DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 1Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wet Tantalum Capacitors, Space Level, Established Reliability,
DSCC Drawings 06013, 06014, 06015, 06016
FEATURES
• Screened for space level applications
• Tantalum case, hermetically sealed, axial leaded
• Screened M39006/22/25/30/31 capacitors
- “R” or 0.001 %/1000 failure rate
- “H” or high shock and vibration rated
- Enhanced 100 % or group A testing
- Enhanced production lot testing - group b prior to
shipment
• Stability
• Thermal shock
• 1000 h life at +85 °C
Established Reliability “Space Level” Wet Tantalum Capacitors
In accordance with the DSCC drawings, all parts are up-screened from “R” failure rate, “H” characteristic,
MIL-PRF-39006/22/25/30/31 capacitors. Parts are marked with the appropriate DSCC drawing number and PIN (dash number).
For information on the exact performance of these capacitors, please refer to the latest issue of the DSCC drawing and
appropriate military specification.
CROSS REFERENCE
DSCC DRAWING MIL SPECIFICATION STYLE
DSCC 06013 M39006/22 CLR79
DSCC 06014 M39006/25 CLR81
DSCC 06015 M39006/30 CLR90
DSCC 06016 M39006/31 CLR91
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 2Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Material in this section has been abstracted from DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016.
ORDERING INFORMATION
0601X XXXXH
DSCC DRAWING NUMBER PIN OR DASH NUMBER
Indicates the basic
specification; in this case
MIL-PRF-39006
(see Standard Ratings tables)
DIMENSIONS in inches [millimeters]
CASE
CODE
BARE CASE WITH INSULATING
SLEEVE E
LEAD LENGTH
WEIGHT
(oz./g)
(Max.)
D L D (Max.) L (Max.)
T1 0.188 ± 0.016
[4.78 ± 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.219
[5.56]
0.515
[13.08]
1.500 ± 0.250
[38.10 ± 6.35]
0.09
[2.6]
T2 0.281 ± 0.016
[7.14 ± 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
0.312
[7.92]
0.704
[17.88]
2.250 ± 0.250
[57.15 ± 6.35]
0.22
[6.2]
T3 0.375 ± 0.016
[9.53 ± 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
0.406
[10.31]
0.828
[21.03]
2.250 ± 0.250
[57.15 ± 6.35]
0.41
[11.6]
T4 0.375 ± 0.016
[9.53 ± 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
0.406
[10.31]
1.126
[28.60]
2.250 ± 0.250
[57.15 ± 6.35]
0.62
[17.7]
ELE
-+
Tantalum feed-through
0.078 [1.98] max. dia. Term. loc. within
0.031 [0.79] r.
of true position
Glass
0.025 ± 0.002
[0.64 ± 0.05]
External
weld
Terminal
welded
to case
DSCC 06013 (CLR79 style)
DSCC 06014 (CLR81 style)
DSCC 06015 (CLR90 style)
DSCC 06016 (CLR91 style)
Insulating sleeve
Case
Circuit diagram
D dia.
0.250 [6.35] max.
0.094 [2.38]
max.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 3Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS: DSCC 06013
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06013 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
6 VDC AT +85 °C; 4 VDC AT +125 °C
30 T1 20 0441H 1.0 2.0 9 100 -40 +10.5 +12 820
30 T1 10 0442H 1.0 2.0 9 100 -40 +10.5 +12 820
30 T1 5 0443H 1.0 2.0 9 100 -40 +10.5 +12 820
68 T1 20 0444H 1.0 2.0 15 60 -40 +14 +16 960
68 T1 10 0445H 1.0 2.0 15 60 -40 +14 +16 960
68 T1 5 0446H 1.0 2.0 15 60 -40 +14 +16 960
140 T2 20 0447H 1.0 3.0 21 40 -40 +14 +16 1200
140 T2 10 0448H 1.0 3.0 21 40 -40 +14 +16 1200
140 T2 5 0449H 1.0 3.0 21 40 -40 +14 +16 1200
270 T2 20 0450H 1.0 6.5 45 25 -44 +17.5 +20 1375
270 T2 10 0451H 1.0 6.5 45 25 -44 +17.5 +20 1375
270 T2 5 0452H 1.0 6.5 45 25 -44 +17.5 +20 1375
330 T3 20 0453H 2.0 7.9 36 20 -44 +14 +16 1800
330 T3 10 0454H 2.0 7.9 36 20 -44 +14 +16 1800
330 T3 5 0455H 2.0 7.9 36 20 -44 +14 +16 1800
560 T3 20 0456H 2.0 13.0 55 25 -64 +17.5 +20 1900
560 T3 10 0457H 2.0 13.0 55 25 -64 +17.5 +20 1900
560 T3 5 0458H 2.0 13.0 55 25 -64 +17.5 +20 1900
1200 T4 20 0459H 3.0 14.0 90 20 -80 +25 +25 2265
1200 T4 10 0460H 3.0 14.0 90 20 -80 +25 +25 2265
8 VDC AT +85 °C; 5 VDC AT +125 °C
25 T1 20 0461H 1.0 2.0 7.5 100 -40 +10.5 +12 820
25 T1 10 0462H 1.0 2.0 7.5 100 -40 +10.5 +12 820
25 T1 5 0463H 1.0 2.0 7.5 100 -40 +10.5 +12 820
56 T1 20 0464H 1.0 2.0 14 59 -40 +14 +16 900
56 T1 10 0465H 1.0 2.0 14 59 -40 +14 +16 900
56 T1 5 0466H 1.0 2.0 14 59 -40 +14 +16 900
120 T2 20 0467H 1.0 2.0 20 50 -44 +17.5 +20 1220
120 T2 10 0468H 1.0 2.0 20 50 -44 +17.5 +20 1220
120 T2 5 0469H 1.0 2.0 20 50 -44 +17.5 +20 1220
220 T2 20 0470H 1.0 7.0 37 30 -44 +17.5 +20 1370
220 T2 10 0471H 1.0 7.0 37 30 -44 +17.5 +20 1370
220 T2 5 0472H 1.0 7.0 37 30 -44 +17.5 +20 1370
290 T3 20 0473H 2.0 6.0 34 25 -64 +17.5 +20 1770
290 T3 10 0474H 2.0 6.0 34 25 -64 +17.5 +20 1770
290 T3 5 0475H 2.0 6.0 34 25 -64 +17.5 +20 1770
430 T3 20 0476H 2.0 14.0 46 25 -64 +17.5 +20 1825
430 T3 10 0477H 2.0 14.0 46 25 -64 +17.5 +20 1825
430 T3 5 0478H 2.0 14.0 46 25 -64 +17.5 +20 1825
850 T4 20 0479H 4.0 16.0 60 22 -80 +25 +25 2330
850 T4 10 0480H 4.0 16.0 60 22 -80 +25 +25 2330
10 VDC AT+85 °C; 7 VDC AT +125 °C
20 T1 20 0481H 1.0 2.0 6 175 -32 +10.5 +12 820
20 T1 10 0482H 1.0 2.0 6 175 -32 +10.5 +12 820
20 T1 5 0483H 1.0 2.0 6 175 -32 +10.5 +12 820
47 T1 20 0484H 1.0 2.0 13 100 -36 +14 +16 855
47 T1 10 0485H 1.0 2.0 13 100 -36 +14 +16 855
