L Selection Guide . . . . . . . . . . . . . L-2 * PS5R Series -- DIN Rail Switching . . . . . . . . L-3 * PS3E Series --Metal Frame Switching. . . . . . L-10 Power Supplies Section Power Supplies Selection Guide Selection Guide PS5R PS3E Apearance Page Housing Mounting Wattage Range L-3 Metal DIN Rail or surface mount "L" bracket or DIN rail bracket 7.5W to 240W 10W to 150W 100 to 240VAC nominal, (85 to 264VAC), 47 to 63 HZ 110-340VDC nominal (105 to 370VDC) 1.5A, 2.5A 0.6A, 1.2A, 2.5A 0.30A, 0.60A, 1.3A, 2.1A, 4.2A 73% to 75% 75% to 85% 100 to 240VAC nominal, (85 to 264VAC), 47 to 63 HZ 110-340VDC nominal (105 to 370VDC) - 0.90A, 1.4A, 2.5A, 4.4A, 8.4A, 12.5A 0.50A, 0.70A, 1.3A, 2.4A, 4.2A, 6.3A 74% to 80% 78% to 82% +/-10% (V.ADJ control on front) +/-10% (V.ADJ control on front) Due to input voltage change: 0.4% maximum Due to ambient temperature change: 0.05% maximum 12V: 48mV maximum 24V: 96mV maximum 12V: 120mV maximum 24V: 150mV maximum 12V: 150mV maximum 24V: 290mV maximum 2% peak to peak maximum (including noise) 150mV maximum 105% typical 105% typical 120% minimum (Zener or auto reset) 120% minimum (Zener or auto reset) 50A maximum (cold start at 200VAC) 40A maximum (cold start at 200VAC) 0.75mA maximum at 60hz 0.75mA maximum at 60hz -10 to +60C (14 to 140F) -10 to +60C (14 to 140F) Vibration Resistance 45m/s2 (approximately 4.5G) 10 to 55hz, 2 hours on each of 3 axes 20m/s2 (approximately 2G) 10 to 55hz, 1 hour on each of 3 axes Shock Resistance 294m/s2, 3 shocks on each of 6 axes 200m/s2, 1 shock on each of 3 axes Weight (approximate) Termination 150g to 600g (depending on model) 240g to 800g (depending on model) M3.5 phillip/slotted, spring loaded, captive (fingersafe) IEC Style screw terminals (fingersafe) Input Voltage 5VDC 12VDC 24VDC 12VDC 24VDC Output Current Ratings Typical Efficiency Voltage Adjustments Output Voltage Fluctuation L L-10 Plastic Ripple Voltage Over Voltage Protection (input) Over Current Protection (output) Inrush Current Leakage Current (output) Operating Temperature Due to output load change: 1.5% maximum Conforms to EMC Directives EN50081-2 and EN50082-2. LVD Directives EN60529 and EN60950. Cert. No. BL980213332392 Cert. No. B961113332372 UL 508 Listed UL 1950 Recognized File # E177168 File # E141913 Approvals File #LR88916 FCC Class A certified (EN550011) L-2 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies PS5R Series PS5R Series -- Switching Power Supplies The PS5R offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities. With UL 508 Listing, additional savings in space and cost can be realized as no derating is necessary. Key features of the PS5R series include: * No jumpers or dip switches * Universal AC input (85 to 264 V AC) (except 100W) * DC compatible input (105 to 370V DC) * Unique spring-up, fingersafe terminals (ideal for ring lug terminated wire) * DIN rail or panel mount * Six output capacities * UL508 Listing * CE marking according to both LVD and EMC * Fused input * Auto resetting output overcurrent protection * Output voltage adjust (10%) Conforms to EMC Directives EN50081-2 and EN50082-2. LVD Directive: EN60529. Certified to EN60950. 240W also conforms to EN61000-3-2 L Cert. No. BL980213332392 UL 508 Listed File # E177168 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-3 Power Supplies PS5R Series PS5R-A05 PS5R-A12 PS5R-A24 5VDC output Part Numbers 12VDC output 24VDC output Output Capacity PS5R-B05* PS5R-B12 PS5R-B24 7.5W Input Voltage (single-phase, 2wire) 15W -- PS5R-C12 PS5R-C24 30W -- -- PS5R-D24 50W 100 to 240VAC nominal (85 to 264V AC), 50/60Hz (47 to 63Hz) 110 to 340VDC nominal (105 to 370VDC) -- -- PS5R-E24 -- -- PS5R-G24 100W 240W 100 to 120VAC, 50/60Hz 200 to 240VAC, 50/60Hz 100 to 240VAC, 50/60Hz 110 to 340VDC Input (jumper selectable) 240 to 370VDC Input Current (typical) 0.17A at 100VAC 0.11A at 200VAC 0.3A at 100VAC 0.2A at 200VAC 0.68A at 100VAC 0.45A at 200VAC 1.15A at 100VAC 2.5A at 100VAC 0.75A at 1.5A at 200VAC 200VAC 4A at 100VAC Internal Fuse Rating Inrush Current Leakage Current (at no load) 2A 2A 3.15A 3.15A 4A 6.3A 50A maximum (at cold start at 200V AC) Typical Efficiency 73% at 12V 75% at 24V Overvoltage Protection Outputs turns off at 105% (typical) 5V, 1.5A 5V, 2.5A 12V, 0.6A 12V, 1.2A 24V, 0.3A 24V, 0.6A Voltage Adjustments Output Holding Time Rise Time Line Regulation Load Regulation Fluctuation due to Ambient Temperature Change Ripple Voltage Overload Protection Operation Indicator Output Specifications Voltage and Current Ratings Parallel Operation Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature Operating Humidity L 0.75mA maximum (60Hz, measured in conformance with UL, CSA, VDE) Dimensions (H x W x D) Termination IP protection 75% at 12V 75% at 24V 79% at 24V 85% at 24V 83% at 24V 12V, 2.5A 24V, 1.3A 24V, 2.1A 24V, 4.2A 24V, 10A 10% (V.ADJ screw on top) 20ms minimum (at full rated input and output) 200ms maximum (at full rated input and output) 150ms maximum 0.4% maximum 1.5% maximum 0.05% maximum 2% peak to peak maximum (including noise) 120% typical (Zener-limiting) 120% typical, auto reset LED PS5R-A PS5R-B PS5R-C PS5R-D No No No No Between input and output terminals: 3,000V AC, 1 minute Between input terminals and housing: 2,000V AC, 1 minute Between output terminal and housing: 500V AC, 1 minute Between input and output terminals/input terminals and housing: 100M minimum (500V DC megger) PS5R-E Yes PS5R-G Yes -10 to +60C (14 to 140F) (see derating curves) -30 to +85C (-22 to 185F) 20 to 90% relative humidity (no condensation) 45m/s2, 10 to 55Hz, 2 hours on each of 3 axes Vibration Resistance Shock Resistance 75% at 12V 79% at 24V 10 to 50Hz, 0.75mm p-p, 2 hrs on each of 3 axes 294m/s2, 3 shocks in each of 6 directions 3.74" x 1.77" 2.76" x 1.77" 3.74" x 3.54" 3.74" x 3.54" x2.95" 5.71" x 3.54" x 2.95" x2.95" x2.95" x2.95" ( 95 x 45 x ( 70 x 45 x 75mm) 75mm) (95 x 90 x 75mm) (95 x 90 x 75mm) (95 x 145 x 75mm) 5.51" x7.87" x 4.72" (140 x 200 x 120mm) Spring-up, fingersafe terminals with captive M3.5 screws IP20 (finger safe) Cert. No. BL980213332392 Approvals UL 508 Listed File #E177168 Also Certified for EN61000-3-2 1. For dimensional drawings, see page L-8. 2. For usage instructions, see page L-6. 3. *12.5W for 5VDC model. L-4 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies PS5R Series Part Number Guide Part Numbering Guide PS5R - A 12 Wattage Output Voltage Part Number Codes Description Code 7.5W A 15W (12.5W for 5VDC models) B 30W C Wattage Output Voltage 50W D 100W E 240W G 5VDC 05 (A and B models only) 12V DC 12 (A, B, C models only) 24V DC 24 all models Part Number List Part Numbers: PS5R Series Output Capacity Output Voltage Input Voltage 5V DC 7.5W 12V DC 100 to 240VAC/ (110 to 340 VDC) 24V DC 12V DC PS5R-B05 100 to 240VAC/ (110 to 340 VDC) 24V DC 12V DC PS5R-A12 PS5R-A24 5V DC 15W* Part Number PS5R-A05 PS5R-B12 PS5R-B24 PS5R-C12 24V DC 100 to 240VAC/ (110 to 340 VDC) PS5R-C24 50W 24V DC 100 to 240VAC/ (110 to 340 VDC) PS5R-D24 100W 24V DC 100 to 120 VAC 200 to 240 VAC (240-370 VDC) PS5R-E24 240W 24V DC 100-240VAC (110-340VDC) PS5R-G24 30W L 1. For dimensional drawings, see page L-8. 