ADVANCED ADVANCE D 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Product Overview The 885033 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter with extremely steep skirts, simultaneously exhibiting low loss in the WiFi band and high near-in rejection in the 2.6 GHz bands. 885033 is specifically designed to enable coexistence of WiFi and LTE signals within the same device or in close proximity to one another. CSP-5CT Package: 1.4 mm x 1.2 mm x 0.46 mm The 885033 uses common module packaging techniques to achieve the industry standard 1.4 mm x 1.2 mm x 0.46 mm footprint. The filter exhibits excellent power handling capabilities. Key Features Low loss in WLAN band with extended upper corner for inclusion of bluetooth High rejection in B38/B40 bands Industry leading small size: 1.4 mm x 1.2 mm x 0.46 mm Performance over -30 to +85 C Single ended operation Hermetically sealed RoHS compliant, Pb-free module package Functional Block Diagram Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TD-LTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters High-power WLAN Access Points Applicable reject bands: 2.6 GHz WiMAX/LTE, TDD-LTE Bands 38 & 40 Top View Pin Configuration Pin Number Label 1 Input 4 Output (to Antenna) Part Number Description 2,3,5 Ground* 885033 Packaged Part 885033-EVB Evaluation Board Ordering Information Standard T/R size = 15,000 units/reel. 885033 Product Datasheet rev L | Subject to change without notice 1 of 8 www.qorvo.com 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Absolute Maximum Ratings Parameter Rating Temperature1 -40 to +85 C Operable Temperature -30 to +85 C Absolute Max Input Power2 +31 dBm Storage Notes: 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Maximum CW signal applied for up to 100 msec with no damage. 885033 Product Datasheet rev L | Subject to change without notice 2 of 8 www.qorvo.com 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Electrical Specifications1 Conditions unless otherwise noted: Device Temperature = -30 C to +85 C. Parameter2 Insertion Condition Min. Typ. (+25 C) Max. 2402.5 - 2421.5 MHz (WiFi Ch.1) 1.7 2.2 2407.5 - 2426.5 MHz (WiFi Ch.2) 1.5 2.0 2412.5 - 2471.5 MHz (WiFi Ch.3 - 11) Loss3 1.5 1.9 1.6 2.1 2462.5 - 2481.5 MHz (WiFi Ch.13) 1.7 2.2 2402.5 - 2421.5 MHz (WiFi Ch.1) 0.8 1.5 2407.5 - 2426.5 MHz (WiFi Ch.2) 0.8 1.1 0.9 1.1 0.4 1.0 2412.5 - 2471.5 MHz (WiFi Ch.3 - 11) Passband Ripple - 2457.5 - 2476.5 MHz (WiFi Ch.12) - 2457.5 - 2476.5 MHz (WiFi Ch.12) 2462.5 - 2481.5 MHz (WiFi Ch.13) Impulse Response Length4 dB 0.6 1.8 1.9 2.2 2401 - 2483 MHz - 160 200 ns 100 - 2300 MHz 35 37 - dB 2300 - 2365 MHz (+25 to +85 C)5 50 53 2300 - 2365 MHz (-30 to +25 C)5 50 53 - dB 2365 - 2370 MHz (+25 to +85 C)5 54 58 2365 - 2370 MHz (-30 to +25C)5 54 58 - dB 2370 - 2375 MHz (+25 to +85 C)5 45 61 56 61 - dB 2375 - 2380 MHz (+25 to +85 C)5 25 49 C)5 34 49 - dB 2500 - 2505 MHz (+25 to +85 C)5 29 41 C)5 20 41 - dB 2505 - 2570 MHz (+25 to +85 C)5 49 55 C)5 38 55 - dB 2570 - 2620 MHz5 45 48 - dB 2620 - 2690 2370 - 2375 MHz (-30 to Rejection/Attenuation dB - 2402.5 - 2481.5 MHz (WiFi Ch.1 - 13) VSWR, In & Out Unit +25C)5 2375 - 2380 MHz (-30 to +25 2500 - 2505 MHz (-30 to +25 2505 - 2570 MHz (-30 to +25 - 44 46 - dB 4800 - 5000 MHz 45 49 - dB MHz5 7200 - 7500 MHz 36 40 - dB 2nd Harmonics CW Tone = 2442 MHz @ 22.5 dBm - 60 - dBc 3rd Harmonics CW Tone = 2442 MHz @ 22.5 dBm - 138 - RF Input Power6 2401 - 2481.5 MHz 27 dBc dBm Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 3. Data is the integrated value of the linears-parameter over the indicated band at the specified temperature. 4. Duration in ns between the maxima and the point 40 dB below the maxima. 5. Data is the integrated value of the linears-parameter over 5MHz range at the specified temperature. 6. Input power applied at 50% duty cycle for a minimum of 5,000 hrs at 55 C in the frequency band specified. 885033 Product Datasheet rev L | Subject to change without notice 3 of 8 www.qorvo.com 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Evaluation Board Notes: 1. Matching component values shown are for the specified TriQuint evaluation board. Value adjustment may be required in end user product circuits depending on component manufacturer and PCB material. Bill of Material Reference Des. Value Description Manuf. L1 8.2 nH Chip Inductor, 0201, +/- 5% Murata L2 6.8 nH Chip Inductor, 0201, +/- 5% Murata PCB N/A 3-layer Multiple 885033 Product Datasheet rev L | Subject to change without notice 4 of 8 Part Number 960999 www.qorvo.com 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Performance Plots Test conditions unless otherwise noted: Temp. = +25 C. 885033 Product Datasheet rev L | Subject to change without notice 5 of 8 www.qorvo.com 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Package Information, Marking and Dimensions Package Style: CSP-5CT Dimensions: 1.4 mm x 1.2 mm x 0.46 mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0 m, over a 2 - 6 m Ni plating The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code An asterisk (*) in front of the marking code indicates prototype. All dimensions shown are nominal in millimeters. All tolerances are 0.05 mm except overall length and width 0.10 mm PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. Tape and Reel information Standard T/R size = 15,000 units/reel. All dimensions are in millimeters. 885033 Product Datasheet rev L | Subject to change without notice 6 of 8 www.qorvo.com 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Handling Precautions PARAMETER RATING STANDARD ESD - Human Body Model (HBM) Class 1B ESDA/JEDEC JS-001 ESD - Machine Model (MM)) 350V JESD22-A115 MSL - Moisture Sensitivity Level Not applicable. Hermetic package IPC/JEDEC J-STD-020 885033 Product Datasheet rev L | Subject to change without notice 7 of 8 Caution! ESD sensitive device www.qorvo.com 885033 2.4 GHz WLAN/BT LTE Co-Existence Filter Solderability Compatible with both lead-free (260 C max. reflow temperature) and tin/lead (245 C max. reflow temperature) soldering processes. Package lead plating: Plated Au over Ni RoHS Compliance This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment), as amended by Directive 2015/863/EU. This product also has the following attributes: Lead free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free SVHC Free Pb Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2016 (c) Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. 885033 Product Datasheet rev L | Subject to change without notice 8 of 8 www.qorvo.com