BIPOLAR ANALOG + DIGITAL INTEGRATED CIRCUIT
µ
PB1007K
REFERENCE FREQUENCY 16.368 MHz, 2nd IF FREQUENCY 4.092 MHz
RF/IF FREQUENCY DOWN-CONVERTER +
PLL FREQUENCY SYNTHESIZER IC FOR GPS RECEIVER
DESCRIPTION
The
µ
PB1007K is a silicon monolithic integrated circuit for GPS receiver. This IC is designed as double conversion
RF block integrated Pre-Amplifier + RF/IF down-converter + PLL frequency synthesizer on 1 chip.
This IC is lower current than the
µ
PB1005K and packaged in a 36-pin QFN package.
This IC is manufactured using our 30 GHz fmax UHS0 (Ultra High Speed Process) silicon bipolar process.
FEATURES
• Double conversion : fREFin = 16.368 MHz, f1stIFin = 61.380 MHz, f2ndIFin = 4.092 MHz
• Integrated RF block : Pre-Amplifier + RF/IF frequency down-converter + PLL frequency synthesizer
• Needless to input counter data : fixed division internal prescaler
• VCO side division : ÷200 (÷25, ÷8 serial prescaler)
• Reference division : ÷2
• Supply voltage : VCC = 2.7 to 3.3 V
• Low current consumption : ICC = 25.0 mA TYP. @ VCC = 3.0 V
• Gain adjustable externally : Gain control voltage pin (control voltage up vs. gain down)
• On-chip pre-amplifier : GP = 15.5 dB TYP. @ f = 1.57542 GHz
NF = 3.2 dB TYP. @ f = 1.57542 GHz
• Power-save function : Power-save dark current ICC(PD) = 5
µ
A MAX.
• High-density surface mountable : 36-pin plastic QFN
APPLICATIONS
• Consumer use GPS receiver of reference frequency 16.368 MHz, 2nd IF frequency 4.092 MHz (for general use)
ORDERING INFORMATION
Part Number Package Supplying Form
µ
PB1007K-E1-A 36-pin plastic QFN • 12 mm wide embossed taping
• Pin 1 indicates pull-out direction of tape
• Qty 2.5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order:
µ
PB1007K-A
Caution Electro-static sensitive devices
Document No. PU10014EJ02V0DS (2nd edition)
Date Published February 2002 CP(K)
©
NEC Compound Semiconductor Devices 2001,
2002
The mark shows major revised points.
µ
PB1007K
PRODUCT LINE-UP (TA = +25°C, VCC = 3.0 V)
Type Part Number Functions
(Frequency unit: MHz) VCC
(V) ICC
(mA) CG
(dB) Package Status
µ
PB1007K Pre-amplifier + RF/IF
down-converter + PLL
synthesizer
REF = 16.368
1stIF = 61.380/2ndIF = 4.092
2.7 to 3.3 25.0 100 to
120 36-pin plastic QFN New Device
µ
PB1005GS
30-pin plastic SSOP
Clock
Frequency
Specific
1 chip IC
µ
PB1005K
RF/IF down-converter
+ PLL synthesizer
REF = 16.368
1stIF = 61.380/2ndIF = 4.092
2.7 to 3.3 45.0 76 to 96
36-pin plastic QFN
Available
Remark Typical performance. Please refer to ELECTRICAL CHARACTERISTICS in detail.
To know the associated products, please refer to their latest data sheets.
SYSTEM APPLICATION EXAMPLE
GPS receiver RF block diagram
1 600f
0
RF-MIX
out
60f
0
1540f
0
BPFBPF
IF-MIX
in
IF-MIXout
4f
0
BPF 2ndIF
in
1
VGC
2ndIF
in
2
2ndIFbypass
2ndIF-Amp
IF-MIX 4.092 MHz
16f
0
to DemdulatorBuffer
to Demdulator
REF
1/2
PD
8f
0
8f
0
8f
0
16f
0
LO
out
64f
0
1/8
1/25
1stLO-OSC2
1stLO-OSC1
TCXO
16.368 MHz
4f
0
REF
out
2
Buffer
16.368 MHz
RF-MIX
Pre-Amp
OSC
1575.42 MHz
from
Antenna
CHARGE
PUMP
LOOP
FILTER
• PB1007K is in
•f
0
= 1.023 MHz in the diagram
µ
Caution This diagram schematically shows only the
µ
PB1007K’s internal functions on the system.
This diagram do es not present the actual application circuits.
