Accessories Accessories Retroreflective Targets . . . . . . . . . . . . . . . . . . . . 722 Retroreflective Tape . . . . . . . . . . . . . . . . . . . . . . 731 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740 BEAM TRACKERTM . . . . . . . . . . . . . . . . . . . . . . . . 755 LAT-1 Laser Alignment Tool . . . . . . . . . . . . . . . . . 756 DBQ5 Demo Box . . . . . . . . . . . . . . . . . . . . . . . . 757 SPS100 Sensor Power Supply . . . . . . . . . . . . . . . 758 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 721 Accessories - Retroreflectors Retroreflectors * High-quality acrylic targets, high-temperature targets, and adhesive-backed retro tapes * Comprehensive selection of sizes, shapes and mounting options * Banner also offers several "micro-prism" reflectors, for use with laser retroreflective sensors and Banner VS3 models. NOTE: Sensing range and signal strength at any given sensor-to-target distance will vary due to target reflectivity and target area. A "Reflectivity Factor" is included for each target model to help predict sensor performance, relative to the excess gain curve plotted for target model BRT-3. Consider, also, target area when predicting performance. Changing to a high reflectivity reflector (like BRT-92x92C) may also extend sensor range and/or reduce the need for frequent reflector maintenance. Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 9 mm (0.35") BRT-3* 1.0 65C (150F) Clear Acrylic Lens 84 mm (3.30") o 4.8 mm (0.19") Mounting Hole 7.4 mm (0.29") BRT-84* 1.4 65C (150F) Clear Acrylic Lens 84 mm (3.30") o 4.5 mm (0.18") Mounting Hole 7.6 mm (0.30") BRT-2A 1.0 65C (150F) Clear Acrylic Lens 56 mm (2.20") o 5.8 mm (0.23") Mounting Hole * Optional brackets are available. See Brackets on pages 740 and 741. 722 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 7.2 mm (.28") 2.8 mm (.11") BRT-50 1.0 65C (150F) Clear Acrylic Lens 50.8 mm (2.00") 2.5 mm (0.10") BRT-1.5 1.0 65C (150F) Clear Acrylic Lens 40 mm (1.60") 46 mm (1.80") 7.6 mm (0.30") 2.5 mm (0.10") BRT-1 1.0 65C (150F) Clear Acrylic Lens 23 mm (0.90") 25 mm (1.00") 5.1 mm (0.20") 2.5 mm (0.10") BRT-.6 1.0 Clear Acrylic Lens 65C (150F) 18 mm (0.70") 5.1 mm (0.20") 10.2 mm (.40") 50.8 mm (2.00") BRT-50D* 1.0 20 mm (0.80") 2.8 mm (.11") 65C (150F) Clear Acrylic Lens 10 mm (.4") M5 X 0.8 * Optional brackets are available. See Brackets on pages 740 and 741. Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 723 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 9.0 mm (0.35") M5 x 0.8 BRT-42D 1.0 Clear Acrylic Lens 50C (120F) 42 mm (1.7") 10.0 mm (0.39") 9.2 mm (.36") 34.5 mm (1.36") BRT-35DM 1.2 50C (120F) Clear Acrylic Lens NOTE: This target has micro-prism geometry M5 X 0.8 8.4 mm (.33") 5.5 mm (0.21") 50.8 mm (2.00") BRT-50R* 1.0 2.8 mm (.11") 13 mm (.5") 50C (120F) Clear Acrylic Lens 2 mm (.08") 5.5 mm (.21") 2.8 mm (.11") 25.2 mm (.99") BRT-25R 1.0 6.5 mm (.26") 13 mm (.5") 50C (120F) Clear Acrylic Lens 2 mm (.08") 6.5 mm (.26") 6.8 mm (0.27") BRT-42A 1.0 50C (120F) 42 mm (1.7") o 3.5 mm (2) (0.14") 724 50.0 mm (1.97") 60 mm (2.4") Clear Acrylic Lens 3.5 mm (0.14") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions o 5.0 mm (2) (0.20") 116 mm (4.57") BRT-100X55A 1.5 50C (120F) 132 mm (5.2") 55.5 mm (2.20") Clear Acrylic Lens 9.0 mm (0.35") 100 mm (3.9") 92 mm (3.6") BRT-92X92C* 3.0 9 mm (0.4") 100 mm (3.9") 50C (120F) 92 mm (3.6") Clear Acrylic Lens 3.5 mm (0.13") 84.5 mm (3.3") 77 mm (3.0") BRT-77X77C* 2.0 9 mm (0.4") 84.5 mm (3.3") 50C (120F) 77 mm (3.0") Clear Acrylic Lens 3.5 mm (0.13") BRT-100X50 1.5 101 mm (4.0") 50C (120F) 50.6 mm (2.00") Clear Acrylic Lens 8.0 mm (0.32") * Optional brackets are available. See Brackets on pages 740 and 741. Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 725 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 50 mm (1.97") 42 mm (1.65") BRT-80X50C 1.4 65C (150F) 7.2 mm (0.28") 72.0 mm (2.83") Clear Acrylic Lens o 3.5 mm (2) (0.14") 51 mm (2.0") BRT-2X2* 1.0 50C (120F) 10 mm (0.4") 30 mm (1.2") 3.5 mm (0.14") 8.9 mm (0.40") 51 mm (2.0") 56 mm (2.2") 80 mm (3.15") Clear Acrylic Lens 4.2 mm x 14.2 mm Slot (2) (0.16" x 0.56") 61 mm (2.4") 3.5 mm (0.14") 51 mm (2.0") 38 mm (1.5") BRT-36X40BM 1.2 NOTE: This target has micro-prism geometry 51 mm (2.0") 40 mm (1.6") 50C (120F) 4.3 mm (0.16") 10 mm (0.4") 7 mm (0.3") Clear Acrylic Lens 20 mm (0.8") 61 mm (2.4") 3.5 mm (0.14") 10 mm (0.4") 40.5 mm (1.60") 7.2 mm (0.28") 34 mm (1.34") BRT-60X40C* 1.4 50C (120F) 52.0 mm (2.05") 60 mm (2.40") Clear Acrylic Lens o 3.5 mm (2) (0.14") BRT-48X32 1.0 50C (120F) 3.5 mm (0.14") Clear Acrylic Lens 32.5 mm (1.28") 48.0 mm (1.90") 8.0 mm (0.32") * Optional brackets are available. See Brackets on pages 740 and 741. 726 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 32.5 mm (1.28") BRT-48X32A 1.0 8.0 mm (0.32") 48.0 mm (1.90") 50C (120F) 56.0 mm (2.20") 65 mm (2.5") Clear Acrylic Lens o 3.5 mm (2) (0.14") 8.0 mm (0.32") 32.5 mm (1.28") 48 mm (1.90") BRT-48X32B 1.0 50C (120F) 4.5 mm (0.18") 17.0 mm (0.67") 3.5 mm (0.14") 4 x 10 mm (2) (0.16 x .39") Clear Acrylic Lens 3.5 mm (0.14") 13.8 mm (0.54") 4.9 mm (0.19") 9.7 mm (0.38") BRT-23X14CM 1.2 65C (150F) 57 mm (2.20") 23.0 mm (0.91") 19.0 mm (0.75") NOTE: This target has micro-prism geometry o2 mm (0.08") BRT-40X23 BRT-40X23B 1.4 1.4 1.0 mm (0.04") Clear Acrylic Lens 50C (120F) 23.5 mm (0.93") 8.0 mm (0.32") 23.5 mm (0.93") 8.0 mm (0.32") 40.0 mm (1.60") 50C (120F) Clear Acrylic Lens o 3.5 mm (2) (0.14") 12.1 mm (0.48") 3.5 mm (0.14") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 40.0 mm (1.60") 47.5 mm (1.90") 3.5 mm (0.14") 727 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 3.0 mm (.12") 20 mm (0.8") BRT-32X20AM 1.2 65C (150F) 26 mm 20 mm 32 mm (1.0") (0.8") (1.1") NOTE: This target has micro-prism geometry o3.5 mm (0.14") 2.0 mm (0.08") 23.5 mm (0.93") 8 mm (0.3") o 3.5 mm (2) (0.14") BRT-35X20A 1.4 50C (120F) 40 mm (1.6") 48 mm (1.9") 3.8 mm (0.15") 1.0 8.0 mm (0.32") 60 mm (2.4") 50.0 mm (1.97") 50C (120F) 55 mm (2.2") 3.5 mm (0.14") 18 mm (0.7") BRT-40X18A Clear Acrylic Lens Clear Acrylic Lens o 3.5 mm (2) (0.14") 7.3 mm (0.29 ") 19.3 mm (0.76") BRT-40X19A 1.3 50C (120F) 50.0 mm (1.97") 3.5 mm (0.14") 60.2 mm (2.37") o4.0 mm (0.16") 19.3 mm (0.76") BRT-40X19AM 1.2 50C (120F) 50.0 mm (1.97") 3.2 mm (0.13") 60.2 mm (2.37") NOTE: This target has micro-prism geometry o4.0 mm (0.16") 728 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 3.5 mm 20.0 mm (0.79") BRT-40X20AM 1.2 50C (120F) NOTE: This target has micro-prism geometry 30.0 mm (1.18") 37.0 mm (1.46") 42.0 mm (1.65") 2.0 mm o3.0 mm (0.12") 32.0 mm (1.26") 3.6 mm (0.14") BRT-40X23A 1.4 10.0 mm (0.39") 1.9 mm (0.75") 50C (120F) 23.1 mm (0.91") 2x o1.9mm (0.8") 39.1 mm (1.54") 8.2 mm (0.32") 10 mm (0.4") BRT-62X10AM 1.2 65C (150F) 50 mm (1.97" 3.5 mm (0.14") 62 mm (2.4") 56 mm (2.21") NOTE: This target has micro-prism geometry 19 mm (0.75") BRT-53X19A 1.4 50C (120F) 53.0 mm (2.10") 8.0 mm (0.32") 63.0 mm (2.48") 72 mm (2.80") Clear Acrylic Lens o 3.5 mm (2) (0.14") 3.5 mm (0.14") These targets are not recommended for polarized retroreflective sensors Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 729 Accessories - Retroreflectors Retroreflective Targets Model Reflectivity Factor Maximum Temperature Dimensions 6.5 mm (0.26") 18.5 mm (0.73") BRT-100X18A 1.4 50C (120F) 110 mm (4.33") 120 mm (4.70") Clear Acrylic Lens o 4 mm (2) (0.16") 3.8 mm (0.15") 19 mm (0.75") BRT-L 0.8 65C (150F) Clear Acrylic Lens Adhesive Backing 165 mm (6.50") o 10 mm (2) (0.4") BRT-41AHT 1.0 200C (390F) 41 mm (1.6") 72 mm (2.8") 102 mm (4.0") 128 mm (5.0") 40 mm (1.6") Glass Lens 45 mm (1.8") 100 mm (4.00") BRT-4HT 0.15 480C (900F) 100 mm (4.00") 0.5 mm (0.02") Aluminum These targets are not recommended for polarized retroreflective sensors. 730 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Retroreflectors Retroreflective Tape Note: for maximum adhesion of all tape products, surfaces must be clean. Model BRT-THG-3X3-10 BRT-THG-4X4-5 BRT-THG-8.5X11-2 BRT-THG-18X36 BRT-THG-1-100 BRT-THG-2-100 BRT-THG-3-100 BRT-T-100 BRT-THT-100 BRT-TVHG2X2* Reflectivity Maximum Factor Temperature 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.2 0.07 0.8 60C (140F) 60C (140F) 60C (140F) 60C (140F) 60C (140F) 60C (140F) 60C (140F) 65C (150F) 175C (350F) 60C (140F) Size 75 x 75 mm (3 x 3") 100 x 100 mm (4 x 4") 216 x 280 mm (8.5 x 11") 457 x 914 mm (18 x 36") 25 mm (1") wide 50 mm (2") wide 75 mm (3") wide 25 mm (1") wide 25 mm (1") wide 50 x 50 mm (2 x 2") Unit Package of 10 Package of 5 Package of 2 Single Sheet 2.5 m (100") length 2.5 m (100") length 2.5 m (100") length 2.5 m (100") length 2.5 m (100") length Package of 4 These targets are not recommended for polarized retroreflective sensors. * These are sealed micro-prism style pieces and may not be cut. Suitable for use with Laser sensors, VS3 sensors and SME312LPC model sensors. Not suggested for close range (less than 4") except with VS3 sensors. Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 731 Accessories - Cables and Connectors Cables and Connectors Quick-disconnect (QD) cables allow sensors to be replaced or moved quickly, minimizing down-time * Pico-, euro-, and mini-styles are available for dc-powered sensors * Micro- and mini-styles are available for ac-powered sensors * Choose straight or right-angle connectors * Mini-style receptacles are available for creating quick-disconnect MULTI-BEAM, MAXI-BEAM and Q85 Series sensors * Pico- and euro-style field-wireable connectors From bottom left to top right: Right-angle Micro-, Straight Micro-, Right-angle Pico-, Straight Pico- and Mini-style cables Pico-Style Quick-Disconnect Cables Cable: PUR jacket, polyurethane connector body, POM snap-lock coupling Conductors: 26 or 24 AWG high-flex stranded, gold-plated contacts Temperature: -40 to +90C (-40 to +194F) Voltage Rating: 30V ac/36V dc Style Model Length Connection Type Used with: Dimensions Pin-out o 10 mm max. (0.4") 3-Pin Straight 3-Pin Right-angle PKG3-2 2 m (6.5') Snap-on * M12 Laser emitters * Q08 Diffuse Mode sensors * Q10 series * Q14 series PKW3-2 2 m (6.5') 28 mm max. (1.1") Black Wire Blue Wire Brown Wire 27.9 mm (1.10") 14.6 mm (0.57") Snap-on o 8.3 mm (0.33") 3-Pin Straight PKG3M-2 PKG3M-9 2 m (6.5') 9 m (30') 34.7 mm (1.37") M8 x 1 Threaded 9.6 mm (0.38") Black Wire * VS1 series * VS2 series * VS3 series 3-Pin Right-angle PKW3M-2 PKW3M-9 2 m (6.5') 9 m (30') Blue Wire Brown Wire Black Wire White Wire Blue Wire Brown Wire 23.5 mm (0.93") 16.5 mm (0.65") Threaded o9.6 mm (0.38") M8 x 1 o 10 mm max. (0.4") 4-Pin Straight 4-Pin Right-angle PKG4-2 PKW4-2 2 m (6.5') 2 m (6.5') Snap-on Snap-on * MINI-BEAM 2 * Q23 series * D11 series * D12 series * EZ-BEAM S12 series * PICO-AMP 28 mm max. (1.1") 27.9 mm (1.10") 14.6 mm (0.57") o 8.3 mm (0.33") 732 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Cables and Connectors Pico-Style Quick-Disconnect Cables (continued) Style Model Length Connection Type Used with: Dimensions Pin-out o 10 mm max. (0.4") 6-Pin Straight PKG6Z-2 PKG6Z-9 2 m (6.5') 9 m (30') Snap-on 28 mm max. (1.1") Brown Wire Gray Wire * D10 Series sensors Pink Wire White Wire Blue Wire Black Wire 25 mm max. (1.0") 6-Pin Right-angle PKW6Z-2 PKW6Z-9 2 m (6.5') 9 m (30') Snap-on 20 mm (0.8") o12 mm max. (0.5") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 733 Accessories - Cables and Connectors Euro-Style Quick-Disconnect Cables Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut Conductors: 22 or 20 AWG high-flex stranded, PVC insulation, gold-plated contacts Temperature: -40 to +90C (-40 to +194F) Voltage Rating: 250V ac/300V dc Style 4-Pin Straight Model Length MQD9-406 MQD9-415 2 m (6.5') 5 m (15') Used with: Dimensions Pin-out o 15 mm (0.6") 44 mm max. (1.7") M12 x 1 Blue Wire * MINI-BEAM and Q45 series NAMUR sensors 4-Pin Right-angle MQD9-406RA MQD9-415RA Brown Wire 38 mm max. (1.5") 2 m (6.5') 5 m (15') 38 mm max. (1.5") M12 x 1 o 15 mm (0.6") 4-Pin Straight 4-Pin Right-angle MQDC-406 MQDC-415 MQDC-430 MQDC-406RA MQDC-415RA MQDC-430RA 2 m (6.5') 5 m (15') 9 m (30') 2 m (6.5') 5 m (15') 9 m (30') o 15 mm (0.6") * Standard OMNI-BEAM (QDH suffix) * Q45 dc sensors (Q5 suffix) * MINI-BEAM dc SM312 series * EZ-BEAM dc (Q suffix except S12) * SP12 series * QM42 series * PVA sensors 44 mm max. (1.7") M12 x 1 White Wire Brown Wire 38 mm max. (1.5") Blue Wire Black Wire 38 mm max. (1.5") M12 x 1 o 15 mm (0.6") 5-Pin Straight 5-Pin Right-angle MQDC1-506 MQDC1-515 MQDC1-530 MQDC1-506RA MQDC1-515RA MQDC1-530RA 2 m (6.5') 5 m (15') 9 m (30') 2 m (6.5') 5 m (15') 9 m (30') o 15 mm (0.6") * MINI-BEAM Expert * PicoDot * Q45 Laser Retro * R55 * R55F * SL30, SL30E * SL10, SL10E * Q60 44 mm max. (1.7") M12 x 1 White Wire Brown Wire 38 mm max. (1.5") Blue Wire Black Wire Gray Wire 38 mm max. (1.5") M12 x 1 o 15 mm (0.6") 6-Pin Straight MQDC-606 MQDC-615 MQDC-630 2 m (6.5') 5 m (15') 9 m (30') o 15 mm (0.6") 44 mm max. (1.7") M12 x 1 White Wire Brown Wire * R55 Expert series 6-Pin Right-angle MQDC-606RA MQDC-615RA MQDC-630RA 38 mm max. (1.5") 2 m (6.5') 5 m (15') 9 m (30') Blue Wire Black Wire Gray Wire Pink Wire 38 mm max. (1.5") M12 x 1 o 15 mm (0.6") 734 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Cables and Connectors Micro-Style Quick-Disconnect Cables Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut Conductors: 22 or 20 AWG high-flex stranded, PVC insulation, gold-plated contacts Temperature: -40 to +80C (-40 to +176F) Voltage Rating: 250V ac/300V dc (3-pin), 125V ac/150V dc (4-pin) Style 3-Pin Straight Model MQDC-306 MQDC-315 MQDC-330 Length Used with: 2 m (6.5') 5 m (15') 9 m (30') Dimensions Pin-out o15 mm (0.6") 44 mm max. (1.7") o 1/2-20UNF-2B Green Wire * MINI-BEAM ac SM2A312 series 3-Pin Right-angle MQDC-306RA MQDC-315RA MQDC-330RA 38 mm max. (1.5") 2 m (6.5') 5 m (15') 9 m (30') Red/White Wire Red/Black Wire 38 mm max. (1.5") 1/2-20UNF-2B o 15 mm (0.6") 4-Pin Straight MQAC-406 MQAC-415 MQAC-430 2 m (6.5') 5 m (15') 9 m (30') o15 mm (0.6") 44 mm max. (1.7") o 1/2-20UNF-2B Green Wire * Q45 ac series (suffix Q1) * EZ-BEAM ac series (suffix Q1) 4-Pin Right-angle MQAC-406RA MQAC-415RA MQAC-430RA 2 m (6.5') 5 m (15') 9 m (30') Red Wire 38 mm max. (1.5") Red/White Wire Red/Black Wire 38 mm max. (1.5") 1/2-20UNF-2B o 15 mm (0.6") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 735 Accessories - Cables and Connectors Mini-Style Quick-Disconnect Cables 61 mm max. (2.4") Cable: PVC jacket, polyurethane connector body, nylon coupling nut Conductors: 18 AWG high-flex stranded, PVC insulation, gold plated contacts Temperature: -40 to +80C (-40 to +176F) Voltage Rating: 250V ac/300V dc Style Model Length 3-Pin Female Pinout Straight MBCC-306 MBCC-312 MBCC-330 2 m (6.5') 4 m (12') 9 m (30') * Q45 3-wire ac (Q suffix) * VALU-BEAM 2-wire * VALU-BEAM emitters * VALU-BEAM 990 series 3-Pin Female Pinout Straight SM30CC-306 SM30CC-312 2 m (6.5') 4 m (12') * SM30 2-wire ac 4-Pin Female Pinout Straight 5-Pin Female Pinout Straight 736 o 28 mm max. (1.1") Used with: Pin-out Black Wire Blue Wire MBCC-506 MBCC-512 MBCC-530 Brown Wire Green Wire Red/White Wire MBCC-406 MBCC-412 MBCC-430 7/8-16UN-2B 2 m (6.5') 4 m (12') 9 m (30') * Q45 dc (Q suffix) * OMNI-BEAM dc power blocks * VALU-BEAM 912 dc series * SM30 dc series * Optical Touch Button (OTB) w/solid-state output 2 m (6.5') 4 m (12') 9 m (30') * Q45 Laser Retro * OMNI-BEAM ac power blocks * OMNI-BEAM dc with e/m relay * VALU-BEAM 915 series * OTB & LTB w/SPDT relay * Q45 series 5-wire ac * Q45X series White Wire Brown Wire White Wire Brown Wire Red/Black Wire Black Wire Blue Wire Black Wire Blue Wire Yellow Wire Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Cables and Connectors Pico-Style Field-Wireable Connectors Contacts: Gold-plated; rated 60V ac/dc max., 4 A max. Cable Diameter: 4.0 to 5.0 mm (0.16 to 0.20") Temperature: -25 to +70C (-13 to +156F) Environmental Rating: NEMA 6P, IP 67 Style Model Gender Dimensions Pin-out 43.5 mm (1.7") FIC-M8M3 M8 x 1 mm Male 3-Pin Straight 13 mm (0.5") 43.5 mm (1.7") FIC-M8F3 Female M8 x 1 mm 25mm (1.0") FIC-M8M3A 3-Pin Right-angle 13 mm (0.5") M8 x 1 mm 13 mm (0.5") M8 x 1 mm 13 mm (0.5") 41.5 mm (1.6") 25mm (1.0") FIC-M8F3A M8 x 1 mm Male 12 mm (0.5") Female 12 mm (0.5") 13 mm (0.5") 41.5 mm (1.6") 43.5 mm (1.7") FIC-M8M4 Male 4-Pin Straight 43.5 mm (1.7") FIC-M8F4 Female M8 x 1 mm 25mm (1.0") FIC-M8M4A 4-Pin Right-angle 13 mm (0.5") M8 x 1 mm 13 mm (0.5") 41.5 mm (1.6") 25mm (1.0") FIC-M8F4A M8 x 1 mm Male 12 mm (0.5") Female 12 mm (0.5") 13 mm (0.5") 41.5 mm (1.6") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 737 Accessories - Cables and Connectors Euro-Style Field-Wireable Connectors Contacts: Gold-plated; 4-pin models rated 250V ac/dc max., 4 A max.; 5-pin models rated 50V ac/dc max., 4A max. Cable Diameter: 4.0 to 5.0 mm (0.16 to 0.20") Temperature: -25 to +90C (-13 to +194F) Environmental Rating: NEMA 6P, IP 67 Style Model Gender Dimensions Pin-out 60 mm (2.4") 10 mm (0.4") FIC-M12M4 15.0 mm (0.59") 4-Pin Straight FIC-M12F4 M12 x 1 60 mm (2.4") 10 mm (0.4") Female 15.0 mm (0.59") FIC-M12M4A 20 mm (0.8") Male M12 x 1 20 mm (0.8") 41 mm (1.6") Male M12 x 1 30.5 mm (1.20") 4-Pin Right-angle 20 mm (0.8") 20 mm (0.8") FIC-M12F4A Female 15.0 mm (0.59") 60 mm (2.4") 10 mm (0.4") FIC-M12M5 20 mm (0.8") Male 15.0 mm (0.59") 5-Pin Straight M12 x 1 60 mm (2.4") 10 mm (0.4") FIC-M12F5 20 mm (0.8") Female 15.0 mm (0.59") M12 x 1 20 mm (0.8") FIC-M12M5A 41 mm (1.6") Male M12 x 1 30.5 mm (1.20") 5-Pin Right-angle 20 mm (0.8") FIC-M12F5A Female 15.0 mm (0.59") 738 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Cables and Connectors Mini-Style Quick-Disconnect Receptacles Housing: Nickel chrome-plated brass or zinc alloy Conductors: 20 AWG (3- and 4-pin), or 24 AWG (5-pin), PVC insulation, gold plated pins Temperature: -40 to +70C (-40 to +158F) Voltage Rating: 600V ac (3-pin), 300V ac (5-pin) Style Model Wire Length Used with: Dimensions Pin-out Male Pinout 3-Pin Male Pin-out MBC-3 300 mm (12") Black wire * MULTI-BEAM * MAXI-BEAM * Q85 series (emitters) Brown wire Side View Blue wire 28 mm (1.1 in) 1/2-14NPSM 4-Pin Male Pin-out MBC-4 300 mm (12") * MULTI-BEAM * MAXI-BEAM * Q85 series 7/8-16UN-2A Male Pinout 25 mm Hex (1.0 in) Black wire White wire O-ring Blue wire Brown wire Side View 20 mm (0.8 in) 5-Pin Male Pin-out MBC-5 60 mm (2.5") * Q85 series 1/2-14NPSM 7/8-16UN-2A Male Pinout Black wire Blue wire White wire Brown wire Yellow wire O-ring Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 739 Accessories - Cables and Connectors Brackets * Choose from a wide selection of sensor mounting brackets * Most metal brackets are constructed of stainless steel * Most non-metallic brackets are molded from reinforced thermoplastic polyester,, including versatile swivel models NOTE: See the accessories listing at the end of each product section for additional brackets which are designed specifically for one product family Mounting Brackets Model Description Used with: Dimensions DIN - 35-70: Approx.70 mm ( 2.7") DIN-35-70 DIN-35-105 DIN-35-140 35 mm DIN Rail DIN - 35-105: Approx. 105 mm (4.1") DIN - 35-140: Approx. 140 mm (5.5") DIN-35-70: 70 mm (2.7") DIN-35-105: 105 mm (4.1") DIN-35-140: 140 mm (5.5") * D12 * D11 * RS-11 socket * PICO-AMP 35 mm (1.4") 25.4 mm (1.00") 35 mm (1.4") 5.3 mm (0.21") 7.6 mm (0.30") 68 mm (2.7") 52 mm (2.0") RMB50 * Protective mounting bracket for retroreflective targets * 14-gauge 316 stainless steel * Stainless steel M3 x 0.5 hardware is included The following reflectors: * * * * 6 mm (0.2") 30 15 R18 mm 13 mm (0.5") 62 mm (2.4") BRT-60X40C BRT-2X2 BRT-50D BRT-50R 54 mm (2.1") 34 mm (1.3") 26 mm (1.0") o 4.5 mm (0.18") 4 x M3 x0.5 o 6.3 mm (0.25") 32 mm (1.26") 31 mm (1.2") 6 x 4.5 mm (0.18") 11 mm (0.4") 26 mm (1.0") 12 mm (0.47") 92 mm (3.6") RMB85 30 15 77 mm (3.0") 6 mm (0.2") R28 mm * Protective mounting bracket for retroreflective targets * 14-gauge 316 stainless steel * Stainless steel M3 x 0.5 hardware is included The following reflectors: * BRT-3 * BRT-77X77C 95 mm (3.7") 77 mm (3.0") 46 mm (1.0") 38.5 mm (1.5") 4 x M3 x 0.5 o 4.8 mm (0.19") 47.5 mm (1.87") 6 x 4.5 mm (0.18") 44 mm (1.7") 12 mm (0.47") 740 o 4.5 mm (0.18") 23 mm (0.9") 13 mm (0.51") 30 mm (1.2") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions RMB100 107 mm (4.2") 92 mm (3.6") 30 15 6 mm (0.2") R33 mm * Protective mounting bracket for retroreflective targets * 14-gauge 316 stainless steel * Stainless steel M3 x 0.5 hardware is included The following reflectors: * * * * BRT-92X92C BRT-77X77C BRT-3 BRT-84 77 mm (3.0") 92 mm (3.6") 8 x M3 x 0.5 o 4.5 mm (0.18") 28 mm (1.1") 4.5 mm (0.18") 13.5 mm (0.53") o 4.8 mm (0.19") 110 mm (4.3") 56 mm (2.2") 38.5 mm 55 mm (1.5") (2.1") 46 mm (1.8") 50 mm (2.0") 15 mm (0.59") 77 mm (3.0") 34 mm (1.3") 12 mm (0.47") SMB127 Mounting Block 36 mm (1.4") 12.9 mm (0.508") 10.6 mm (0.42") 21.1 mm (0.83") 23.6 mm (0.93") * Mounting block * Comes with: 3/64" hex wrench, 4 set screws 3x #4-40 Thru 21.6 mm (0.85") * M12 Laser emitters 10.6 mm (0.42 ") 2x M3 or #4 Clearance 12.9 mm (0.508") 12.9 mm (0.508") 26.9 mm (1.06") 22.9 mm (0.90") 36 mm (1.4") 17.8 mm (0.70") 13.5 mm (0.53") SMB12MM * 12-gauge, stainless steel, right angle mounting bracket for barrel style sensors with 12 mm threads * Curved mounting slot allows the bracket 10 of lateral movement * Mounting holes accommodate M4 (#8) hardware 6.4 mm (0.25") 5.1 mm (0.20") 18.5 mm (0.73") 21.6 mm (0.85") 17.8 mm (0.70") 12.3 mm (0.49") 25.4 mm (1.00") 12.7 mm (0.50") * S12 * SP12 o 12.3 mm (0.49") 38.1 mm (1.50") 10 Slot 4.6 mm (0.18") R 24.1 mm (0.95") R 3.1 mm (0.12") 42.9 mm (1.69") 20 R 5.1 mm (0.20") o 4.6 mm (0.18") SMB1812SF * 12 mm swivel * Black reinforced thermoplastic polyester * Includes stainless steel swivel locking hardware 36.0 mm (1.42") * S12 * SP12 10.6 mm (0.42") M12 x 1 Internal Thread 42.0 mm (1.65") 22.9 mm (0.9") 50.8 mm (2.00") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 25.4 mm (1.00") 741 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMB1815SF * Swivel with set screws for mounting of T18 or T30 by its cable hub * Black reinforced * T18 thermoplastic polyester * T30 * Includes stainless steel swivel locking hardware and 3/64"3 hex wrench 36.0 mm (1.42") 10.6 mm (0.42") o15.0 mm (0.59") 42.0 mm (1.65") 22.9 mm (0.9") 50.8 mm (2.00") SMB18A * 12-gauge, stainless steel, right angle mounting bracket with a curved mounting slot for versatility and orientation * Clearance for M4 (#8) hardware * MINI-BEAM * M18 * Q25 * S18 * T18 * QS18 (select models only) 25.4 mm (1.00") * Use 4 mm (#8) screws to mount bracket. Drill screw holes 24.2 mm (0.95") apart. 18.5 mm (0.73") 25.4 mm (1.00") 30 30 mm (1.2") 41 mm (1.6") R 24.2 mm (0.95") 46 mm (1.8") 4.6 mm* (0.18") o 4.6 mm* (0.18") 7.6 mm (0.30") SMB18C 40.0 mm (1.60") * 18 mm split clamp bracket * Black thermoplastic polyester * Includes stainless steel mounting hardware * MINI-BEAM * M18 * Q25 * S18 * T18 13 mm (0.5") 42.4 mm (1.67") 21.1 mm (0.83") 14.0 mm (0.55") Nut Plate 2.5 mm (0.10") 30.0 mm (1.18") M5 x 0.8 x 60 mm Screw (2) SMB18Q * Use 4 mm (#8) screws to mount bracket. Drill screw holes 24.2 mm (0.95") apart. * 18 mm angled flanged bracket for Q25 sensors * 12 ga stainless steel 19 mm (0.75") 25.4 mm (1.00") 30 30 mm (1.2 in) * Q25 41 mm (1.60") R 24.2 mm (0.95") 4.6 mm (0.18")* o 4.6 mm (0.18")* 742 46 mm (1.80") 10 mm (0.40') 7.6 mm (0.30") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMB18S 46.0 mm (1.81") * 18 mm swivel bracket * black thermoplastic polyester * Includes stainless steel mounting hardware * MINI-BEAM * M18 * Q25 * S18 * T18 * 18 mm swivel bracket * Black thermoplastic polyester * Includes stainless steel swivel locking hardware * MINI-BEAM * M18 * Q25 * S18 * T18 10.9 mm (0.43") 44.5 mm (1.75") Spacer (If Required) 25.4 mm (1.00") 13.0 mm (0.50") 36.0 mm (1.42") 6.4 mm (0.25") Nut Plate 2.5 mm (0.10") M5 x 0.8 x 60 mm Screw (2) SMB18SF 36.0 mm (1.42") M18 x 1 internal thread 10.6 mm (0.42") 42.0 mm (1.65") 22.9 mm (0.9") 50.8 mm (2.00") SMB18UR 25.4 mm (1.00") 16.0 mm (0.63 ") SMB18UR Top o18.3 mm (0.72") 66.0 mm (2.60") 45.2 mm (1.78") 27.2 mm (1.07") 50.8 mm (2.0") 60 * MINI-BEAM * M18 * S18 * T18 R2.5 mm (0.10") 24.6 mm (0.97") 46.7 mm (1.84") 25.4 mm (1.00") 9.7 mm (0.38") SMB18UR Bottom 60 4X 6.9 mm (0.27") 41.7 mm (1.64") 8.1 mm (0.32") 41.7 mm (1.64") 60 o20.3 mm (0.80") o30.5 mm (1.20") * 2-piece universal swivel bracket for 18 mm sensors * 300 series stainless steel * Includes stainless steel swivel locking hardware 20.8 mm (0.82") 2.7 mm (0.10") 20.3 mm (0.80") 20.3 mm (0.80") o30.5 mm (1.20") 6X #10-32 Thru 25.4 mm (1.00") 20.8 mm (0.82") 33.8 mm (1.33") 63.5 mm (2.50") 71.1 mm (2.80") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 2.7 mm (0.10") 743 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions 31.8 mm SMB300 Mounting Slot for: LF/PT/400 LP400WB (1.25") 6.4 mm M5 (#10) Screw Clearance (2) (0.25") Mounting Slot for: SP300D SP300L SP300EL/RL 4 mm (#6) Screw Clearance (4) 41.4 mm (1.63") * Steel right angle bracket designed for 2-axis mounting * Clearance slot for mounting LR/PT400 * SP300 * LR/PT400 * LP400WB * LR/PT200 47.8 mm (1.88") 25.4 mm (1.00") 90 9.7 mm (0.38") M4.5 (#8) Screw Clearance (2) 25 (2) 12.7 mm (0.50") 30 (2) M5 (#10) Screw Clearance (2) 38.1 mm (1.50") Mounting for LR/PT200 22.4 mm (0.88") SMB3018SC * 18 mm swivel barrel or side mount bracket * Black reinforced thermoplastic polyester * Includes stainless steel swivel locking hardware * MINI-BEAM * Q23 * QM42/QMT42 * Q25 * S18 * T18 50.8 mm (2.00") 66.5 mm (2.62") M18 x 1 internal thread 56.7 mm (2.31") Assembled 68.0 mm (2.68") 29.0 mm (1.14") SMB30A * 12-gauge, stainless steel, right angle mounting bracket with a curved mounting slot for versatility and orientation * Clearance for M6 (1/4") hardware * Use 5 mm (#10) screws to mount bracket. Drill screw holes 40.0 mm (1.58") apart. 69 mm (2.70") 6.3 mm (0.25")* o 6.3 mm (0.25")* SMB30C * 30 mm split clamp bracket * Black reinforced thermoplastic polyester * Includes stainless steel mounting hardware 744 o 30.5 mm (1.20") 61 mm (2.40") 30 R 40 mm (1.58") * OMNI-BEAM * Q45 * VALU-BEAM * SM30 * S30 * Q40 * T30 * OTB 38.5 mm (1.52") 45 mm (1.8") * SM30 * Q40 * S30 * T30 7.6 mm (0.30") 56.0 mm (2.20") 13 mm (0.5") 63.0 mm (2.48") 31.5 mm (1.24") 13.5 mm (0.53") Nut Plate 45.0 mm (1.77") 2.5 mm (0.10") M5 x 0.8 x 80 mm Screw (2) Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMB30MM 25.4 mm (1.00") * 30 mm, 12-gauge, stainless steel bracket with curved mounting slots for versatility and orientation * Clearance for M6 (1/4") hardware o30.1 mm (1.19") * OMNI-BEAM * Q45 * VALU-BEAM * SM30 * OTB 35.1 mm (1.38") 7.1 mm .28 x 90 (2 Slots) o 6.4 mm (0.25" dia.) 57.2 mm (2.25") 25.4 mm (1.00") R 25.4 mm (1.00") 57.2 mm 35.1 mm (2.25") (1.38") 69.9 mm (2.75") SMB30Q * Use 5 mm (#10 screws to mount bracket. Drill screw holes 40.0 mm (1.58") apart. * 30 mm angled flanged mounting bracket * Black reinforced thermoplastic polyester * Includes stainless steel hardware 30 o 30.7 mm (1.21") 38.5 mm (1.52") 45 mm (1.8") 61 mm (2.40") * Q40 10 mm (0.40") R 40 mm (1.58") 69 mm (2.70") 6.3 mm (0.25")* o 6.3 mm (0.25")* 7.6 mm (0.30") SMB30S * 30 mm swivel bracket * Black reinforced thermoplastic polyester * Includes stainless steel mounting and swivel locking hardware * OMNI-BEAM * Q45 * VALU-BEAM * SM30 * S30 * Q40 * T30 * OTB 63.5 mm (2.50") Not Shown: (2) M5 x 0.8 x 60 mm screws are supplied for clamping bracket together 12.2 mm (0.48") 82.5 mm (3.25") 43.2 mm (1.70") 50.8 mm (2.00") 25.4 mm (1.00") M5 x 0.8 x 30 mm Screw (2) SMB30SC * 30 mm swivel bracket * Black reinforced thermoplastic polyester * Includes stainless steel mounting and swivel locking hardware * OMNI-BEAM * Q45 * VALU-BEAM * SM30 * S30 * Q40 * T30 * OTB 50.8 mm (2.00") M30 x 1.5 internal thread 12.7 mm (0.50") 58.7 mm (2.31") 30.0 mm (1.18") 66.5 mm (2.62") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 29.0 mm (1.14") 745 Accessories - Brackets Mounting Brackets Model Description Used with: * Flat-mount swivel bracket with extended range of motion * Black reinforced thermoplastic polyester and 316 stainless steel * Includes stainless steel swivel locking hardware * MINI-BEAM * Q23 * QM42/QMT42 * S18 * M18 * T18 Dimensions SMB30SK 50.8 mm (2.00") 78.0 mm (3.07") 66.5 mm (2.62") 56.7 mm (2.31") Assembled 29.0 mm (1.14") 68.0 mm (2.68") SMB30SUS * Side mount swivel bracket - extended range of motion * MINI-BEAM * Black reinforced * Q23 thermoplastic polyester * QM42 * Includes stainless steel swivel locking hardware 50.8 mm (2.00") 66.5 mm (2.62") 56.7 mm (2.31") Assembled 2 x Hole for #6 Machine Screw 68.0 mm (2.68") 29.0 mm (1.14") SMB30UR Top SMB30UR 59.9 mm (2.36") 60 8X #10-32 38.1 mm 30.0 mm (1.50") (1.18") o38.1 mm (1.50") 76.2 mm (3.00") 23.1 mm (0.91") 2X o7.1 (0.28") 15.2 mm (0.60") 15.2 mm (0.60") 57.1 mm (2.25") 27.9 mm (1.11") 31.8 mm (1.25") 3.4 mm (0.14") * 2-piece universal swivel bracket for limit-switch style sensors * 300 series stainless steel * Includes stainless steel swivel locking hardware 82.2 mm (3.24") * MULTI-BEAM * MAXI-BEAM * Q45 * OMNI-BEAM * LS10 SMB30UR Bottom 31.8 mm (1.75") 50.8 mm (2.00") 90 5X 7.1 mm (0.28") 31.8 mm (1.25") 6X 1/4-28 o57.2 (2.25") 50.8 mm (2.00") 25.4 mm (1.0") 70.0 mm (2.75") 9.7 mm (0.38") 22.4 mm (0.88") 66.0 mm (2.6") 89.8 mm (3.54") 9.7 mm (0.38") 12.7 mm (0.50") 25.4 mm 1.00") 77.1 mm (3.04") 3.4 mm (0.14") 746 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMB42F 5.0 mm (0.20") 10.0 mm (0.40") 2x M4 x 0.7 12.7 mm (0.50") * 13-gauge stainless steel * Includes mounting hardware 28.3 mm (1.12") 25.4 mm (1.00") 25.4 mm (1.00") 9.6 mm (0.38") * QM42/QMT42 6.4 mm (0.25") 20.0 mm (0.79") 2.3 mm (0.09") 4x M3 x 0.5 12.7 mm (0.50") 23.3 mm (0.92") 37.1 mm (1.46") 48.4 mm (1.91") 40.0 mm (1.58") SMB42L 4x M4 x 0.7 6.4 mm (0.25") 2.3 mm (0.09") 5.0 mm (0.20") * 13-gauge stainless steel * Includes mounting hardware 12.7 mm (0.50") 3x 10.0 mm (0.40") 23.3 mm (0.92") * QM42/QMT42 3.0 mm (0.12") 33.0 mm (1.30") 25.4 mm (1.00") 2x M3 x 0.5 9.6 mm (0.38") SMB42T R 24.1 mm (0.95") R 5.1 mm (0.20") * 2-axis side mounting bracket * Stainless steel * Includes M3 sensor mounting hardware 15 (2) CL 31.8 mm (1.25") 10 (TYP) 4.32 mm (0.170") Slot (2) 20.3 mm (0.80") 20 * QM42/QMT42 o 3.05 mm Slot (0.120") o 3.05 mm (0.120") 90 2.5 mm (0.10") R 3.1 mm (0.12") (2) 20.1 mm (0.79") 45.5 mm (1.79") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 747 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMB42U 38.9 mm (1.53") 2x 8.9 mm (0.35") 2x M4 x 0.7 6.5 mm (0.25") * 13-gauge stainless steel * Includes mounting hardware * QM42/QMT42 12.7 mm (0.50") 30.0 mm (1.18") 25.4 mm (1.00") 25.4 mm (1.00") 3.1 mm (0.12") 12.7 mm (0.50") 23.3 mm (0.92") 2.3 mm (0.09") 3.1 mm (0.12") 9.6 mm (0.38") 4x M3 x 0.5 2x 11.4 mm (0.45") 2x 7.1 mm (0.28") SMB46A 31.8 mm (1.25") * 2-piece 12-gauge, stainless steel bracket assembly with precision sensor alignment * S186ELD adjustment * PicoDot * Includes 2 mm hex key 14.0 mm (0.55") 60 8x M5 or #10 clearance o6.6mm (0.26") o30.5mm (1.20") 60 64.5 mm (2.54") o18.3 mm (0.72") 43.0 mm (1.69") 61.0 mm (2.40") CL 6 mm (0.2") SMB46DF * "L" bracket * 14-gauge 316 stainless steel * MINI-BEAM * PicoDot * Q23 Series * QM42/QMT42 * Q14 6 mm (0.2") 5 mm (0.2") (2x) 15 mm (0.6") 8 mm (0.3") o 36 mm (1.4") o 6.5 mm (0.26") (6x) 16 mm (0.6") 65 mm (2.6") 54 mm (2.1") 748 2 mm (.1") 27 mm (1.1") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions 34 mm (1.3") CL 17 mm (0.7") SMB46S 10 mm (0.4") 3.5 mm (0.14") 6 mm (0.2") * "S" bracket * 14-gauge 316 stainless steel 6 mm (0.2") 5 mm (0.2") (4x) * MINI-BEAM * PicoDot * Q23/QH23 * QM42/QMT42 * Q14 15 mm (0.6") o 36 mm (1.4") o 6.5 mm (0.26") (6x) 8 mm (0.3") 16 mm (0.6") 65 mm (2.6") 2 mm (.1") 54 mm (2.1") 27 mm (1.1") 16 mm (0.6") 34 mm (1.3") CL 17 mm (0.7") SMB46U 13 mm (0.5") 3.5 mm (0.14") 6 mm (0.2") * "U" bracket * 14-gauge 316 stainless steel * "U" bracket * 14-gauge 316 stainless steel 6 mm (0.2") 5 mm (0.2") (4x) 15 mm (0.6") o 36 mm (1.4") o 6.5 mm (0.26") (6x) 8 mm (0.3") 16 mm (0.6") 16 mm (0.6") 65 mm (2.6") 2 mm (.1") 54 mm (2.1") 27 mm (1.1") 70 mm (2.8") 2x 11.4 mm (0.45") 2x 7.1 mm (0.28") SMB46X3 31.8 mm (1.25") * Assembly with mounting block and adjustable bracket * Includes: - 2 mm hex key - 3/64" hex key 4 set screws 14.0 mm (0.55") 60 8x M5 or #10 clearance * M12 Laser emitters o6.6mm (0.26") o30.5mm (1.20") 60 64.5 mm (2.54") 61 mm to 64 mm (2.4" to 2.5") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 61.0 mm (2.40") 749 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions 12.7 mm (0.50") SMB500 50.8 mm (2.00") 6.4 mm (0.25") 22.4 mm (0.88") 19.1 mm (0.75") 50.8 mm (2.00") * Universal steel mounting bracket 76.2 mm (3.00") 38.1 mm (1.50") 63.5 mm (2.50") * SM512 5.6 mm x 25.4 mm (0.22" x 1.00") (2 Places) 4.8 mm (0.19") x 40 Slot (6 Places) 17.5 mm (0.69") 38.1 mm (1.50") 90 1.9 mm #14 GA (0.75") 85.9 mm (3.38") 24.1 mm (0.95") SMB55A 2.6 mm (0.10") 31.8 mm (1.25") 11.4 mm (0.45") 13.3 mm (0.53") 12.7 mm (0.50") 15.2 mm (0.60") 8 x R 3.3 mm (0.13") 50.8 mm (2.00") * 15 offset bracket * 12-gauge stainless steel * R55 15.0 24.8 mm 2 x 12.4 mm (0.98") (0.49") 5.4 mm (0.21") 12 x R 2.6 mm (0.10") 25.4mm (1.00") 2 x 5.6 mm (0.22") 2 x 7.6 mm (0.30") 4 x R 6.4 mm (0.25") CL 27.9 mm (1.10") 50.8 mm (2.00") 24.1 mm (0.95") SMB55F 2.6 mm (0.10") 4 x R 6.4 mm (0.25") 11.4 mm (0.45") 13.3 mm (0.53") 12.7 mm (0.50") 15.2 mm (0.60") 82.6 mm (3.25") * Flat mount bracket * 12-gauge stainless steel 8 x R 3.3 mm (0.13") * R55 24.8 mm (0.98") 2 x 12.4 mm (0.49") 2 x 5.6 mm (0.22") 5.4 mm (0.21") 2 x 7.6 mm (0.30") 25.4mm (1.00") CL 12 X R 2.6 mm (0.10") 27.9 mm (1.10") 50.8 mm (2.00") 5.4 mm (0.21") SMB55RA 12 X R 2.6 mm (0.10") 25.4mm (1.00") CL * 90 offset bracket * 12-gauge stainless steel * R55 2 x 12.4 mm (0.49") 24.8 mm (0.98") 27.9 mm 50.8 mm (2.00") (1.10") 2 x 7.6 mm (0.30") 2 x 5.6 mm (0.22") 24.1 mm (0.95") 2.6 mm (0.10") 11.4 mm (0.45") 15.2 mm (0.60") 4 x R6.4 mm (0.25") 13.3 mm (0.53") 12.7 mm (0.50") 8 x R 3.3 mm (0.13") 750 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMB55S 30.5 mm (1.20") 2x 10.2 mm (0.40") 8.1 mm (0.32") 7.1 mm (0.28") 4x R6.4 mm (0.25") 8x R3.3 mm (0.13") 10.2 mm (0.40") * 15 offset bracket * 12-gauge stainless steel 2.6 mm (0.10") * R55 44.5 mm (1.75") 25.4 mm (1.00") 34.3 mm (1.35") 7.9 mm 3.8 mm (0.31") (0.15") 4x R2.6 (0.10") 15.0 28.0 mm (1.10") 8.2 mm (0.32") 2 x o4.6 mm (0.18") SMBF 2 x R5 mm (0.2") 28.6 mm (1.13") * Right angle bracket for glass fiber optics with 5 /16" - 24 threaded tip * 18-gauge stainless steel 19.1 mm (0.75") 14.2 mm (0.56") * Glass fiber with 5/16" - 24 tip 3.3 mm (0.13") 4.8 mm (0.19") 6.4 mm (0.25") 8.3 mm (0.33") 21.6 mm (0.85") 1.2mm (0.05") 15.2 mm (0.60") 4x R2.5 mm (0.10") SMBFP3 2 x o 3.3 mm (0.13") 25.4 mm (1.00") * Right angle bracket for plastic fiber optics with 3 mm threaded tip * 18-gauge stainless steel * Plastic fiber with M3 tip 3.2 mm (.126") 12.7 mm (0.50") 6.4 mm (0.25") 19.1 mm (0.75") 3.3 mm (0.13") 5.8 mm (0.23") 1.2 mm (0.05") 12.7 mm (0.50") 10.6 mm (0.65") 4x R2.5 mm (0.10") SMBFP4 2 x o 3.3 mm (0.13") 25.4 mm (1.00") * Right angle bracket for plastic fiber optics with 4 mm threaded tip * 18-gauge stainless steel 4.2 mm (.165") * Plastic fiber with M4 tip 12.7 mm (0.50") 3.2 mm (0.13") 6.4 mm (0.25") 1.2 mm (0.05") 12.7 mm (0.50") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 3.2 mm (0.13") 19.1 mm (0.75") 3.3 mm (0.13") 5.8 mm (0.23") 10.6 mm (0.65") 751 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMBFP4N o4.2 mm (0.17") 4.6 mm (0.35") 12.00 mm (0.47") 1.5 mm (0.06") 2x Full R 4.6 mm (0.18") 8.9 mm (0.35") * Low profile bracket for plastic fiber optics with 4 mm threaded tip * 18-gauge stainless steel 5.1 mm (0.20") * Plastic fiber with M4 tip 7.6 mm (0.30") 15.2 mm (0.60") 1.2 mm (0.05") 25.4 mm (1.00") 90 4x R2.5 mm (0.10") SMBFP6 2 x o 3.3 mm (0.13") 25.4 mm (1.00") * Right angle bracket for plastic fiber optics with 6 mm threaded tip * 18-gauge stainless steel 6.2 mm (.244") * Plastic fiber with M6 tip 12.7 mm (0.50") 6.4 mm (0.25") 19.1 mm (0.75") 3.3 mm (0.13") 5.8 mm (0.23") 1.2 mm (0.05") 12.7 mm (0.50") 3.2 mm (0.13") 10.6 mm (0.65") 34.0 mm (1.34") SMBPVA2 17.0 mm (0.67") o4.4 mm (0.18") * Set of 4 molded brackets * Snaps onto standard 28 mm diameter pipe * 2 required per PVA sensor 66 mm (2.6") * PVA 2 x o4.4 mm (0.18") 18.0 mm (0.71") 20.1 mm (0.79") 7.4 mm (0.29") 7.6 mm (0.30") 18.8 mm (0.74") SMBPVA5 SMBPVA10 SMBPVA13 SMBPVA16 35.6 mm (1.40") * Set of 2 heavy-duty protective brackets for PVA * PVA sensors * Cold-rolled plated steel L Model Used With "L" SMBPVA5 PVA100 139.7 mm SMBPVA10 PVA225 268.2 mm SMBPVA13 PVA300 343.3 mm SMBPVA16 PVA375 418.2 mm 