2859738 - Phoenix Contact - Product.Network

PHOENIX CONTACT Deutschland GmbH Page 1 / 7

http://www.phoenixcontact.de Feb 4, 2011

Extract from the online

catalog



FLT-CP-1S-350

Order No.: 2859738

http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738



Pluggable lightning current and surge arrester combination, in acc.

with typ 1+2 / Class I+II / B+C arresters. Arresters coordinated

following the AEC principle, for 1-phase power supply networks with

separately installed PE and N (L1, PE, N).



Commercial data

GTIN (EAN)

4 017918 956455

sales group J000

Pack 1 pcs.

Customs tariff 85363030

Catalog page information Page 23 (TT-2009)

Product notes

WEEE/RoHS-compliant since:

05/10/2006

http://

www.download.phoenixcontact.com

Please note that the data given

here has been taken from the

online catalog. For comprehensive

information and data, please refer

to the user documentation. The

General Terms and Conditions of

Use apply to Internet downloads.

Technical data

Standards

Housing material PBT

Inflammability class acc. to UL 94 V0

Color gray

FLT-CP-1S-350 Order No.: 2859738

http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738

PHOENIX CONTACT Deutschland GmbH Page 2 / 7

http://www.phoenixcontact.de Feb 4, 2011

Standards for air and creepage distances DIN VDE 0110-1

IEC 60664-1: 1992-10

IEC 61643-1

Surge voltage category III

Pollution degree 2

Degree of protection IP20

Mounting type DIN rail: 35 mm

Design DIN rail module, two-section, divisible

Number of positions 2

Ambient temperature (operation) -40 °C ... 80 °C

Arrester can be tested with CHECKMASTER from

software version:

From SW rev. 3.00

Message: Surge protection fault Optical, remote indicator contact

Direction of action 1L-N & N-PE

Width 71.60 mm

Height 70.00 mm

Length 95.80 mm

Pitch unit 4 Div.

Protective circuit

IEC category I + II

T1 + T2

EN type T1 + T2

Lightning protection class III-IV /50 kA (TT, TN-C-S)

Nominal voltage UN240 V AC (230 V AC ... 240 V AC)

Arrester rated voltage UC (L-N) 350 V AC

Arrester rated voltage UC (N-PE) 350 V AC

UT (TOV-proof) ≤ 415 V AC (5 s / L-N)

UT (TOV-safe) ≤ 1200 V AC (200 ms / N-PE)

Nominal frequency fN50 Hz (60 Hz)

Nominal load current IL125 A (≤ 55°C)

Ground conductor current IPE ≤ 5 µA

Standby power consumption PC≤ 3.5 mW

Nominal discharge surge current In (8/20) µs (L-N) 25 kA

Nominal discharge surge current In (8/20) µs (N-

PE)

100 kA

FLT-CP-1S-350 Order No.: 2859738

http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738

PHOENIX CONTACT Deutschland GmbH Page 3 / 7

http://www.phoenixcontact.de Feb 4, 2011

Lightning test current (10/350) µs, charge 25 As

Lightning test current (10/350) µs, specific energy 625.00 kJ/Ω

Lightning test current (10/350) µs, peak value limp 50 kA

Lightning test current (10/350) µs, charge 50 As

Lightning test current (10/350) µs, specific energy 2.50 MJ/Ω

Lightning test current (10/350) µs, peak value limp 100 kA (N-PE)

Impulse operate voltage at 6 kV (1.2/50)µs (N-PE) ≤ 1.5 kV

Protection level UP (L-N) ≤ 1.5 kV

Protection level UP (N-PE) ≤ 1.5 kV

Residual voltage (L-N) ≤ 1.3 kV (at In)

≤ 1.1 kV (at 10 kA)

≤ 1 kV (at 5 kA)

≤ 1 kV (at 3 kA)

Residual voltage (L-PE) ≤ 2.2 kV (at In)

≤ 2 kV (at 10 kA)

≤ 1.8 kV (at 5 kA)

≤ 1.6 kV (at 3 kA)

Residual voltage (N-PE) ≤ 1.5 kV (at In)

≤ 1 kV (at 10 kA)

≤ 0.9 kV (at 5 kA)

≤ 0.8 kV (at 3 kA)

Clamping voltage SVR (L-N) ≤ 0.9 kV

Clamping voltage SVR (L-PE) ≤ 1.5 kV

Clamping voltage SVR (N-PE) ≤ 1.5 kV

Response time (L-N) ≤ 25 ns

Response time (L-PE) ≤ 100 ns

Response time (N-PE) ≤ 100 ns

Max. required backup fuse with branch wiring 315 A (gL/gG)

