IEC Pin and Sleeve 30A, 125V, 2 Pole, 3 Wire Watertight Plug Features * UL Type 4X, 12 and IP69k environmental ratings * One piece non-metallic housing provides impact and chemical resistance in an insulated body * Watertight neoprene gland seal to prevent water ingress from entering at cable entrance * Solid one-piece pins for reliable electrical contact * Sequential contact engagement to prevent a momentary over-voltage Ordering Information Description Watertight IEC Pin and Sleeve Mating Plug UPC Number 783585403557 Catalog Number HBL330P4W Listings UL Listed, File E146033 CSA Certified File LR280C UL Classified to IEC 60309-1 IEC 60309-2 Specifications Housing PBT Locking Ring PBT Sealing Gasket Solid Neoprene Contact Carrier High-Impact Thermoset Glands Santoprene Terminal Screws Stainless Steel Cord Clamps PBT Peformance Electrical Current Interrupting Dielectric Voltage Certified for current interrupting at full rated current Max. Working Voltage 600V AC RMS Mechanical Impact Resistance Product Identification Terminal Identification Environmental Flammability Ingress Protection Moisture Resistance Operating Temperature Withstands 3,000V AC Per CSA C22.2, No. 182.1, UL 1682 Identification and ratings are permanently fastened to the device housing Terminals identified in accordance with North American and IEC conventions V-0 Type 3R, 3RX, 4X and IP68, IP69K IEC 60309-1 Maximum Continuous 75C; Minimum - 40C w/o impact Complementary Products Closure Cap Cord Clamp and Locking Ring Liquidtight Adapters Online Resources Customer Drawing Installation Instructions Hubbell Wiring Device-Kellems * Hubbell Incorporated (Delaware) * 40 Waterview Drive * Shelton, CT 06484 * Phone (800) 288-6000 * FAX (800) 255-1031 Printed in U.S.A. Specifications subject to change without notice.