2. For usage instructions, see page L-6. 3. For accessories, see page L-6. 4. *12.5W for 5VDC models. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-5 Power Supplies PS5R Series Accessories Part Numbers: PS5R Accessories Appearance Description Part Number DIN rail (1000mm) BNDN1000 DIN rail clip BNL5 Installation Instructions Time-Saving Spring-up Terminals The innovative terminals on the PS5R series use a special, spring-loaded screw. This makes installation as easy as pushing down and turning with a screwdriver. Installation time is cut in half since the screws do not need to be backed out to install wiring. The screws are held captive once installed and are 100% finger-safe. Screw terminals accept bare wire or ring or fork connectors. 1. Insert the wire connector into the slot on the side of the power supply. 2. Using a Phillips screwdriver, push down and turn the screw. Overcurrent Protection Characteristics PS5R-A/B PS5R-C/D/E Front Panel (terminals) Description Terminal Name V. ADJ Voltage adjustment Adjusts within 10%; turn clockwise to increase output voltage 100 120 Output Current (%) 50 0 100 120 Output Current (%) Parallel Operation +V (24V) PS5R DC ON Operation indicator Green LED is lit when output voltage is on DC output terminals +V: Positive output terminal -V: Negative output terminal PS5R +V, -V Frame ground Ground this terminal to reduce high-frequency currents caused by switching PS5R L, N Input terminals Accept a wide range of voltages and frequencies (no polarity at DC input) NC No connection Do not insert wires here, as this may damage the power supply PS5R ELECTRIC LOAD -V (0V) TERMINALS L 50 0 The wire is now connected, and the screw terminal is finger-safe! 100 Output Voltage (%) Output Voltage (%) 100 PS5R Parallel operation only recommended for PS5R-E24 and PS5R-G24. L-6 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies PS5R Series Temperature Derating Curves PS5R-A/B PS5R-C/D PS5R-C/D A Mounting B Mounting Up www.idec.com L Up USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-7 Power Supplies PS5R Series Dimensions PS5R-A 13 6 M3.5 Terminal Screws 13 7.2 3 70 56.6 DC ON 2 35.3 75 62.5 60 1 R2 .2 5 6o6 .5 6 5 V.ADJ 7.35 45 35 38.5 3.8 PS5R-B 13 13 7.2 M3.5 Terminal Screws 6 3 81.6 DC ON 2 95 35.3 75 62.5 60 1 7.35 R 2. 25 6o6 .5 6 5 V.ADJ 12 35 38.5 3.8 PS5R-C PS5R-D .5 o4 4- L .5 6 -o 10 13 13 10 V.ADJ DC ON 13 13 8 80 90 13 13 9 M3.5 Terminal Screws 13 12 13 7 6 7.2 7.35 5 60 75 (all dimensions in mm) L-8 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies PS5R Series Dimensions con't PS5R-E 6 3 1 13 2 13 145 135 13 4 13 5 13 200-240V 13 13 13 12 13 13 11 M3.5 Terminal Screws 12 7.2 7 13 8 13 9 10 4o4 .5 13 14 14 -o 6. 5 6 95 4 60 75 5 Applicable Crimping Terminal 4.1 max. 5.6 min. .5 o4 7.0 max. 60 35.3 135 o3.6 min. Mounting Hole Layout PS5R-G L (all dimensions in mm) www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-9 Power Supplies PS3E Series PS3E -- Metal Frame Switching Power Suppiles The PS3E series of industrial switching power supplies offers universal input from 100 to 240VAC (110 to 340VDC compatible). A broad range of outputs are available to supply 12 or 24VDC, with output capacities up to 150 watts. Key features of the PS3E series include: * Universal AC input (85 to 264 VAC) * DC compatible input (105 to 370VDC) * Remote ON/OFF functions are available with 100 and 150W models * Finger-safe terminals * Optional DIN rail brackets * Fused inputs * Auto resetting output overcurrent protection * Output voltage adjust (10%) * Conformity to FCC class A and VCCI 1 * Conformity to EN550011 Class A * Remote sensing capability on 100 and 150W models * CE marking according to Both EMC and LVD L Conforms to Both: EMC Directives: EN50081-2 and EN50082-2. LVD Directives: EN60529 and EN60950. Cert. No. B961113332372 File # LR88916 L-10 www.idec.com UL 1950 Recognized File #E141913 USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies Model 12VDC PS3E-A12F PS3E-B12F PS3E-C12F PS3E-D12F PS3E-E12F PS3E-F12F 24VDC PS3E-A24F PS3E-B24F PS3E-C24F PS3E-D24F PS3E-E24F PS3E-F24F 10W 15W 30W 50W 100W 150W Output Capacity Input Voltage (single-phase, 2-wire) Output Input Input Current (typical) Specifications PS3E Series Inrush Current 100 to 120VAC nominal (85 to 132VAC) 200 to 240VAC nominal (170 to 264VAC) 110 to 340VDC nominal (105 to 370VDC compatible) 100 to 240VAC nominal (85 to 264 VAC), 50/60Hz (47 to 63Hz) 110 to 340VDC nominal (105 to 370VDC compatible) 0.25A at 100VAC 0.37A at 100VAC 0.68A at 100VAC 1.15A at 100VAC 2.5A at 100VAC 3.7A at 100VAC 0.16A at 200VAC 0.23A at 200VAC 0.45A at 200VAC 0.75A at 200VAC 1.5A at 200VAC 2.1A at 200VAC 20A maximum (cold start at 100VAC) 10A maximum (cold start at 100VAC) 40A maximum (cold start at 200VAC) 40A maximum (cold start at 200VAC) Leakage Current (at no load) 0.75mA maximum (60Hz, measured in conformance with UL, CSA, VDE) Typical Efficiency 74% at 12VDC 78% at 24VDC 75% at 12VDC 78% at 24VDC 77% at 12VDC 79% at 24VDC 77% at 12VDC 79% at 24VDC 80% at 12VDC 82% at 24VDC 80% at 12VDC 82% at 24VDC Voltage and Current Ratings 12V, 0.9A 24V, 0.5A 12V, 1.4A 24V, 0.7A 12V, 2.5A 24V, 1.3A 12V, 4.4A 24V, 2.4A 12V, 8.4A 24V, 4.2A 12V, 12.5A 24V, 6.3A Voltage Adjustable 10% (using V.ADJ adjustment) Output Holding Time 20ms minimum (at rated input and output) Start Time 200ms maximum (at rated input and output) Rise Time 100ms maximum (at rated input and output) Fluctuation due to Input Voltage 12V: 48mV maximum 24V: 96mV maximum Fluctuation due to Load Change 12V: 100mV maximum 24V: 150mV maximum Fluctuation due to Ambient Temperature Change 12V: 120mV maximum 24V: 240mV maximum 1s maximum (at rated input and output) 12V: 150mV maximum 24V: 290mV maximum 180mV p-p maximum (-10 to 0C) 12V: 250mV p-p maximum (-10 to 0C) 24V: 300mV p-p maximum (-10 to 0C) 150mV p-p maximum (0 to 50C) 12V: 200mV p-p maximum (0 to 50C) 24V: 250mV p-p maximum (0 to 50C) Ripple Voltage Overcurrent Protection 105% minimum Overvoltage Protection 120% typical (Zener limiting) 120% typical (auto reset) Operation Indicator LED Dielectric Strength Between input and output terminals: 3,000VAC, 1 minute Between input terminals and housing: 2,000VAC, 1 minute Between output terminal and housing: 500VAC, 1 minute Insulation Resistance Between input and output terminals/input terminals and housing: 100M minimum (500VDC megger) Operating Temperature -10 to +60C (14 to 140F) (see derating curves) Storage Temperature -30 to +85C (-22 to 185F) Operating Humidity 20 to 90% relative humidity (no condensation) Vibration Resistance 20m/s2 (approximately 2G), 10 to 55Hz, 1 hour on each of 3 axes Shock Resistance 200m/s2 (approximately 20G), 11ms, 1 shock on each of 3 axes Dimensions (H x W x D) 3.8" x 