Data Sheet PU10014EJ02V0DS
2
µ
PB1007K
PIN CONNECTION AND INTERNAL BLOCK DIAGRAM
Top View
123456789
IF-MIXout
Pre-AMPin
RF-MIXout
IF-MIXin
REFout1
REFin2
REFout2
LOout
CPout
Power Down2
Power Down1
GND
(PLL Block)
VCC
(PLL Block)
GND
(IF-MIX)
GND
(Pre-AMP)
VGC
(IF-MIX)
VCC
(IF-MIX)
VCC
(RF-MIX)
VCC
(Vreg)
GND
(Vreg)
GND
(RF-MIX)
Pre-AMPout
1stLO-OSC1
1stLO-OSC2
VCC
(1stLO-OSC)
VCC
(PLL Block) REFin1
VCC
(REF Block)
VCC
(2nd IF-AMP)
GND
(REF Block)
GND
(2nd IF-AMP)
2ndIFout
2ndIFbypass
2ndIFin2
2ndIFin1
RF-MIXin
PD
CP
÷2
÷8
÷25
27
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
26 25 24 23 22 21 20 19
Reg
Data Sheet PU10014EJ02V0DS 3
µ
PB1007K
PIN EXPLANATION
Pin
No. Pin Name Applied
Voltage
(V)
Pin
Voltage
(V)
Function and Application Internal Equivalent Circuit
1 Pre-AMPout − voltage
as same
as VCC
Output pin of Pre-amplifier.
Output biasing and matching
required as it is a open collector
output.
2 VCC(Vreg) 2.7 to 3.3 − Supply voltage pin of voltage
regulator.
This pin should be externally
equipped with bypass capacitor to
minimize ground impedance.
3 GND(Vreg) 0 − Ground pin of voltage regulator.
35 Pre-AMPin − 0.79 Input pin of Pre-amplifier.
LC matching circuit must be
connected to this pin.
36 GND(Pre-AMP) 0 − Ground pin of Pre-amplifier.
36
3
1
2
35
Regulator
4 RF-MIXin − 1.00 Input pin of RF mixer.
1 575.42 MHz band pass filter can
be inserted between pin 1 and 4.
5 GND(RF-MIX) 0 − Ground pin of RF mixer.
33 RF-MIXout − 1.30 Output pin of RF mixer.
1st IF filter must be inserted
between pin 31 and 33.
34 VCC(RF-MIX) 2.7 to 3.3 − Supply voltage pin of RF mixer.
This pin should be externally
equipped with bypass capacitor to
minimize ground impedance.
1stLO-
OSC
5
33
34
4
6
1stLO-OSC1 − 1.80
7 1stLO-OSC2 − 1.80
Pin 6 and 7 are each base pin of
differential amplifier for 1st LO
oscillator. These pins should be
equipped with LC and varactor to
oscillate on 1 636.80 MHz as
VCO.
8 VCC(1stLO-OSC) 2.7 to 3.3 − Supply voltage pin of differential
amplifier for 1st LO oscillator
circuit.
RF-MIX or
Prescaler
input
6
21
8
7
Data Sheet PU10014EJ02V0DS
4
µ
PB1007K
Pin
No. Pin Name Applied
Voltage
(V)
Pin
Voltage
(V)
Function and Application Internal Equivalent Circuit
9 VCC(PLL Block) 2.7 to 3.3 − Supply voltage pin of PLL block.
This pin should be externally
equipped with bypass capacitor to
minimize ground impedance.
10 CPout − Output in
accordance
with phase
difference.
Output pin of charge-pump.
This pin should be equipped with
external RC in order to adjust
dumping factor and cut-off
frequency. This tuning voltage
output must be connected to
varactor diode of 1stLO-OSC.
11 GND(PLL Block) 0 − Ground pin of PLL block.
21
9
10
11
PD CP
12
12 VCC(PLL Block) 2.7 to 3.3 − Supply voltage pin of PLL block.
This pin should be externally
equipped with bypass capacitor to
minimize ground impedance.
13 LOout − 1.85 Monitor pin of 1/200 prescaler
output.
14 REFout2 − 1.68 Monitor pin of 1/2 prescaler
output.
15 Power Down1 0 or VCC − Stand-by mode control pin of Pre-
amplifier block, 1stLO-OSC block,
charge pump prescaler block, LO
output amplifier, RF mixer, IF
mixer, 2ndIF amplifier.
21
12
13
1st
LO-
OSC
IF-MIX PDPD
÷
25
÷8
14 ÷2
Ref.
Low OFF
High ON
Data Sheet PU10014EJ02V0DS 5
µ
PB1007K
Pin
No. Pin Name Applied
Voltage
(V)
Pin
Voltage
(V)
Function and Application Internal Equivalent Circuit
16 Power Down2 0 or VCC − Stand-by mode control pin of
reference block.
17 REFout1 − − Output pin of reference frequency.
The frequency from pin 19 can be
taken out as 3 VP-P swing.
18 REFin2 − 2.45 Input pin of reference frequency.
This pin should be grounded
through capacitor.
19 REFin1 − 2.45 Input pin of reference frequency.
This pin can use as an input pin of
reference frequency buffer.
This pin should be equipped with
external 16.368 MHz oscillator
(example: TCXO).
20 VCC(REF Block) 2.7 to 3.3 − Supply voltage pin of reference
block.
This pin should be externally
equipped with bypass capacitor to
minimize ground impedance.
21 GND(REF Block) 0 − Ground pin of reference block.
Low OFF
High ON
1/2
Prescaler
17
20
21
19
18
12
22 2ndIFout − 1.80 Output pin of 2nd IF amplifier.
This pin output 4.092 MHz.
This pin should be equipped with
external buffer amplifier to adjust
level to next stage on user’s
system.
