4.00 1.6 2-24 Position Housings Accept male contacts. [.098] 10.0 5.6 [.394] [.220] 9.6 Material 2.5 [.157] [.063] M [.38] Recommended Cutout for 2.00 [.079] Max. Thick Panel Housings-- Nylon UL 94V-2, Natural color UL 94V-0, White color Related Product Data 23.9 Mate with--Receptacle housings (page 126) Contacts-- See below. Strain Relief-- See below. Technical Documents-- pages 125 and 205-206 [.94] Number of Positions 2 4 6 8 10 12 Used with plug or receptacle housings. 14 Wire Bundle Range-- 4.19-5.59 [.165-.220] Material-- Nylon, UL 94V-2, Natural color 16 18 20 22 24 794542-2 794550-2 *794594-2 *794598-2 794542-4 794550-4 *794594-4 *794598-4 794542-6 794550-6 *794594-6 *794598-6 794542-8 794550-8 *794594-8 *794598-8 1-794542-0 1-794550-0 *1-794594-0 *1-794598-0 1-794542-2 1-794550-2 *1-794594-2 *1-794598-2 1-794542-4 1-794550-4 *1-794594-4 *1-794598-4 1-794542-6 1-794550-6 *1-794594-6 *1-794598-6 1-794542-8 1-794550-8 *1-794594-8 *1-794598-8 2-794542-0 2-794550-0 *2-794594-0 *2-794598-0 2-794542-2 2-794550-2 *2-794594-2 *2-794598-2 2-794542-4 2-794550-4 *2-794594-4 *2-794598-4 AMP-DUAC Connectors .165 [4.20] Centerline Strain Relief, 6 Position Part Number 1375618-1 Part Number UL 94V-2, Natural UL 94V-0, White Free-Hanging Panel Mount Free-Hanging Panel Mount High Density Dimensions L M 5.4 10.8 .213 .425 9.6 15.0 .378 .591 13.8 19.2 .543 .756 18.0 23.4 .709 .921 22.2 27.6 .874 1.087 26.4 31.8 1.039 1.252 30.6 36.0 .205 1.417 34.8 40.2 1.370 1.583 39.0 44.4 1.535 1.748 43.2 48.6 1.701 1.913 47.4 52.8 1.866 2.079 51.6 57.0 2.032 2.244 *Call for availability. Male Contacts Used in plug housings. 16.86 Ref. [.664] Material-- Phos. Bronze Application Tooling-- See chart and pages 207-210 Part Number Wire Size Range AWG [mm2] Ins. Dia. Range Plating 22-18 [.3-.8] 1.5-2.4 .059-.094 Tin Gold Strip Form Loose Piece 794576-1 794576-4 794577-1 ---- Applicator Part Number for for AMP-O-MATIC AMP-O-LECTRIC Stripper/Crimper Bench Machine Machine 680308-* 567959-1 26-22 1.3-1.75 Tin 794578-1 794579-1 680307-* 567960-1 [.12-.3] .047-.069 Gold 794578-4 ---- *Part Number suffix "-2" indicates Applicator for Model K Machine and "-3" for Model G Machine. CERTI-CRIMP Hand Tool Part Number 734202-2 -- Note: All part numbers are RoHS Compliant. 127 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies 3.5 0.3 [.137 .012] 2, 4 and 6 Position, with and without Pegs and with and without Drain Holes 8.4 Ref. [.330] 17.8 Ref. [.700] 4.70 0.08 [.185 .003] 8.4 Ref. [.330] 5.5 0.1 [.217 .004] 2.9 [.114] Material and Finish .46 0.08 [.018 .003] 21.0 [.826] Ref. Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy 4.2 0.1 [.165 .004] Recommended PC Board Layout 4.2 [.165] Typ. Related Product Data Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 4.2 [.165] Typ 8.4 Ref. [.330] AMP-DUAC Connectors .165 [4.20] Centerline High Density 13.8 [.543] Number of Positions 2 4 6 Part Number PCB Pegs Drain Holes Plating N N Y Y N N Y Y Y Y N N Y Y N N Y Y N N Y Y N N N N N N Y Y Y Y N N N N Y Y Y Y Y Y Y Y N N N N Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold UL 94V-2, Natural 1586491-2 1586492-2 1586489-2 1586490-2 1-794349-1 1-794349-2 1-794302-1 1-794302-2 1586489-4 1586490-4 1586491-4 1586492-4 1-794303-1 1-794303-2 1-794350-1 1-794350-2 1-794304-1 1-794304-2 1-794351-1 1-794351-2 1586489-6 1586490-6 1586491-6 1586492-6 UL 94V-0, White 1586495-2 1586496-2 1586493-2 1586494-2 1-794543-1 1-794543-2 1-794540-1 1-794540-2 1586493-4 1586494-4 1586495-4 1586496-4 1-794466-1 1-794466-2 1-794484-1 1-794484-2 1-794467-1 1-794467-2 1-794485-1 1-794485-2 1586493-6 1586494-6 1586495-6 1586496-6 Note: All part numbers are RoHS Compliant. 