DG2003/2004/2005 New Product Vishay Siliconix Low-Voltage Dual SPST Analog Switch FEATURES BENEFITS APPLICATIONS D D D D D D D D D D D D D D D D Low Voltage Operation (1.8 V to 5.5 V) Low On-Resistance - rDS(on): 1.2 W Fast Switching - 14 ns Low Charge Injection - QINJ: 1 pC Low Power Consumption TTL/CMOS Compatible MSOP-8 Package Reduced Power Consumption Simple Logic Interface High Accuracy Reduce Board Space Cellular Phones Communication Systems Portable Test Equipment Battery Operated Systems Sample and Hold Circuits DESCRIPTION The DG2003/2004/2005 are built on Vishay Siliconix's low voltage JI2 process. An epitaxial layer prevents latchup. The DG2003/2004/2005 are dual single-pole/single-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, fast switching, low on-resistance (rDS(on): 1.2 W) and small physical size (MSOP-8), the DG2003/2004/2005 are ideal for portable and battery powered applications requiring high performance and efficient use of board space. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2003 DG2004 DG2005 NO1 1 8 V+ NC1 1 8 V+ NO1 1 8 V+ COM1 2 7 IN1 COM1 2 7 IN1 COM1 2 7 IN1 IN2 3 6 COM2 IN2 3 6 COM2 IN2 3 6 COM2 GND 4 5 NO2 GND 4 5 NC2 GND 4 5 NC2 Top View Top View TRUTH TABLE - DG2003 Top View TRUTH TABLE - DG2004 TRUTH TABLE - DG2005 Logic NO Logic NC Logic NO1 NC2 0 Off 0 On 0 Off On 1 On 1 Off 1 On Off ORDERING INFORMATION Temp Range Package -40 to 85C MSOP-8 Part Number DG2003DQ DG2004DQ DG2005DQ Document Number: 71754 S-05298--Rev. B, 17-Dec-01 www.vishay.com 1 DG2003/2004/2005 New Product Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Reference to GND V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +6 V IN, COM, NC, NOa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to (V+ + 0.3 V) Continuous Current (Any terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . . "50 mA Peak Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "200 mA (Pulsed at 1 ms, 10% duty cycle) Storage Temperature (D Suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to 150C Power Dissipation (Packages)b MSOP-8c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6.5 mW/_C above 25_C SPECIFICATIONS (V+ = 2.0 V) Test Conditions Otherwise Unless Specified Parameter Symbol V+ = 2.0 V, "10%, VIN = 0.4 or 1.6 Ve Limits -40 to 85_C Tempa Minb Full 0 Typc Maxb Unit V+ V Analog Switch Analog Signal Ranged On-Resistance rON Flatnessd Switch Off Leakage Currentf VNO, VNC, VCOM rON V+ = 2.0 V, VCOM = 1.0 V, INO, INC = 1 mA Room Fulld 7.0 12.5 rON Flatness V+ = 2.0 V, VCOM = 0 to V+, INO, INC = 1 mA Room 5 INO(off), INC(off) ICOM(off) Channel-On Leakage Current f ICOM(on) 10.0 16.0 W V+ = 2.2 V VNO, VNC = 0.5 V/1.5 V, VCOM = 1.5 V/0.5 V V+ = 2.2 V, VNO, VNC = VCOM = 0.5 V/1.5 V Room Fulld -500 -4.0 500 4.0 pA nA Room Fulld -500 -4.0 500 4.0 pA nA Room Fulld -500 -4.0 500 4.0 pA nA 1.6 Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Input Capacitanced Input Current Full Cin IINL or IINH 0.4 VIN = 0 or V+ Full 5 -1 V pF 1 mA Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Charge Injectiond QINJ Off-Isolationd OIRR Crosstalkd XTALK NO, NC Off Capacitanced Channel-On Capacitanced CNO(off), CNC(off) VNO or VNC = 1.5 V, RL = 300 W, CL = 35 pF Figures 1 and 2 CL = 1 nF, VGEN = 0 V, RGEN = 0 W, Figure 3 RL = 50 W W, CL = 5 pF, f = 1 MHz Room Fulld 30 47 