23 VCC(2nd IF-AMP) 2.7 to 3.3 − Supply voltage pin of 2nd IF
amplifier.
This pin should be externally
equipped with bypass capacitor to
minimize ground impedance.
24 2ndIFbypass − 2.10 Bypass pin of 2nd IF amplifier.
This pin should be grounded
through capacitor.
25 2ndIFin2 − 2.10 Pin of 2nd IF amplifier input 2.
This pin should be grounded
through capacitor.
26 2ndIFin1 − 2.10 Pin of 2nd IF amplifier input 1.
2nd IF filter can be inserted
between 26 and 28.
27 GND(2nd IF-AMP) 0 − Ground pin of 2nd IF amplifier.
26
25
24
22
27
23
Data Sheet PU10014EJ02V0DS
6
µ
PB1007K
Pin
No. Pin Name Applied
Voltage
(V)
Pin
Voltage
(V)
Function and Application Internal Equivalent Circuit
28 IF-MIXout − 1.0 Output pin of IF mixer.
IF mixer output signal goes
through gain control amplifier
before this emitter follower output
port.
29 VCC(IF-MIX) 2.7 to 3.3 − Supply voltage pin of IF mixer.
This pin should be externally
equipped with bypass capacitor to
minimize ground impedance.
30 VGC(IF-MIX) 0 to 3.3 − Gain control voltage pin of IF
mixer output amplifier. This
voltage performs forward control
(VGC up → Gain down).
31 IF-MIXin − 1.97 Input pin of IF mixer.
32 GND(IF-MIX) 0 − Ground pin of IF mixer.
32
29
30
28
31
2ndLO
Caution Ground pattern on the board must be formed as w ide as possible to minimize ground impedance.
Data Sheet PU10014EJ02V0DS 7
µ
PB1007K
ABSOLUTE MAXIMUM RATINGS
Parameter Symbol Test Conditions Ratings Unit
Supply Voltage VCC TA = +25°C 3.6 V
Total Circuit Current ICCTotal TA = +25°C 100 mA
Power Dissipation PD TA = +85°C Note 360 mW
Operating Ambient Temperature TA −40 to +85 °C
Storage Temperature Tstg −55 to +150 °C
Note Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB
RECOMMENDED OPERATING RANGE
Parameter Symbol MIN. TYP. MAX. Unit
Supply Voltage VCC 2.7 3.0 3.3 V
Operating Ambient Temperature TA −40 +25 +85 °C
RF Input Frequency fRFin − 1 575.42 − MHz
1st LO Oscillating Frequency f1stLOin − 1 636.80 − MHz
1st IF Input Frequency f1stIFin − 61.380 − MHz
2nd LO Input Frequency f2ndLOin − 65.472 − MHz
2nd IF Input Frequency f2ndIFin − 4.092 − MHz
Reference Input/Output Frequency fREFin
fREFout
− 16.368 − MHz
LO Output Frequency fLOout − 8.184 − MHz
Data Sheet PU10014EJ02V0DS
8
µ
PB1007K
ELECTRICAL CHARACTERISTICS (TA = +25°C, VCC = 3.0 V)
Parameter Symbol Test Conditions MIN. TYP. MAX. Unit
Total Circuit Current ICCTotal All block operating @ PLL lock 19.0 25.0 35.0 mA
Power-save Dark Current ICC(PD) Pin 15 = Pin 16 = 0 V − − 5
µ
A
Reference Block Circuit Current ICCREF Pin 15 = 0 V, Pin 16 = 3 V − 3 4 mA
Pre-amplifier Block (fRFin = 1 575.42 MHz, ZS = ZL = 50 Ω)
Circuit Current 1 ICC1 No Signals 1.65 2.50 3.50 mA
Power Gain GP Input/Output matching, PRFin = −40 dBm 12.5 15.5 18.5 dB
Noise Figure NF Input/Output matching − 3.2 4.0 dB
RF Down-converter Block (fRFin = 1 575.42 MHz, f1stLOin = 1 636.80 MHz, PLOin = −10 dBm, ZS = ZL = 50 Ω)
Circuit Current 2 ICC2 No Signals 5.2 7.0 9.9 mA
RF Conversion Gain CGRF PRFin = −40 dBm 15.5 18.5 21.5 dB
RF-SSB Noise Figure NFRF − 10.5 13.5 dB
RF Saturated Output Power PO(sat)RF PRFin = −10 dBm −4 −1 − dBm