128 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies (Continued) 8 and 10 Position, with and without Pegs and with and without Drain Holes 3.5 0.3 [.137 .012] 16.8 [.661] Ref. 2.9 [.114] 26.2 [1.03] Ref. Material and Finish 4.70 0.08 [.185 .003] 29.4 [1.15] Ref. Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy 4.2 [.165] Typ. 16.8 [.661] Ref. 5.5 0.1 [.217 .004] .46 0.08 [.018 .003] 4.2 0.1 [.165 .004] Related Product Data Recommended PC Board Layout Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 4.2 [.165] Typ. 16.8 Ref. [.661] Number of Positions 10 Part Number PCB Pegs Drain Holes Plating Y Y N N Y Y N N Y Y N N Y Y N N N N N N Y Y Y Y N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold UL 94V-2, Natural 1586489-8 1586490-8 1586491-8 1586492-8 1-794305-1 1-794305-2 1-794352-1 1-794352-2 1-1586489-0 1-1586490-0 1-1586491-0 1-1586492-0 1-794306-1 1-794306-2 1-794353-1 1-794353-2 UL 94V-0, White 1586493-8 1586494-8 1586495-8 1586496-8 1-794468-1 1-794468-2 1-794486-1 1-794486-2 1-1586493-0 1-1586494-0 1-1586495-0 1-1586496-0 1-794469-1 1-794469-2 1-794487-1 1-794487-2 AMP-DUAC Connectors .165 [4.20] Centerline 8 High Density 22.2 [.874] Note: All part numbers are RoHS Compliant. 129 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies (Continued) 3.5 0.3 [.137 .012] 12 Position, with and without Pegs and with and without Drain Holes 21.0 [.826] Ref. 30.4 [1.19] Ref. 2.9 [.114] 4.70 0.08 [.185 .003] 33.6 [1.32] Ref. Material and Finish High Density 4.2 0.1 [.165 .004] 5.5 0.1 [.217 .004] Recommended PC Board Layout 4.2 [.165] Typ. 21.0 Ref. [.826] 26.4 [1.03] Related Product Data AMP-DUAC Connectors .165 [4.20] Centerline 0.46 0.08 [.118 .003] 4.2 [.165] Typ. Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 21.0 [.826] Ref. Number of Positions PCB Pegs Drain Holes Plating 12 Y Y N N Y Y N N N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold 14 Position, with and without Pegs and with and without Drain Holes 3.5 0.3 [.137 .012] Part Number UL 94V-2, Natural 1-1586489-2 1-1586490-2 1-1586491-2 1-1586492-2 1-794307-1 1-794307-2 1-794354-1 1-794354-2 UL 94V-0, White 1-1586493-2 1-1586494-2 1-1586495-2 1-1586496-2 1-794470-1 1-794470-2 1-794488-1 1-794488-2 25.2 [.992] Ref. 34.6 [1.36] Ref. 2.9 [.114] 4.70 0.08 [.185 .003] Material and Finish Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy 25.2 [.992] Ref. 5.5 0.1 [.217 .004] 37.8 [1.49] Ref. .46 0.08 [.018 .003] 4.2 [.165] Typ. 4.2 0.1 [.165 .004] Recommended PC Board Layout Related Product Data Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 25.2 Ref. [.992] 4.2 [.165] Typ. 30.6 [1.20] Number of Positions PCB Pegs Drain Holes Plating Part Number 14 Y Y N N Y Y N N N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold UL 94V-2, Natural 1-1586489-4 1-1586490-4 1-1586491-4 1-1586492-4 1-794308-1 1-794308-2 1-794355-1 1-794355-2 UL 94V-0, White 1-1586493-4 1-1586494-4 1-1586495-4 1-1586496-4 1-794453-1 1-794453-2 1-794489-1 1-794489-2 Note: All part numbers are RoHS Compliant. 