1/4
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.07 - Rev.B
High Voltage Resistance Chip Resistors
KTR Series
Features
1) Twice the rated voltage of conventional products..
2) Perfect for use in high voltage circuit. (Camera Flash circuit, etc)
3) ROHM resistors have obtained ISO9001 / ISO / TS16949 certification.
4) Corresponds to AEC-Q200. (KTR18)
Products List
Limiting Element
Voltage
(V)
Maximum
Overload
Voltage
(V)
Temperature
Coefficient
(ppm /
°C
)
Resistance
Tolerance
(%)
Operating
Temperature
Range
(
°C
)
Resistance Range SeriesPart No.
Rated Power
(70°C)
(W)
0603
0805
1206
1210
∗Design and specifications are subject to change without notice.
Carefully check the specification sheet supplied with the product before using or ordering it.
Size
(mm) (inch)
KTR03
KTR10
KTR18
KTR25
1608
2012
3216
3225
0.1 350
400
500
600 1200
1000
800
500
0.125
0.25
0.33
−55 to +155
1Ω to 10MΩ
E24
F(±5%)
J(±5%)±200
±100
1Ω to 10MΩ
F(±5%)
J(±5%)±200
±100
1Ω to 10MΩ
F(±5%)
J(±5%)±200
±100
1Ω to 10MΩ
F(±5%)
J(±5%)±200
±100
Part Number Description
KTR
(High Voltage Resistance
Chip Resistors)
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Ex.)
1Ω = 1R00 ( ±1% )
1R0 ( ±5% )
10 Ω = 10R0 ( ±1% )
100 ( ±5%
)
1M Ω = 1004 ( ±1% )
105 ( ±5%
)
03 (1608 [0603])
10 (2012 [0805])
18 (3216 [1206])
25 (3225 [1210])
D ( ±0.5% )
F ( ±1% )
J ( ±5% )
1 0 EPZ
TKR J01 0
Packaging
specifications
CodePart No.
Paper tape
(4mm Pitch)
EZP
KTR03 5,000
Paper tape
(4mm Pitch)
EZP
KTR10 5,000
Paper tape
(4mm Pitch)
EZP
KTR18 5,000
Embossed tape
(4mm Pitch)
JZP
KTR25 4,000
Part No. Packaging Specifications Code
Size
(mm [inch]) Resistance
Tolerance
Nominal Resistance
F
J
:
:
4 digits
3 digits
Resistance
tolerance
Resistance
code
Quantity
/ Reel
2/4
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.07 - Rev.B
Data Sheet
KTR Series
Chip Resistor Dimensions and Markings
<Marking method>
There are three or four digits used for the calculation number
according to IEC code and “R”is used for the decimal point.
Part No. (mm) L W t a b Marking
existence
(Unit : mm)
∗
Only with square mark
1608 1.6±0.1 0.8±0.1 0.45±0.1 0.3±0.2 0.3±0.2 No ∗
2012 2.0±0.1 1.25±0.1 0.55±0.1 0.3±0.2 Yes
3216 3.2±0.15 1.6±0.15 0.55±0.1 0.3±0.25 0.5±0.25 Yes
3225
(inch)
0603
0805
1206
1210 3.2±0.15 2.5±0.15 0.55±0.15 0.3±0.25 0.5±0.25 Yes
0.4±0.2
KTR03
KTR10
KTR18
KTR25
Land pattern Example
B
D
A
Land
C
A
KTR03
KTR10
KTR18
KTR25
1.0
1.2
2.2
2.2
B
2.0
2.6
4.0
4.0
C
0.8
1.15
1.5
2.3
D
0.5
0.7
0.9
0.9
(Unit : mm)
Part No.
Dimensions
L
a
b
W
t
L
a
b
W
t
KTR03 KTR10 / 18 / 25
103
3/4
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.07 - Rev.B
Data Sheet
KTR Series
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
KTR03 / 10 / 18 / 25
0
20
40
60
80
100
−55 0 70 100 155
AMBIENT TEMPERATURE (°C)
PERCENT RATED POWER (%)
Characteristics
Test Items Test Conditions
Resistor Type
Guaranteed Value
Endurance at 70°C
Endurance
Bend strength of
the end face plating
Resistance to solvent
± (2.0%+0.1Ω)
± (1.0%+0.05Ω)
± (3.0%+0.1Ω)
See P.1
See P.1
20°C
No remarkable abnormality on the appearance.
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Without mechanical damage such as breaks.
Compliance Standard(s) : IEC60115−8
JISC 5201−8
Measurement :
+20 / −55 / +20 / +125°C
Soldering condition : 260±5°C
Duration of immersion : 10±1s
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
70°C
Rated voltage (current)
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
155°C
Test time : 1,000h to 1,048h
23±5°C, Immersion cleaning, 5±0.5min
Solvent : 2−propanol
−
Test temp. : −55°C to +125°C 5cycle
Rosin·Ethanol : 25% (Weight)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s
Rated voltage (current) ×2.5, 2s
Maximum overload voltage
Variation of resistance
with temperature
Resistance
Overload
Solderability
Resistance to
soldering heat
Rapid change of
temperature
Damp heat, steady state
Technical data
Fit
mg/pc
Parameter Unit
Failure rate
Weight
KTR03 KTR10 KTR18 KTR25
0.5921
2.18
0.0912
5.13
0.0883
9.62
8.4509
16.47
4/4
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.07 - Rev.B
Data Sheet
KTR Series
Tape Dimensions
Paper Tape
Embossed Tape
A
0
P
1
P
0
P
2
B
0
F
W
K
E
φD
0
P0
P2P1
E
FW
T2
φD0
A0
B0
Base paper
(Bottom tape)
Components Cavity
Top tape
1.1±0.1 1.9±0.1
1.65 +0.2
−0.1 2.4 +0.2
−0.1
1.95 +0.1
−0.05 3.5 +0.15
−0.05
(Unit : mm)
WPart No. F E A0B0
8.0±0.3KTR03 3.5±0.05 1.75±0.1
8.0±0.3KTR10 3.5±0.05 1.75±0.1
8.0±0.3KTR18 3.5±0.05 1.75±0.1
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
2.0±0.05
2.0±0.05
2.0±0.05
Max 1.1
Max 1.1
Max 1.1
D0Part No. P0P1P2T2
4.0±0.1
4.0±0.1
4.0±0.1
KTR03 4.0±0.1
KTR10 4.0±0.1
KTR18 4.0±0.1
3.0±0.1 3.5±0.1
(Unit : mm)
WPart No. F E A0B0
D0P0P1P2K
8.0±0.3
KTR25
3.5±0.05 1.75±0.1
2.0±0.05 Max 1.1
4.0±0.1 4.0±0.1
φ1.5 +0.1
0
Reel Dimensions
0 2
0 4
0 6
0 8
0 2
0 4
0 6
0 8
C
ABD
Label
ACCORDING TO EIAJ ET-7200B
APart No. B C D
(Unit : mm)
φ13±0.2
KTR03
KTR10
KTR18
KTR25
9 +1.0
0
φ180 0
−1.5 φ60 +1.0
0
R1120A
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, ofce-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