IF Down-converter Block (f1stIFin = 61.38 MHz, f2ndLOin = 65.472 MHz, ZS = 50 Ω, ZL = 2 kΩ)
Circuit Current 3 ICC3 No Signals 2.7 3.5 5.0 mA
IF Conversion Voltage Gain CG(GV)IF at Maximum Gain, P1stIFin = −50 dBm 40 43 46 dB
IF-SSB Noise Figure NFIF at Maximum Gain − 11.5 14.5 dB
2nd IF Saturated Output Power PO(sat)2ndIF at Maximum Gain, P1stIFin = −20 dBm −9.0 −6.0 − dBm
Gain Control Voltage VGC Voltage at Maximum Gain CGIF − − 1.0 V
Gain Control Range DGC P1stIFin = −50 dBm 20 − − dB
2nd IF Amplifier (f2ndIFin = 4.092 MHz, ZS = 50 Ω, ZL = 2 kΩ)
Circuit Current 4 ICC4 No Signals 0.8 1.0 1.6 mA
Voltage Gain GV P2ndIFin = −60 dBm 40 43 46 dB
2nd IF Saturated Output Power PO(sat)2ndIF P2ndIFin = −30 dBm −14.0 −11.0 − dBm
PLL Synthesizer Block
Circuit Current 5 ICC5 PLL All Block Operating 8.7 11.0 14.4 mA
Loop Filter Output (High) VOH 2.8 − − V
Loop Filter Output (Low) VOL − − 0.4 V
Reference Minimum Input Level VREFin ZL = 100 kΩ//0.6 pF
Impedance of measurement equipment 200 − − mVP-P
Reference Output Swing VREFout ZL = 100 kΩ//0.6 pF
Impedance of measurement equipment 2.9 3.0 − VP-P
Data Sheet PU10014EJ02V0DS 9
µ
PB1007K
STANDARD CHARACTERISTICS (TA = +25°C, VCC = 3.0 V)
Parameter Symbol Test Conditions Reference Unit
Pre-amplifier Block (fRFin = 1 575.42 MHz, ZS = ZL = 50 Ω)
Input 1dB Compression Level Pin(1dB) Input/Output matching −20 dBm
RF Down-converter Block (P1stLOin = −10 dBm, ZS = ZL = 50 Ω)
LO Leakage to IF Pin LOif f1stLOin = 1 636.80 MHz −37 dBm
LO Leakage to RF Pin LOrf f1stLOin = 1 636.80 MHz −36 dBm
Input 3rd Order Intercept Point IIP3(RF) fRFin1 = 1 600 MHz, fRFin2 = 1 605 MHz,
f1stLOin = 1 660 MHz
−15 dBm
IF Down-converter Block (1st LO oscillating, ZS = 50 Ω, ZL = 2 kΩ)
LO Leakage to 1st IF Pin LO1stif f2ndLOin = 65.472 MHz −90 dBm
LO Leakage to 2nd IF Pin LO2ndif f2ndLOin = 65.472 MHz −63 dBm
Input 3rd Order Intercept Point IIP3(IF) f1stIFin1 = 61.38 MHz, f1stIFin2 = 61.48 MHz,
f2ndLOin = 65.472 MHz
−27.5 dBm
PLL Synthesizer Block
Phase Comparing Frequency fPD PLL loop 8.184 MHz
VCO Block
Phase Noise C/N PLL Loop,
∆
1 kHz of VCO wave 83 dBc/Hz
Data Sheet PU10014EJ02V0DS
10
µ
PB1007K
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC = 3.0 V)
⎯ IC TOTAL ⎯
40
35
30
25
20
15
10
5
01234
Total Circuit Current I
CCTotal
(mA)
Supply Voltage V
CC
(V)
TOTAL CIRCUIT CURRENT
vs. SUPPLY VOLTAGE
PLL lock
T
A
= +85˚C
T
A
= +25˚C
T
A
= –40˚C
⎯ PRE-AMPLIFIER BLOCK ⎯
4
3
2
1
01234
Circuit Current I
CC
(mA)
Supply Voltage V
CC
(V)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
No signal
+10
0
–10
–20
–30
–40
–50 –50 –40–60 –30 –20 –10 0
Output Power P
out
(dBm)
Input Power P
in
(dBm)
OUTPUT POWER vs. INPUT POWER
f
RFin
= 1 575.42 MHz
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
+10
0
–10
–20
–30
–40
–50 –50 –40–60 –30 –20 –10 0
Output Power P
out
(dBm)
Input Power P
in
(dBm)
OUTPUT POWER vs. INPUT POWER
V
CC
= 3 V
f
RFin
= 1 575.42 MHz
T
A
= +85˚C
T
A
= +25˚C
T
A
= –40˚C
Data Sheet PU10014EJ02V0DS 11
µ
PB1007K
⎯ RF DOWN-CONVERTER BLOCK ⎯
2
1.5
1
0.5
01234
Circuit Current I
CC
(mA)
Supply Voltage V
CC
(V)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