47 T1 5 0486H 1.0 2.0 13 100 -36 +14 +16 855
100 T2 20 0487H 1.0 4.0 15 60 -36 +14 +16 1200
100 T2 10 0488H 1.0 4.0 15 60 -36 +14 +16 1200
100 T2 5 0489H 1.0 4.0 15 60 -36 +14 +16 1200
180 T2 20 0490H 1.0 7.0 30 40 -36 +14 +16 1365
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 4Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT+85 °C; 7 VDC AT +125 °C
180 T2 10 0491H 1.0 7.0 30 40 -36 +14 +16 1365
180 T2 5 0492H 1.0 7.0 30 40 -36 +14 +16 1365
250 T3 20 0493H 2.0 10.0 30 30 -40 +14 +16 1720
250 T3 10 0494H 2.0 10.0 30 30 -40 +14 +16 1720
250 T3 5 0495H 2.0 10.0 30 30 -40 +14 +16 1720
390 T3 20 0496H 2.0 16.0 44 25 -64 +17.5 +20 1800
390 T3 10 0497H 2.0 16.0 44 25 -64 +17.5 +20 1800
390 T3 5 0498H 2.0 16.0 44 25 -64 +17.5 +20 1800
750 T4 20 0499H 4.0 16.0 50 23 -80 +25 +25 2360
750 T4 10 0500H 4.0 16.0 50 23 -80 +25 +25 2360
15 VDC AT +85 °C; 10 VDC AT +125 °C
15 T1 20 0501H 1.0 2.0 5 155 -24 +10.5 +12 780
15 T1 10 0502H 1.0 2.0 5 155 -24 +10.5 +12 780
15 T1 5 0503H 1.0 2.0 5 155 -24 +10.5 +12 780
33 T1 20 0504H 1.0 2.0 10 90 -28 +14 +16 820
33 T1 10 0505H 1.0 2.0 10 90 -28 +14 +16 820
33 T1 5 0506H 1.0 2.0 10 90 -28 +14 +16 820
70 T2 20 0507H 1.0 4.0 13 75 -28 +14 +16 1150
70 T2 10 0508H 1.0 4.0 13 75 -28 +14 +16 1150
70 T2 5 0509H 1.0 4.0 13 75 -28 +14 +16 1150
120 T2 20 0510H 1.0 7.0 18 50 -28 +17.5 +20 1450
120 T2 10 0511H 1.0 7.0 18 50 -28 +17.5 +20 1450
120 T2 5 0512H 1.0 7.0 18 50 -28 +17.5 +20 1450
170 T3 20 0513H 2.0 10.0 25 35 -32 +14 +16 1480
170 T3 10 0514H 2.0 10.0 25 35 -32 +14 +16 1480
170 T3 5 0515H 2.0 10.0 25 35 -32 +14 +16 1480
270 T3 20 0516H 2.0 16.0 32 30 -56 +17.5 +20 1740
270 T3 10 0517H 2.0 16.0 32 30 -56 +17.5 +20 1740
270 T3 5 0518H 2.0 16.0 32 30 -56 +17.5 +20 1740
540 T4 20 0519H 6.0 24.0 40 23 -80 +25 +25 2330
540 T4 10 0520H 6.0 24.0 40 23 -80 +25 +25 2330
25 VDC AT +85 °C; 15 VDC AT +125 °C
10 T1 20 0521H 1.0 2.0 4 220 -16 +8 +9 715
10 T1 10 0522H 1.0 2.0 4 220 -16 +8 +9 715
10 T1 5 0523H 1.0 2.0 4 220 -16 +8 +9 715
22 T1 20 0524H 1.0 2.0 6.6 140 -20 +10.5 +12 825
22 T1 10 0525H 1.0 2.0 6.6 140 -20 +10.5 +12 825
22 T1 5 0526H 1.0 2.0 6.6 140 -20 +10.5 +12 825
50 T2 20 0527H 1.0 2.0 11.0 70 -28 +13 +15 1130
50 T2 10 0528H 1.0 2.0 11.0 70 -28 +13 +15 1130
50 T2 5 0529H 1.0 2.0 11.0 70 -28 +13 +15 1130
100 T2 20 0530H 1.0 10.0 15 50 -28 +13 +15 1435
100 T2 10 0531H 1.0 10.0 15 50 -28 +13 +15 1435
100 T2 5 0532H 1.0 10.0 15 50 -28 +13 +15 1435
120 T3 20 0533H 2.0 6.0 21 38 -32 +13 +15 1450
120 T3 10 0534H 2.0 6.0 21 38 -32 +13 +15 1450
120 T3 5 0535H 2.0 6.0 21 38 -32 +13 +15 1450
180 T3 20 0536H 2.0 18.0 26 32 -48 +13 +15 1525
180 T3 10 0537H 2.0 18.0 26 32 -48 +13 +15 1525
180 T3 5 0538H 2.0 18.0 26 32 -48 +13 +15 1525
350 T4 20 0539H 7.0 28.0 35 24 -70 +25 +25 1970
350 T4 10 0540H 7.0 28.0 35 24 -70 +25 +25 1970
STANDARD RATINGS: DSCC 06013
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06013 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 5Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
30 VDC AT +85 °C; 20 VDC AT +125 °C
8.0 T1 20 0541H 1.0 2.0 4 275 -16 +8 +12 640
8.0 T1 10 0542H 1.0 2.0 4 275 -16 +8 +12 640
8.0 T1 5 0543H 1.0 2.0 4 275 -16 +8 +12 640
15 T1 20 0544H 1.0 2.0 5 175 -20 +10.5 +12 780
15 T1 10 0545H 1.0 2.0 5 175 -20 +10.5 +12 780
15 T1 5 0546H 1.0 2.0 5 175 -20 +10.5 +12 780
40 T2 20 0547H 1.0 5.0 10 65 -24 +10.5 +12 1120
40 T2 10 0548H 1.0 5.0 10 65 -24 +10.5 +12 1120
40 T2 5 0549H 1.0 5.0 10 65 -24 +10.5 +12 1120
68 T2 20 0550H 1.0 8.0 13 60 -24 +13 +15 1285
68 T2 10 0551H 1.0 8.0 13 60 -24 +13 +15 1285
68 T2 5 0552H 1.0 8.0 13 60 -24 +13 +15 1285
100 T3 20 0553H 2.0 12.0 17 40 -28 +10.5 +12 1450
100 T3 10 0554H 2.0 12.0 17 40 -28 +10.5 +12 1450
100 T3 5 0555H 2.0 12.0 17 40 -28 +10.5 +12 1450
150 T3 20 0556H 2.0 18.0 23 35 -48 +13 +15 1525
150 T3 10 0557H 2.0 18.0 23 35 -48 +13 +15 1525
150 T3 5 0558H 2.0 18.0 23 35 -48 +13 +15 1525
300 T4 20 0559H 8.0 32.0 31 25 -60 +25 +25 1950
300 T4 10 0560H 8.0 32.0 31 25 -60 +25 +25 1950
50 VDC AT +85 °C; 30 VDC AT +125 °C
5.0 T1 20 0561H 1.0 2.0 3 400 -16 +5 +6 580
5.0 T1 10 0562H 1.0 2.0 3 400 -16 +5 +6 580
5.0 T1 5 0563H 1.0 2.0 3 400 -16 +5 +6 580
10 T1 20 0564H 1.0 2.0 4 250 -24 +8 +9 715
10 T1 10 0565H 1.0 2.0 4 250 -24 +8 +9 715
10 T1 5 0566H 1.0 2.0 4 250 -24 +8 +9 715
25 T2 20 0567H 1.0 5.0 8 95 -20 +10.5 +12 1005
25 T2 10 0568H 1.0 5.0 8 95 -20 +10.5 +12 1005
25 T2 5 0569H 1.0 5.0 8 95 -20 +10.5 +12 1005
47 T2 20 0570H 1.0 9.0 11 70 -28 +13 +15 1155
47 T2 10 0571H 1.0 9.0 11 70 -28 +13 +15 1155
47 T2 5 0572H 1.0 9.0 11 70 -28 +13 +15 1155
60 T3 20 0573H 2.0 12.0 12 45 -16 +10.5 +12 1335
60 T3 10 0574H 2.0 12.0 12 45 -16 +10.5 +12 1335
60 T3 5 0575H 2.0 12.0 12 45 -16 +10.5 +12 1335
82 T3 20 0576H 2.0 16.0 15 45 -32 +13 +15 1400
82 T3 10 0577H 2.0 16.0 15 45 -32 +13 +15 1400
82 T3 5 0578H 2.0 16.0 15 45 -32 +13 +15 1400
160 T4 20 0579H 8.0 32.0 17 27 -50 +25 +25 1900
160 T4 10 0580H 8.0 32.0 17 27 -50 +25 +25 1900
60 VDC AT +85 °C; 40 VDC AT +125 °C
4.0 T1 20 0581H 1.0 2.0 2.8 550 -16 +5 +6 525
4.0 T1 10 0582H 1.0 2.0 2.8 550 -16 +5 +6 525
4.0 T1 5 0583H 1.0 2.0 2.8 550 -16 +5 +6 525
8.2 T1 20 0584H 1.0 2.0 4 275 -24 +8 +9 625
8.2 T1 10 0585H 1.0 2.0 4 275 -24 +8 +9 625
8.2 T1 5 0586H 1.0 2.0 4 275 -24 +8 +9 625
20 T2 20 0587H 1.0 5.0 7 105 -16 +10.5 +12 930
20 T2 10 0588H 1.0 5.0 7 105 -16 +10.5 +12 930
20 T2 5 0589H 1.0 5.0 7 105 -16 +10.5 +12 930
39 T2 20 0590H 1.0 9.0 10 90 -28 +10.5 +12 1110
STANDARD RATINGS: DSCC 06013
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06013 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 6Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
60 VDC AT +85 °C; 40 VDC AT +125 °C
39 T2 10 0591H 1.0 9.0 10 90 -28 +10.5 +12 1110
39 T2 5 0592H 1.0 9.0 10 90 -28 +10.5 +12 1110
50 T3 20 0593H 2.0 12.0 10 50 -16 +10.5 +12 1330
50 T3 10 0594H 2.0 12.0 10 50 -16 +10.5 +12 1330
50 T3 5 0595H 2.0 12.0 10 50 -16 +10.5 +12 1330
68 T3 20 0596H 2.0 16.0 13 50 -32 +10.5 +12 1365
68 T3 10 0597H 2.0 16.0 13 50 -32 +10.5 +12 1365
68 T3 5 0598H 2.0 16.0 13 50 -32 +10.5 +12 1365
140 T4 20 0599H 8.0 32.0 16 28 -40 +20 +20 1850
140 T4 10 0600H 8.0 32.0 16 28 -40 +20 +20 1850
75 VDC AT +85 °C; 50 VDC AT +125 °C
3.5 T1 20 0601H 1.0 2.0 2.5 650 -16 +5 +6 525
3.5 T1 10 0602H 1.0 2.0 2.5 650 -16 +5 +6 525
3.5 T1 5 0603H 1.0 2.0 2.5 650 -16 +5 +6 525
6.8 T1 20 0604H 1.0 2.0 3.5 300 -20 +8 +9 610
6.8 T1 10 0605H 1.0 2.0 3.5 300 -20 +8 +9 610
6.8 T1 5 0606H 1.0 2.0 3.5 300 -20 +8 +9 610
15 T2 20 0607H 1.0 5.0 6 150 -16 +8 +9 890
15 T2 10 0608H 1.0 5.0 6 150 -16 +8 +9 890
15 T2 5 0609H 1.0 5.0 6 150 -16 +8 +9 890
33 T2 20 0610H 1.0 10.0 10 90 -24 +10.5 +15 1000
33 T2 10 0611H 1.0 10.0 10 90 -24 +10.5 +15 1000
33 T2 5 0612H 1.0 10.0 10 90 -24 +10.5 +15 1000
40 T3 20 0613H 2.0 12.0 9 60 -16 +10.5 +12 1250
40 T3 10 0614H 2.0 12.0 9 60 -16 +10.5 +12 1250
40 T3 5 0615H 2.0 12.0 9 60 -16 +10.5 +12 1250
56 T3 20 0616H 2.0 17.0 11 60 -28 +10.5 +15 1335
56 T3 10 0617H 2.0 17.0 11 60 -28 +10.5 +15 1335
56 T3 5 0618H 2.0 17.0 11 60 -28 +10.5 +15 1335
110 T4 20 0619H 9.0 36.0 12 29 -35 +20 +20 1850
110 T4 10 0620H 9.0 36.0 12 29 -35 +20 +20 1850
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.5 T1 20 0621H 1.0 2.0 2 950 -16 +7 +8 505
2.5 T1 10 0622H 1.0 2.0 2 950 -16 +7 +8 505
2.5 T1 5 0623H 1.0 2.0 2 950 -16 +7 +8 505
4.7 T1 20 0624H 1.0 2.0 3 500 -16 +7 +8 565
4.7 T1 10 0625H 1.0 2.0 3 500 -16 +7 +8 565
4.7 T1 5 0626H 1.0 2.0 3 500 -16 +7 +8 565
11 T2 20 0627H 1.0 4.0 5 200 -16 +8 +8 835
11 T2 10 0628H 1.0 4.0 5 200 -16 +8 +8 835
11 T2 5 0629H 1.0 4.0 5 200 -16 +8 +8 835
22 T2 20 0630H 1.0 9.0 7.5 100 -16 +8 +8 965
22 T2 10 0631H 1.0 9.0 7.5 100 -16 +8 +8 965
22 T2 5 0632H 1.0 9.0 7.5 100 -16 +8 +8 965
30 T3 20 0633H 2.0 12.0 7 80 -16 +8 +8 1240
30 T3 10 0634H 2.0 12.0 7 80 -16 +8 +8 1240
30 T3 5 0635H 2.0 12.0 7 80 -16 +8 +8 1240
43 T3 20 0636H 2.0 17.0 8.5 70 -20 +8 +8 1335
43 T3 10 0637H 2.0 17.0 8.5 70 -20 +8 +8 1335
43 T3 5 0638H 2.0 17.0 8.5 70 -20 +8 +8 1335
86 T4 20 0639H 9.0 36.0 10 30 -25 +15 +15 1800
86 T4 10 0640H 9.0 36.0 10 30 -25 +15 +15 1800
STANDARD RATINGS: DSCC 06013
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06013 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 7Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
125 VDC AT +85 °C; 85 VDC AT +125 °C
1.7 T1 20 0641H 1.0 2.0 2 1250 -16 +7 +8 415
1.7 T1 10 0642H 1.0 2.0 2 1250 -16 +7 +8 415
1.7 T1 5 0643H 1.0 2.0 2 1250 -16 +7 +8 415
3.6 T1 20 0644H 1.0 2.0 2.7 600 -16 +7 +8 520
3.6 T1 10 0645H 1.0 2.0 2.7 600 -16 +7 +8 520
3.6 T1 5 0646H 1.0 2.0 2.7 600 -16 +7 +8 520
9.0 T2 20 0647H 1.0 5.0 5 240 -16 +7 +8 755
9.0 T2 10 0648H 1.0 5.0 5 240 -16 +7 +8 755
9.0 T2 5 0649H 1.0 5.0 5 240 -16 +7 +8 755
14 T2 20 0650H 1.0 7.0 6 167 -16 +7 +8 860
14 T2 10 0651H 1.0 7.0 6 167 -16 +7 +8 860
14 T2 5 0652H 1.0 7.0 6 167 -16 +7 +8 860
18 T3 20 0653H 2.0 9.0 5 129 -16 +7 +8 1130
18 T3 10 0654H 2.0 9.0 5 129 -16 +7 +8 1130
18 T3 5 0655H 2.0 9.0 5 129 -16 +7 +8 1130
25 T3 20 0656H 2.0 13.0 6 93 -16 +7 +8 1200
25 T3 10 0657H 2.0 13.0 6 93 -16 +7 +8 1200
25 T3 5 0658H 2.0 13.0 6 93 -16 +7 +8 1200
56 T4 20 0659H 10.0 40.0 6.5 32 -25 +15 +15 1800
56 T4 10 0660H 10.0 40.0 6.5 32 -25 +15 +15 1800
STANDARD RATINGS: DSCC 06014
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06014 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
6 VDC AT +85 °C; 4 VDC AT +125 °C
220 T1 20 0177H 2.0 9.0 50 36 -64 +13 +16 1000
220 T1 10 0178H 2.0 9.0 50 36 -64 +13 +16 1000
820 T2 20 0179H 3.0 14.0 155 18 -88 +16 +20 1500
820 T2 10 0180H 3.0 14.0 155 18 -88 +16 +20 1500
1500 T3 20 0181H 5.0 20.0 172 18 -90 +20 +25 1900
1500 T3 10 0182H 5.0 20.0 172 18 -90 +20 +25 1900
2200 T4 20 0183H 6.0 24.0 170 13 -90 +25 +30 2300
2200 T4 10 0184H 6.0 24.0 170 13 -90 +25 +30 2300
8 VDC AT +85 °C; 5 VDC AT +125 °C
180 T1 20 0185H 2.0 9.0 41 45 -60 +13 +16 1000
180 T1 10 0186H 2.0 9.0 41 45 -60 +13 +16 1000
680 T2 20 0187H 3.0 14.0 130 22 -83 +16 +20 1500
680 T2 10 0188H 3.0 14.0 130 22 -83 +16 +20 1500
1500 T3 20 0189H 5.0 20.0 170 18 -90 +20 +25 1900
1500 T3 10 0190H 5.0 20.0 170 18 -90 +20 +25 1900
1800 T4 20 0191H 7.0 25.0 138 14 -90 +25 +30 2300
1800 T4 10 0192H 7.0 25.0 138 14 -90 +25 +30 2300
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
STANDARD RATINGS: DSCC 06013
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06013 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 8Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT +85 °C; 7 VDC AT +125 °C
150 T1 20 0193H 2.0 9.0 34 54 -55 +13 +16 900
150 T1 10 0194H 2.0 9.0 34 54 -55 +13 +16 900
560 T2 20 0195H 3.0 16.0 106 27 -77 +16 +20 1450
560 T2 10 0196H 3.0 16.0 106 27 -77 +16 +20 1450
1200 T3 20 0197H 5.0 20.0 137 18 -88 +20 +25 1850
1200 T3 10 0198H 5.0 20.0 137 18 -88 +20 +25 1850
1500 T4 20 0199H 7.0 25.0 114 15 -88 +25 +30 2300
1500 T4 10 0200H 7.0 25.0 114 15 -88 +25 +30 2300
15 VDC AT +85 °C; 10 VDC AT +125 °C
100 T1 20 0201H 2.0 9.0 30 72 -44 +13 +16 900
100 T1 10 0202H 2.0 9.0 30 72 -44 +13 +16 900
390 T2 20 0203H 3.0 16.0 74 31 -66 +16 +20 1450
390 T2 10 0204H 3.0 16.0 74 31 -66 +16 +20 1450
820 T3 20 0205H 6.0 24.0 111 22 -77 +20 +25 1800
820 T3 10 0206H 6.0 24.0 111 22 -77 +20 +25 180 0
1000 T4 20 0207H 8.0 32.0 92 17 -77 +25 +30 2300
1000 T4 10 0208H 8.0 32.0 92 17 -77 +25 +30 2300
25 VDC AT +85 °C; 15 VDC AT +125 °C
68 T1 20 0209H 2.0 9.0 22 90 -40 +12 +15 850
68 T1 10 0210H 2.0 9.0 22 90 -40 +12 +15 850
270 T2 20 0211H 3.0 16.0 55 33 -62 +13 +16 1400
270 T2 10 0212H 3.0 16.0 55 33 -62 +13 +16 1400
560 T3 20 0213H 7.0 28.0 76 24 -72 +20 +25 1750
560 T3 10 0214H 7.0 28.0 76 24 -72 +20 +25 1750
680 T4 20 0215H 8.0 32.0 63 19 -72 +25 +30 2100
680 T4 10 0216H 8.0 32.0 63 19 -72 +25 +30 2100
30 VDC AT +85 °C; 20 VDC AT +125 °C
56 T1 20 0217H 2.0 9.0 22 100 -38 +12 +15 800
56 T1 10 0218H 2.0 9.0 22 100 -38 +12 +15 800
220 T2 20 0219H 3.0 16.0 42 36 -60 +13 +16 1200
220 T2 10 0220H 3.0 16.0 42 36 -60 +13 +16 1200
470 T3 20 0221H 8.0 32.0 64 25 -65 +20 +25 1500
470 T3 10 0222H 8.0 32.0 64 25 -65 +20 +25 1500
560 T4 20 0223H 9.0 36.0 55 20 -65 +25 +30 2000
560 T4 10 0224H 9.0 36.0 55 20 -65 +25 +30 2000
50 VDC AT +85 °C; 30 VDC AT +125 °C
33 T1 20 0225H 2.0 9.0 12.3 135 -29 +10 +12 700
33 T1 10 0226H 2.0 9.0 12.3 135 -29 +10 +12 700
120 T2 20 0227H 4.0 24.0 22.5 49 -42 +12 +15 1200
120 T2 10 0228H 4.0 24.0 22.5 49 -42 +12 +15 1200
270 T3 20 0229H 8.0 32.0 37 29 -46 +20 +25 1450
270 T3 10 0230H 8.0 32.0 37 29 -46 +20 +25 1450
330 T4 20 0231H 9.0 36.0 38 22 -46 +25 +30 1900
330 T4 10 0232H 9.0 36.0 38 22 -46 +25 +30 1900
60 VDC AT +85 °C; 40 VDC AT +125 °C
27 T1 20 0233H 3.0 12.0 10.2 144 -24 +10 +12 700
27 T1 10 0234H 3.0 12.0 10.2 144 -24 +10 +12 700
100 T2 20 0235H 4.0 20.0 19 54 -36 +12 +15 1100
100 T2 10 0236H 4.0 20.0 19 54 -36 +12 +15 1100
220 T3 20 0237H 8.0 32.0 30 29 -40 +16 +20 1400
220 T3 10 0238H 8.0 32.0 30 29 -40 +16 +20 1400
270 T4 20 0239H 9.0 36.0 27 23 -45 +20 +25 1850
270 T4 10 0240H 9.0 36.0 27 23 -45 +20 +25 1850
STANDARD RATINGS: DSCC 06014
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06014 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 9Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
75 VDC AT +85 °C; 50 VDC AT +125 °C
22 T1 20 0241H 3.0 12.0 8.5 157 -19 +10 +12 600
22 T1 10 0242H 3.0 12.0 8.5 157 -19 +10 +12 600
82 T2 20 0243H 4.0 24.0 15.2 63 -30 +12 +15 1000
82 T2 10 0244H 4.0 24.0 15.2 63 -30 +12 +15 1000
180 T3 20 0245H 9.0 36.0 24.4 30 -35 +16 +20 1300
180 T3 10 0246H 9.0 36.0 24.4 30 -35 +16 +20 1300
220 T4 20 0247H 10.0 40.0 37.0 24 -40 +20 +25 1800
220 T4 10 0248H 10.0 40.0 37.0 24 -40 +20 +25 1800
100 VDC AT +85 °C; 65 VDC AT +125 °C
10 T1 20 0249H 3.0 12.0 4.5 200 -17 +10 +12 800
10 T1 10 0250H 3.0 12.0 4.5 200 -17 +10 +12 800
39 T2 20 0251H 5.0 24.0 10.4 80 -20 +12 +15 1300
39 T2 10 0252H 5.0 24.0 10.4 80 -20 +12 +15 1300
68 T3 20 0253H 10.0 40.0 11.3 40 -30 +14 +16 1600
68 T3 10 0254H 10.0 40.0 11.3 40 -30 +14 +16 1600
120 T4 20 0255H 12.0 48.0 25 30 -35 +15 +17 2000
120 T4 10 0256H 12.0 48.0 25 30 -35 +15 +17 2000
125 VDC AT +85 °C; 85 VDC AT +125 °C
6.8 T1 20 0257H 3.0 12.0 6.0 300 -14 +10 +12 700
6.8 T1 10 0258H 3.0 12.0 6.0 300 -14 +10 +12 700
27 T2 20 0259H 5.0 24.0 7.2 90 -18 +12 +15 1200
27 T2 10 0260H 5.0 24.0 7.2 90 -18 +12 +15 1200
47 T3 20 0261H 10.0 40.0 7.9 50 -26 +14 +16 1500
47 T3 10 0262H 10.0 40.0 7.9 50 -26 +14 +16 1500
82 T4 20 0263H 12.0 48.0 17.4 32 -30 +15 +17 1900
82 T4 10 0264H 12.0 48.0 17.4 32 -30 +15 +17 1900
STANDARD RATINGS: DSCC 06014
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06014 (1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 10 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS: DSCC 06015
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06015
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA
RMS
(3)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
6 VDC AT +85 °C; 4 VDC AT +125 °C
30 T1 20 0441H 1.0 2.0 4.5 100 -40 +10.5 +12 1.99 820
30 T1 10 0442H 1.0 2.0 4.5 100 -40 +10.5 +12 1.99 820
30 T1 5 0443H 1.0 2.0 4.5 100 -40 +10.5 +12 1.99 820
68 T1 20 0444H 1.0 2.0 7.5 60 -40 +14 +16 1.58 960
68 T1 10 0445H 1.0 2.0 7.5 60 -40 +14 +16 1.58 960
68 T1 5 0446H 1.0 2.0 7.5 60 -40 +14 +16 1.58 960
140 T2 20 0447H 1.0 3.0 10.5 40 -40 +14 +16 0.99 1200
140 T2 10 0448H 1.0 3.0 10.5 40 -40 +14 +16 0.99 1200
140 T2 5 0449H 1.0 3.0 10.5 40 -40 +14 +16 0.99 1200
270 T2 20 0450H 1.0 6.5 22.5 25 -44 +17.5 +20 1.11 1375
270 T2 10 0451H 1.0 6.5 22.5 25 -44 +17.5 +20 1.11 1375
270 T2 5 0452H 1.0 6.5 22.5 25 -44 +17.5 +20 1.11 1375
330 T3 20 0453H 2.0 7.9 18.0 20 -44 +14 +16 0.73 1800
330 T3 10 0454H 2.0 7.9 18.0 20 -44 +14 +16 0.73 1800
330 T3 5 0455H 2.0 7.9 18.0 20 -44 +14 +16 0.73 1800
560 T3 20 0456H 2.0 13.0 27.5 25 -64 +17.5 +20 0.65 1900
560 T3 10 0457H 2.0 13.0 27.5 25 -64 +17.5 +20 0.65 1900
560 T3 5 0458H 2.0 13.0 27.5 25 -64 +17.5 +20 0.65 1900
1200 T4 20 0459H 3.0 14.0 45.0 20 -80 +25 +25 0.50 2265
1200 T4 10 0460H 3.0 14.0 45.0 20 -80 +25 +25 0.50 2265
8 VDC AT +85 °C; 5 VDC AT +125 °C
25 T1 20 0461H 1.0 2.0 3.75 100 -40 +10.5 +12 1.99 820
25 T1 10 0462H 1.0 2.0 3.75 100 -40 +10.5 +12 1.99 820
25 T1 5 0463H 1.0 2.0 3.75 100 -40 +10.5 +12 1.99 820
56 T1 20 0464H 1.0 2.0 7.0 59 -40 +14 +16 1.66 900
56 T1 10 0465H 1.0 2.0 7.0 59 -40 +14 +16 1.66 900
56 T1 5 0466H 1.0 2.0 7.0 59 -40 +14 +16 1.66 900
120 T2 20 0467H 1.0 2.0 10.0 50 -44 +17.5 +20 1.11 1220
120 T2 10 0468H 1.0 2.0 10.0 50 -44 +17.5 +20 1.11 1220
120 T2 5 0469H 1.0 2.0 10.0 50 -44 +17.5 +20 1.11 1220
220 T2 20 0470H 1.0 7.0 18.5 30 -44 +17.5 +20 1.12 1370
220 T2 10 0471H 1.0 7.0 18.5 30 -44 +17.5 +20 1.12 1370
220 T2 5 0472H 1.0 7.0 18.5 30 -44 +17.5 +20 1.12 1370
290 T3 20 0473H 2.0 6.0 17.0 25 -64 +17.5 +20 0.78 1770
290 T3 10 0474H 2.0 6.0 17.0 25 -64 +17.5 +20 0.78 1770
290 T3 5 0475H 2.0 6.0 17.0 25 -64 +17.5 +20 0.78 1770
430 T3 20 0476H 2.0 14.0 23.0 25 -64 +17.5 +20 0.71 1825
430 T3 10 0477H 2.0 14.0 23.0 25 -64 +17.5 +20 0.71 1825
430 T3 5 0478H 2.0 14.0 23.0 25 -64 +17.5 +20 0.71 1825
850 T4 20 0479H 4.0 16.0 30.0 22 -80 +25 +25 0.47 2330
850 T4 10 0480H 4.0 16.0 30.0 22 -80 +25 +25 0.47 2330
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 11 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT +85 °C; 7 VDC AT +125 °C
20 T1 20 0481H 1.0 2.0 3.0 175 -32 +10.5 +12 1.99 820
20 T1 10 0482H 1.0 2.0 3.0 175 -32 +10.5 +12 1.99 820
20 T1 5 0483H 1.0 2.0 3.0 175 -32 +10.5 +12 1.99 820
47 T1 20 0484H 1.0 2.0 6.5 100 -36 +14 +16 1.84 855
47 T1 10 0485H 1.0 2.0 6.5 100 -36 +14 +16 1.84 855
47 T1 5 0486H 1.0 2.0 6.5 100 -36 +14 +16 1.84 855
100 T2 20 0487H 1.0 4.0 7.5 60 -36 +14 +16 0.99 1200
100 T2 10 0488H 1.0 4.0 7.5 60 -36 +14 +16 0.99 1200
100 T2 5 0489H 1.0 4.0 7.5 60 -36 +14 +16 0.99 1200
180 T2 20 0490H 1.0 7.0 15.0 40 -36 +14 +16 1.11 1365
180 T2 10 0491H 1.0 7.0 15.0 40 -36 +14 +16 1.11 1365
180 T2 5 0492H 1.0 7.0 15.0 40 -36 +14 +16 1.11 1365
250 T3 20 0493H 2.0 10.0 15.0 30 -40 +14 +16 0.80 1720
250 T3 10 0494H 2.0 10.0 15.0 30 -40 +14 +16 0.80 1720
250 T3 5 0495H 2.0 10.0 15.0 30 -40 +14 +16 0.80 1720
390 T3 20 0496H 2.0 16.0 22.0 25 -64 +17.5 +20 0.75 1800
390 T3 10 0497H 2.0 16.0 22.0 25 -64 +17.5 +20 0.75 1800
390 T3 5 0498H 2.0 16.0 22.0 25 -64 +17.5 +20 0.75 1800
750 T4 20 0499H 4.0 16.0 25.0 23 -80 +25 +25 0.44 2360
750 T4 10 0500H 4.0 16.0 25.0 23 -80 +25 +25 0.44 2360
15 VDC AT +85 °C; 10 VDC AT +125 °C
15 T1 20 0501H 1.0 2.0 2.5 155 -24 +10.5 +12 1.99 780
15 T1 10 0502H 1.0 2.0 2.5 155 -24 +10.5 +12 1.99 780
15 T1 5 0503H 1.0 2.0 2.5 155 -24 +10.5 +12 1.99 780
33 T1 20 0504H 1.0 2.0 5.0 90 -28 +14 +16 1.66 820
33 T1 10 0505H 1.0 2.0 5.0 90 -28 +14 +16 1.66 820
33 T1 5 0506H 1.0 2.0 5.0 90 -28 +14 +16 1.66 820
70 T2 20 0507H 1.0 4.0 6.5 75 -28 +14 +16 1.11 1150
70 T2 10 0508H 1.0 4.0 6.5 75 -28 +14 +16 1.11 1150
70 T2 5 0509H 1.0 4.0 6.5 75 -28 +14 +16 1.11 1150
120 T2 20 0510H 1.0 7.0 9.0 50 -28 +17.5 +20 1.12 1450
120 T2 10 0511H 1.0 7.0 9.0 50 -28 +17.5 +20 1.12 1450
120 T2 5 0512H 1.0 7.0 9.0 50 -28 +17.5 +20 1.12 1450
170 T3 20 0513H 2.0 10.0 12.5 35 -32 +14 +16 0.78 1480
170 T3 10 0514H 2.0 10.0 12.5 35 -32 +14 +16 0.78 1480
170 T3 5 0515H 2.0 10.0 12.5 35 -32 +14 +16 0.78 1480
270 T3 20 0516H 2.0 16.0 16.0 30 -56 +17.5 +20 0.71 1740
270 T3 10 0517H 2.0 16.0 16.0 30 -56 +17.5 +20 0.71 1740
270 T3 5 0518H 2.0 16.0 16.0 30 -56 +17.5 +20 0.71 1740
540 T4 20 0519 H 6.0 24.0 20.0 23 -80 +25 +25 0.47 2330
540 T4 10 0520H 6.0 24.0 20.0 23 -80 +25 +25 0.47 2330
STANDARD RATINGS: DSCC 06015
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06015
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA
RMS
(3)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 12 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 VDC AT +85 °C; 15 VDC AT +125 °C
10 T1 20 0521H 1.0 2.0 2.0 220 -16 +8 +9 2.66 715
10 T1 10 0522H 1.0 2.0 2.0 220 -16 +8 +9 2.66 715
10 T1 5 0523H 1.0 2.0 2.0 220 -16 +8 +9 2.66 715
22 T1 20 0524H 1.0 2.0 3.3 140 -20 +10.5 +12 1.99 825
22 T1 10 0525H 1.0 2.0 3.3 140 -20 +10.5 +12 1.99 825
22 T1 5 0526H 1.0 2.0 3.3 140 -20 +10.5 +12 1.99 825
50 T2 20 0527H 1.0 2.0 5.5 70 -28 +13 +15 1.46 1130
50 T2 10 0528H 1.0 2.0 5.5 70 -28 +13 +15 1.46 1130
50 T2 5 0529H 1.0 2.0 5.5 70 -28 +13 +15 1.46 1130
100 T2 20 0530H 1.0 10.0 7.5 50 -28 +13 +15 0.99 1435
100 T2 10 0531H 1.0 10.0 7.5 50 -28 +13 +15 0.99 1435
100 T2 5 0532H 1.0 10.0 7.5 50 -28 +13 +15 0.99 1435
120 T3 20 0533H 2.0 6.0 10.5 38 -32 +13 +15 1.16 1450
120 T3 10 0534H 2.0 6.0 10.5 38 -32 +13 +15 1.16 1450
120 T3 5 0535H 2.0 6.0 10.5 38 -32 +13 +15 1.16 1450
180 T3 20 0536H 2.0 18.0 13.0 32 -48 +13 +15 0.96 1525
180 T3 10 0537H 2.0 18.0 13.0 32 -48 +13 +15 0.96 1525
180 T3 5 0538H 2.0 18.0 13.0 32 -48 +13 +15 0.96 1525
350 T4 20 0539H 7.0 28.0 17.5 24 -70 +25 +25 0.67 1970
350 T4 10 0540H 7.0 28.0 17.5 24 -70 +25 +25 0.67 1970
30 VDC AT +85 °C; 20 VDC AT +125 °C
8 T1 20 0541H 1.0 2.0 2.0 275 -16 +8 +12 3.32 640
8 T1 10 0542H 1.0 2.0 2.0 275 -16 +8 +12 3.32 640
8 T1 5 0543H 1.0 2.0 2.0 275 -16 +8 +12 3.32 640
15 T1 20 0544H 1.0 2.0 2.5 175 -20 +10.5 +12 2.21 780
15 T1 10 0545H 1.0 2.0 2.5 175 -20 +10.5 +12 2.21 780
15 T1 5 0546H 1.0 2.0 2.5 175 -20 +10.5 +12 2.21 780
40 T2 20 0547H 1.0 5.0 5.0 65 -24 +10.5 +12 1.66 1120
40 T2 10 0548H 1.0 5.0 5.0 65 -24 +10.5 +12 0.66 1120
40 T2 5 0549H 1.0 5.0 5.0 65 -24 +10.5 +12 0.66 1120
68 T2 20 0550H 1.0 8.0 6.5 60 -24 +13 +15 1.27 1285
68 T2 10 0551H 1.0 8.0 6.5 60 -24 +13 +15 1.27 1285
68 T2 5 0552H 1.0 8.0 6.5 60 -24 +13 +15 1.27 1285
100 T3 20 0553H 2.0 12.0 8.5 40 -28 +10.5 +12 1.13 1450
100 T3 10 0554H 2.0 12.0 8.5 40 -28 +10.5 +12 1.13 1450
100 T3 5 0555H 2.0 12.0 8.5 40 -28 +10.5 +12 1.13 1450
150 T3 20 0556H 2.0 18.0 11.5 35 -48 +13 +15 1.02 1525
150 T3 10 0557H 2.0 18.0 11.5 35 -48 +13 +15 1.02 1525
150 T3 5 0558H 2.0 18.0 11.5 35 -48 +13 +15 1.02 1525
300 T4 20 0559H 8.0 32.0 15.5 25 -60 +25 +25 0.69 1950
300 T4 10 0560H 8.0 32.0 15.5 25 -60 +25 +25 0.69 1950
STANDARD RATINGS: DSCC 06015
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06015
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA
RMS
(3)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 13 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
50 VDC AT +85 °C; 30 VDC AT +125 °C
5 T1 20 0561H 1.0 2.0 1.5 400 -16 +5 +6 3.98 580
5 T1 10 0562H 1.0 2.0 1.5 400 -16 +5 +6 3.98 580
5 T1 5 0563H 1.0 2.0 1.5 400 -16 +5 +6 3.98 580
10 T1 20 0564H 1.0 2.0 2.0 250 -24 +8 +9 2.66 715
10 T1 10 0565H 1.0 2.0 2.0 250 -24 +8 +9 2.66 715
10 T1 5 0566H 1.0 2.0 2.0 250 -24 +8 +9 2.66 715
25 T2 20 0567H 1.0 5.0 4.0 95 -20 +10.5 +12 2.13 1005
25 T2 10 0568H 1.0 5.0 4.0 95 -20 +10.5 +12 2.13 1005
25 T2 5 0569H 1.0 5.0 4.0 95 -20 +10.5 +12 2.13 1005
47 T2 20 0570H 1.0 9.0 5.0 70 -28 +13 +15 1.56 1155
47 T2 10 0571H 1.0 9.0 5.0 70 -28 +13 +15 1.56 1155
47 T2 5 0572H 1.0 9.0 5.0 70 -28 +13 +15 1.56 1155
60 T3 20 0573H 2.0 12.0 6.0 45 -16 +10.5 +12 1.33 1335
60 T3 10 0574H 2.0 12.0 6.0 45 -16 +10.5 +12 1.33 1335
60 T3 5 0575H 2.0 12.0 6.0 45 -16 +10.5 +12 1.33 1335
82 T3 20 0576H 2.0 16.0 7.5 45 -32 +13 +15 1.22 1400
82 T3 10 0577H 2.0 16.0 7.5 45 -32 +13 +15 1.22 1400
82 T3 5 0578H 2.0 16.0 7.5 45 -32 +13 +15 1.22 1400
160 T4 20 0579H 6.0 32.0 8.5 27 -50 +25 +25 0.71 1900
160 T4 10 0580H 6.0 32.0 8.5 27 -50 +25 +25 0.71 1900
60 VDC AT +85 °C; 40 VDC AT +125 °C
4 T1 20 0581H 1.0 2.0 1.4 550 -16 +5 +6 4.65 525
4 T1 10 0582H 1.0 2.0 1.4 550 -16 +5 +6 4.65 525
4 T1 5 0583H 1.0 2.0 1.4 550 -16 +5 +6 4.65 525
8.2 T1 20 0584H 1.0 2.0 2.0 275 -24 +8 +9 3.24 625
8.2 T1 10 0585H 1.0 2.0 2.0 275 -24 +8 +9 3.24 625
8.2 T1 5 0586H 1.0 2.0 2.0 275 -24 +8 +9 3.24 625
20 T2 20 0587H 1.0 5.0 3.5 105 -16 +10.5 +12 2.32 930
20 T2 10 0588H 1.0 5.0 3.5 105 -16 +10.5 +12 2.32 930
20 T2 5 0589H 1.0 5.0 3.5 105 -16 +10.5 +12 2.32 930
39 T2 20 0590H 1.0 9.0 5.0 90 -28 +10.5 +12 1.70 1110
39 T2 10 0591H 1.0 9.0 5.0 90 -28 +10.5 +12 1.70 1110
39 T2 5 0592H 1.0 9.0 5.0 90 -28 +10.5 +12 1.70 1110
50 T3 20 0593H 2.0 12.0 5.0 50 -16 +10.5 +12 1.33 1330
50 T3 10 0594H 2.0 12.0 5.0 50 -16 +10.5 +12 1.33 1330
50 T3 5 0595H 2.0 12.0 5.0 50 -16 +10.5 +12 1.33 1330
68 T3 20 0596H 2.0 16.0 6.5 50 -32 +10.5 +12 1.27 1365
68 T3 10 0597H 2.0 16.0 6.5 50 -32 +10.5 +12 1.27 1365
68 T3 5 0598H 2.0 16.0 6.5 50 -32 +10.5 +12 1.27 1365
140 T4 20 0599H 8.0 32.0 8.0 28 -40 +20 +20 0.76 1850
140 T4 10 0600H 8.0 32.0 8.0 28 -40 +20 +20 0.76 1850
STANDARD RATINGS: DSCC 06015
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06015
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA
RMS
(3)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 14 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
75 VDC AT +85 °C; 50 VDC AT +125 °C
3.5 T1 20 0601H 1.0 2.0 1.25 650 -16 +5 +6 4.74 525
3.5 T1 10 0602H 1.0 2.0 1.25 650 -16 +5 +6 4.74 525
3.5 T1 5 0603H 1.0 2.0 1.25 650 -16 +5 +6 4.74 525
6.8 T1 20 0604H 1.0 2.0 1.75 300 -20 +8 +9 3.42 610
6.8 T1 10 0605H 1.0 2.0 1.75 300 -20 +8 +9 3.42 610
6.8 T1 5 0606H 1.0 2.0 1.75 300 -20 +8 +9 3.42 610
15 T2 20 0607H 1.0 5.0 3.0 150 -16 +8 +9 2.66 890
15 T2 10 0608H 1.0 5.0 3.0 150 -16 +8 +9 2.66 890
15 T2 5 0609H 1.0 5.0 3.0 150 -16 +8 +9 2.66 890
33 T2 20 0610H 1.0 10.0 5.0 90 -24 +10.5 +15 2.01 1000
33 T2 10 0611H 1.0 10.0 5.0 90 -24 +10.5 +15 2.01 1000
33 T2 5 0612H 1.0 10.0 5.0 90 -24 +10.5 +15 2.01 1000
40 T3 20 0613H 2.0 12.0 4.5 60 -16 +10.5 +12 1.50 1250
40 T3 10 0614H 2.0 12.0 4.5 60 -16 +10.5 +12 1.50 1250
40 T3 5 0615H 2.0 12.0 4.5 60 -16 +10.5 +12 1.50 1250
56 T3 20 0616H 2.0 17.0 5.5 60 -28 +10.5 +15 1.31 1335
56 T3 10 0617H 2.0 17.0 5.5 60 -28 +10.5 +15 1.31 1335
56 T3 5 0618H 2.0 17.0 5.5 60 -28 +10.5 +15 1.31 1335
110 T4 20 0619H 9.0 36.0 6.0 29 -35 +20 +20 0.73 1850
110 T4 10 0620H 9.0 36.0 6.0 29 -35 +20 +20 0.73 1850
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.5 T1 20 0621H 1.0 2.0 1.0 950 -16 +7 +8 5.31 505
2.5 T1 10 0622H 1.0 2.0 1.0 950 -16 +7 +8 5.31 505
2.5 T1 5 0623H 1.0 2.0 1.0 950 -16 +7 +8 5.31 505
4.7 T1 20 0624H 1.0 2.0 1.5 500 -16 +7 +8 4.24 565
4.7 T1 10 0625H 1.0 2.0 1.5 500 -16 +7 +8 4.24 565
4.7 T1 5 0626H 1.0 2.0 1.5 500 -16 +7 +8 4.24 565
11 T2 20 0627H 1.0 4.0 2.5 200 -16 +8 +8 3.02 835
11 T2 10 0628H 1.0 4.0 2.5 200 -16 +8 +8 3.02 835
11 T2 5 0629H 1.0 4.0 2.5 200 -16 +8 +8 3.02 835
22 T2 20 0630H 1.0 9.0 3.75 100 -16 +8 +8 2.26 965
22 T2 10 0631H 1.0 9.0 3.75 100 -16 +8 +8 2.26 965
22 T2 5 0632H 1.0 9.0 3.75 100 -16 +8 +8 2.26 965
30 T3 20 0633H 2.0 12.0 3.5 80 -16 +8 +8 1.55 1240
30 T3 10 0634H 2.0 12.0 3.5 80 -16 +8 +8 1.55 1240
30 T3 5 0635H 2.0 12.0 3.5 80 -16 +8 +8 1.55 1240
43 T3 20 0636H 2.0 17.0 4.25 70 -20 +8 +8 1.31 1335
43 T3 10 0637H 2.0 17.0 4.25 70 -20 +8 +8 1.31 1335
43 T3 5 0638H 2.0 17.0 4.25 70 -20 +8 +8 1.31 1335
86 T4 20 0639H 9.0 36.0 5.0 30 -25 +15 +15 0.77 1800
86 T4 10 0640H 9.0 36.0 5.0 30 -25 +15 +15 0.77 1800
STANDARD RATINGS: DSCC 06015
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06015
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA
RMS
(3)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 15 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
125 VDC AT +85 °C; 85 VDC AT +125 °C
1.7 T1 20 0641H 1.0 2.0 1.0 1250 -16 +7 +8 7.81 415
1.7 T1 10 0642H 1.0 2.0 1.0 1250 -16 +7 +8 7.81 415
1.7 T1 5 0643H 1.0 2.0 1.0 1250 -16 +7 +8 7.81 415
3.6 T1 20 0644H 1.0 2.0 1.35 600 -24 +7 +8 4.98 520
3.6 T1 10 0645H 1.0 2.0 1.35 600 -16 +7 +8 4.98 520
3.6 T1 5 0646H 1.0 2.0 1.35 600 -16 +7 +8 4.98 520
9.0 T2 20 0647H 1.0 5.0 2.5 240 -16 +7 +8 3.69 755
9.0 T2 10 0648H 1.0 5.0 2.5 240 -16 +7 +8 3.69 755
9.0 T2 5 0649H 1.0 5.0 2.5 240 -16 +7 +8 3.69 755
14 T2 20 0650H 1.0 7.0 3.0 167 -16 +7 +8 2.85 860
14 T2 10 0651H 1.0 7.0 3.0 167 -16 +7 +8 2.85 860
14 T2 5 0652H 1.0 7.0 3.0 167 -16 +7 +8 2.85 860
18 T3 20 0653H 2.0 9.0 2.5 129 -16 +7 +8 1.85 1130
18 T3 10 0654H 2.0 9.0 2.5 129 -16 +7 +8 1.85 1130
18 T3 5 0655H 2.0 9.0 2.5 129 -16 +7 +8 1.85 1130
25 T3 20 0656H 2.0 13.0 3.0 93 -16 +7 +8 1.59 1200
25 T3 10 0657H 2.0 13.0 3.0 93 -16 +7 +8 1.59 1200
25 T3 5 0658H 2.0 13.0 3.0 93 -16 +7 +8 1.59 1200
56 T4 20 0659 H 10.0 40.0 3.25 32 -25 +15 +15 0.77 1800
56 T4 10 0660H 10.0 40.0 3.25 32 -25 +15 +15 0.77 1800
STANDARD RATINGS: DSCC 06015
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06015
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA
RMS
(3)
+25 °C +85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 16 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS: DSCC 06016
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06016
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX.. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA RMS
(3)
+25 °C
+85 °C
+125 °C -55 °C +85 °C +125 °C
6 VDC AT +85 °C; 4 VDC AT +125 °C
220 T1 20 0177H 2 9 25 36 -64 13 16 1.51 1000
220 T1 10 0178H 2 9 25 36 -64 13 16 1.51 1000
820 T2 20 0179H 314 77.5 18 -88 16 20 1.26 1500
820 T2 10 0180H 314 77.5 18 -88 16 20 1.26 1500
1500 T3 20 0181H 520 86 18 -90 20 25 0.76 1900
1500 T3 10 0182H 520 86 18 -90 20 25 0.76 1900
2200 T4 20 0183H 624 85 13 -90 25 30 0.52 2300
2200 T4 10 0184H 624 85 13 -90 25 30 0.52 2300
8 VDC AT +85 °C; 5 VDC AT +125 °C
180 T1 20 0185H 2 9 20.5 45 -60 13 16 1.51 1000
180 T1 10 0186H 2 9 20.5 45 -60 13 16 1.51 1000
680 T2 20 0187H 314 65 22 -83 16 20 1.27 1500
680 T2 10 0188H 314 65 22 -83 16 20 1.27 1500
1500 T3 20 0189H 520 85 18 -90 20 25 0.75 1900
1500 T3 10 0190H 520 85 18 -90 20 25 0.75 1900
1800 T4 20 0191H 725 69 14 -90 25 30 0.51 2300
1800 T4 10 0192H 725 69 14 -90 25 30 0.51 2300
10 VDC AT +85 °C; 7 VDC AT +125 °C
150 T1 20 0193H 2 9 17 54 -55 13 16 1.51 900
150 T1 10 0194 2 9 17 54 -55 13 16 1.51 900
560 T2 20 0195H 316 53 27 -77 16 20 1.26 1450
560 T2 10 0196H 316 53 27 -77 16 20 1.26 1450
1200 T3 20 0197H 520 68.5 18 -88 20 25 0.76 1850
1200 T3 10 0198H 520 68.5 18 -88 20 25 0.76 1850
1500 T4 20 0199H 725 57 15 -88 25 30 0.51 2300
1500 T4 10 0200H 725 57 15 -88 25 30 0.51 2300
15 VDC AT +85 °C; 10 VDC AT +125 °C
100 T1 20 0201H 2 9 15 72 -44 13 16 1.99 900
100 T1 10 0202H 2 9 15 72 -44 13 16 1.99 900
390 T2 20 0203H 316 37 31 -66 16 20 1.26 1450
390 T2 10 0204H 316 37 31 -66 16 20 1.26 1450
820 T3 20 0205H 624 55.5 22 -77 20 25 0.9 1800
820 T3 10 0206H 624 55.5 22 -77 20 25 0.9 1800
1000 T4 20 0207H 832 46 17 -77 25 30 0.61 2300
1000 T4 10 0208H 832 46 17 -77 25 30 0.61 2300
25 VDC AT +85 °C; 15 VDC AT +125 °C
68 T1 20 0209H 2 9 11 90 -40 12 15 2.15 850
68 T1 10 0210H 2 9 11 90 -40 12 15 2.15 850
270 T2 20 0211H 316 27.5 33 -62 13 16 1.35 1400
270 T2 10 0212H 316 27.5 33 -62 13 16 1.35 1400
560 T3 20 0213H 728 38 24 -72 20 25 0.9 1750
560 T3 10 0214H 728 38 24 -72 20 25 0.9 1750
680 T4 20 0215H 832 31.5 19 -72 25 30 0.62 2100
680 T4 10 0216H 832 31.5 19 -72 25 30 0.62 2100
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 17 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
30 VDC AT +85 °C; 20 VDC AT +125 °C
56 T1 20 0217H 2 9 11 100 -38 12 15 2.61 800
56 T1 10 0218H 2 9 11 100 -38 12 15 2.61 800
220 T2 20 0219H 316 21 36 -60 13 16 1.27 1200
220 T2 10 0220H 316 21 36 -60 13 16 1.27 1200
470 T3 20 0221H 832 32 25 -65 20 25 0.91 1500
470 T3 10 0222H 832 32 25 -65 20 25 0.91 1500
560 T4 20 0223H 936 27.5 20 -65 25 30 0.65 2000
560 T4 10 0224H 936 27.5 20 -65 25 30 0.65 2000
50 VDC AT +85 °C; 30 VDC AT +125 °C
33 T1 20 0225H 2 9 6.15 135 -29 10 12 2.48 700
33 T1 10 0226H 2 9 6.15 135 -29 10 12 2.48 700
120 T2 20 0227H 424 11.3 49 -42 12 15 1.25 1200
120 T2 10 0228H 424 11.3 49 -42 12 15 1.25 1200
270 T3 20 0229H 832 18.5 29 -46 20 25 0.91 1450
270 T3 10 0230H 832 18.5 29 -46 20 25 0.91 1450
330 T4 20 0231H 936 19 22 -46 25 30 0.77 1900
330 T4 10 0232H 936 19 22 -46 25 30 0.77 1900
60 VDC AT +85 °C; 40 VDC AT +125 °C
27 T1 20 0233H 312 5.1 144 -24 10 12 2.51 700
27 T1 10 0234H 312 5.1 144 -24 10 12 2.51 700
100 T2 20 0235H 420 9.5 54 -36 12 15 1.26 1100
100 T2 10 0236H 420 9.5 54 -36 12 15 1.26 1100
220 T3 20 0237H 832 15 29 -40 16 20 0.91 1400
220 T3 10 0238H 832 15 29 -40 16 20 0.91 1400
270 T4 20 0239H 936 13.5 23 -45 20 25 0.67 1850
270 T4 10 0240H 936 13.5 23 -45 20 25 0.67 1850
75 VDC AT +85 °C; 50 VDC AT +125 °C
22 T1 20 0241H 312 4.25 157 -19 10 12 2.57 600
22 T1 10 0242H 312 4.25 157 -19 10 12 2.57 600
82 T2 20 0243H 424 7.6 63 -30 12 15 1.23 1000
82 T2 10 0244H 424 7.6 63 -30 12 15 1.23 1000
180 T3 20 0245H 936 12.2 30 -35 16 20 0.9 1300
180 T3 10 0246H 936 12.2 30 -35 16 20 0.9 1300
220 T4 20 0247H 10 40 18.5 24 -40 20 25 1.12 1800
220 T4 10 0248H 10 40 18.5 24 -40 20 25 1.12 1800
STANDARD RATINGS: DSCC 06016
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06016
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX.. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA RMS
(3)
+25 °C
+85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com Vishay
Revision: 20-Jul-15 18 Document Number: 40143
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
1. At +125 °C the rated voltage of the capacitors decreases to 66 2/3 % of the +85 °C rated voltage.
2. The peak of the applied AC ripple voltage plus the applied DC voltage must not exceed the DC voltage rating of the capacitor either forward
or reverse.
3. The ripple current listed represents a rating calculated using a maximum internal temperature rise (T) of +50 °C at 40 kHz at +85 °C
ambient with a maximum peak rated voltage of 66 2/3 % of the +85 °C peak voltage rating.
4. The maximum allowable internal temperature rise (T) decreases linearly to a calculated +10 °C rise at +125 °C ambient.
5. The internal temperature rise is directly proportional to the equivalent series resistance of the capacitor and equivalent series
resistance increases with decreasing frequency.
100 VDC AT +85 °C; 65 VDC AT +125 °C
10 T1 20 0249H 312 2.25 200 -17 10 12 2.99 800
10 T1 10 0250H 312 2.25 200 -17 10 12 2.99 800
39 T2 20 0251H 524 5.2 80 -20 12 15 1.77 1300
39 T2 10 0252H 524 5.2 80 -20 12 15 1.77 1300
68 T3 20 0253H 10 40 5.65 40 -30 14 16 1.11 1600
68 T3 10 0254H 10 40 5.65 40 -30 14 16 1.11 1600
120 T4 20 0255H 12 48 12.5 30 -35 15 17 1.38 2000
120 T4 10 0256H 12 48 12.5 30 -35 15 17 1.38 2000
125 VDC AT +85 °C; 85 VDC AT +125 °C
6.8 T1 20 0257H 312 3300 -14 10 12 5.86 700
6.8 T1 10 0258H 312 3300 -14 10 12 5.86 700
27 T2 20 0259H 524 3.6 90 -18 12 15 1.77 1200
27 T2 10 0260H 524 3.6 90 -18 12 15 1.77 1200
47 T3 20 0261H 10 40 3.95 50 -26 14 16 1.12 1500
47 T3 10 0262H 10 40 3.95 50 -26 14 16 1.12 1500
82 T4 20 0263H 12 48 8.7 32 -30 15 17 1.41 1900
82 T4 10 0264H 12 48 8.7 32 -30 15 17 1.41 1900
DSCC 06013, 06014, 06015, 06016 RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY,
TEMPERATURE AND APPLIED PEAK VOLTAGE
FREQUENCY OF
APPLIED RIPPLE
CURRENT
120 Hz 800 Hz 1 kHz 10 kHz 40 kHz 100 kHz
AMBIENT
STILL AIR
TEMP °C TEMP °C TEMP °C TEMP °C TEMP °C TEMP °C
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
% OF
APPLIED
VOLTAGE
100 % 0.60 0.39 - - 0.71 0.43 - - 0.72 0.46 - - 0.88 0.55 - - 1.0 0.63 - - 1.1 0.69 - -
90 % 0.60 0.46 - - 0.71 0.55 - - 0.72 0.55 - - 0.88 0.67 - - 1.0 0.77 - - 1.1 0.85 - -
80 % 0.60 0.52 0.35 - 0.71 0.62 0.42 - 0.72 0.62 0.42 - 0.88 0.76 0.52 - 1.0 0.87 0.59 - 1.1 0.96 0.65 -
70 % 0.60 0.58 0.44 - 0.71 0.69 0.52 - 0.72 0.70 0.52 - 0.88 0.85 0.64 - 1.0 0.97 0.73 - 1.1 1.07 0.80 -
66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
STANDARD RATINGS: DSCC 06016
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06016
(1)
MAX. DCL (μA) AT
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
(
)
MAX.. CAPACITANCE
CHANGE (%) AT MAX. ESR
AT +25 °C
120 Hz
(
)
(2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA RMS
(3)
+25 °C
+85 °C
+125 °C -55 °C +85 °C +125 °C
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF = maximum dissipation factor from Standard Ratings table
f = 120 Hz
C = nominal capacitance
(3) For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
ESR (max.) DF
2C
-------------- where,=
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
