Features Regulated Converters * * * * * * 4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield No Minimum Load Required DC/DC Converter RP15-FW Description 15 Watt 3 2" x 1" Single & Dual Output 3Y The RP15-FW series wide range input DC/DC converters are certified to UL 60950-1 and to cUL 609501. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2" x 1" package meets military standards for thermal shock and vibration tolerance. wa EAR rranty Selection Guide Part Number RP15-243.3SFW(3,4) RP15-2405SFW(3,4) RP15-2412SFW(3,4) RP15-2415SFW(3,4) RP15-483.3SFW(3,4) RP15-4805SFW(3,4) RP15-4812SFW(3,4) RP15-4815SFW(3,4) RP15-2405DFW(3,4) RP15-2412DFW(3,4) RP15-2415DFW(3,4) RP15-4805DFW(3,4) RP15-4812DFW(3,4) RP15-4815DFW(3,4) Input Voltage Range (VDC) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 9-36 9-36 9-36 18-75 18-75 18-75 Output Voltage (VDC) 3.3 5 12 15 3.3 5 12 15 5 12 15 5 12 15 Output Current (mA) 4500 3000 1250 1000 4500 3000 1250 1000 1500 625 500 1500 625 500 Input(1) Efficiency(1) Current typ. (mA) (%) 719 86 718 87 718 87 718 87 360 86 355 88 360 87 360 87 718 87 710 88 710 88 355 88 355 88 355 88 Max. Capacitive Load(2) (F) 14700 7200 1250 800 14700 7200 1250 800 3600 625 400 3600 625 400 Notes: Note1: Maximum value at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load. Model Numbering E196683 RP15-__ __ _FW/_ _ Input Voltage Output Voltage UL60950-1 Certified Package(4) Control Logic(3) Single or Dual Ordering Examples RP15-2405SFW/P = 24V 4:1 Input, 5V Output, Positive Logic CTRL pin fitted RP15-4805DFW-HC = 48V 4:1Input, 5V Output, No CTRL pin, Heat-sink fitted Notes: Note3: Note4: Standard part is without suffixes and CTRL pin isn't fitted add suffix "P" for CTRL function with positive logic (1=ON, 0=OFF) add suffix "N" for CTRL function with negative logic (0=ON, 1=OFF) add suffix -HC for premounted Heat-sink and clips www.recom-power.com REV.: 1/2016 PD-1 RP15-FW DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted BASIC CHARACTERISTICS Parameter Input Voltage Range Condition Min. Typ. Max. nom. Vin = 24V nom. Vin = 48V 9VDC 18VDC 24VDC 48VDC 36VDC 75VDC Vin = 24V DC-DC ON DC-DC OFF 7.5VDC Vin = 48V DC-DC ON DC-DC OFF 15VDC Under Voltage Lockout (UVLO) 9VDC 18VDC Input Filter Pi-type Input Reflected Ripple Current nominal Vin and full load Input Surge Voltage Vin = 24V, 100ms max. Vin = 48V, 100ms max. Start-up time 20mAp-p 50VDC 100VDC Power up 20ms Operating Frequency Range 360kHz Minimum Load full load 400kHz 0% Single: 3.3Vout, 5Vout 50mVp-p 20MHz bandwidth Single: 12Vout, 15Vout with a 0.1F/50V MLCC Dual: all Ripple and Noise 440kHz 75mVp-p 75mVp-p Positive Logic DC-DC ON DC-DC OFF Open or 3.0V < Vr < 12V Short or 0V < Vr <1.2V Negative Logic DC-DC ON DC-DC OFF Short or 0V < Vr <1.2V Open or 3.0V < Vr < 12V Remote ON/OFF(5) DC-DC OFF Input current of Remote pin (CTRL) 2.5mA DC-DC ON -0.5mA +0.5mA Notes: Note5: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin. If no suffix is specified, the control pin will be omitted. RP15-2405SFW 95 90 85 80 75 70 65 60 55 50 45 40 35 Efficiency vs. Input Voltage 95 90 Efficiency [%] Efficiency [%] Efficiency vs. Output Current 9Vin 24Vin 36Vin 10 20 30 40 50 60 70 80 