14536-SZ6B-500-0HC - 3M - Product.Network

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering inform at io n call

800-225-5373

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC

Physical

Electrical

Environmental

Channel Link is a trademark of National Semiconductor.

Connector Contact Plating

Wiping Area: 30 μ″ [ 0.76 μm ] Min. Gold

Thumbscrew Shell Color: Beige

Thumbscrew Shell Material: Acrylonitrile Butadiene Styrene (ABS)

Metal shell plating: Nickel

Metal shell material: Aluminum, .050" [1.27 mm] Thick

Cable

Color: Beige

Jacket Material: Polyvinyl Chloride (PVC)

Flammability: AWM VW-1

Voltage Rating: 30 V

Current Rating: 1 A

Insulation Resistance: > 1 × 108Ω at @100 VDC

Withstanding Voltage: 350 VRMS fo r 1 minute

Individually Shielded Twisted Pairs

Characteristic Impedance: 100 ± 10Ω

Conductor Size: 28 AWG Stranded

Propogation Velocity: 1.25 ns/ft [4.1 ns/m ]

Temperature Rating: -20°C to +75°C

TS-2102-B

Sheet 1 of 4

• Supports LVDS Channel Link™ signaling

• 10 shielded pairs (100 ohm) +2 drains for

high bandwidth applicatio ns

• 1 USB pair & 4 singles

• High density 36 position MDR with rugged

ribbon type contact

• Metal junction shell with Quick Release

Latches

• EMI over-molded junction shell with rugged

thumbscrew retention

• See Regulatory Information Appendix (RIA)

for chemical compliance information

Date Modified: October 9, 2007

UL File No.: E86982

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

10336

Cable

(S hiel ded Tw isted Pairs)

36 Position High Density

Mini D Ribbon (MDR)

Ma le Plug

36 Position High Density

Mini D Ribbon (MDR)

Male Pl ug

LENGTH

2X Squeeze

Release Latches

2X Squeez e

Rel ease Latche s

32.0

1.3 32.0

1.3

MDR 36 Position Plug

Both Ends

1234567 1213111089

20 21 22 23 24

17 181615

25 26 27 28 29

19 30 31 32 33 34 35 36

39.8

1.6

12.7

0.5

Metal Latching Shell

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC

Ordering Information

14X36-SZ6B-XXX-0HC

Length:

100 = 1.0 meters

200 = 2.0 meters

500 = 5.0 meters TS-2102-B

Sheet 2 of 4

Backshell Options:

T = Over-molded 4-40 thumbscrew

1 = Metal Latching Shell

Generic End Detail

MDR 36 Position Plug

( Both Ends )

[Inch]

Tolerance Unless Noted

[ ] Dimensions for

Reference only

± .10

± .1

0.00

0.0

Assembly Length Tolerance

Cable Length:

0.5 to 1.5 meters -0 + .05 meters

2 to 10 meters -0 +3% of length

(RIA E1 & C1 apply)

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC

Generic End Detail

MDR 36 Position Plug

( Both Ends )

Note: 1. Use 3341-31 jacksocket for mounting receptacle to panel. TS-2102-B

Sheet 3 of 4

[Inch]

Tolerance Unless Noted

[ ] Dimensions for

Reference only

± .10

± .1

0.00

0.0

123456

1920

7891011

2122

2324

2526

2728

2930

3132

3334

3536

14.5

0.6

45.7

1.8

37.6

1.5

Assembly Length Tolerance

Cable Length:

0.5 to 1.5 meters -0 + .05 meters

2 to 10 meters -0 +3% of length

2X Thumbscrew

#4-40 thread 2X Thumbscrew

#4-40 thread

36 Posit i on

High Density

Mini D Ribbon

(MDR) Male Plug

36 Posit i o n

High Density

Mini D Ribbon

(MDR) Male Plug

Cable

(S ee pinout for

cable construction)

(See ordering information)

45.7

1.8 LENGTH 45.7

1.8

Over-Molded #4-40 T humbscrew

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC

MDR 36 Position Pinout (F36-02)

P1 P2

Pair Signal Position Position Signal Pair Pair Signal Position Position Signal Pair

1 A0- 1 13 USB Pwr W6 1 A0- 1 13 USB Pwr W6

1 A0+ 19 31 Shld Gnd Drain 1 A0+ 19 31 Shld Gnd Drain

2 A1- 2 14 A4- 6 2 A1- 2 14 A4- 6

2 A1+ 20 32 A4+ 6 2 A1+ 20 32 A4+ 6

3 A2- 3 15 A5- 7 3 A2- 3 15 A5- 7

3 A2+ 21 33 A5+ 7 3 A2+ 21 33 A5+ 7

4 CLK1- 4 16 A6- 8 4 CLK1- 4 16 A6- 8

4 CLK1+ 22 34 A6+ 8 4 CLK1+ 22 34 A6+ 8

5 A3- 5 17 A7- 9 5 A3- 5 17 A7- 9

5 A3+ 23 35 A7+ 9 5 A3+ 23 35 A7+ 9

Drain Shld Gnd 6 18 CLK2- 10 Drain Shld Gnd 6 18 CLK2- 10

N/C 24 36 CLK2+ 10 N/C 24 36 CLK2+ 10

N/C7 N/C7

N/C 25 N/C 25

N/C8 N/C8

N/C 26 N/C 26

N/C9 N/C9

W1 DDC Gnd 27 W1 DDC Gnd 27

W2 DDC/SCL 10 W2 DDC/SCL 10

W3 DDC/SDA 28 W3 DDC/SDA 28

W4 DDC Pwr 11 W4 DDC Pwr 11

W5 USB Gnd 29 W5 USB Gnd 29

SP1 USB+ 12 SP1 USB+ 12

SP1 USB- 30 SP2 USB- 30

Notes:

1. All pairs are individually shielded with aluminum foil.

2. Pair shields are wrapped Aluminum out and in contact with six internal drains (logic ground).

3. Outer braid and foil (chassis ground) is isolated from inner dra i ns (l ogic ground).

TS-2102-B

Sheet 4 of 4

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/717/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-c

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217B-c

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the

warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

Please recycle. Printed in USA.

RIA-2217B-c

3M Electronics

Interconnect Products

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3m.com/interconnects 3M is a trademark of 3M Company.

Appendix C3: China RoHS