Thick Film Wraparound Extended Power Surface Mount Chip Resistors for Epoxy and Solder Mount The ims Super (S) RCX series of thick film wraparound surface mount chip resistors is ideal for applications requiring epoxy or solder die attaching methods and extended power handling in a small package. Thick film technology provides a stable resistor at a very affordable price. Special processing allows for twice the power handling capacity of other resistors in the same size package. The "X" designation in each series is a variable that allows for specifying the termination metalization. Please see the ordering information on the back for instructions. The wraparound terminations can be platinum silver or platinum silver with solder coating. These chip resistors have the following features: * Twice the power handling capability of other resistors in the same form factor * High stability thick film resistor element * 96% Al2O3 substrate material * Platinum silver(PtAg) or platinum silver with 62/36/2 solder coating * Tolerances to 1% * Passivated resistor element is standard * Available in bulk, tape and reel, and waffle pack Features Twice the power handling of similar resistors Termination style Full wraparound Thick film technology Resistance values RC3-0402S RCC-0402S RC3,C-0603S RC3,C-0805S RC3,C-1206S RC3,C-2010S Ideal for epoxy attachment. Solder coating also available Resistance values from 10 ohm to 1 Megohm 10 - 24 Tolerances to 1 % TCR 100 ppm/oC typical 25 - 50K 50K - 1 M 50 Schoolhouse Lane Portsmouth, RI 02871 Tel (401) 683-9700 Fax (401) 683-5571 e-mail: ims@ims-resistors.com http://www.ims-resistors.com RC3,C-2512S Full Wraparound Terminations 1% 2% 5% 10% 1% 2% 5% 10% 1% 2% 5% 10% Consult factory for additional values and tolerances. Dimensions Part Number RCX-0402S RCX-0603S RCX-0805S RCX-1206S RCX-2010S RCX-2512S Length 0.040 .005 0.060 .005 0.080 .005 0.126 .008 0.197 .008 0.248 .008 Width Height 0. 020 .005 0.020 max. 0.030 .005 0.020 max. 0.050 .005 0.020 max. 0.063 .006 0.020 max. 0.106 .008 0.028 max. 0.126 .010 0.028 max. Terminal 0.008 .004 0.014 .006 0.018 .008 0.020 .010 0.020 .012 0.026 .010 W L H T *SG (single top contact with wraparound groundplane) terminations available on all sizes as special order. Contact factory for details. Specifications Operating temperature Maximum Working Voltage RCX-0402S to RCX-0603S RCX-0805S RCX-1206S to RCX 2512S Rated power (70C)* RCX-0402S RCX-0603S RCX-0805S RCX-1206S RCX-2010S RCX-2512S Resistance tolerances RCX-0402S RCX-0603S to RCX-2512S -55C to +150C For Higher Power Please see our N-Series Resistors 50 VDC 150 VDC 200 VDC 160 mW 200 mW 350 mW 500 mW 1W 2W 2%, 5%, 10% 1% , 2% , 5% , 10% *Note 1: Power Ratings based upon free air testing. Note 2: Power handling can be extended further using proper thermal management techniques. Ordering Information Example: 100 , 5%, 0402, PtAg terminations, 160mW resistor RC3 - 0402S-1000 J RC 3 PtAg C PtAg with 62/36/2 solder coating Form factor 0402S 0805S 2010S 0603S 1206S 2512S Super RCX ver.1 05/03 Tolerance F - 1% G - 2% J - 5% K - 10% Resistance value The first three digits are significant values. The fourth is the number of zeroes following. The R indicates a decimal point when resistance value is less than 100 . Specifications subject to change 50 Schoolhouse Lane Portsmouth, RI 02871 Tel (401) 683-9700 Fax (401) 683-5571 e-mail: ims@ims-resistors.com http://www.ims-resistors.com