Specifications Subject To Change Without Notice www.ottoexcellence.com 112
Makes and breaks every time! Less than 25mΩ contact
resistance because the OTTO design features inherent rocking
action that breaks welds and wipes contacts clean.
The P3 is the commercial version of the P1 Pushbutton switch,
offering vastly improved life under extreme conditions found in
some industrial environments. The pushbutton is sealed by a
silicone boot operating on our patented “rolling sleeve,” providing
longer life and smoother operation over a wide temperature
range. Epoxy protects the contacts and terminals from hostile
environments and solder flux.
High contact force (120g/4.2 oz), low contact resistance
(25mΩ max) and short contact bounce are the result of our snap-
action mechanism. These characteristics provide exceptional
current carrying capabilities over the life of the switch. With the
optional low level (gold plate) configuration, the P3 is well suited
to interface directly to computers and other solid state devices.
Watertight sealing is available by simply adding “W” to your
part number. Because the P3 is a double break switch, wide
connection possibilities, longer life and greater capacity are
offered. The P3 design provides a unique terminal connection
to the moving element for added flexibility. Special versions can
be provided with five terminals to control up to four circuits.
Features:
• Buttonsealedwithpatented“rollingsleeve”principle
• Contactareasealedatbutton&terminals
• Lessthan25mΩcontactresistance
• Positivetactilefeedback
• Varietyofmountingstyles
• Engravedbuttons&bezelsavailable
• ULrecognized&CSAcertified
• 1millionmechanicalcyclelife
• WatertighttoIP68Savailable
• RoHS/WEEE/Reachcompliant
Style P3-8
Style P3-7
Style P3-6
Style P3-3 Style P3-3 with
Push-Pull Action
StandardCharacteristics/Ratings:
ELECTRICALRATINGS:
Load SeaLevel@28VDC 50,000feet@28VDC Cycles
or115VAC,60/400Hz or115VAC,60/400Hz
Resistive 10A N/A 100,000
Inductive 5A 5A 100,000
Lamp 3A N/A 100,000
Center Contact 3A max N/A 100,000
DWV 1050Vrms 400Vrms
Low Level 10mA @ 30mV max DC or peak AC
ElectricalLife: See Rating Chart
Mechanical Life: 1 million cycles, circuit forms 1, 2 & 6
100,000 cycles, circuit forms 3, 4 & 5
Seal: IP64 or IP68S
Shock: MIL-STD-202, method 207
OperatingTempRange: -55°C to +85°C
OperatingForce: 2.5 lbs. or 4.0 lbs.
ResetForce: 0.75 lb. min or 1.0 lb.
TotalTravel: 0.085 +/- 0.015 inches
Overtravel: 0.012 inches min
MovementDifferential: 0.015 inches min
MATERIALS:
Case: Anodized aluminum alloy
Button: Thermoplastic
Terminals: Brass with silver, gold for low level
TerminalHardware: Screws, lockwasher and terminal lug for screw terminal option
MountingHardware: Hex nut, lockwasher and panel seal when applicable
COMMERCIAL GRADE PUSHBUTTONS COMMERCIAL
PUSHBUTTONS
P3
MOMENTARY ACTION, SEALED, SNAP-ACTION, DOUBLE BREAK
PUSHBUTTONS