SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 Y4 Y6 COM Y7 Y5 INH GND GND 15 3 14 4 13 5 12 6 11 7 10 8 9 Y6 COM Y7 Y5 INH GND VCC Y2 Y1 Y0 Y3 A B C 1 16 2 15 3 14 Y2 Y1 13 Y0 12 Y3 11 A 10 B 4 5 6 7 8 GND The 'LV4051A devices handle both analog and digital signals. Each channel permits signals with amplitudes up to 5.5 V (peak) to be transmitted in either direction. 16 2 SN74LV4051A . . . RGY PACKAGE (TOP VIEW) description/ordering information These 8-channel CMOS analog multiplexers/ demultiplexers are designed for 2-V to 5.5-V VCC operation. 1 VCC D All Ports High On-Off Output-Voltage Ratio Low Crosstalk Between Switches Individual Switch Controls Extremely Low Input Current Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-toanalog conversion systems. 9 C D D D D D SN54LV4051A . . . J OR W PACKAGE SN74LV4051A . . . D, DB, DGV, N, NS, OR PW PACKAGE (TOP VIEW) Y4 D 2-V to 5.5-V VCC Operation D Support Mixed-Mode Voltage Operation on ORDERING INFORMATION PACKAGE TA Tube of 25 SN74LV4051AN SN74LV4051AN QFN - RGY Reel of 1000 SN74LV4051ARGYR LW051A Tube of 40 SN74LV4051AD Reel of 2500 SN74LV4051ADR SOP - NS Reel of 2000 SN74LV4051ANSR 74LV4051A SSOP - DB Reel of 2000 SN74LV4051ADBR LW051A Tube of 90 SN74LV4051APW Reel of 2000 SN74LV4051APWR Reel of 250 SN74LV4051APWT TVSOP - DGV Reel of 2000 SN74LV4051ADGVR LW051A CDIP - J Tube of 25 SNJ54LV4051AJ SNJ54LV4051AJ CFP - W Tube of 150 SNJ54LV4051AW SNJ54LV4051AW TSSOP - PW -55C 55C to 125C TOP-SIDE MARKING PDIP - N SOIC - D -40C 40C to 85C ORDERABLE PART NUMBER LV4051A LW051A Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright (c) 2005, Texas Instruments Incorporated UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 FUNCTION TABLE INPUTS B A ON CHANNEL INH C L L L L Y0 L L L H Y1 L L H L Y2 L L H H Y3 L H L L Y4 L H L H Y5 L H H L Y6 L H H H Y7 H X X X None logic diagram (positive logic) 3 13 A 14 11 15 B 12 10 1 C 5 9 2 INH 2 4 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 COM Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7.0 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7.0 V Switch I/O voltage range, VIO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 mA I/O diode current, IIOK (VIO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -50 mA Switch through current, IT (VIO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Package thermal impedance, JA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73C/W (see Note 3): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82C/W (see Note 3): DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120C/W (see Note 3): N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67C/W (see Note 3): NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64C/W (see Note 3): PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108C/W (see Note 4): RGY package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51-7. 4. The package thermal impedance is calculated in accordance with JESD 51-5. recommended operating conditions (see Note 5) SN54LV4051A VCC Supply voltage VCC = 2 V VIH High-level High level input voltage, control inputs MIN MAX MIN MAX 2 5.5 2 5.5 1.5 1.5 VCC = 2.3 V to 2.7 V VCC 0.7 VCC 0.7 VCC = 3 V to 3.6 V VCC 0.7 VCC 0.7 VCC = 4.5 V to 5.5 V VCC 0.7 VCC 0.7 VCC = 2 V VIL Low-level Low level input voltage, control inputs VI Control input voltage VIO Input/output voltage 0.5 Input transition rise or fall rate VCC 0.3 VCC = 3 V to 3.6 V VCC 0.3 VCC 0.3 VCC 0.3 V VCC 0.3 0 5.5 0 5.5 V 0 VCC 0 VCC V VCC = 2.3 V to 2.7 V 200 200 VCC = 3 V to 3.6 V 100 100 20 20 Operating free-air temperature V 0.5 VCC 0.3 VCC = 4.5 V to 5.5 V TA UNIT V VCC = 2.3 V to 2.7 V VCC = 4.5 V to 5.5 V t/v SN74LV4051A -55 125 -40 85 ns/V C With supply voltages at or near 2 V, the analog switch on-state resistance becomes very nonlinear. It is recommended that only digital signals be transmitted at these low supply voltages. NOTE 5: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to TI application report Implications of Slow or Floating CMOS Inputs, literature number SCBA004. PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS PARAMETER VCC TA = 25C MIN SN54LV4051A TYP MAX MIN MAX SN74LV4051A MIN MAX UNIT IT = 2 mA,, VI = VCC or GND, VINH = VIL (see Figure 1) 2.3 V 38 180 225 225 3V 30 150 190 190 4.5 V 22 75 100 100 IT = 2 mA, VI = VCC to GND, VINH = VIL 2.3 V 113 500 600 600 3V 54 180 225 225 4.5 V 31 100 125 125 Difference in on-state on state resistance between