RP15-2412SFW/P-HC - RECOM Power

Features

Regulated

Converters

• 4:1 Wide Input Voltage Range

• 1.6kVDC Isolation

• UL Certiﬁed

• Efﬁciency up to 88%

• Six-Sided Continuous Shield

• No Minimum Load Required

PD-1

REV.: 1/2016www.recom-power.com

DC/DC Converter

Description

The RP15-FW series wide range input DC/DC converters are certiﬁed to UL 60950-1 and to cUL 60950-

1. This makes them ideal for all telecom and industrial applications where approved safety standards

are required. The industry standard 2” x 1” package meets military standards for thermal shock and

vibration tolerance.

E196683

15 Watt

2“ x 1“

Single & Dual

Output

RP15-FW

Selection Guide

Part Number Input Output Output Input(1) Efﬁciency(1) Max. Capacitive

Voltage Range Voltage Current Current typ. Load(2)

(VDC) (VDC) (mA) (mA) (%) (µF)

RP15-243.3SFW(3,4) 9-36 3.3 4500 719 86 14700

RP15-2405SFW(3,4) 9-36 5 3000 718 87 7200

RP15-2412SFW(3,4) 9-36 12 1250 718 87 1250

RP15-2415SFW(3,4) 9-36 15 1000 718 87 800

RP15-483.3SFW(3,4) 18-75 3.3 4500 360 86 14700

RP15-4805SFW(3,4) 18-75 5 3000 355 88 7200

RP15-4812SFW(3,4) 18-75 12 1250 360 87 1250

RP15-4815SFW(3,4) 18-75 15 1000 360 87 800

RP15-2405DFW(3,4) 9-36 ±5 ±1500 718 87 ±3600

RP15-2412DFW(3,4) 9-36 ±12 ±625 710 88 ±625

RP15-2415DFW(3,4) 9-36 ±15 ±500 710 88 ±400

RP15-4805DFW(3,4) 18-75 ±5 ±1500 355 88 ±3600

RP15-4812DFW(3,4) 18-75 ±12 ±625 355 88 ±625

RP15-4815DFW(3,4) 18-75 ±15 ±500 355 88 ±400

UL60950-1 Certiﬁed

Ordering Examples

RP15-2405SFW/P = 24V 4:1 Input, 5V Output, Positive Logic CTRL pin ﬁtted

RP15-4805DFW-HC = 48V 4:1Input, ±5V Output, No CTRL pin, Heat-sink ﬁtted

Input Voltage

Output Voltage

Single or Dual

RP15-__ __ _FW/_ _

Package(4)

Control Logic(3)

Model Numbering

Notes:

Note3: Standard part is without sufﬁxes and CTRL pin isn’t ﬁtted

add sufﬁx “P” for CTRL function with positive logic (1=ON, 0=OFF)

add sufﬁx “N” for CTRL function with negative logic (0=ON, 1=OFF)

Note4: add sufﬁx -HC for premounted Heat-sink and clips

Notes:

Note1: Maximum value at nominal input voltage and full load.

Note2: Test by minimum Vin and constant resistor load.

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range nom. Vin = 24V

nom. Vin = 48V

9VDC

18VDC

24VDC

48VDC

36VDC

75VDC

Under Voltage Lockout (UVLO)

Vin = 24V DC-DC ON

DC-DC OFF 7.5VDC

9VDC

Vin = 48V DC-DC ON

DC-DC OFF 15VDC

18VDC

Input Filter Pi-type

Input Reﬂected Ripple Current nominal Vin and full load 20mAp-p

Input Surge Voltage Vin = 24V, 100ms max.

Vin = 48V, 100ms max.

50VDC

100VDC

Start-up time Power up 20ms

Operating Frequency Range 360kHz 400kHz 440kHz

Minimum Load full load 0%

Ripple and Noise 20MHz bandwidth

with a 0.1µF/50V MLCC

Single: 3.3Vout, 5Vout 50mVp-p

Single: 12Vout, 15Vout 75mVp-p

Dual: all 75mVp-p

Remote ON/OFF(5)

Positive Logic DC-DC ON

DC-DC OFF

Open or 3.0V < Vr < 12V

Short or 0V < Vr <1.2V

Negative Logic DC-DC ON

DC-DC OFF

Short or 0V < Vr <1.2V

Open or 3.0V < Vr < 12V

Input current of Remote pin (CTRL) DC-DC OFF 2.5mA

DC-DC ON -0.5mA +0.5mA

continued on next page

PD-2 REV.: 1/2016 www.recom-power.com

DC/DC Converter

RP15-FW

Series

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

Notes:

Note5: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced

to -Vin pin. If no sufﬁx is speciﬁed, the control pin will be omitted.

