C3D03060F VRRM Silicon Carbide Schottky Diode = 600 V IF (TC=110C) = 3 A Z-RecTM Rectifier (Full-Pak) Qc Features Package * * * * * * * * TO-220-F2 600-Volt Schottky Rectifier Optimized for PFC Boost Diode Application Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF = 6.7 nC Benefits * * * * * Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 Applications * * CASE PIN 2 Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 150W-300W Part Number Package Marking C3D03060F TO-220-F2 C3D03060 Maximum Ratings (TC = 25 C unless otherwise specified) Symbol Parameter Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V Continuous Forward Current 5 3 2 A TC=25C TC=110C TC=135C IFRM Repetitive Peak Forward Surge Current 20 15 A TC=25C, tP=10 mS, Half Sine Wave D=0.3 TC=110C, tP=10 mS, Half Sine Wave D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 28 22 A TC=25C, tP=10 mS, Half Sine Wave D=0.3 TC=110C, tP=10 mS, Half Sine Wave D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 100 A TC=25C, tP=10 S, Pulse Ptot Power Dissipation 12.5 5.4 W TC=25C TC=110C -55 to +175 C 1 8.8 Nm lbf-in IF TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque 1 Value C3D03060F Rev. C M3 Screw 6-32 Screw Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions 1.7 2.4 V IF = 3 A TJ=25C IF = 3 A TJ=175C 50 100 A VR = 600 V TJ=25C VR = 600 V TJ=175C Note VF Forward Voltage IR Reverse Current 10 20 QC Total Capacitive Charge 6.7 nC VR = 600 V, IF = 3A di/dt = 500 A/S TJ = 25C C Total Capacitance 155 13 12 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RJC Parameter Typ. Unit TO-220-F2 Package Thermal Resistance from Junction to Case 12.0 C/W Typical Performance 1.40E-05 14 6.0 6.0 TJ = TJ = TJ = TJ = 25C 75C 125C 175C 12 1.20E-05 1.00E-05 10 4.0 4.0 TJ = 25C TJ = 75C 2.00E-062 TJ = 175C 8.00E-068 3.0 3.0 6.00E-066 2.0 2.0 4.00E-064 1.0 1.0 TJ = 125C 0.00E+000 0 0.0 0.0 0.0 0.5 0.5 1.0 1.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 VF Forward Voltage (V) Figure 1. Forward Characteristics 2 IR Reverse Current (A) IF Forward Current (A) 5.0 5.0 C3D03060F Rev. C 0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 VR Reverse Voltage (V) 600 Figure 2. Reverse Characteristics 700 800 Capacitance Typical Performance C3D03060F Current Derating 80 12 12 80 70 60 88 20% 30% 50% 70% DC 66 Duty* Duty* Duty* Duty* 44 C Capacitance (pF) Capacitance (pF) 60 F(PEAK) (A) Current Peak Forward I IF(PEAK) Peak Forward Current (A) 70 10 10 50 50 40 40 30 30 20 20 22 10 10 00 25 25 50 50 75 75 100 100 125 150 125 TC Case Temperature (C) Frequency > 1KHz TC Case *Temperature (C) 150 0 0 175 1 175 1 10 100 10 100 V Reverse Voltage (V) R Reverse Voltage Figure 3. Current Derating Zth (C/W) Figure 4. Capacitance vs. Reverse Voltage Time (s) Figure 5. Transient Thermal Impedance 3 C3D03060F Rev. C 1000 1000 Typical Performance 16.0 16 14 14.0 Power Dissipation (W) Power Dissipation (W) 12.0 12 10.0 10 8.08 6.06 4.04 2.02 0.00 25 25 50 50 75 100 125 150 75 100 125 150 Tc Case Temperature (C) TC Case Temperature (C) 175 175 Figure 6. Power Derating Package Dimensions Package TO-220-F2 E A F POS B G C H P L S D T M N PIN 1 PIN 2 4 C3D03060F Rev. C CASE Inches Millimeters Min Max Min A .177 .193 4.5 Max 4.9 B .092 .108 2.34 2.74 6.9 C .248 .272 6.3 D .098 .114 2.5 2.9 E .390 .406 9.9 10.3 F .118 .134 3.0 3.4 G .122 .137 3.1 3.5 H .617 .633 15.67 16.07 L .039 .055 1.0 1.4 M .016 .031 0.4 0.8 N .185 .217 4.7 5.5 P 0 .154 0 3.9 S .476 .508 12.1 12.9 T .016 .031 0.4 0.8 NOTE: 1. Dimension L, M, T apply for Solder Dip Finish Recommended Solder Pad Layout TO-220-2 Part Number Package Marking C3D03060F TO-220-F2 C3D03060 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering Diode Model Diode Model CSD04060 Vf T Vf =V If*R T= T+If*R T T +V T -3 VVT T= + (Tj J** -1.3*10 ) -3) = 0.965 1.01+(T -1.26*10 -3 -3 RRT T= + (Tj J**1.06*10 ) ) =0.096 0.14+(T 1.13*10 Note: Tj = Diode Junction Temperature In Degrees Celsius VT 5 C3D03060F Rev. C RT Notes * RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. * REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. * This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright (c) 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C3D03060F Rev. C Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: C3D03060F