PG2417T6M Data Sheet GaAs Integrated Circuit SP6T Switch for NFC Application R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 DESCRIPTION The PG2417T6M is a GaAs MMIC for SP6T (Single Pole Six Throw) switch for NFC (Near Field Communication) application. This device is housed in a 12-pin plastic TSQFN (Thin Small Quad Flat Non-leaded) (T6M) package and is suitable for high-density surface mounting. FEATURES 1, 2, 4, 8 pF capacitors on RF path are built in PKG. Switch control voltage : Vcont (H) = 2.85 V TYP. : Vcont (L) = 0 V TYP. Low insertion loss : Lins = 0.5 dB TYP. @ f = 13.56 MHz High isolation : ISL = 50 dB TYP. @ f = 13.56 MHz Handling power : Pin (0.1 dB) = +32.0 dBm TYP. @ f = 13.56 MHz High-density surface mounting : 12-pin plastic TSQFN (T6M) package (2.0 2.0 0.37 mm) APPLICATIONS NFC Application (FeliCaTM etc.) ORDERING INFORMATION Part Number PG2417T6M-E2 Order Number Package PG2417T6M-E2-A 12-pin plastic TSQFN Marking 2417 (T6M) (Pb-Free) Supplying Form Embossed tape 8 mm wide Pin 10, 11, 12 face the perforation side of the tape Qty 3 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: PG2417T6M-A CAUTION Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 1 of 11 PG2417T6M PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Pin Name 1 2 RF1 GND 3 4 5 6 7 8 9 10 11 12 Vcont4 Vcont6 RF3 Vcont3 Vcont5 GND RF2 Vcont2 ANT Vcont1 Page 2 of 11 PG2417T6M SW TRUTH TABLE RF Path ANT-RF3 (Capacitor) OFF 1 pF 2 pF 3 pF 4 pF 5 pF 6 pF 7 pF 8 pF 9 pF 10 pF 11 pF 12 pF 13 pF 14 pF 15 pF ANT-RF1 ANT-RF2 Vcont1 Vcont2 Vcont3 Vcont4 Vcont5 Vcont6 OFF ON L H L L L L ON OFF H L L L L L ON ON H H L L L L OFF OFF OFF ON L L L H H H L L L L L L ON OFF H L H L L L ON ON H H H L L L OFF OFF OFF ON L L L H L L H H L L L L ON OFF H L L H L L ON ON H H L H L L OFF OFF OFF ON L L L H H H H H L L L L ON OFF H L H H L L ON ON H H H H L L OFF OFF OFF ON L L L H L L L L H H L L ON OFF H L L L H L ON ON H H L L H L OFF OFF OFF ON L L L H H H L L H H L L ON OFF H L H L H L ON ON H H H L H L OFF OFF OFF ON L L L H L L H H H H L L ON OFF H L L H H L ON ON H H L H H L OFF OFF OFF ON L L L H H H H H H H L L ON OFF H L H H H L ON ON H H H H H L OFF OFF OFF ON L L L H L L L L L L H H ON OFF H L L L L H ON ON H H L L L H OFF OFF OFF ON L L L H H H L L L L H H ON OFF H L H L L H ON ON H H H L L H OFF OFF OFF ON L L L H L L H H L L H H ON OFF H L L H L H ON ON H H L H L H OFF OFF OFF ON L L L H H H H H L L H H ON OFF H L H H L H ON ON H H H H L H OFF OFF OFF ON L L L H L L L L H H H H ON OFF H L L L H H ON ON H H L L H H OFF OFF OFF ON L L L H H H L L H H H H ON OFF H L H L H H ON ON H H H L H H OFF OFF OFF ON L L L H L L H H H H H H ON OFF H L L H H H ON ON H H L H H H OFF OFF OFF ON L L L H H H H H H H H H ON OFF H L H H H H ON ON H H H H H H R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 3 of 11 PG2417T6M ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Switch Control Voltage Input Power (ON Port) Operating Ambient Temperature Storage Temperature Symbol Vcont Pin TA Tstg Ratings Note 6.0 to +6.0 +35.0 45 to +85 55 to +150 Unit V dBm C C Note: Vcont (H) Vcont (L) 6.0 V RECOMMENDED OPERATING RANGE (T A = +25C, unless otherwise specified) Parameter Switch Control Voltage (H) Symbol Vcont (H) MIN. +2.4 TYP. +2.85 