SPECIFICATION CONTROL DRAWING Product Revision Product Name CWT-3-W122-5 A CWT-5-W122-5 A CWT-6-W122-5 A CWT-7-W122-5 A CWT-9-W122-5 A CWT-11-W122-5 A CWT-13-W122-5 A Product Dimensions oA oB L min min max 2.50 3.00 24.50 (0.098) (0.118) (0.965) 4.30 4.80 29.30 (0.169) (0.189) (1.154) 6.00 6.70 32.00 (0.236) (0.264) (1.260) 6.40 7.30 32.50 (0.252) (0.287) (1.280) 8.70 9.20 35.50 (0.343) (0.362) (1.398) 10.00 11.50 35.50 (0.394) (0.453) (1.398) 13.00 15.00 45.50 (0.512) (0.591) (1.791) oD max 3.00 (0.118) 4.80 (0.189) 6.70 (0.264) 7.30 (0.287) 9.20 (0.362) 11.50 (0.453) 15.10 (0.594) oE min 1.50 (0.059) 2.00 (0.079) 3.30 (0.130) 3.30 (0.130) 4.50 (0.177) 4.50 (0.177) 7.00 (0.276) Cable Dimensions oF oG min max 1.00 2.50 (0.040) (0.098) 1.50 4.30 (0.059) (0.169) 2.80 6.00 (0.110) (0.236) 2.80 6.40 (0.110) (0.252) 4.00 8.70 (0.157) (0.343) 4.00 10.00 (0.157) (0.394) 6.50 13.00 (0.256) (0.512) J 7.000.50 (0.2760.020) 9.000.50 (0.3540.020) 10.00 0.50 (0.3940.020) 11.001.00 (0.4330.040) 12.00 1.00 (0.4720.040) 13.001.00 (0.5120.040) 17.001.00 (0.6690.040) MATERIALS 1. INSULATION SLEEVE: Transparent heat-shrinkable radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. 3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. 4. GROUND LEAD: Raychem cross-linked polyethylene wire, AWG22, stranded tin plated copper. Color: green. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85C, meeting the dimensional criteria listed in the table above. 2. Temperature range: -55C to +125C. 3. When installed properly, these devices will meet the requirements of Tyco Electronics/Raychem Specification RT-1404. 4. For installation procedure and application equipment, consult Tyco Electronics/Raychem RPIP 824-00. For best results, prepare the cable as shown: Tyco Electronics Corporation 305 Constitutional Drive Menlo Park, CA 94025 USA RAYCHEM SOLDERSLEEVE TERMINATOR WITH PRE-INSTALLED LEAD DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: TITLE: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS IN application. MICRON CAGE CODE: REPLACES: DCR NUMBER: CWT-XX-W122-5 ANGLES: N/A M. FORONDA 06090 D980472 D030070 If this document is printed it becomes uncontrolled. Check for the latest revision. DOC. ISSUE: DATE: 1 PROD. REV.: SEE TABLE 8-May-03 SCALE: None SIZE: A SHEET: 1 of 1