tel: (401) 943.2686 | fax: (401) 942.0920
DIMENSIONS
in Inches (Millimeters)
2362 Series SMD 2 Form C Reed Relay
e 2362 is the Surface Mount version of Coto Technology’s popular 2342
2 Form C Pico relay. e 2362 oers a proven reed design with longer life than
competing 2 Form C EMR products. e 2362 is the ideal solution for automated
test, instrumentation and telecommunication applications to increase system reli-
ability and life.
2362 Series Features
u
2 Form C Contacts
u
Hermetically Sealed Contacts
u
Long Life / High Reliability
u
Magnetically Shielding Steel Shell
u
Surface Mount Relay
u
RoHS compliant
2362 SMD 2 FORM C REED RELAY
Ordering Information
Part Number
2362-XX-000
Coil Voltage
05=5 volts
12=12 volts
06222015
RECOMMENDED LAND PATTERN DIMENSIONS
PER IPC STANDARDS
.700 (17.8)
.500 (12.7)
.080 (2.0)
.110 (2.8) .030 (0.8) Max.
.190 (4.8)
.100 (2.5)
.300 (7.6)
COTO TECHNOLOGY, INC.For most recent data visit www.cotorelay.com
Notes:
1 Consult factory for life expectancy at other switching loads.
Environmental Ratings:
Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C
Max Relay Temp During Solder Reow Process: 260°C for 1 minute maximum
All electrical parameters measured at 25°C unless otherwise specied.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
MODEL NUMBER 2362
Parameters Test Conditions Units 2 Form C
COIL SPECS.
Nom. Coil Voltage VDC 512
Coil Resistance +/- 10%, 25° C Ω175 1000
Operate Voltage Must Operate by VDC - Max. 3.8 9.0
Release Voltage Must Release by VDC - Min. 0.4 1.0
CONTACT RATINGS
Switching Voltage Max DC/Peak AC Resist. Volts 100
Switching Current Max DC/Peak AC Resist. Amps 0.25
Carry Current Max DC/Peak AC Resist. Amps 0.5
Contact Rating Max DC/Peak AC Resist. Watts 3
Life Expectancy-Typical1Signal Level 1.0V, 10mA x 106 Ops. 250
Static Contact
Resistance (max. init.) 50mV, 10mA Ω0.200
Dynamic Contact
Resistance (max. init.)
0.5V, 50mA
at 100 Hz, 1.5 msec Ω0.250
RELAY SPECIFICATIONS
Insulation Resistance
(minimum)
Between all Isolated Pins
at 100V, 25°C, 40% RH Ω109
Capacitance - Typical
Across Open Contacts
No Shield
Shield Guarding
pF
pF
2.0
N/A
Dielectric Strength
(minimum)
Between Contacts
Contacts to Shield
Contacts/Shield to Coil
VDC/peak AC VDC/peak
AC
VDC/peak AC
200
N/A
1000
Operate Time -
including bounce - Typical
At Nominal Coil Voltage,
30 Hz Square Wave msec. 1.5
Release Time - Typical msec. 2.0
Top View:
Dot stamped on top of relay refers to pin #1 location
Grid = .1”x.1” (2.54mm x 2.54mm)
1
2
3
45
6
7
8
06222015