MAX. +3.4 Unit V Switch Control Voltage (L) Control Voltage Difference Vcont (L) Vcont (H), Vcont (L) 0.2 0.1 0 0 +0.2 +0.1 V V Note Note: VCONT(H) is a difference between the maximum and the minimum control voltage among VCONT1(H), VCONT2(H), VCONT3(H), VCONT4(H), VCONT5(H) and VCONT6(H). VCONT(L) is a difference between the maximum and the minimum control voltage among VCONT1(L), VCONT2(L), VCONT3(L), VCONT4(L), VCONT5(L) and VCONT6(L). R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 4 of 11 PG2417T6M ELECTRICAL CHARACTERISTICS (TA = 45 to +85C, f = 13.56 MHz, Vcont (H) = +2.4 to +3.4V, Vcont (L) = 0.2 to +0.2 V, ZO = 50 , DC blocking capacitors = 10 000 pF, unless otherwise specified) Parameter Insertion Loss Isolation Capacitance Value Symbol Lins1 Lins2 Lins3 Lins4 Test Conditions ANT-RF1, Vcont1 = H, Pin = +20 dBm ANT-RF2, Vcont2 = H, Pin = +20 dBm ANT-RF3, Vcont3 = H, Pin = +20 dBm ANT-RF3, Vcont4 = H, Pin = +20 dBm MIN. 36.0 31.5 TYP. 0.5 0.5 38.0 33.5 MAX. 0.9 0.9 40.0 35.5 Unit dB dB dB dB Lins5 Lins6 ISL1 ANT-RF3, Vcont5 = H, Pin = +20 dBm ANT-RF3, Vcont6 = H, Pin = +20 dBm ANT-RF1, Vcont2 = H, Pin = +20 dBm 26.0 20.5 32.0 28.0 22.5 50.0 30.0 24.5 dB dB dB ISL2 Cap 1 Cap 2 ANT-RF2, Vcont1 = H, Pin = +20 dBm ANT-RF3, Vcont3 = H ANT-RF3, Vcont4 = H 32.0 50.0 1.0 2.0 dB pF pF ANT-RF3, Vcont5 = H ANT-RF3, Vcont6 = H ANT-RF1/RF2 28.0 4.0 8.0 32.0 pF pF dBm Cap 3 Cap 4 Pin (0.1 dB) 0.1 dB Loss Compression Note Input Power Switch Control Current Icont No RF input 2 30 A Switch Control Speed tSW 50% CTL to 90/10% RF 1 5 s Note: Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of the linear range. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 5 of 11 PG2417T6M EVALUATION CIRCUIT Note: C1: 10 000 pF C2: 10 000 pF The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 6 of 11 PG2417T6M TYPICAL CHARACTERISTICS (TA = +25C, f = 13.56 MHz, Vcont (H) = +2.4 to +3.4 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 10 000 pF) Remark The graph indicates nominal characteristics. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 7 of 11 PG2417T6M MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS 12-PIN PLASTIC TSQFN (T6M) (UNIT: mm) Remark The mounting pad and solder mask layouts in this document are for reference only. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 8 of 11 PG2417T6M PACKAGE DIMENSIONS 12-PIN PLASTIC TSQFN (T6M) (UNIT: mm) Remark A > 0 ( ): Reference value R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 9 of 11 PG2417T6M RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Partial Heating Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (terminal temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260 HS350 CAUTION Do not use different soldering methods together (except for partial heating). R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 10 of 11 PG2417T6M Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 11 of 11 PG2417T6M Data Sheet Revision History Rev. 1.00 Date Dec 24, 2010 Page -- Description Summary First edition issued FeliCa is the contactless IC card technology developed by Sony Corporation. FeliCa is a trademark of Sony Corporation. All trademarks and registered trademarks are the property of their respective owners. C-1