No signal
+10
0
–10
–20
–30
–40
–50 –40–60 –20 0 +20
1stIF Output Power P
1stIFout
(dBm)
RF Input Power P
RFin
(dBm)
1stIF OUTPUT POWER
vs. RF INPUT POWER
f
RFin
= 1 575.42 MHz
f
LOin
= 1 636.8 MHz
P
LOin
= –10 dBm
f
1stIFout
= 61.38 MHz
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3.3 V
–10
–20
–30
–40
–50
–60 –40 –30–50 –20 –10 0 +10
1stIF Output Power P
1stIFout
(dBm)
1stLO Input Power P
1stLOin
(dBm)
vs. 1stLO INPUT POWER
1stIF OUTPUT POWER
f
RFin
= 1 575.42 MHz
P
RFin
= –40 dBm
f
1stLOin
= 1 636.8 MHz
f
1stIFout
= 61.38 MHz
V
CC
= 3.0 V
V
CC
= 2.7 V
V
CC
= 3.3 V
30
25
15
10
5
20
0
0.1 0.2 0.3 0.5 1 2
RF Input Frequency f
RFin
(GHz)
vs. RF INPUT FREQUENCY
RF CONVERSION GAIN
RF Conversion Gain CG
RF
(dB)
P
RFin
= –40 dBm
P
1stLOin
= –10 dBm
f
1stIFout
= 61.38 MHz
f
LO
= f
RFin
+ f
1stIFout
V
CC
= 3.3 V
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3 V
f
RFin
= 1 575.42 MHz
f
LOin
= 1 636.8 MHz
P
LOin
= –10 dBm
f
1stIFout
= 61.38 MHz
T
A
= –40˚C
T
A
= +25˚C
T
A
= +85˚C
+10
0
–10
–20
–30
–40
–50 –40–60 –20 0 +20
1stIF Output Power P
1stIFout
(dBm)
RF Input Power P
RFin
(dBm)
1stIF OUTPUT POWER
vs. RF INPUT POWER
Data Sheet PU10014EJ02V0DS
12
µ
PB1007K
f
RFin
= 1 575.42 MHz
P
RFin
= –40 dBm
P
1stLOin
= –10 dBm
f
LOin
= f
RFin
+ f
1stIFout
Upper local
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
30
25
15
10
5
20
0
10 30 50 100 300
1stIF Output Frequency f
1stIFout
(MHz)
1stIF OUTPUT FREQUENCY
RF CONVERSION GAIN vs.
RF Conversion Gain CG
RF
(dB)
VCC = 3 V
fRFin1 = 1 600 MHz
fRFin2 = 1 605 MHz
f1stLOin = 1 660 MHz
P1stLOin = –10 dBm
+20
0
–20
–40
–60
–80 –70 –60 –50–80 –40 –30 –20 –10 0
RF Input Power of Each Tone P
RFin (each)
(dBm)
vs. RF INPUT POWER OF EACH TONE
1stIF OUTPUT POWER OF EACH TONE
1stIF Output Power of Each Tone P
1stIFout (each)
(dBm)
⎯ IF DOWN-CONVERTER BLOCK ⎯
5
4
3
2
1
01234
Circuit Current I
CC
(mA)
Supply Voltage V
CC
(V)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
No signal
f
1stIFin
= 61.38 MHz
f
2ndLOin
= 65.472 MHz
P
2ndLOin
= –10 dBm
f
2ndIFout
= 4.092 MHz
V
GC
= GND
V
CC
= 3.3 V
V
CC
= 3.0 V
V
CC
= 2.7 V
0
–10
–20
–30
–40
–50 –70 –60 –50–80 –40 –20–30 –10 0
2ndIF Output Power P
2ndIFout
(dBm)
1stIF Input Power P
1stIFin
(dBm)
2ndIF OUTPUT POWER
vs. 1stIF INPUT POWER
V
CC
= 3 V
f
1stIFin
= 61.38 MHz
f
2ndLOin
= 65.472 MHz
P
2ndLOin
= –10 dBm
f
2ndIFout
= 4.092 MHz
V
GC
= GND
T
A
= +25˚C
T
A
= –40˚C
T
A
= +85˚C
0
–10
–20
–30
–40
–50 –70 –60 –50–80 –40 –20–30 –10 0
2ndIF Output Power P
2ndIFout
(dBm)
1stIF Input Power P
1stIFin
(dBm)
2ndIF OUTPUT POWER
vs. 1stIF INPUT POWER
Data Sheet PU10014EJ02V0DS 13
µ
PB1007K
P
1stIFin
= –50 dBm
P
2ndLOin
= –10 dBm
f
2ndIFout
= 4.092 MHz
V
GC
= GND
VCC = 3.3 V
VCC = 2.7 V
VCC = 3.0 V
50
45
35
30
25
40
20
10 30 50 70 100
1stIF Input Frequency f1stIFin (MHz)
vs.1stIF INPUT FREQUENCY
IF CONVERSION VOLTAGE GAIN
IF Conversion Voltage Gain CG(GV)IF (dB)
f
1stIFin
= 61.38 MHz
P
1stIFin
= –50 dBm
P
2ndLOin
= –10 dBm
f
2ndIFout
= f
1stIFin
– f
2ndLOin
V
GC
= GND
VCC = 3.3 V
VCC = 3.0 V
VCC = 2.7 V
50
45
35
30
25
40
20135710
2ndIF Output Frequency f2ndIFout (MHz)
