Freescale Semiconductor Technical Data Document Number: MRF8S21100H Rev. 1, 3/2011 RF Power Field Effect Transistors MRF8S21100HR3 MRF8S21100HSR3 N--Channel Enhancement--Mode Lateral MOSFETs Designed for W--CDMA and LTE base station applications with frequencies from 2110 to 2170 MHz. Can be used in Class AB and Class C for all typical cellular base station modulation formats. * Typical Single--Carrier W--CDMA Performance: VDD = 28 Volts, IDQ = 700 mA, Pout = 24 Watts Avg., IQ Magnitude Clipping, Channel Bandwidth = 3.84 MHz, Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF. Frequency Gps (dB) D (%) Output PAR (dB) ACPR (dBc) 2110 MHz 17.9 33.0 6.4 --38.7 2140 MHz 18.1 33.0 6.4 --38.2 2170 MHz 18.3 33.4 6.3 --37.2 2110--2170 MHz, 24 W AVG., 28 V W--CDMA, LTE LATERAL N--CHANNEL RF POWER MOSFETs * Capable of Handling 10:1 VSWR, @ 32 Vdc, 2140 MHz, 138 Watts CW (1) Output Power (3 dB Input Overdrive from Rated Pout) * Typical Pout @ 1 dB Compression Point 100 Watts CW Features * 100% PAR Tested for Guaranteed Output Power Capability * Characterized with Series Equivalent Large--Signal Impedance Parameters and Common Source S--Parameters * Internally Matched for Ease of Use * Integrated ESD Protection * Greater Negative Gate--Source Voltage Range for Improved Class C Operation * Designed for Digital Predistortion Error Correction Systems * Optimized for Doherty Applications * RoHS Compliant * In Tape and Reel. R3 Suffix = 250 Units, 56 mm Tape Width, 13 inch Reel. For R5 Tape and Reel option, see p. 14. CASE 465--06, STYLE 1 NI--780 MRF8S21100HR3 CASE 465A--06, STYLE 1 NI--780S MRF8S21100HSR3 Table 1. Maximum Ratings Symbol Value Unit Drain--Source Voltage Rating VDSS --0.5, +65 Vdc Gate--Source Voltage VGS --6.0, +10 Vdc Operating Voltage VDD 32, +0 Vdc Storage Temperature Range Tstg --65 to +150 C Case Operating Temperature TC 150 C Operating Junction Temperature (2,3) TJ 225 C CW 108 0.57 W W/C Symbol Value (3,4) Unit CW Operation @ TC = 25C Derate above 25C Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 77C, 24 W CW, 28 Vdc, IDQ = 700 mA, 2140 MHz Case Temperature 80C, 100 W CW(1), 28 Vdc, IDQ = 700 mA, 2140 MHz RJC 0.48 0.45 C/W 1. Exceeds recommended operating conditions. See CW operation data in Maximum Ratings table. 2. Continuous use at maximum temperature will affect MTTF. 3. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 4. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes -- AN1955. (c) Freescale Semiconductor, Inc., 2010--2011. All rights reserved. RF Device Data Freescale Semiconductor MRF8S21100HR3 MRF8S21100HSR3 1 Table 3. ESD Protection Characteristics Test Methodology Class Human Body Model (per JESD22--A114) 2 (Minimum) Machine Model (per EIA/JESD22--A115) A (Minimum) Charge Device Model (per JESD22--C101) IV (Minimum) Table 4. Electrical Characteristics (TA = 25C unless otherwise noted) Symbol Min Typ Max Unit Zero Gate Voltage Drain Leakage Current (VDS = 65 Vdc, VGS = 0 Vdc) IDSS -- -- 10 Adc Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) IDSS -- -- 1 Adc Gate--Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) IGSS -- -- 1 Adc Gate Threshold Voltage (VDS = 10 Vdc, ID = 150 Adc) VGS(th) 1.2 2.0 2.7 Vdc Gate Quiescent Voltage (VDS = 28 Vdc, ID = 700 mAdc) VGS(Q) -- 2.7 -- Vdc Fixture Gate Quiescent Voltage (1) (VDD = 28 Vdc, ID = 700 mAdc, Measured in Functional Test) VGG(Q) 4.0 5.4 7.0 Vdc Drain--Source On--Voltage (VGS = 10 Vdc, ID = 1.5 Adc) VDS(on) 0.1 0.24 0.3 Vdc Characteristic Off Characteristics On Characteristics Functional Tests (2) (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 700 mA, Pout = 24 W Avg., f = 2170 MHz, Single--Carrier W--CDMA, IQ Magnitude Clipping, Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF. ACPR measured in 3.84 MHz Channel Bandwidth @ 5 MHz Offset. Power Gain Drain Efficiency Output Peak--to--Average Ratio @ 0.01% Probability on CCDF Adjacent Channel Power Ratio Input Return Loss Gps 17.2 18.3 20.2 dB D 31.0 33.4 -- % PAR 5.9 6.3 -- dB ACPR -- --37.2 --36.0 dBc IRL -- --12 --7 dB Typical Broadband Performance (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 700 mA, Pout = 24 W Avg., Single--Carrier W--CDMA, IQ Magnitude Clipping, Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF. ACPR measured in 3.84 MHz Channel Bandwidth @ 5 MHz Offset. Frequency Gps (dB) D (%) Output PAR (dB) ACPR (dBc) IRL (dB) 2110 MHz 17.9 33.0 6.4 --38.7 --18 2140 MHz 18.1 33.0 6.4 --38.2 --16 2170 MHz 18.3 33.4 6.3 --37.2 --12 1. VGG = 2 x VGS(Q). Parameter measured on Freescale Test Fixture, due to resistive divider network on the board. Refer to Test Circuit schematic. 2. Part internally matched both on input and output. (continued) MRF8S21100HR3 MRF8S21100HSR3 2 RF Device Data Freescale Semiconductor Table 4. Electrical Characteristics (TA = 25C unless otherwise noted) (continued) Characteristic Symbol Min Typ Max Unit Typical Performance (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 700 mA, 2110--2170 MHz Bandwidth Pout @ 1 dB Compression Point, CW P1dB -- 100 -- -- 40 -- W IMD Symmetry @ 36 W PEP, Pout where IMD Third Order Intermodulation 30 dBc (Delta IMD Third Order Intermodulation between Upper and Lower Sidebands > 2 dB) IMDsym VBW Resonance Point (IMD Third Order Intermodulation Inflection Point) VBWres -- 50 -- MHz Gain Flatness in 60 MHz Bandwidth @ Pout = 24 W Avg. GF -- 0.4 -- dB Gain Variation over Temperature (--30C to +80C) G -- 0.011 -- dB/C P1dB -- 0.005 -- dB/C Output Power Variation over Temperature (--30C to +80C) (1) MHz 1. Exceeds recommended operating conditions. See CW operation data in Maximum Ratings table. MRF8S21100HR3 MRF8S21100HSR3 RF Device Data Freescale Semiconductor 3 R2 R1 VGG VDD + C3 C5 C8 C6 C9 -C12 C1 C4 C2 CUT OUT AREA R3 C13 C7 C10 C11 MRF8S21100H Rev 0 Figure 1. MRF8S21100HR3(HSR3) Test Circuit Component Layout Table 5. MRF8S21100HR3(HSR3) Test Circuit Component Designations and Values Part Description Part Number Manufacturer C1, C3, C6, C7 6.8 pF Chip Capacitors ATC100B6R8CT500XT ATC C2 1.6 pF Chip Capacitor ATC100B1R6BT500XT ATC C4 0.2 pF Chip Capacitor ATC100B0R2BT500XT ATC C5, C8, C9, C10, C11 10 F, 50 V Tantalum Capacitors 293D106X9050E2TE3 Vishay C12 220 F, 50 V Electrolytic Capacitor, Radial 227CKS050M Illinois Capacitor C13 5.6 pF Chip Capacitor ATC100B5R6CT500XT ATC R1, R2 2 K, 1/4 W Chip Resistors CRCW12062K00FKEA Vishay R3 10 , 1/4 W Chip Resistor CRCW120610R0JNEA Vishay PCB 0.030, r = 2.55 AD255A Arlon MRF8S21100HR3 MRF8S21100HSR3 4 RF Device Data Freescale Semiconductor 33.5 33 D 18 Gps 32.5 Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF 17.5 