Max. required backup fuse with V-type through

wiring

125 A (gL/gG)

Recommended backup fuse maximum 160 A (gL/gG, 125 A with serial through wiring)

Short-circuit resistance IP with max. backup fuse

(effective)

25 kA

Short-circuit current self-quenching 100 A (effective (N-PE))

Follow current quenching capacity If 100 A (350 V AC (N-PE))

FLT-CP-1S-350 Order No.: 2859738

http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738

PHOENIX CONTACT Deutschland GmbH Page 4 / 7

http://www.phoenixcontact.de Feb 4, 2011

Follow current quenching capacity If (L-N) 25 kA (264 V AC)

3 kA (350 V AC)

Follow current quenching capacity If (N-PE) 100 A

Connection, protective circuit

Type of connection Screw terminal blocks

Connection type IN Biconnect screw terminal block

Connection type OUT Biconnect screw terminal block

Connection method Biconnect terminal block

Screw thread M5

Tightening torque 4.5 Nm

Stripping length 18 mm

Conductor cross section stranded min. 2.5 mm²

Conductor cross section stranded max. 25 mm²

Conductor cross section solid min. 2.5 mm²

Conductor cross section solid max. 35 mm²

Conductor cross section AWG/kcmil min. 13

Conductor cross section AWG/kcmil max 2

Remote indicator contact

Connection name Remote fault indicator contact

Switching function PDT contact

Type of connection Plug-in/screw connection via COMBICON

Screw thread M2

Tightening torque 0.25 Nm

Stripping length 7 mm

Conductor cross section stranded min. 0.14 mm²

Conductor cross section stranded max. 1.5 mm²

Conductor cross section solid min. 0.14 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section AWG/kcmil min. 28

Conductor cross section AWG/kcmil max 16

Maximum operating voltage Umax. AC 250 V AC

Maximum operating voltage Umax DC 125 V DC

FLT-CP-1S-350 Order No.: 2859738

http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738

PHOENIX CONTACT Deutschland GmbH Page 5 / 7

http://www.phoenixcontact.de Feb 4, 2011

Max. operating current Imax 1 A AC (inductive)

1 A AC (ohmic)

30 mA DC (inductive)

200 mA DC (ohmic)

Environmental conditions

Standards/regulations IEC 61643-1

EN 61643-11

UL 1449

Certificates / Approvals

Certification CB, CCA, CUL, GOST, KEMA, UL

Accessories

Item Designation Description

General

2859686 FLT-CP-N/PE-350-ST Type 1 / Class I / B arrester (lightning arrester) replacement plug

for path N-PE, can be combined with FLASHTRAB compact

series of products.

2859602 VAL-CP-350-ST Type 2 arrester replacement plug (surge arrester) with high-

capacity varistor with low leakage current.

Marking

1051993 B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-

proof and waterproof, line thickness 0.5 mm

0803595 ZBFM 5/WH:UNBEDRUCKT Zack marker sheet, flat, unprinted: 120-section, 10 strips à 12

markers, sufficient for 120 terminal blocks, for all terminal blocks,

pitch 5.2 mm, labeling with M-PEN or CMS system, color: white

2749589 ZBN 18,LGS:ERDE Marking labels, printed horizontally, strips with 5 labels, GND

(grounding symbol), color: White

2749576 ZBN 18,LGS:L1-N,ERDE Marker labels, printed horizontally, strips with 5 labels, L1, L2, L3,

N, GND, color: white

0800763 ZBN 18:SO/CMS Marker labels, 5-section, special printing, labeled according to

customer requirements (Please specify the required marking with

order), for terminal width: 17.5 mm, color: White

FLT-CP-1S-350 Order No.: 2859738

http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738

PHOENIX CONTACT Deutschland GmbH Page 6 / 7

http://www.phoenixcontact.de Feb 4, 2011

2809128 ZBN 18:UNBEDRUCKT Unprinted marker labels, strips with 5 labels for individual labeling

with M-PEN or CMS system, for terminal block width: 17.5 mm,

color: White

Diagrams/Drawings

Dimensioned drawing

Circuit diagram

FLT-CP-1S-350 Order No.: 2859738

http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738

PHOENIX CONTACT Deutschland GmbH Page 7 / 7

http://www.phoenixcontact.de Feb 4, 2011

Address

PHOENIX CONTACT Deutschland GmbH

Flachsmarktstr. 8

32825 Blomberg,Germany

Phone +49 5235 3 12000

Fax +49 5235 3 41200

http://www.phoenixcontact.de

Technical modifications reserved;