vs. 2ndIF OUTPUT FREQUENCY
IF CONVERSION VOLTAGE GAIN
IF Conversion Voltage Gain CG(GV)IF (dB)
f
1stIFin
= 61.38 MHz
P
1stIFin
= –50 dBm
f
2ndLOin
= 65.472 MHz
f
2ndIFout
= 4.092 MHz
VCC = 3.3 V
VCC = 3.0 V
VCC = 2.7 V
50
40
20
10
0
30
–1000.5 1 1.5 2 2.5 3
Gain Control Voltage VGC (V)
vs. GAIN CONTROL VOLTAGE
IF CONVERSION VOLTAGE GAIN
IF Conversion Voltage Gain CG(GV)IF (dB)
V
CC
= 3 V
P
1stIFin
= –50 dBm
P
2ndLOin
= –10 dBm
f
2ndIFout
= 4.092 MHz
V
GC
= GND
TA = –40˚C
TA = +25˚C
TA = +85˚C
50
45
35
30
25
40
20
10 30 50 70 100
1stIF Input Frequency f1stIFin (MHz)
vs.1stIF INPUT FREQUENCY
IF CONVERSION VOLTAGE GAIN
IF Conversion Voltage Gain CG(GV)IF (dB)
V
CC
= 3 V
f
1stIFin
= 61.38 MHz
P
1stIFin
= –50 dBm
P
2ndLOin
= –10 dBm
f
2ndIFout
= f
1stIFin
– f
2ndLOin
V
GC
= GND
TA = –40˚C
TA = +25˚C
TA = +85˚C
50
45
35
30
25
40
2013571
2ndIF Output Frequency f2ndIFout (MHz)
vs. 2ndIF OUTPUT FREQUENCY
IF CONVERSION VOLTAGE GAIN
IF Conversion Voltage Gain CG(GV)IF (dB)
V
CC
= 3 V
f
1stIFin
= 61.38 MHz
P
1stIFin
= –50 dBm
f
2ndLOin
= 65.472 MHz
f
2ndIFout
=4.092 MHz
0
TA = –40˚C
TA = +85˚C
TA = +25˚C
50
40
20
10
0
30
–1000.5 1 1.5 2 2.5 3
Gain Control Voltage VGC (V)
vs. GAIN CONTROL VOLTAGE
IF CONVERSION VOLTAGE GAIN
IF Conversion Voltage Gain CG(GV)IF (dB)
Data Sheet PU10014EJ02V0DS
14
µ
PB1007K
V
CC
= 3 V
f
1stIFin
1 = 61.38 MHz
f
1stIFin
2 = 61.48 MHz
f
2ndLOin
= 65.472 MHz
P
2ndLOin
= –10 dBm
V
GC
= GND
0
–20
–10
–40
–30
–60
–50
–80
–90
–70
–100 –70 –60–80 –50 –40 –30 –20
1stIF Input Power of Each Tone P1stIFin (each) (dBm)
vs. 1stIF INPUT POWER OF EACH TONE
2ndIF OUTPUT POWER OF EACH TONE
2ndIF Output Power of Each Tone P2ndIFout (each) (dBm)
⎯ IF AMPLIFIER BLOCK ⎯
6
5
4
3
2
1
01234
Circuit Current I
CC
(mA)
Supply Voltage V
CC
(V)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
No signal
f
2ndIFin
= 4.092 MHz
R
L
= 2 kΩ
V
CC
= 3 V
f
2ndIFin
= 4.092 MHz
R
L
= 2 kΩ
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3.3 V
0
–10
–20
–30
–40
–50 –70 –60 –50–80 –40 –20–30 –10 0
2ndIF Output Power P
2ndIFout
(dBm)
2ndIF Input Power P
2ndIFin
(dBm)
2ndIF OUTPUT POWER
vs. 2ndIF INPUT POWER
T
A
= +85˚C
T
A
= +25˚C
T
A
= –40˚C
0
–10
–20
–30
–40
–50 –70 –60 –50–80 –40 –20–30 –10 0
2ndIF Output Power P
2ndIFout
(dBm)
2ndIF Input Power P
2ndIFin
(dBm)
2ndIF OUTPUT POWER
vs. 2ndIF INPUT POWER
Data Sheet PU10014EJ02V0DS 15
µ
PB1007K
P2ndIFin = –60 dBm
RL = 2 kΩ
VCC = 3.3 V
VCC = 2.7 V
VCC = 3.0 V
50
40
35
45
30
0.1 1 10 100
2ndIF Input Frequency f2ndIFin (MHz)
2ndIF INPUT FREQUENCY
VOLTAGE GAIN vs.
Voltage Gain GV (dB)
VCC = 3 V
P2ndIFin = –60 dBm
RL = 2 kΩ
TA = –40˚C
TA = +85˚C
TA = +25˚C
50
40
35
45
30
0.1 1 10 100
2ndIF Input Frequency f2ndIFin (MHz)
2ndIF INPUT FREQUENCY
VOLTAGE GAIN vs.
Voltage Gain GV (dB)
⎯ PLL SYNTHESIZER BLOCK ⎯
14
12
10
8
6
4
2
01234
Circuit Current I
CC
(mA)
Supply Voltage V
CC
(V)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
No signal
⎯ REFERENCE BLOCK ⎯
PREFin = 0 dBm
VCC = 3.3 V
VCC = 2.7 V
VCC = 3.0 V
4.0
2.0
3.5
2.5
1.5
0.5
1.0
3.0
0.01 10 100
Reference Input Frequency fREFin (MHz)
REFERENCE INPUT FREQUENCY
REFERENCE OUTPUT SWING vs.