130 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies (Continued) 29.4 [1.15] Ref. 3.5 0.3 [.137 .012] 38.8 [1.53] Ref. 16 Position, with and without Pegs and with and without Drain Holes 2.9 [.114] 4.70 0.08 [.185 .003] 42.0 [1.65] Ref. Material and Finish 4.2 0.1 [.165 .004] 5.5 0.1 [.217 .004] Recommended PC Board Layout 29.4 Ref. [1.15] 34.8 [1.37] Related Product Data 4.2 [.165] Typ. Number of Positions PCB Pegs Drain Holes Plating Part Number 16 Y Y N N Y Y N N N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold UL 94V-2, Natural 1-1586489-6 1-1586490-6 1-1586491-6 1-1586492-6 1-794309-1 1-794309-2 1-794356-1 1-794356-2 AMP-DUAC Connectors .165 [4.20] Centerline 33.6 [1.32] Ref. 3.5 0.3 [.137 .012] 2.9 [.114] 33.6 [1.69] Ref. 29.4 [1.15] Ref. 4.70 0.08 [.185 .003] Material and Finish 46.2 [1.81] Ref. Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy 4.2 [.165] Typ. .46 0.08 [.018 .003] Related Product Data Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 UL 94V-0, White 1-1586493-6 1-1586494-6 1-1586495-6 1-1586496-6 1-794429-1 1-794429-2 1-794490-1 1-794490-2 High Density 18 Position, with and without Pegs and with and without Drain Holes 0.46 0.08 [.118 .003] 4.2 [.165] Typ. Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 29.4 [1.16] Ref. 4.2 [.165] Typ. 33.6 Ref. [1.32] 39.0 [1.53] Number of Positions PCB Pegs Drain Holes Plating 18 Y Y N N Y Y N N N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold 4.2 0.1 [.165 .004] 5.5 0.1 [.217 .004] Recommended PC Board Layout Part Number UL 94V-2, Natural 1-1586489-8 1-1586490-8 1-1586491-8 1-1586492-8 1-794310-1 1-794310-2 1-794357-1 1-794357-2 UL 94V-0, White 1-1586493-8 1-1586494-8 1-1586495-8 1-1586496-8 1-794454-1 1-794454-2 1-794491-1 1-794491-2 Note: All part numbers are RoHS Compliant. 131 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies 3.5 0.3 [.137 .012] 37.8 [1.48] Ref. (Continued) 20 Position, with and without Pegs and with and without Drain Holes 50.4 [1.98] Ref. 4.2 [.165]Typ. Material and Finish Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy 47.2 [1.85] Ref. 37.8 [1.48] Ref. 4.70 0.08 [.185 .003] 2.9 [.114] .46 0.08 [.018 .003] 4.2 0.1 [.165 .004] 5.5 0.1 [.217 .004] Recommended PC Board Layout 4.2 [.165]Typ. 37.8 Ref. [1.48] 43.2 [1.70] Related Product Data High Density Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 AMP-DUAC Connectors .165 [4.20] Centerline High Temperature Headers IR Reflow compatible, UL 94V-0, Black color 22 Position, with and without Pegs and with and without Drain Holes Number of Positions PCB Pegs Drain Holes Plating 20 Y Y N N Y Y N N N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold Number of Positions PCB Pegs Drain Holes Plating 20 N N N N Tin 30 Gold 3.5 0.3 [.137 .012] UL 94V-0, White 2-1586493-0 2-1586494-0 2-1586495-0 2-1586496-0 1-794455-1 1-794455-2 1-794492-1 1-794492-2 Part Number UL 94V-0, Black 1-794415-1 1-794415-2 42.0 [1.65] Ref. 51.4 [2.02] Ref. 42.0 [1.65] Ref. 4.70 0.08 [.185 .003] 2.9 [.114] Material and Finish 54.6 [2.14] Ref. 4.2 [.165] Typ. Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy .46 0.08 [.018 .003] 4.2 0.1 [.165 .004] 5.5 0.1 [.217 .004] Recommended PC Board Layout 4.2 Typ. [.165] 42.0 Ref. [1.65] 47.4 [1.87] Related Product Data Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 Part Number UL 94V-2, Natural 2-1586489-0 2-1586490-0 2-1586491-0 2-1586492-0 1-794311-1 1-794311-2 1-794358-1 1-794358-2 Number of Positions PCB Pegs Drain Holes Plating Part Number 22 Y Y N N Y Y N N N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold UL 94V-2, Natural 2-1586489-2 2-1586490-2 2-1586491-2 2-1586492-2 1-794312-1 1-794312-2 1-794359-1 1-794359-2 UL 94V-0, White 2-1586493-2 2-1586494-2 2-1586495-2 2-1586496-2 1-794471-1 1-794471-2 1-794493-1 1-794493-2 Note: All part numbers are RoHS Compliant. 132 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies 3.5 0.3 [.137 .012] 46.2 [1.81] Ref. (Continued) 24 Position, with and without Pegs and with and without Drain Holes 58.8 [2.13] Ref. .46 0.08 [.018 .003] 4.2 [.165] Typ. Material and Finish 4.2 0.1 [.165 .004] Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- 0.25 [.010] thick copper alloy Recommended PC Board Layout Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 PCB Pegs Drain Holes Plating Part Number 24 Y Y N N Y Y N N N N N N Y Y Y Y Tin 30 Gold Tin 30 Gold Tin 30 Gold Tin 30 Gold UL 94V-0, White 2-1586493-4 2-1586494-4 2-1586495-4 2-1586496-4 1-794472-1 1-794472-2 1-794494-1 1-794494-2 12.80 [.504] 1.400.05 [.06.002] 2-24 Position, with Pegs and without Drain Holes 3.20 [.126] 3.8 Ref. [.150] 10.0 0.40 [.016] Housing-- Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts-- Copper alloy 1.067 Sq. [.042] [.394] 4.2 [.165] 6.4 [.252] 5.500.10 [.2170.004] 7.300.08 [.2870.003] 3.50.5 [.14.02] 5.500.10 [.22.004] 4.20.1[.1650.004] Typ. Non-Cumulative Recommended Mounting Hole Pattern For 1.78 [.070] Max. Thick PC Board (Component Side Shown) 6.4 [.252] Number of Positions 2 4 6 8 10 12 14 16 18 20 22 24 Part Number PCB Pegs Drain Holes Plating Y Y Y Y Y Y Y Y Y Y Y Y N N N N N N N N N N N N Tin Tin Tin Tin Tin Tin Tin Tin Tin Tin Tin Tin UL 94V-2, Natural 1-794507-1 1-794508-1 1-794448-1 1-794509-1 1-794510-1 1-794511-1 1-794512-1 1-794513-1 1-794514-1 1-794449-1 1-794515-1 1-794516-1 UL 94V-0, White 1-794526-1 1-794527-1 1-794528-1 1-794529-1 1-794530-1 1-794531-1 1-794532-1 1-794533-1 1-794588-1 1-794534-1 1-794589-1 1-794590-1 Note: All part numbers are RoHS Compliant. Catalog 82181 Revised 4-08 www.tycoelectronics.com AMP-DUAC Connectors .165 [4.20] Centerline 3.250.05 [.128.002] 9.6 [.378] Mate with--Receptacle housings (page 126). Technical Documents-- pages 125 and 205-206 UL 94V-2, Natural 2-1586489-4 2-1586490-4 2-1586491-4 2-1586492-4 794313-3 794313-4 1-794360-1 1-794360-2 High Density Number of Positions Right-Angle Header Assemblies Related Product Data 5.5 0.1 [.217 .004] 4.2 Typ. [.165] 46.2 Ref. [1.81] 51.6 [2.03] Related Product Data Material and Finish 55.6 [2.18] Ref. 46.2 [1.81] Ref. 4.70 0.08 [.185 .003] 2.9 [.114] Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. 133 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP Engineering Notes 134 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208