Efﬁciency vs. Output Current Efﬁciency vs. Input Voltage

Efficiency [%]

Input Voltage [VDC]

15 18 24 30 3612 21 27 33

9Vin

24Vin

36Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

RP15-2405SFW

DC/DC Converter

PROTECTIONS

Parameter Condition Value

Short Circuit Protection (SCP) continuous, automatic recovery

Over Voltage Protection (OVP) Zener Diode Clamp

3.3Vout

5Vout

12Vout

15Vout

3.9VDC

6.2VDC

15VDC

18VDC

Over Load Protection (OLP) % of Iout rated 150% typ.

Isolation Voltage I/P to O/P

I/P (O/P) to case

1.6kVDC/1 minute

Isolation Resistance 1GΩ min.

Isolation Capacitance 1500pF max.

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

REGULATIONS

Parameter

Condition

Value

Output Voltage Accuracy full load and nominal Vin ±1%

Line Voltage Regulation

low line, high line at full

load

Single

Dual

±0.2%

±0.5%

Load Voltage Regulation no load to full load Single

Dual

±0.5%

±1%

Cross Regulation asymmetrical 25%<>100% load ±5%

Transient Response recovery time 25% load step change 250µs typ.

RP15-FW

Series

PD-3

REV.: 1/2016www.recom-power.com

Efﬁciency vs. Output Current Efﬁciency vs. Input Voltage

Efficiency [%]

Input Voltage [VDC]

30 36 48 60 7524 42 54 66

18Vin

48Vin

75Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

RP15-4805SFW

Notes:

Note6: This power module is not internally fused. An input line fuse must always be used.

PD-4 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP15-FW

Series

SAFETY AND CERTIFICATIONS

Certiﬁcate Type (Safety) Report / File Number Standard

UL General Safety E196683 UL60950-1 1st Ed.: 2003

C22.2 No. 60950 1st. Ed.: 2003

EMC Compliance Condition Standard / Criterion

EMI Standard (9) with external ﬁlter EN55022, Class A or B

ESD

Radiated Immunity

Fast Transient(10)

Surge(10)

Conducted Immunity

Air ±8kV and Contact ±6kC

10 V/m

±2kV

±1kV

10 Vr.m.s

EN61000-4-2, Criteria B

EN61000-4-3, Criteria A

EN61000-4-4, Criteria B

EN61000-4-5, Criteria A

EN61000-4-6, Criteria A

continued on next page

ENVIRONMENTAL

Parameter Condition

Value

Operating Temperature Range without derating

with derating

-40°C to +76°C

-40°C to +105°C

Maximum Case Temperature +105°C

Temperature Coefﬁcient ±0.02%/°C max.

Thermal Impedance Natural convection (20LFM)

Natural convection (20LFM) with Heat-sink

12°C/Watt

10°C/Watt

Operating Humidity 5% - 95% RH

Thermal Shock MIL-STD-810F

Vibration MIL-STD-810F

MTBF MIL-HDBK-217F, Full Load

Bellcore TR-NWT-000332(7)

2430 x 10³ hours

2350 x 103 hours

-40 60 80

105

12040

200-20

100

Ambient Temperature [°C]

Output Power [%]

-40 60 85

80 100 120

105

200-20

100

Ambient Temperature [°C]

Output Power [%]

Derating Graph(8)

Notes:

Note7: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground ﬁxed and controlled environment).

Note8: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-

number not shown here please contact our technical support service at techsupportAT@recom-power.com.

RP15-4805SFW RP15-4805SFW with Heat-sink

Notes:

Note9: The standard modules meet EMI Class A or Class B with external components, see ﬁlter suggestions below.

Note10: An external input ﬁlter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The ﬁlter capacitor Recom

suggests: Nippon chemi-con KY series, 220µF/100V.