17 PARC --34 --7.5 --35 --10 16.5 --36 16 --37 IRL ACPR 15.5 15 2060 2080 --38 2100 2120 2140 2160 2180 2200 ACPR (dBc) Gps, POWER GAIN (dB) 18.5 34 --39 2220 --12.5 --15 --17.5 --20 --1 --1.2 --1.4 --1.6 --1.8 PARC (dB) 34.5 VDD = 28 Vdc, Pout = 24 W (Avg.), IDQ = 700 mA 19.5 Single--Carrier W--CDMA, 3.84 MHz Channel Bandwidth 19 IRL, INPUT RETURN LOSS (dB) 20 D, DRAIN EFFICIENCY (%) TYPICAL CHARACTERISTICS --2 f, FREQUENCY (MHz) IMD, INTERMODULATION DISTORTION (dBc) Figure 2. Output Peak--to--Average Ratio Compression (PARC) Broadband Performance @ Pout = 24 Watts Avg. --10 VDD = 28 Vdc, Pout = 36 W (PEP), IDQ = 700 mA Two--Tone Measurements (f1 + f2)/2 = Center Frequency of 2140 MHz --20 IM3--L --30 IM3--U IM5--U --40 IM5--L IM7--L --50 IM7--U --60 1 10 100 TWO--TONE SPACING (MHz) 18.5 0 18 17.5 17 16.5 16 VDD = 28 Vdc, IDQ = 700 mA, f = 2140 MHz Single--Carrier W--CDMA, 3.84 MHz Channel Bandwidth ACPR --1 --1 dB = 22 W --5 PARC --3 dB = 40 W Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF 10 20 30 --25 30 --2 dB = 30 W --4 60 40 Gps --3 --20 50 D --2 70 40 50 --30 --35 ACPR (dBc) 1 D, DRAIN EFFICIENCY (%) 19 OUTPUT COMPRESSION AT 0.01% PROBABILITY ON CCDF (dB) Gps, POWER GAIN (dB) Figure 3. Intermodulation Distortion Products versus Two--Tone Spacing --40 20 --45 10 --50 60 Pout, OUTPUT POWER (WATTS) Figure 4. Output Peak--to--Average Ratio Compression (PARC) versus Output Power MRF8S21100HR3 MRF8S21100HSR3 RF Device Data Freescale Semiconductor 5 TYPICAL CHARACTERISTICS 16 2110 MHz 2140 MHz D ACPR 50 --10 30 14 20 2170 MHz 2140 MHz 10 2110 MHz 10 1 0 40 2170 MHz 12 60 10 100 0 200 --20 --30 --40 ACPR (dBc) VDD = 28 Vdc, IDQ = 700 mA, Single--Carrier W--CDMA, 3.84 MHz Channel Bandwidth 20 Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF Gps 18 D, DRAIN EFFICIENCY (%) Gps, POWER GAIN (dB) 22 --50 --60 Pout, OUTPUT POWER (WATTS) AVG. Figure 5. Single--Carrier W--CDMA Power Gain, Drain Efficiency and ACPR versus Output Power 10 24 Gain 20 5 GAIN (dB) --5 12 IRL --10 8 4 0 1800 IRL (dB) 0 16 VDD = 28 Vdc Pin = 0 dBm IDQ = 700 mA 1900 2000 --15 2100 2200 2300 2400 2500 --20 2600 f, FREQUENCY (MHz) Figure 6. Broadband Frequency Response MRF8S21100HR3 MRF8S21100HSR3 6 RF Device Data Freescale Semiconductor W--CDMA TEST SIGNAL 100 10 0 --10 Input Signal --30 0.1 0.01 W--CDMA. ACPR Measured in 3.84 MHz Channel Bandwidth @ 5 MHz Offset. Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF 0.001 0.0001 3.84 MHz Channel BW --20 1 (dB) PROBABILITY (%) 10 0 1 2 3 4 5 6 --40 --50 --60 +ACPR in 3.84 MHz Integrated BW --ACPR in 3.84 MHz Integrated BW --70 --80 7 8 9 PEAK--TO--AVERAGE (dB) Figure 7. CCDF W--CDMA IQ Magnitude Clipping, Single--Carrier Test Signal 10 --90 --100 --9 --7.2 --5.4 --3.6 --1.8 0 1.8 3.6 5.4 7.2 9 f, FREQUENCY (MHz) Figure 8. Single--Carrier W--CDMA Spectrum MRF8S21100HR3 MRF8S21100HSR3 RF Device Data Freescale Semiconductor 7 VDD = 28 Vdc, IDQ = 700 mA, Pout = 24 W Avg. f MHz Zsource Zload 2060 4.41 -- j6.05 3.03 -- j3.64 2080 4.38 -- j5.67 2.96 -- j3.45 2100 4.33 -- j5.29 2.89 -- j3.26 2120 4.33 -- j4.91 2.83 -- j3.10 2140 4.33 -- j4.54 2.75 -- j2.94 2160 4.33 -- j4.17 2.69 -- j2.75 2180 4.31 -- j3.80 2.62 -- j2.50 2200 4.32 -- j3.39 2.65 -- j2.24 2220 4.35 -- j2.99 2.67 -- j2.04 Zsource = Test circuit impedance as measured