90 85 80 75 70 65 60 100 9 12 15 18 21 24 27 30 33 36 Input Voltage [VDC] Output Current [%] continued on next page PD-2 REV.: 1/2016 www.recom-power.com RP15-FW DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted RP15-4805SFW Efficiency vs. Output Current Efficiency vs. Input Voltage 95 92 90 90 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 18Vin 48Vin 75Vin 50 45 40 10 20 30 40 50 60 70 80 90 88 86 84 82 80 100 18 24 30 36 42 48 54 60 66 75 Input Voltage [VDC] Output Current [%] REGULATIONS Parameter Output Voltage Accuracy Line Voltage Regulation Load Voltage Regulation Cross Regulation Transient Response recovery time Condition Value full load and nominal Vin 1% low line, high line at full Single load Dual 0.2% 0.5% Single Dual 0.5% 1% no load to full load asymmetrical 25%<>100% load 25% load step change 5% 250s typ. PROTECTIONS Parameter Condition Short Circuit Protection (SCP) Over Voltage Protection (OVP) Value continuous, automatic recovery 3.3Vout 5Vout Zener Diode Clamp 12Vout 15Vout 3.9VDC 6.2VDC 15VDC 18VDC Over Load Protection (OLP) % of Iout rated 150% typ. Isolation Voltage I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.6kVDC/1 minute 1G min. Isolation Resistance Isolation Capacitance 1500pF max. Notes: Note6: This power module is not internally fused. An input line fuse must always be used. www.recom-power.com REV.: 1/2016 PD-3 RP15-FW DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted ENVIRONMENTAL Parameter Condition Value without derating with derating Operating Temperature Range -40C to +76C -40C to +105C Maximum Case Temperature +105C Temperature Coefficient 0.02%/C max. Natural convection (20LFM) Natural convection (20LFM) with Heat-sink Thermal Impedance 12C/Watt 10C/Watt Operating Humidity 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MIL-HDBK-217F, Full Load Bellcore TR-NWT-000332(7) MTBF 2430 x 10 hours 2350 x 103 hours Derating Graph(8) RP15-4805SFW with Heat-sink 100 100 80 80 Output Power [%] Output Power [%] RP15-4805SFW 60 40 20 0 -40 -20 0 20 40 60 80 Ambient Temperature [C] 105 60 40 20 0 -40 120 -20 0 20 40 60 80 100 120 85 105 Ambient Temperature [C] Notes: Note7: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). Note8: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com. SAFETY AND CERTIFICATIONS Certificate Type (Safety) UL General Safety EMC Compliance EMI Standard (9) ESD Radiated Immunity Fast Transient(10) Surge(10) Conducted Immunity Report / File Number E196683 Standard UL60950-1 1st Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 Condition Standard / Criterion with external filter EN55022, Class A or B Air 8kV and Contact 6kC 10 V/m 2kV 1kV 10 Vr.m.s EN61000-4-2, Criteria B EN61000-4-3, Criteria A EN61000-4-4, Criteria B EN61000-4-5, Criteria A EN61000-4-6, Criteria A Notes: Note9: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below. Note10: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: Nippon chemi-con KY series, 220F/100V. continued on next page PD-4 REV.: 1/2016 www.recom-power.com C2 Fuse RP15-FW +VOUT +VIN Input DC/DC Converter LOAD DC C1 Series DC -VOUT Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted -VIN C3 EMI Filtering Class A C2 