Reference Output Swing VREFout (VP-P)
VCC = 3 V
PREFin = 0 dBm
TA = –40˚C
TA = +25˚C
TA = +85˚C
4.0
2.0
3.5
2.5
1.5
0.5
1.0
3.0
0.01 10 100
Reference Input Frequency fREFin (MHz)
REFERENCE INPUT FREQUENCY
REFERENCE OUTPUT SWING vs.
Reference Output Swing VREFout (VP-P)
Data Sheet PU10014EJ02V0DS
16
µ
PB1007K
fREFin = 16.368 MHz
RL = 100 kΩ//0.6 pF
VCC = 3.3 V
VCC = 2.7 V
VCC = 3.0 V
4.0
2.0
3.5
2.5
1.5
0.5
1.0
3.0
0.0
–50 –20 –10 0–40 –30 +10
Reference Input Power PREFin (dBm)
REFERENCE INPUT POWER
REFERENCE OUTPUT SWING vs.
Reference Output Swing VREFout (VP-P)
VCC = 3 V
fREFin = 16.368 MHz
RL = 100 kΩ//0.6 pF
TA = –40˚C
TA = +85˚C
TA = +25˚C
4.0
2.0
3.5
2.5
1.5
0.5
1.0
3.0
0.0
–50 –20 –10 0–40 –30 +10
Reference Input Power PREFin (dBm)
REFERENCE INPUT POWER
REFERENCE OUTPUT SWING vs.
Reference Output Swing VREFout (VP-P)
Remark The graphs indicate nominal characteristics.
Data Sheet PU10014EJ02V0DS 17
µ
PB1007K
MEASUREMENT CIRCUIT
MEASUREMENT CIRCUIT 1 (Pre-Amplifier Block)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
1.95 kΩ
50 Ω
Terminater
10 nF
50 Ω
Signal
Generater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
10 nF
10 nF
10 nF 10 nF
50 Ω
Signal
Generater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 F
µ
1 F
µ
2 nF
15 nF
3.9 nH
1SV285
100
pF
22
pF 22
pF
10 nF
100 pF 1 nF
1 pF
50 Ω
Terminater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Spectrum
Analyzer
4.7 kΩ
4.7 kΩ
750 Ω
0.1 F
µ
MEASUREMENT CIRCUIT 2 (Pre-Amplifier Block: NF)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Signal
Generater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 F
µ
1 F
µ
4.7 nH
1.95 kΩ
50 Ω
Terminater
10 nF
10 nF 50 pF10 nF 10 pF
10 nF
10 nF
10 nF
10 nF
1 nF1 nF
2 nF
15 nF
3.9 nH
1SV285
100
pF
22
pF 22
pF
10 nF
100 pF 1 nF
1 pF
50 Ω
Terminater
1 pF
2.7 nH
10 nF10 pF 10 nF
4.7 kΩ
4.7 kΩ
750 Ω
0.1 F
µ
NF Meter
Noise Source
Data Sheet PU10014EJ02V0DS
18
µ
PB1007K
MEASUREMENT CIRCUIT 3 (RF-MIX Block)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Terminater
50 Ω
Terminater
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω
Signal
Generater
50 Ω
Signal
Generater
1 pF
2.7 nH
10 nF10 pF 10 nF 50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Spectrum Analyzer
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
MEASUREMENT CIRCUIT 4 (RF-MIX Block: NF)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Terminater
50 Ω
Terminater
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω
Signal
Generater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
NF Meter
Noise Source
Data Sheet PU10014EJ02V0DS 19
µ
PB1007K
MEASUREMENT CIRCUIT 5 (IF Down-Converter Block)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Terminater
50 Ω
Terminater
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω
Terminater
50 Ω
Signal
Generater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Terminater
50 Ω
Signal Generater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Spectrum Analyzer
MEASUREMENT CIRCUIT 6 (IF Down-Converter Block: NF)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Terminater
50 Ω
Terminater
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω
Terminater
50 Ω
Signal
Generater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
Noise Source
NF Meter
Data Sheet PU10014EJ02V0DS
20
µ
PB1007K
MEASUREMENT CIRCUIT 7 (IF Amplifier Block)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Signal
Generater
50 Ω
Spectrum
Analyzer
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω
Terminater
50 Ω
Terminater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Terminater
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
MEASUREMENT CIRCUIT 8 (IF Amplifier Block: NF)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω50 Ω
TerminaterTerminater
1 pF
2.7 nH
10 nF10 pF 10 nF 50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Terminater
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
Noise Source
NF Meter
Data Sheet PU10014EJ02V0DS 21
µ
PB1007K
MEASUREMENT CIRCUIT 9 (IF Amplifier Block: Output Swing)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω
Terminater
50 Ω
Terminater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Terminater
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Signal
Generater
50 Ω
Terminater
Oscilloscope
MEASUREMENT CIRCUIT 10 (1/2 Prescaler)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Singal
Generater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Terminater
50 Ω
Terminater
1 nF
100
pF
10 nF
100 pF 1 nF
50 Ω50 Ω
Terminater Terminater
1 pF
2.7 nH
10 nF10 pF 10 nF 50 Ω
Terminater
0.1 F
µ
0.1
F
µ
1.95 kΩ
50 Ω
Terminater
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
1 F
µ
1 nF
50 Ω
Spectrum
Analyzer
Data Sheet PU10014EJ02V0DS
22
µ
PB1007K
MEASUREMENT CIRCUIT 11 (1/200 Prescaler)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Terminater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Terminater
50 Ω
Terminater
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
50 Ω
Terminater
1 F
µ
50 Ω
Spectrum
Analyzer
1.95 kΩ
50 Ω
Terminater
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
100
pF
10 nF
100 pF 1 nF
50 Ω
Terminater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Terminater
0.1 F
µ
10
nF 10
nF
50 Ω
Signal
Generater
50 Ω
Terminater
Transformer
MEASUREMENT CIRCUIT 12 (REF Output)
123456789
28
29
30
31
32
33
34
35
36
18
17
16
15
14
13
12
11
10
27 26 25 24 23 22 21 20 19
PD
CP
÷8
Reg
÷25
÷2
10 nF
10 nF
10 nF 10 nF
50 Ω
Signal
Generater
1.95 kΩ
0.1 F
µ
0.1 F
µ
0.1 F
µ
50 Ω
Terminater
50 Ω
Terminater
0.1 F
µ
0.1 F
µ
0.1 F
µ
1 F
µ
1 F
µ
Oscilloscope
1 F
µ
50 Ω
Terminater
1.95 kΩ
50 Ω
Terminater
50 Ω
Terminater
10 nF
50 Ω
Terminater
1 nF1 nF
10 nF 50 pF10 nF 10 pF
4.7 nH
10 nF
10 nF
10 nF
10 nF
50 Ω
Terminater
100
pF
10 nF
100 pF 1 nF
50 Ω
Terminater
1 pF
2.7 nH
10 nF10 pF 10 nF
50 Ω
Terminater
0.1 F
µ
10
nF 10
nF
50 Ω
Terminater
50 Ω
Terminater
Data Sheet PU10014EJ02V0DS 23
µ
PB1007K
PACKAGE DIMENSIONS
36-PIN PLASTIC QFN (UNIT: mm)
6.2±0.2
6.0±0.2
0.22±0.05 0.55±0.2
0.5
(Bottom View)
6.2±0.2
6.0±0.2
1.0MAX.
0.14
+0.10
–0.05
6.2±0.2
6.0±0.2
6.2±0.2
6.0±0.2
36 Pin
1 Pin
Data Sheet PU10014EJ02V0DS
24
µ
PB1007K
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent abnormal oscillation).
(3) Keep the wiring length of the ground pins as short as possible.
(4) Connect a bypass capacitor (example: 1 000 pF) to the VCC pin.
(5) High-frequency signal I/O pins must be coupled with the external circuit using a coupling capacitor.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Soldering Conditions Condition Symbol
Infrared Reflow Peak temperature (package surface temperature) : 260°C or below
Time at peak temperature : 10 seconds or less
Time at temperature of 220°C or higher : 60 seconds or less
Preheating time at 120 to 180°C : 120±30 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
IR260
VPS Peak temperature (package surface temperature) : 215°C or below
Time at temperature of 200°C or higher : 25 to 40 seconds
Preheating time at 120 to 150°C : 30 to 60 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
VP215
Wave Soldering Peak temperature (molten solder temperature) : 260°C or below
Time at peak temperature : 10 seconds or less
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes : 1 time
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
WS260
Partial Heating Peak temperature (pin temperature) : 350°C or below
Soldering time (per side of device) : 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PU10014EJ02V0DS 25
µ
PB1007K
M8E 00. 4 - 0110
The information in this document is current as of February, 2002. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
•
•
•
•
•
•
Data Sheet PU10014EJ02V0DS
26
µ
PB1007K
NEC Compound Semiconductor Devices Hong Kong Limited
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
TEL: +852-3107-7303
TEL: +886-2-8712-0478
TEL: +82-2-528-0301
FAX: +852-3107-7309
FAX: +886-2-2545-3859
FAX: +82-2-528-0302
NEC Electron Devices European Operations http://www.nec.de/
TEL: +49-211-6503-101 FAX: +49-211-6503-487
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
0110
NEC Compound Semiconductor Devices, Ltd.
5th Sales Group, Sales Division TEL: +81-3-3798-6372 FAX: +81-3-3798-6783 E-mail: salesinfo@csd-nec.com
Business issue
NEC Compound Semiconductor Devices, Ltd. http://www.csd-nec.com/
Sales Engineering Group, Sales Division
E-mail: techinfo@csd-nec.com FAX: +81-44-435-1918
Technical issue
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile:
(
408
)
988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS Concentration Limit per RoHS
(values are not yet fixed) Concentration contained
in CEL devices
-A -AZ
Lead (Pb) < 1000 PPM Not Detected (*)
Mercury < 1000 PPM Not Detected
Cadmium < 100 PPM Not Detected
Hexavalent Chromium < 1000 PPM Not Detected
PBB < 1000 PPM Not Detected
PBDE < 1000 PPM Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