from gate to ground. Zload = Test circuit impedance as measured from drain to ground. Output Matching Network Device Under Test Input Matching Network Z source Z load Figure 9. Series Equivalent Source and Load Impedance MRF8S21100HR3 MRF8S21100HSR3 8 RF Device Data Freescale Semiconductor ALTERNATIVE PEAK TUNE LOAD PULL CHARACTERISTICS VDD = 28 Vdc, IDQ = 700 mA, Pulsed CW, 10 sec(on), 10% Duty Cycle 56 Ideal Pout, OUTPUT POWER (dBm) 55 2110 MHz 54 2140 MHz 53 2170 MHz 52 Actual 51 50 2110 MHz 49 2140 MHz 48 2170 MHz 47 46 45 27 28 29 30 31 33 32 34 35 36 37 38 Pin, INPUT POWER (dBm) NOTE: Load Pull Test Fixture Tuned for Peak P1dB Output Power @ 28 V P1dB P3dB f (MHz) Watts dBm Watts dBm 2110 141 51.5 166 52.2 2140 141 51.5 162 52.1 2170 138 51.4 158 52.0 Test Impedances per Compression Level f (MHz) Zsource Zload 2110 P1dB 3.50 -- j7.47 1.65 -- j3.64 2140 P1dB 4.21 -- j7.53 1.57 -- j3.70 2170 P1dB 6.39 -- j8.09 1.66 -- j3.68 Figure 10. Pulsed CW Output Power versus Input Power @ 28 V MRF8S21100HR3 MRF8S21100HSR3 RF Device Data Freescale Semiconductor 9 PACKAGE DIMENSIONS MRF8S21100HR3 MRF8S21100HSR3 10 RF Device Data Freescale Semiconductor MRF8S21100HR3 MRF8S21100HSR3 RF Device Data Freescale Semiconductor 11 MRF8S21100HR3 MRF8S21100HSR3 12 RF Device Data Freescale Semiconductor MRF8S21100HR3 MRF8S21100HSR3 RF Device Data Freescale Semiconductor 13 PRODUCT DOCUMENTATION AND SOFTWARE Refer to the following documents, tools and software to aid your design process. Application Notes * AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins * EB212: Using Data Sheet Impedances for RF LDMOS Devices Software * Electromigration MTTF Calculator * RF High Power Model * .s2p File For Software, do a Part Number search at http://www.freescale.com, and select the "Part Number" link. Go to the Software & Tools tab on the part's Product Summary page to download the respective tool. R5 TAPE AND REEL OPTION R5 Suffix = 50 Units, 56 mm Tape Width, 13 inch Reel. The R5 tape and reel option for MRF8S21100H and MRF8S21100HS parts will be available for 2 years after release of MRF8S21100H and MRF8S21100HS. Freescale Semiconductor, Inc. reserves the right to limit the quantities that will be delivered in the R5 tape and reel option. At the end of the 2 year period customers who have purchased these devices in the R5 tape and reel option will be offered MRF8S21100H and MRF8S21100HS in the R3 tape and reel option. REVISION HISTORY The following table summarizes revisions to this document. Revision Date Description 0 Oct. 2010 * Initial Release of Data Sheet 1 Mar. 2011 * Corrected VGG(Q) VDD value from 30 Vdc to 28 Vdc in On Characteristics table to reflect actual test measurement condition, p. 2 MRF8S21100HR3 MRF8S21100HSR3 14 RF Device Data Freescale Semiconductor How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 1--800--521--6274 or +1--480--768--2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1--8--1, Shimo--Meguro, Meguro--ku, Tokyo 153--0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center 1--800--441--2447 or +1--303--675--2140 Fax: +1--303--675--2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2010--2011. All rights reserved. MRF8S21100HR3 MRF8S21100HSR3 Document Number: RF Device Data MRF8S21100H Rev. 1, 3/2011Semiconductor Freescale 15