19.3 mm (0.76") 752 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions 8.3 mm (0.33") SMBSP3 7.5 mm (0.30") 4 x M2 x 0.4 4 x o3.2 mm (0.126") 1.2 mm (0.05") * Right angle bracket * Stainless steel * SP3 * SP8 7.5 mm (0.30") 14.0 mm (0.55") 6.5 mm (0.26") 3.3 mm (0.13") 18.0 mm (0.71") 6.5 mm (0.26") 3.1 mm (0.12") 9.9 mm (0.39") SMBVS1S 1.7 mm (0.7") 4x R1.1 mm (0.44") 2x R5.6 mm (0.22") 6.5 mm (0.26") * Short bracket * 18-gauge stainless steel * VS1 12.5 mm (0.50") 2x 7.4 mm (0.29") 8x R1.6 mm (0.06") 2x R6.4 mm 22.0 mm (0.25") (0.87") 2x 1 mm (0.04") 2x 4.6 mm (0.18") 10.0 mm (0.40") 12.5 mm (0.49") 12.0 mm (0.47") 0.9 mm (0.04") 4x R4 mm (0.15") 25.0 mm (0.98") SMBVS1SC 2 x o2.8 mm (0.11") 10.0 mm (0.39") 4.7 mm (0.19") * Short bracket * 18-gauge stainless steel * VS1 11.0 mm (0.43") 13.5 mm (0.53") 4.5 mm 3.0 mm (0.18") (0.12") 0.9 mm (0.04") 2.0 mm (0.08") 5.5 mm (0.22") 2.3 mm (0.9") 9.0 mm (0.35") 19.5 mm (0.77") 12.5 mm (0.49") 8x R1.6 mm (0.06") SMBVS1T 2x R6.4 mm (0.25") 2x 7.6 mm (0.29") * Tall bracket * Stainless steel 10.2 mm (0.40") 4.6 mm (0.18") 25.0 mm (0.98") * VS1 22.0 mm (0.87") 13.5 mm (0.53") 4x R5.6 mm (0.22") 8x R1.1 mm (0.44") 10.8 mm (0.43") 13.5 mm (0.53") 32.0 mm (1.26") 0.9 mm (0.04") 5.6 mm (0.23") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 753 Accessories - Brackets Mounting Brackets Model Description Used with: Dimensions SMBVS1TC 4.5 mm (0.18") * Tall compact bracket * 300 Stainless steel * VS1 31.0 mm (1.22") 2x o2.8mm (0.11) 5.5 mm (0.22") 3.0 mm (0.12") 2.3 mm 3.0 mm (0.09") (0.12") 2.3 mm (0.9") 13.5 mm (0.53") 0.9 mm (0.04") 9.0 mm (0.35") 10.0 mm (0.39") 8.0 mm (0.32") SMBVS2RA 2x 3.2 mm (0.13") 3.0 mm (0.12") * Right-angle bracket * Stainless steel * VS2 7.0 mm (0.28") 5.5 mm (0.22") 8.0 mm (0.32") 3.0 mm (0.12") 8.0 mm (0.32") 0.9 mm (0.04") 20.0 mm (0.79") 9.0 mm (0.35") 20.0 mm (0.79") 14.0 mm (0.55") 4 x o2.3 mm (0.09") SMH241F 30.0 mm (1.18") * Nut strap replaces two M3 mounting nuts and washers * 16-gauge stainless steel 1.5 mm (0.06") * MINI-BEAM * Q23 * QM42/QMT42 24.0 mm (0.95") 2x M3 x 0.5 6.0 mm (0.24") 2x Full Radius 754 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - BEAM TRACKERTM BT-1 BEAM-TRACKER Wireless Photoelectric Diagnostics Sensor * * * * * * A quick and simple way to evaluate photoelectric system performance Receives light from all modulated photoelectric emitters and transmits light to receivers to check system operation Built-in high frequency emitter that will be detected by any Banner photoelectric receiver, as well as by those of most other photoelectric manufacturers A valuable tool for locating the center of the beam when installing long-range opposed mode photoelectric sensor pairs Locates sources of severe EMI or RFI "noise" Low cost, battery operated, and completely self-contained BT-1 BEAM TRACKER Specifications Model Number BT-1 Supply Voltage and Current 9V battery which provides about 10 hours of continuous use (or, typically hundreds of tests) Indicators Exclusive, patented Alignment Indicating Device system (AIDTM, US patent #4356393) which displays the relative strength of the light which it receives from a modulated source. When the receive button is depressed, an LED indicates the presence of a modulated light beam and flashes at a rate which corresponds directly to the beam's intensity. As a result, a suspected weak or failed light source is easily verified. Beam BEAM TRACKER emits a 70kHz modulated infrared beam Most modulated photoelectric receivers, if functioning properly, will respond to this beam at close range. Construction Housed in a rugged Cycolac T(R) case, which includes an aiming sight, plus a convenient mounting hole for a strap or cord. Totally self-contained. Application Notes In the receive mode, the BEAM TRACKER will respond to a severe level of electromagnetic or radio frequency interference. The path of the "noise" source can be traced by observing the flash rate of the BEAM TRACKER's Alignment Indicating Device. Cycolac(R) is a registered trademark of General Electric Co. BT-1 BEAM-TRACKER Features LED Indicator (includes AIDTM signal strength measurement system) Receiver Mode Button Depress and hold to: 1. Check operation of emitter 2. Track beam for receiver alignment 3. Track "noise" interference source Transmit Mode Button Depress and hold to check operation of a photoelectric receiver Remove (2) screws to replace battery Alignment Sight Receiver Lens Pickup area for "noise" tracking Emitter Lens Hole for cord or strap Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 755 Accessories - LAT-1 Laser Alignment Tool LAT-1 Laser Alignment Tool Visible Laser Device for Aligning Light Screen Systems * Totally self-contained visible-beam laser tool simplifies the alignment of any opposed-mode sensor pair * Uses one common 9-volt battery (included) * Built-in circular bubble level * Retroreflective target material included for easy viewing of the laser spot at long distances LAT-1 Laser Alignment Tool Specifications Supply Voltage and Current One standard 9V battery, included (replaceable); approximately 20 hours of continuous operation Sensing Beam Class 2 laser, 640-660 nm visible red IEC Pulse Width: 7s Rep rate: 30s Peak output power: 2.8 mW, 33kHz, 25% duty cycle Beam Size at Aperture Approximately 2 mm (0.08") diameter Beam Divergence 1.0 milliradian within specified temperature range 0.5 milliradians at room temperature Beam Placement Within 4 milliradians (approximately 0.25 degrees) of parallel to front, back, top and bottom of housing Construction Aluminum housing; black anodized finish Black polypropylene cover with flexible hinge for battery access Environmental Rating NEMA 1; IEC IP50 Operating Conditions Temperature: Maximum Relative Humidity: Laser Classification U.S. Safety Standards 21 CFR 1040.10 European Standards EN 60825-1:1994 0 to +40C (+32 to 104F) 90% @ +50C (non-condensing) LAT-1 Laser Alignment Tool Dimensions and Features LASER LIGHT LAT - 1 DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT. ON/OFF Switch Peak Power: 2.8mW, 640-660nm 33kHz 25% duty cycle COMPLIES WITH 21 CFR PART 1040.10 