1.38" x 3.39" (97 x 35 x 86mm) 3.8" x 1.38" x 3.39" (97 x 35 x 86mm) 3.8" x 1.38" x 4.5" (97 x 35 x 114.5mm) 3.8 " x 1.46" x 5.8" (97 x 37 x 147.5mm) 3.8" x 2.13" x 7.87" (97 x 54 x 200mm) 3.8" x 2.56" x 7.87" (97 x 65 x 200mm) Weight (approximate) 240g 250g 280g 360g 700g 800g www.idec.com L USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-11 Power Supplies PS3E Series Part Number Guide Part Numbering Guide PS3E - A 12 F Wattage Output Voltage Part Number Codes Description Wattage Output Voltage Code 7.5W A 15W B 30W C 50W D 100W E 150W F 12VDC 12 24VDC 24 Part Number List Part Numbers: PS3E Series Output Capacity Output Voltage Input Voltage 10W 15W 30W L 50W 100W 150W Part Number 12V DC PS3E-A12F 24V DC PS3E-A24F 12V DC PS3E-B12F 24V DC 12V DC 100 to 240VAC nominal (110 to 340VDC) PS3E-B24F PS3E-C12F 24V DC PS3E-C24F 12V DC PS3E-D12F 24V DC PS3E-D24F 12V DC PS3E-E12F 24V DC PS3E-E24F 12V DC 100 to 120VAC nominal 200 to 240VAC nominal 24V DC PS3E-F12F PS3E-F24F 1. For dimensional drawings, see page L-17 . 2. For usage instructions, see page L-16. 3. For accessories, see page L-13. L-12 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies PS3E Series Accessories Part Numbers: PS3E Accessories Description Appearance Use with Part Number DIN rail (1000mm) DIN rail brackets: PS9Z-3E4C, PS9Z-3E4D, PS9Z-3E4F BNDN1000 DIN rail clip DIN rail : BNDN1000 BNL5 PS3E-A, PS3E-B, PS3E-C PS9Z-3E4C PS3E-D, PS9Z-3E4D PS3E-E, PS3E-F PS9Z-3E4F PS3E-A, PS3E-B PS9Z-3E2B PS3E-C PS9Z-3E2C PS3E-D PS9Z-3E2D PS3E-E PS9Z-3E2E PS3E-F PS9Z-3E2F PS3E-A, PS3E-B PS9Z-3E3B PS3E-C PS9Z-3E3C DIN rail brackets Short "L" bracket Long "L" bracket PS3E-D PS9Z-3E3D PS3E-E PS9Z-3E3E PS3E-F PS9Z-3E3F L PS9Z-3E1B PS9Z-3E1C Mounting Brackets PS9Z-3E1D PS9Z-3E1E PS9Z-3E1F Mounting screws provided with DIN rail brackets. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-13 Power Supplies PS3E Series Characteristics and Terminal Designations L Terminal Name Remarks V.ADJ Output Voltage Adjustment LED Operational Indicator (Green) Illuminates when output voltage is on. +V, -V DC Output Terminals +V: Positive output terminal, -V: Negative output terminal Frame Ground Terminal Be sure to ground this terminal to reduce excess noise caused by switching. AC Input Terminal Accepts a wide range of coltages and frequencies. +S, -S Remote Sensing Terminals Compensates for voltage drops along the output line. Remove jumpers when using remote sensing. When remote sensing is not used, connect jumpers between terminals +S and +V and between terminals -S and V. Connect the load to terminals +V and -V. RC Remote Control Terminal Output is turned off while input voltage (5V) is applied to the terminals (H: only) L-14 Allows adjustment within 10%. Turning clockwise increases the output. www.idec.com , L: ) (Remote ON/OFF function type USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies PS3E Series Installation Instructions Instructions * Notes for Installation 1. PS3E switching power supplies can be installed in either (A) or (B) direction shown below. For PS3E-E/-F types, output current vs operating temperature. (A) (B) 2. Mount the switching power supply on a metallic surface that provides adequate heat dissipation. Be sure to prevent heat built-up around the power supplies. 3. Maintain 20mm clearance between the power supplies. 4. Use mounting screws of a proper length so that screws do not penetrate more than 6mm into the housing of switching power supply. 