48 Room Fulld 22 37 48 Room 2 Room -61 Room -67 Room 53 Room 110 pC dB VIN = 0 or V+, f = 1 MHz CON ns pF Power Supply Power Supply Range V+ Power Supply Currentd I+ Power Consumption PC www.vishay.com 2 1.8 0.02 VIN = 0 or V+ 2.2 V 1.0 mA 2.2 mW Document Number: 71754 S-05298--Rev. B, 17-Dec-01 DG2003/2004/2005 New Product Vishay Siliconix SPECIFICATIONS (V+ = 3.0 V) Test Conditions Otherwise Unless Specified Parameter Symbol V+ = 3 V, "10%, VIN = 0.4 or 2.0 Ve Limits -40 to 85_C Tempa Minb Full 0 Typc Maxb Unit V+ V Analog Switch Analog Signal Ranged On-Resistance rON Flatnessd Switch Off Leakage Current f VNO, VNC, VCOM rON V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA Room Full 2.2 2.4 rON Flatness V+ = 2.7 V, VCOM = 0 to V+, INO, INC = 10 mA Room 0.5 INO(off), INC(off) ICOM(off) Channel-On Leakage Current f ICOM(on) 3.5 3.7 W V+ = 3.3 V VNO, VNC = 1 V/3 V, VCOM = 3 V/1 V V+ = 3.3 V, VNO, VNC = VCOM = 1 V/3 V Room Full -500 -6.0 500 6.0 pA nA Room Full -500 -6.0 500 6.0 pA nA Room Full -500 -6.0 500 6.0 pA nA 2 Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Cin Full Input Capacitanced Input Current IINL or IINH VIN = 0 or V+ Full 0.4 5 -1 V pF 1 mA Dynamic Characteristics Turn-On Timed tON Turn-Off Timed tOFF Charge Injectiond QINJ Off-Isolationd OIRR Crosstalkd XTALK NO, NC Off Capacitanced Channel-On Capacitanced CNO(off), CNC(off) VNO or VNC = 2.0 V, RL = 300 W, CL = 35 pF Figure 1 and 2 CL = 1 nF, VGEN = 0 V, RGEN = 0 W, Figure 3 RL = 50 W W, CL = 5 pF, f = 1 MHz Room Full 19 35 36 Room Full 17 31 34 Room 1 Room -61 Room -67 Room 53 Room 110 pC dB VIN = 0 or V+, f = 1 MHz CON ns pF Power Supply Power Supply Range V+ Power Supply Current I+ Power Consumption PC Document Number: 71754 S-05298--Rev. B, 17-Dec-01 2.7 0.02 VIN = 0 or V+ 3.3 V 1.0 mA 3.3 mW www.vishay.com 3 DG2003/2004/2005 New Product Vishay Siliconix SPECIFICATIONS (V+ = 5.0 V) Test Conditions Otherwise Unless Specified Parameter Symbol V+ = 5 V, "10%, VIN = 0.8 or 2.4 Ve Limits -40 to 85_C Tempa Minb Full 0 Typc Maxb Unit V+ V Analog Switch Analog Signal Ranged On-Resistance rON Flatnessd VNO, VNC, VCOM rON V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA Room Full 1.2 1.6 rON Flatness V+ = 4.5 V, VCOM = 0 to V+, INO, INC = 10 mA Room 0.2 INO(off), INC(off) Switch Off Leakage Current ICOM(off) Channel-On Leakage Current ICOM(on) 2.5 2.7 W V+ = 5.5 V VNO, VNC = 1 V/4.5 V, VCOM = 4.5 V/1 V V+ = 5.5 V, V+ = 5.5 V VNO, VNC = VCOM = 1 V/4.5 V Room Full -1.0 -8.0 1.0 8.0 Room Full -1.0 -8.0 1.0 8.0 Room Full -1.0 -8.0 1.0 8.0 2.4 nA Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Input Capacitance Cin Full Input Current IINL or IINH VIN = 0 or V+ Full 0.8 5 -1 V pF 1 mA Dynamic Characteristics Turn-On Timed tON Turn-Off Timed tOFF Charge Injectiond QINJ Off-Isolationd OIRR Crosstalkd XTALK Source-Off Capacitanced Channel-On Capacitanced CNO(off), CNC(off) VNO or VNC = 3 V, RL = 300 W, CL = 35 pF Figure 1 and 2 CL = 1 nF, VGEN = 0 V, RGEN = 0 W, Figure 3 RL = 50 W W, CL = 5 pF, f = 1 MHz Room Full 13 28 31 Room Full 19 22 31 Room 1 Room -61 Room -67 Room 51 Room 110 pC dB VIN = 0 or V+, f = 1 MHz CON ns pF Power Supply Power Supply Range V+ Power Supply Current I+ Power Consumption PC 4.5 0.02 VIN = 0 or V+ 5.5 V 1.0 mA 5.5 mW Notes: a. b. c. d. e. f. Room = 25C, Full = as determined by the operating suffix. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. Typical values are for design aid only, not guaranteed nor subject to production testing. Guarantee by design, nor subjected to production test. VIN = input voltage to perform proper function. Guaranteed by 5-V leakage testing, not production tested. www.vishay.com 4 Document Number: 71754 S-05298--Rev. B, 17-Dec-01 DG2003/2004/2005 New Product Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) rON vs. VCOM Supply Voltage rON vs. Analog Voltage and Temperature 8 4.0 3.5 V+ = 2 V/IS = 1 mA r ON - On-Resistance ( W ) r ON - On-Resistance ( W ) 7 6 5 4 3 V+ = 3 V/IS = 100 mA 2 1 3.0 2.5 V+ = 3 V -40_C 2.0 0_C 25_C 1.5 1.0 85_C 0.5 V+ = 5 V/IS = 100 mA 0 0.0 0 1 2 3 4 5 0 1 2 VCOM - Analog Voltage (V) 4 5 VCOM - Analog Voltage (V) Supply Current vs. Temperature Supply Current vs. Input Switching Frequency 10 m 10 V+ = 5 V VIN = 0 V 1m I+ - Supply Current (A) I+ - Supply Current (nA) 3 1 0.1 100 m 10 m 1m 100 n 10 n 0.01 -60 1n -40 -20 0 20 40 60 80 10 100 Leakage Current vs. Temperature 10 K 100 K 1M 10 M Leakage vs. Analog Voltage V+ = 5 V V+ = 5 V T = 25_C 150 1000 100 Leakage Current (pA) Leakage Current (pA) 1K 200 10000 ICOM(on) 100 INO(off)/INC(off) 10 50 ICOM(on) 0 ICOM(off) -50 INO(off)/INC(off) -100 -150 ICOM(off) 1 -60 100 Input Switching Frequency (Hz) Temperature (_C) -200 -40 -20 0 20 40 Temperature (_C) Document Number: 71754 S-05298--Rev. B, 17-Dec-01 60 80 100 0 1 2 3 4 5 VCOM, VNO, VNC - Analog Voltage www.vishay.com 5 DG2003/2004/2005 New Product Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Switching Time vs. Temperature and Supply Voltage Insertion Loss, Off-Isolation, Crosstalk vs. Frequency 35 10 LOSS 0 30 25 Loss, OIRR, XTALK (dB) t OFF - Switching Time (ns) tON V+ = 2 V tOFF V+ = 2 V 20 tON V+ = 3 V 15 tON V+ = 5 V tOFF V+ = 3 V tOFF V+ = 5 V t ON, 10 -10 -20 -30 -40 -50 OIRR -60 V+ = 3 V RL = 50 W -70 XTALK 5 -80 0 -60 -40 -20 0 20 40 60 80 -90 100 K 100 1M Switching Threshold vs. Supply Voltage 1G 20 1.8 V+ = 5 V 15 1.6 Q - Charge Injection (pC) V T - Switching Threshold (V) 100 M Charge Injection vs. Analog Voltage 2.0 1.4 1.2 1.0 0.8 0.6 V+ = 3 V 10 V+ = 2 V 5 0 -5 -10 0.4 -15 0.2 0.0 -20 0 1 2 3 4 V+ - Supply Voltage (V) www.vishay.com 6 10 M Frequency (Hz) Temperature (_C) 5 6 0 1 2 3 4 5 6 VCOM - Analog Voltage (v) Document Number: 71754 S-05298--Rev. B, 17-Dec-01 DG2003/2004/2005 New Product Vishay Siliconix TEST CIRCUITS V+ VINH Logic Input 50% VINL V+ Switch Output COM NO or NC Switch Input tr t 5 ns tf t 5 ns VOUT 0.9 x VOUT Switch Output IN Logic Input RL 300 W GND CL 35 pF 0V tOFF tON Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) V OUT + V COM RL R L ) R ON FIGURE 1. Switching Time V+ DVOUT V+ Rgen COM VOUT NC or NO VOUT + IN Vgen IN CL = 1 nF On Off On GND Q = DVOUT x CL VIN = 0 - V+ IN depends on switch configuration: input polarity determined by sense of switch. FIGURE 2. Charge Injection V+ V+ 10 nF 10 nF V+ V+ NC or NO COM IN 0V, 2.4 V Meter IN 0 V, 2.4 V COM NC or NO RL GND GND HP4192A Impedance Analyzer or Equivalent f = 1 MHz V COM Analyzer Off Isolation + 20 log V NONC FIGURE 3. Off-Isolation Document Number: 71754 S-05298--Rev. B, 17-Dec-01 FIGURE 4. Channel Off/On Capacitance www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1