switches IT = 2 mA, VI = VCC to GND, VINH = VIL 2.3 V 2.1 30 40 40 3V 1.4 20 30 30 4.5 V 1.3 15 20 20 Control input current VI = 5.5 V or GND 0 to 5.5 V 0.1 1 1 A IS(off) Off-state switch leakage current VI = VCC and VO = GND, or VI = GND and VO = VCC, VINH = VIH (see Figure 2) 5.5 V 0.1 1 1 A IS(on) On-state switch leakage current VI = VCC or GND, VINH = VIL (see Figure 3) 5.5 V 0.1 1 1 A ICC Supply current VI = VCC or GND 5.5 V 20 20 A CIC Control input capacitance f = 10 MHz 3.3 V 2 pF CIS Common terminal capacitance 3.3 V 23.4 pF COS Switch terminal capacitance 3.3 V 5.7 pF CF Feedthrough capacitance 3.3 V 0.5 pF On-state switch resistance ron ron(p) ron II Peak on-state on state resistance switching characteristics over recommended operating free-air temperature range, VCC = 2.5 V 0.2 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS COM or Yn Yn or COM TA = 25C MIN SN54LV4051A MAX MIN MAX UNIT MAX CL = 15 pF, (see Figure 4) 1.9 10 16 16 ns tPLH tPHL Propagation delay time tPZH tPZL Enable delay time INH COM or Yn CL = 15 pF, (see Figure 5) 6.6 18 23 23 ns tPHZ tPLZ Disable delay time INH COM or Yn CL = 15 pF, (see Figure 5) 7.4 18 23 23 ns tPLH tPHL Propagation delay time COM or Yn Yn or COM CL = 50 pF, (see Figure 5) 3.8 12 18 18 ns tPZH tPZL Enable delay time INH COM or Yn CL = 50 pF, (see Figure 5) 7.8 28 35 35 ns tPHZ tPLZ Disable delay time INH COM or Yn CL = 50 pF, (see Figure 5) 11.5 28 35 35 ns PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. 4 MIN SN74LV4051A TYP POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V 0.3 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS COM or Yn Yn or COM TA = 25C MIN SN54LV4051A MIN MAX SN74LV4051A MIN MAX UNIT TYP MAX CL = 15 pF, (see Figure 4) 1.2 6 10 10 ns tPLH tPHL Propagation delay time tPZH tPZL Enable delay time INH COM or Yn CL = 15 pF, (see Figure 5) 4.7 12 15 15 ns tPHZ tPLZ Disable delay time INH COM or Yn CL = 15 pF, (see Figure 5) 5.7 12 15 15 ns tPLH tPHL Propagation delay time COM or Yn Yn or COM CL = 50 pF, (see Figure 4) 2.5 9 12 12 ns tPZH tPZL Enable delay time INH COM or Yn CL = 50 pF, (see Figure 5) 5.5 20 25 25 ns tPHZ tPLZ Disable delay time INH COM or Yn CL = 50 pF, (see Figure 5) 8.8 20 25 25 ns switching characteristics over recommended operating free-air temperature range, VCC = 5 V 0.5 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS COM or Yn Yn or COM TA = 25C MIN SN54LV4051A MIN MAX SN74LV4051A MIN MAX UNIT TYP MAX CL = 15 pF, (see Figure 4) 0.6 4 7 7 ns tPLH tPHL Propagation delay time tPZH tPZL Enable delay time INH COM or Yn CL = 15 pF, (see Figure 5) 3.5 8 10 10 ns tPHZ tPLZ Disable delay time INH COM or Yn CL = 15 pF, (see Figure 5) 4.4 8 10 10 ns tPLH tPHL Propagation delay time COM or Yn Yn or COM CL = 50 pF, (see Figure 4) 1.5 6 8 8 ns tPZH tPZL Enable delay time INH COM or Yn CL = 50 pF, (see Figure 5) 4 14 18 18 ns tPHZ tPLZ Disable delay time INH COM or Yn CL = 50 pF, (see Figure 5) 6.2 14 18 18 ns PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 analog switch characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER Frequency response (switch on) Crosstalk (control input to signal output) Feedthrough attenuation (switch off) Sine-wave distortion TA = 25C FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCC 20 Yn or COM CL = 50 pF, p , RL = 600 , fin i = 1 MHz (sine wave) (see Note 6 and Figure 6) 2.3 V COM or Yn 3V 25 4.5 V 35 CL = 50 pF, p , RL = 600 , fin = 1 MHz (square wave) (see Figure 7) 2.3 V 20 3V 35 4.5 V 60 CL = 50 pF, p , RL = 600 , fin = 1 MHz (see Note 7 and Figure 8) 2.3 V -45 3V -45 4.5 V -45 CL = 50 pF, RL = 10 k, k fin = 1 kHz ( i wave)) (sine (see Figure 9) 2.3 V 0.1 3V 0.1 4.5 V 0.1 INH COM or Yn COM or Yn Yn or COM COM or Yn Yn or COM VI = 2 Vp-p VI = 2.5 Vp-p VI = 4 Vp-p MIN TYP MAX UNIT MHz mV dB % NOTES: 6. Adjust fin voltage to obtain 0-dBm output. Increase fin frequency until dB meter reads -3 dB. 7. Adjust fin voltage to obtain 0-dBm input. operating characteristics, VCC = 3.3 V, TA = 25C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance CL = 50 pF, f = 10 MHz PARAMETER MEASUREMENT INFORMATION VCC VINH = VIL VCC VI = VCC or GND VO (ON) GND r on + 2 mA V VI - VO Figure 1. On-State Resistance Test Circuit 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VI - VO 2 10 -3 W TYP UNIT 5.9 pF SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 PARAMETER MEASUREMENT INFORMATION VCC VINH = VIH VCC A VI (OFF) VO GND Condition 1: VI = 0, VO = VCC Condition 2: VI = VCC, VO = 0 Figure 2. Off-State Switch Leakage-Current Test Circuit VCC VINH = VIL VCC VI A (ON) Open GND VI = VCC or GND Figure 3. On-State Switch Leakage-Current Test Circuit VCC VINH = VIL VCC (ON) Input 50 Output CL GND Figure 4. Propagation Delay Time, Signal Input to Signal Output POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 PARAMETER MEASUREMENT INFORMATION VCC 50 VINH VCC VI S1 VO TEST S1 S2 tPLZ/tPZL tPHZ/tPZH GND VCC VCC GND 1 k S2 CL GND TEST CIRCUIT VCC VCC VINH 50% 50% 0V 0V tPZH tPZL VCC VOH VO 50% 50% VOL 0 V (tPZL, tPZH) VCC VCC VINH 50% 50% 0V 0V tPHZ tPLZ VCC VOH VO VOL + 0.3 V VOL VOH - 0.3 V 0 V (tPLZ, tPHZ) VOLTAGE WAVEFORMS Figure 5. Switching Time (tPZL, tPLZ, tPZH, tPHZ), Control to Signal Output VCC VINH = GND 0.1 F fin VI VCC VO (ON) GND 50 RL CL VCC/2 NOTE A: fin is a sine wave. Figure 6. Frequency Response (Switch On) 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN54LV4051A, SN74LV4051A 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SCLS428H - MAY 1999 - REVISED APRIL 2005 PARAMETER MEASUREMENT INFORMATION VCC 50 VINH VCC VO GND 600 RL VCC/2 CL VCC/2 Figure 7. Crosstalk (Control Input, Switch Output) VCC VINH = VCC 0.1 F VI fin 50 VCC VO (OFF) GND 600 RL CL VCC/2 VCC/2 Figure 8. Feedthrough Attenuation (Switch Off) VCC VINH = GND 10 F fin 600 10 F VCC VO (ON) GND RL CL VCC/2 Figure 9. Sine-Wave Distortion POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 17-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) SN74LV4051AD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADBR ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADGVR ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADGVRE4 ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADGVRG4 ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ADRE4 ACTIVE SOIC D 16 TBD Call TI Call TI SN74LV4051ADRG4 ACTIVE SOIC D 16 TBD Call TI Call TI SN74LV4051AN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type SN74LV4051ANE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) SN74LV4051ANSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ANSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ANSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 17-Aug-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) SN74LV4051APWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APWRG3 PREVIEW TSSOP PW 16 2000 TBD SN74LV4051APWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APWT ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APWTE4 ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051APWTG4 ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV4051ARGYR ACTIVE VQFN RGY 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN74LV4051ARGYRG4 ACTIVE VQFN RGY 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Call TI Samples (Requires Login) Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com (3) 17-Aug-2012 MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN74LV4051A : * Automotive: SN74LV4051A-Q1 * Enhanced Product: SN74LV4051A-EP NOTE: Qualified Version Definitions: * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects * Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74LV4051ADBR SSOP DB 16 2000 330.0 16.4 8.2 SN74LV4051ADGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74LV4051ANSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 SN74LV4051APWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LV4051APWR TSSOP PW 16 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 SN74LV4051APWRG4 TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LV4051APWT TSSOP PW 16 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LV4051ARGYR VQFN RGY 16 3000 330.0 12.4 3.8 4.3 1.5 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LV4051ADBR SSOP DB 16 2000 367.0 367.0 38.0 SN74LV4051ADGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74LV4051ANSR SO NS 16 2000 367.0 367.0 38.0 SN74LV4051APWR TSSOP PW 16 2000 367.0 367.0 35.0 SN74LV4051APWR TSSOP PW 16 2000 364.0 364.0 27.0 SN74LV4051APWRG4 TSSOP PW 16 2000 367.0 367.0 35.0 SN74LV4051APWT TSSOP PW 16 250 367.0 367.0 35.0 SN74LV4051ARGYR VQFN RGY 16 3000 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MPDS006C - FEBRUARY 1996 - REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0-8 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. Falls within JEDEC: 24/48 Pins - MO-153 14/16/20/56 Pins - MO-194 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated