Extract from the online catalog FLT-CP-1S-350 Order No.: 2859738 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738 Pluggable lightning current and surge arrester combination, in acc. with typ 1+2 / Class I+II / B+C arresters. Arresters coordinated following the AEC principle, for 1-phase power supply networks with separately installed PE and N (L1, PE, N). Product notes WEEE/RoHS-compliant since: 05/10/2006 Commercial data GTIN (EAN) 4 017918 956455 sales group J000 Pack 1 pcs. Customs tariff 85363030 Catalog page information Page 23 (TT-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Standards Housing material PBT Inflammability class acc. to UL 94 V0 Color gray PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 7 Feb 4, 2011 FLT-CP-1S-350 Order No.: 2859738 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738 Standards for air and creepage distances DIN VDE 0110-1 IEC 60664-1: 1992-10 IEC 61643-1 Surge voltage category III Pollution degree 2 Degree of protection IP20 Mounting type DIN rail: 35 mm Design DIN rail module, two-section, divisible Number of positions 2 Ambient temperature (operation) -40 C ... 80 C Arrester can be tested with CHECKMASTER from software version: From SW rev. 3.00 Message: Surge protection fault Optical, remote indicator contact Direction of action 1L-N & N-PE Width 71.60 mm Height 70.00 mm Length 95.80 mm Pitch unit 4 Div. Protective circuit IEC category I + II T1 + T2 EN type T1 + T2 Lightning protection class III-IV /50 kA (TT, TN-C-S) Nominal voltage UN 240 V AC (230 V AC ... 240 V AC) Arrester rated voltage UC (L-N) 350 V AC Arrester rated voltage UC (N-PE) 350 V AC UT (TOV-proof) 415 V AC (5 s / L-N) UT (TOV-safe) 1200 V AC (200 ms / N-PE) Nominal frequency fN 50 Hz (60 Hz) Nominal load current IL 125 A ( 55C) Ground conductor current IPE 5 A Standby power consumption PC 3.5 mW Nominal discharge surge current In (8/20) s (L-N) 25 kA Nominal discharge surge current In (8/20) s (NPE) 100 kA PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 7 Feb 4, 2011 FLT-CP-1S-350 Order No.: 2859738 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738 Lightning test current (10/350) s, charge 25 As Lightning test current (10/350) s, specific energy 625.00 kJ/ Lightning test current (10/350) s, peak value limp 50 kA Lightning test current (10/350) s, charge 50 As Lightning test current (10/350) s, specific energy 2.50 MJ/ Lightning test current (10/350) s, peak value limp 100 kA (N-PE) Impulse operate voltage at 6 kV (1.2/50)s (N-PE) 1.5 kV Protection level UP (L-N) 1.5 kV Protection level UP (N-PE) 1.5 kV Residual voltage (L-N) 1.3 kV (at In) 1.1 kV (at 10 kA) 1 kV (at 5 kA) 1 kV (at 3 kA) Residual voltage (L-PE) 2.2 kV (at In) 2 kV (at 10 kA) 1.8 kV (at 5 kA) 1.6 kV (at 3 kA) Residual voltage (N-PE) 1.5 kV (at In) 1 kV (at 10 kA) 0.9 kV (at 5 kA) 0.8 kV (at 3 kA) Clamping voltage SVR (L-N) 0.9 kV Clamping voltage SVR (L-PE) 1.5 kV Clamping voltage SVR (N-PE) 1.5 kV Response time (L-N) 25 ns Response time (L-PE) 100 ns Response time (N-PE) 100 ns Max. required backup fuse with branch wiring 315 A (gL/gG) Max. required backup fuse with V-type through wiring 125 A (gL/gG) Recommended backup fuse maximum 160 A (gL/gG, 125 A with serial through wiring) Short-circuit resistance IP with max. backup fuse (effective) 25 kA Short-circuit current self-quenching 100 A (effective (N-PE)) Follow current quenching capacity If 100 A (350 V AC (N-PE)) PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 7 Feb 4, 2011 FLT-CP-1S-350 Order No.: 2859738 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738 Follow current quenching capacity If (L-N) 25 kA (264 V AC) 3 kA (350 V AC) Follow current quenching capacity If (N-PE) 100 A Connection, protective circuit Type of connection Screw terminal blocks Connection type IN Biconnect screw terminal block Connection type OUT Biconnect screw terminal block Connection method Biconnect terminal block Screw thread M5 Tightening torque 4.5 Nm Stripping length 18 mm Conductor cross section stranded min. 2.5 mm Conductor cross section stranded max. 25 mm Conductor cross section solid min. 2.5 mm Conductor cross section solid max. 35 mm Conductor cross section AWG/kcmil min. 13 Conductor cross section AWG/kcmil max 2 Remote indicator contact Connection name Remote fault indicator contact Switching function PDT contact Type of connection Plug-in/screw connection via COMBICON Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section stranded min. 0.14 mm Conductor cross section stranded max. 1.5 mm Conductor cross section solid min. 0.14 mm Conductor cross section solid max. 1.5 mm Conductor cross section AWG/kcmil min. 28 Conductor cross section AWG/kcmil max 16 Maximum operating voltage Umax. AC 250 V AC Maximum operating voltage Umax DC 125 V DC PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 7 Feb 4, 2011 FLT-CP-1S-350 Order No.: 2859738 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738 Max. operating current Imax 1 A AC (inductive) 1 A AC (ohmic) 30 mA DC (inductive) 200 mA DC (ohmic) Environmental conditions Standards/regulations IEC 61643-1 EN 61643-11 UL 1449 Certificates / Approvals Certification CB, CCA, CUL, GOST, KEMA, UL Accessories Item Designation Description 2859686 FLT-CP-N/PE-350-ST Type 1 / Class I / B arrester (lightning arrester) replacement plug for path N-PE, can be combined with FLASHTRAB compact series of products. 2859602 VAL-CP-350-ST Type 2 arrester replacement plug (surge arrester) with highcapacity varistor with low leakage current. 1051993 B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smearproof and waterproof, line thickness 0.5 mm 0803595 ZBFM 5/WH:UNBEDRUCKT Zack marker sheet, flat, unprinted: 120-section, 10 strips a 12 markers, sufficient for 120 terminal blocks, for all terminal blocks, pitch 5.2 mm, labeling with M-PEN or CMS system, color: white 2749589 ZBN 18,LGS:ERDE Marking labels, printed horizontally, strips with 5 labels, GND (grounding symbol), color: White 2749576 ZBN 18,LGS:L1-N,ERDE Marker labels, printed horizontally, strips with 5 labels, L1, L2, L3, N, GND, color: white 0800763 ZBN 18:SO/CMS Marker labels, 5-section, special printing, labeled according to customer requirements (Please specify the required marking with order), for terminal width: 17.5 mm, color: White General Marking PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 7 Feb 4, 2011 FLT-CP-1S-350 Order No.: 2859738 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738 2809128 ZBN 18:UNBEDRUCKT Unprinted marker labels, strips with 5 labels for individual labeling with M-PEN or CMS system, for terminal block width: 17.5 mm, color: White Diagrams/Drawings Dimensioned drawing Circuit diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 6 / 7 Feb 4, 2011 FLT-CP-1S-350 Order No.: 2859738 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859738 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de (c) 2011 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 7 / 7 Feb 4, 2011