Fuse DC DC C1 LOAD C1 +VOUT +VIN Input LOAD +VOUT +VIN Input COM DC LOAD Fuse C2 DC -VOUT -VOUT -VIN -VIN C3 MODEL N/A C1 1000pF/2kV 1206 MLCC C2 1000pF/2kV 1206 MLCC 1F/100V 1210 MLCC 1000pF/2kV 1206 MLCC 1000pF/2kV-VIN 1206 MLCC RP15-24xxS_DFW +VOUT +VIN RP15-48xxS_DFWDC C1 DC -VOUT LOAD COM DC EMI Filtering Class B DC -VOUT C4 -VIN C3 C3 C3 L1 Fuse +VOUT +VIN Input DC C2 DC C1 LOAD C1 +VOUT +VIN Input C2 COM DC DC -VOUT -VOUT -VIN -VIN C4 C4 C3 C1 C2 C3/C4 L1 RP15-24xxS_DFW +VIN 2.2F/50V +V 1812 MLCC N/A 1000pF/2kV 1206 MLCC CMC: 450H ref.: WE 7448227005 ref.: CMC-05 2.2F/50V 1812 MLCC 1000pF/2kV 1206 MLCC CMC: 325H ref.: WE 744290321 ref.: CMC-06 OUT DC C1 C2 COM 2.2F/50V RP15-48xxS_DFW DC 1812 MLCC -V OUT LOAD Input MODEL LOAD L1 Fuse LOAD L1 Fuse LOAD Input C3 C2 +VOUT +VIN C2 LOAD Fuse Input C1 C3 L1 Fuse LOAD C3 -VIN C4 DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper FR4 PCB Epoxy (UL94-V0) Package Dimensions (LxWxH) Package Weight without Heat-sink with Heat-sink 50.8 x 25.4 x 10.2mm 56.8 x 25.4 x 16.8mm without Heat-sink with Heat-sink 27g 37.89g continued on next page www.recom-power.com REV.: 1/2016 PD-5 RP15-FW DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted Dimension Drawing (mm) 50.8 5.60 10.2 25.40 o1.0 15.20 2.50 5.10 20.30 Pin Connections 10.16 5.08 3 1 Bottom View Pin # 4 10.16 12.70 2 1 6 5 Single +Vin Dual +Vin 2 -Vin 3 +Vout +Vout -Vin 4 No Pin Com 5 -Vout -Vout 6* CTRL* CTRL* * Optional. See Note 5 Pin Pitch Tolerance 0.25 mm Pin Dimension Tolerance 0.1mm Tolerance: X.X 0.5mm X.XX 0.25mm Dimension Drawing (mm) with Heat-sink 24.20 1.30 50.00 1.95 Top View Heat-sink 1.40 1.30 25.4 10.2 16.8 5.85 50.8 o1.0 20.30 5.60 15.20 56.80 PD-6 REV.: 1/2016 2.50 5.10 www.recom-power.com RP15-FW DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted PACKAGING INFORMATION Parameter Packaging Quantity Type with derating Tube without derating Tray Storage Temperature Range Value 9 pcs. 20 pcs. -55C to +125C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2016 PD-7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: RECOM: RP15-2405DFW RP15-2405DFW/N RP15-2405DFW/N-HC RP15-2405DFW/P-HC RP15-2405DFW-HC RP152405SFW RP15-2405SFW/N RP15-2405SFW/N-HC RP15-2405SFW/P-HC RP15-2405SFW-HC RP15-2412DFW RP15-2412DFW/N RP15-2412DFW/N-HC RP15-2412DFW/P-HC RP15-2412DFW-HC RP15-2412SFW RP152412SFW/N RP15-2412SFW/N-HC RP15-2412SFW/P-HC RP15-2412SFW-HC RP15-2415DFW RP15-2415DFW/N RP15-2415DFW/N-HC RP15-2415DFW/P-HC RP15-2415DFW-HC RP15-2415SFW RP15-2415SFW/N RP152415SFW/N-HC RP15-2415SFW/P-HC RP15-2415SFW-HC RP15-243.3SFW RP15-243.3SFW/N RP15243.3SFW/N-HC RP15-243.3SFW/P-HC RP15-243.3SFW-HC RP15-4805DFW RP15-4805DFW/N RP154805DFW/N-HC RP15-4805DFW/P-HC RP15-4805DFW-HC RP15-4805SFW RP15-4805SFW/N RP15-4805SFW/NHC RP15-4805SFW/P-HC RP15-4805SFW-HC RP15-4812DFW RP15-4812DFW/N RP15-4812DFW/N-HC RP154812DFW/P-HC RP15-4812DFW-HC RP15-4812SFW RP15-4812SFW/N RP15-4812SFW/N-HC RP15-4812SFW/PHC RP15-4812SFW-HC RP15-4815DFW RP15-4815DFW/N RP15-4815DFW/N-HC RP15-4815DFW/P-HC RP154815DFW-HC RP15-4815SFW RP15-4815SFW/N RP15-4815SFW/N-HC RP15-4815SFW/P-HC RP15-4815SFWHC RP15-483.3SFW RP15-483.3SFW/N RP15-483.3SFW/N-HC RP15-483.3SFW/P-HC RP15-483.3SFW-HC