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP15-FW

Series

PD-5

REV.: 1/2016www.recom-power.com

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

Input

Fuse

+VIN

+VOUT

-VOUT

-VIN

LOAD

Fuse

+VIN

+VOUT

COM

-VOUT

-VIN

LOADLOAD

EMI Filtering Class A

EMI Filtering Class B

MODEL C1 C2 C3

RP15-24xxS_DFW N/A 1000pF/2kV

1206 MLCC

1000pF/2kV

1206 MLCC

RP15-48xxS_DFW 1µF/100V

1210 MLCC

1000pF/2kV

1206 MLCC

1000pF/2kV

1206 MLCC

MODEL C1 C2 C3/C4 L1

RP15-24xxS_DFW 2.2µF/50V

1812 MLCC N/A 1000pF/2kV

1206 MLCC

CMC: 450µH

ref.: WE 7448227005

ref.: CMC-05

RP15-48xxS_DFW 2.2µF/50V

1812 MLCC

2.2µF/50V

1812 MLCC

1000pF/2kV

1206 MLCC

CMC: 325µH

ref.: WE 744290321

ref.: CMC-06

DIMENSIONS and PHYSICAL CHARACTERISTICS

Parameter Type Value

Material

Case

Base

Potting

Nickel coated copper

FR4 PCB

Epoxy (UL94-V0)

Package Dimensions (LxWxH) without Heat-sink

with Heat-sink

50.8 x 25.4 x 10.2mm

56.8 x 25.4 x 16.8mm

Package Weight without Heat-sink

with Heat-sink

27g

37.89g

continued on next page

PD-6 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP15-FW

Series

Dimension Drawing (mm)

Dimension Drawing (mm) with Heat-sink

Bottom View

10.2

50.8

20.3015.20

25.40

5.60

5.10

2.50

5.08

10.1610.16

12.70

ø1.0

10.2

50.8

20.30

56.80

15.20

25.4

5.60

5.10

2.50

ø1.0

Top View

Heat-sink

50.00

24.20

1.40 1.30

1.95 1.30

5.85

16.8

Pin Connections

Pin # Single Dual

1 +Vin +Vin

2 -Vin -Vin

3 +Vout +Vout

4 No Pin Com

5 -Vout -Vout

6* CTRL* CTRL*

* Optional. See Note 5

Pin Pitch Tolerance ±0.25 mm

Pin Dimension Tolerance ±0.1mm

Tolerance: X.X ±0.5mm

X.XX ±0.25mm

PACKAGING INFORMATION

Parameter Type Value

Packaging Quantity with derating

without derating

Tube

Tray

9 pcs.

20 pcs.

Storage Temperature Range -55°C to +125°C

Storage Humidity 5% - 95% RH

The product information and speciﬁcations are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written

consent. A safety-critical application is deﬁned as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inﬂict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its afﬁliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP15-FW

Series

PD-7

REV.: 1/2016www.recom-power.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

RECOM:

RP15-2405DFW RP15-2405DFW/N RP15-2405DFW/N-HC RP15-2405DFW/P-HC RP15-2405DFW-HC RP15-

2405SFW RP15-2405SFW/N RP15-2405SFW/N-HC RP15-2405SFW/P-HC RP15-2405SFW-HC RP15-2412DFW

RP15-2412DFW/N RP15-2412DFW/N-HC RP15-2412DFW/P-HC RP15-2412DFW-HC RP15-2412SFW RP15-

2412SFW/N RP15-2412SFW/N-HC RP15-2412SFW/P-HC RP15-2412SFW-HC RP15-2415DFW RP15-2415DFW/N

RP15-2415DFW/N-HC RP15-2415DFW/P-HC RP15-2415DFW-HC RP15-2415SFW RP15-2415SFW/N RP15-

2415SFW/N-HC RP15-2415SFW/P-HC RP15-2415SFW-HC RP15-243.3SFW RP15-243.3SFW/N RP15-

243.3SFW/N-HC RP15-243.3SFW/P-HC RP15-243.3SFW-HC RP15-4805DFW RP15-4805DFW/N RP15-

4805DFW/N-HC RP15-4805DFW/P-HC RP15-4805DFW-HC RP15-4805SFW RP15-4805SFW/N RP15-4805SFW/N-

HC RP15-4805SFW/P-HC RP15-4805SFW-HC RP15-4812DFW RP15-4812DFW/N RP15-4812DFW/N-HC RP15-

4812DFW/P-HC RP15-4812DFW-HC RP15-4812SFW RP15-4812SFW/N RP15-4812SFW/N-HC RP15-4812SFW/P-

HC RP15-4812SFW-HC RP15-4815DFW RP15-4815DFW/N RP15-4815DFW/N-HC RP15-4815DFW/P-HC RP15-

4815DFW-HC RP15-4815SFW RP15-4815SFW/N RP15-4815SFW/N-HC RP15-4815SFW/P-HC RP15-4815SFW-

HC RP15-483.3SFW RP15-483.3SFW/N RP15-483.3SFW/N-HC RP15-483.3SFW/P-HC RP15-483.3SFW-HC