LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Downsized snap-ins, 85C
CAT. No. E1001F
@Downsize, longer life, and high ripple version of SMH series
@Endurance with ripple current : 3,000 hours at 85C
@Non solvent-proof type
@RoHS Compliant
?SPECIFICATIONS
(at 20C, 120Hz)
(at 20C after 5 minutes)
(at 20C, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Items
-
25 to +85C
160 to 450Vdc
P20% (M)
I[3 CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
Rated voltage (Vdc)
tanE (Max.)
Rated voltage (Vdc)
Z(
-
25C)/Z(+20C)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 3,000 hours at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)[200% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 85C without
voltage applied.
Capacitance change [P15% of the initial value
D.F. (tanE)[150% of the initial specified value
Leakage current [The initial specified value
Characteristics
160 to 400V
0.15
160 to 400V
4
420 & 450V
0.20
420 & 450V
8
?DIMENSIONS [mm]
*FD=35mm : 3.5P0.5mm
@Terminal Code : VS (F20 to F35) : Standard
*
4.0P0.5
FD+1max.
Vent LP2
Negative mark
Sleeve (PET : Black) PC board pin-out
10
2
-
F2
@Terminal Code : LI (F35)
Vent 4.5P1
LP2
FD+1max.
Negative mark
Sleeve (PET : Black) PC board pin-out
2
-
1.2B6
5P0.5
14.2P1
4.2P0.5
?PART NUMBERING SYSTEM
Downsized
Longer life
Higher ripple
SMM
SMH
Frequency(Hz)
160 to 250Vdc
315 to 450Vdc
50
0.81
0.77
120
1.00
1.00
300
1.17
1.16
1k
1.32
1.30
10k
1.45
1.41
50k
1.50
1.43
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Mul ti pli ers
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 330MF:331, 3,300MF:332)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161, 315V:3B1, 450V:451)
Series code
Category
E SMM A A A V S N A A A A A A SM
13426789105121311 16 17 181514
Please refer to "A guide to global code (snap-in type)"
No plastic disk is the standard design
The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5C rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
(1/4)