AND EN60825-1; 1994 AVOID EXPOSURE - LASER LIGHT EMITTED FROM THIS APERTURE REQUIRES ONE 9V BATTERY REMOVE TWO PHILLIPS SCREWS FOR BATTERY ACCESS BELOW LA DO 75 mm (3.0") SE NO Circular Bubble Level RL TS TA IGH R E IN T TO BEA M. kP CLA ow SS er: 2 LA 2.8 CO SER M 10 PLI 33kHmW, PR 40 ES OD .10 W z 25640UC AN ITH % du660n T. D EN 21 ty m AV 60 CFR cycl OID 82 PA e REM EM EX 5-1; R ITTE PO OVE 19 T D FRSUR TW 94 O PH OM E - LA TH SE ILLI IS R LI PS AP SC ER GHT REW TU RE S FO R BA TT ER Y AC CE SS BE LO Pea LA T- RE Emitter Centerline 1 QU IRE S ON E 9V B AT TE RY 40 mm (1.6") W 75 mm (3.0") 756 21 mm (0.8") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - DBQ5 Demo Box DBQ5 Portable Demo Box * * * * * * Used to power dc self-contained photoelectric sensors for testing purposes Designed around the 4-pin euro-style connector Powered by three standard 9V batteries (27V dc) for very long service life Features bi-color LEDs which indicate not only sensor output status, but also output type (NPN or PNP) Cable adapters are available to convert to pico-style or ministyle connectors A 4-pin wiring barrier is mounted on the top of the box to allow connection of cabled dc sensors Demo Box Model Dimensions DBQ5 114 mm wide x 62 mm deep x 47 mm high (4.5" x 2.4" x 1.9") Cable Adapters Part Number Type Used for: 39536 Euro-to-pico D11, D12, Q23, S12, MINI-BEAM2 and PICO-AMP series sensors 39537 Euro-to-mini VALU-BEAM, Q45 series, SM30 dc series OPTO-TOUCH and OMNI-BEAM sensors Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 757 Accessories - SPS100 DC Sensor Power Supply SPS100 DC Sensor Power Supply * Converts 120V ac line voltage to low voltage dc for powering any Banner dc sensor which has either 4- or 5-pin Euro-style quick-disconnect (QD) * SPS100 models include 5 amp-rated SPDT relay for switching ac loads or large dc loads * SPS100S models include an optically-isolated SPST solidstate output for switching ac or dc loads * Models with "Q" suffix require a sensor with a pigtail QD connector; models with "QP" suffix connect to a sensor with either an integral or pigtail quick-disconnect Note: SPS power supplies are not for use with NAMUR sensors or personal safety products. SPS100 Sensor Power Supply Models Model Supply Voltage Sensor Connection SPS100Q 5-pin Euro-style QD* SPS100QP 5-pin Pigtail Euro-style QD SPS100SQ 105-130V ac 60 Hz SPS100SQP Supply/Output Cable Output Type 5-pin Mini QD "Form C" (SPDT) electromechanical relay (see specifications for rating information) 4-pin Mini QD SPST Optically-isolated solid-state switch (see specifications for rating information) 5-pin Euro-style QD* 5-pin Pigtail Euro-style QD *Requires 4- or 5-pin Pigtail Euro QD on sensor. SPS100 Sensor Power Supply Dimensions Model Suffix "Q" Model Suffix "QP" 5-pin female Euro-style QD connector 5-pin female Euro-style QD connector 50.0 mm (1.97") 48.8 mm (1.92") 500 mm (19.7") pigtail cable 132.5 mm (5.20") 107.4 mm (4.23") 142.5 mm (5.61") 89.9 mm (3.54") Output Indicator Power Indicator 64.5 mm (2.54") 45.0 mm (1.77") o 38.1 mm (1.50") 14 mm (0.6") M5 (#10) Screw Clearance (2) Threaded Base M30 x 1.5 Mini-Style QD Connector 758 4.8 mm (0.19") 40.1 mm (1.58") Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories - SPS100 DC Sensor Power Supply SPS100 Sensor Power Supply Specifications Supply Voltage 105V ac to 130V ac, 60Hz Output Power 120mA maximum: 12V dc minimum, 30V dc maximum (dependent on load) Output Configuration SPS100Q(P) models: "Form C" (SPDT) electromechanical relay SPS100SQ(P) models: Optically isolated SPST solid-state switch Output Rating SPS100Q(P) models: Max. switching power (resistive load) = 150 W, 600 VA Max. switching voltage (resistive load) = 250V ac or 30 V dc (120V ac max. per UL & CSA) Max. switching current (resistive load) = 5A Min.. voltage and current = 1 amp at 5V dc, 0.1 amp at 24V dc Peak switching voltage = 750V ac (transient suppression recommended) Mechanical life of relay = 10,000,000 operations SPS100SQ(P) models: Max. switching voltage = 250V ac or 250V dc Max. switching current = 150mA at 25C, derated to 80 mA at 50C On-state saturation voltage = less than 3V at 150 mA; less than 1V at 10 mA Status Indicators Power On (green) and Output On (red) Connections Power connector: SPS100Q(P) models: 5-pin Mini-style quick disconnect SPS100SQ(P) models: 4-pin Mini-style quick disconnect Sensor connector: "Q" version: 5-pin Euro-style quick-disconnect mounted on housing "QP" version: PVC jacketed 5-pin pigtail Euro-style quick-disconnect 0.5 meter long Environmental Rating IEC IP54 Operating Conditions Temperature: Maximum Relative Humidity: Additional Notes Compatible with Banner dc sensors with NPN or PNP output, equipped with 4- or 5-pin Euro-style quickdisconnect (except NAMUR sensors). Model SPS100Q: connects only to sensors equipped with a pigtail Euro-style quick-disconnect Model SPS100QP: connects to sensors equipped with either a pigtail or sensor-mounted Euro-style quick-disconnect Model SPS100SQ: connects only to sensors equipped with a pigtail Euro-style quick-disconnect Model SPS100SQP: connects to sensors equipped with either a pigtail or sensor-mounted Euro-style quick-disconnect -20 to +50C (-20 to 122F) 90% @ +50C (non-condensing) SPS100 Sensor Power Supply Hookups SPS100 Mechanical Relay SPS100 Solid-State Relay bn bu wh ye bk bn bu 105-130V ac NC bk C wh 105-130V ac Isolated Solid State SPST Switch NO Quick-Disconnect (QD) Cables Following is the selection of cables available for SPS100 models. See the Accessories on page 726 for more information. Style Model Length Connector Used with: 4-Pin Mini MBCC-406 MBCC-412 MBCC-430 2 m (6.5') 4 m (12') 9 m (30') Straight SPS100SQ, SPS100SQP 5-Pin Mini MBCC-506 MBCC-512 MBCC-530 2 m (6.5') 4 m (12') 9 m (30') Straight SPS100Q, SPS100QP Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 759 Accessories NOTES: 760 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 Accessories NOTES: Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164 761 Accessories NOTES: 762 Banner Engineering Corp. * Minneapolis, U.S.A. * www.bannerengineering.com * Tel: 763.544.3164