20mm or more ! * Adjustment of Output Voltage The output voltage can be adjusted within 10% of the rated output voltage by using the V. ADJ control on the front. Turning the V.ADJ clockwise increases the output voltage. When using a higher output voltage, reduce the output current to make sure that the output capacity is within the rating. Note that overvoltage protection may work when increasing the output voltage. * Overcurrent Protection The output voltage drops automatically when an overcurrent flows due to an overload or short circuit. Normal voltage is automatically restored when the load returns to normal conditions. * Overvoltage Protection PS3E-A PS3E-A uses a zener diode for overvoltage protection. If the output voltage is reduced by overvoltage (120% or more), replace the zener diode to restore the output voltage. PS3E-B/C/D/E/F The output is turned off by overvoltage protection when an overvoltage is generated . When an output voltage is reduced by overvoltage (130% or more), turn the input off and after one minute, turn the input on again. * Input Surge Current PS3E-A/B/C/D uses a power thermistor in inrush control circiut. Since the limit control varies with the temperature, surge current is increased at high temperatures. Note your selection of switches and fuses. * Series Operation The following series operation is allowed (a) + + IN _ OUT _ LOAD + + LOAD IN _ OUT _ For the series operation shown in figure (b), insert a Schottky diode. (b) + IN _ + IN _ + OUT _ + OUT _ D LOAD D * Notes for Operation 1. Welded fuses indicate that the internal circuits are damaged. If welded fuses are found in the internal circuits, contact IDEC for repair. 2. Avoid overload or short-circuit for a long period of time or you may damage the internal components. 3.Not sutiable for parallel operation. Notes for Safety For the use of switching power supplies, observe the following notes. * Do not use switching power supplies with electric equipment whose malfunction or inadvertent operation may damage the human body or life directlty. * Voltage and output current should not exceed the ratings. If voltage and output current exceed the ratings, electric shock, fire, or malfunction may occur. * Do not touch the switching power supplies when input voltage is applied, or electric shock may occur. www.idec.com * Ensure protection against malfunction or damage caused by the malfunction of switching power supplies into the final product. * Operating temperatures should not exceed the ratings. Be sure to note the derating characteristics. If the operating temeperature exceeds the ratings, electric shock, fire, or malfunction may occur. * Welded fuses indicate that the internal circuits are damaged. If the welded fuses are found in the internal circuits, contact IDEC for repair. * Do not use the switching power supplies for recharging batteries. USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-15 L Power Supplies PS3E Series Dimensions L PS3E-A PS3E-B PS3E-C PS3E-D PS3E-E PS3E-F L-16 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Power Supplies PS3E Series Dimensions con't PS9Z-3E4C 4.14" (105mm) 2.72" (69mm) 1.38"(35mm) 5.29" (134mm) L PS9Z-3E4D 3.82" (97mm) 2.72" (69mm) 1.38" (35mm) 7.32" (186mm) PS9Z-3E4F 4.17" (106mm) 3.12" (79mm) L 2.56"(65mm) 8.55" (217mm) 9.03" (229mm) www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC L-17 Power Supplies PS3E Series L L-18 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC