Mixed Signal Oscilloscopes
MSO5000B, DPO5000B Series Datasheet
Designing with today’s faster data rates and tighter timing margins requires
an oscilloscope with outstanding signal acquisition performance and
analysis capabilities. Tektronix MSO/DPO5000B Series oscilloscopes
provide exceptional signal fidelity, with 2 GHz bandwidth and 10 GS/s
sample rate, along with advanced analysis and math capabilities, on your
bench and in your lab. Run Windows®-based analysis software right on the
oscilloscope. Point and click Visual Triggers enable you to capture complex
signals with ease. MSO models include 16 digital timing channels, and all
models can be equipped to decode common serial protocols, providing a
comprehensive view of your systems.
Key performance specifications
2 GHz, 1 GHz, 500 MHz, and 350 MHz bandwidth models
Up to 10 GS/s real-time sample rate on one or two channels and up to
5 GS/s on all four channels
Up to 250 megapoint record length with MultiView zoom™
>250,000 wfms/s maximum waveform capture rate with FastAcq™
acquisition
FastFrame™ segmented memory acquisition mode with up to
290,000 segments and >310,000 waveforms per second capture rate
Standard 10 MΩ passive voltage probes with less than 4 pF capacitive
loading and 500 MHz or 1 GHz analog bandwidth
>11 bits vertical resolution using HiRes sampling
User-selectable bandwidth limit and DSP filters for lower noise and
better measurement accuracy
Key analysis features
Wave inspector® controls provide easy navigation and automated
search of waveform data
Suite of advanced triggers, with standard Visual Trigger and Search
53 automated measurements, selectable filtering, waveform math and
FFT analysis
Waveform histogram, eye diagram, TIE (jitter/timing) measurement and
analysis
User-definable math using MATLAB, Visual Studio and Excel
Optional analysis for memory, advanced jitter, serial data, power and
Wideband RF
Key protocol features
Trigger and decode options for mid-speed (100 Mb/s to 1 Gb/s) buses
Trigger and decode options for low-speed (<10 Mb/s) buses
Compliance test options for USB2.0, Ethernet, USB power, MOST,
BroadR-Reach
Mask testing on communication, computing and video standards
Mixed signal design and analysis (MSO Series)
16 digital channels (user upgradeable)
MagniVu™ high-speed acquisition provides 60.6 ps timing resolution on
all digital channels
Automated triggering, decode, and search on parallel buses
Per-channel threshold settings
www.tektronix.com 1
See the performance difference
With up to 2 GHz analog bandwidth and sampling rates up to 10 GS/s, the
MSO/DPO5000B series ensures you have the performance you need to
capture waveforms with the best possible signal fidelity and resolution for
seeing small waveform details.
Performance - With up to 2 GHz bandwidth and 10 GS/s sample rate capture
USB2.0 480 Mb/s differential signals with true fidelity and 100 ps resolution.
Accurate high-speed probing
The TPP Series probes, included standard with every MSO/DPO5000B
Series oscilloscope, provide up to 1 GHz of analog bandwidth, and less
than 4 pF of capacitive loading. The extremely low capacitive loading
minimizes adverse effects on your circuits and is more forgiving of longer
ground leads. And with the probe's wide bandwidth, you can see the high
frequency components in your signal, which is critical for high-speed
applications. The TPP Series passive voltage probes offer all the benefits
of general-purpose probes like high dynamic range, flexible connection
options, and robust mechanical design, while providing the performance of
active probes.
Probing - Up to 1 GHz bandwidth and less than 4 pF capacitive loading provides active
probe performance and superior performance over passive probes included with other
mid-range oscilloscopes.
Fast discovery
To debug a design problem, first you must know it exists. Every design
engineer spends time looking for problems in their design, a time-
consuming and difficult task without the right debug tools. The MSO/
DPO5000B Series offers the industry's most complete performance to
capture and isolate events, providing fast insight into the real operation of
your device. Tektronix proprietary FastAcq™ technology delivers a fast
waveform capture - greater than 250,000 waveforms per second - that
enables you to see glitches and other infrequent transients within seconds,
revealing the true nature of device faults. A digital phosphor display with
color intensity grading shows the history of a signal's activity by using color
to identify areas of the signal that occur more frequently, providing a visual
display of just how often anomalies occur across all channels.
Discover – fast waveform capture rate - over 250,000 wfm/s - maximizes the probability
of capturing elusive glitches and other infrequent events.
Datasheet
2 www.tektronix.com
High vertical resolution
If the measurement requirement is to capture high-amplitude signals while
seeing smaller signal details the MSO/DPO5000B provides the acquisition
flexibility needed to capture the signals of interest while removing the
effects of unwanted noise. With HiRes acquisition vertical resolution can be
increased to over 11 bits while reducing signal noise. Signal fidelity can be
further increased by using channel input filters or applying a wide choice of
DSP filters.
Capture - HiRes acquisition - increased vertical resolution to >11 bits while removing
noise on a 650 V Pk-Pk signal while seeing the smaller details of less than 1 V Pk-Pk
with or without apply low-pass filtering.
Long record length
With up to a 250 M point record length, you can capture many events of
interest, even thousands of serial packets, in a single acquisition for further
analysis while maintaining high resolution to zoom in on fine signal details.
For complex analysis like Time Interval Error (TIE) measurements the
longer record length ensures you have enough data captured for handling
clock recovery and creating jitter profiles. Unlike other oscilloscopes in its
class, the MSO/DPO5000B provides flexible setup of both record length
and sampling rate to ensure optimum resolution.
Capture - 100 Meg point acquisition with HiRes acquisition - increase vertical resolution
to >11 bits with dual zoom of waveform details.
Segmented memory
For more efficient data capture, partitioning of memory can extend the total
time captured. FastFrame™ Segmented Memory mode enables you to
select up to 290,000 memory segments with a trigger capture rate of over
310,000 triggers per second. Beyond memory flexibility, segments are time
stamped and can be viewed individually or as an overlay and analyzed
using advanced features like protocol decoding.
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 3
FastFrame™ - User selectable memory segments allow for efficient memory
management with time stamped capture of SPI bus data along with analysis of serial bus
decoding on multiple data packets. Frames 1, 2, and 9 are shown here.
Mixed signal design and analysis (MSO
Series)
The MSO5000B Series mixed-signal oscilloscopes provide 16 digital
channels. These channels are tightly integrated into the oscilloscope's user
interface, simplifying operation and making it possible to solve mixed-signal
issues easily. MSO functionality can also be added later as a user upgrade.
Color-coded digital waveform display
The MSO5000B Series has redefined the way you view digital waveforms.
One common problem with other mixed-signal oscilloscopes is determining
if data is a one or a zero when zoomed in far enough that the digital trace
stays flat all the way across the display. To avoid this problem, the
MSO5000B Series has color-coded digital traces, displaying ones in green
and zeros in blue.
With the color-coded digital waveform display, low values are shown in blue and high
values are shown in green, enabling instant understanding of the bus value whether
transitions are visible or not.
The multiple transition detection hardware of the MSO5000B Series will
show you when the system detects more than one transition. This indicates
that more information is available by zooming in or acquiring at faster
sampling rates. In most cases zooming in will reveal a glitch that was not
viewable with the previous settings.
MagniVu™ high-speed acquisition
The main digital acquisition mode on the MSO5000B Series will capture up
to 40 M points at 500 MS/s (2 ns resolution). In addition to the main record,
the MSO5000B provides an ultra high-resolution record called MagniVu
which acquires 10,000 points at up to 16.5 GS/s (60.6 ps resolution). Both
the main and MagniVu waveforms are acquired on every trigger and either
can be displayed at any time, running or stopped. MagniVu provides
significantly finer timing resolution than comparable mixed-signal
oscilloscopes on the market, instilling confidence when making critical
timing measurements on digital waveforms.
Datasheet
4 www.tektronix.com
The MagniVu high-resolution record provides 60.6 ps timing resolution, enabling you to
make critical timing measurements on your digital waveforms.
Versatile trigger and search
Discovering a device fault is only the first step. Next, you must capture the
event of interest to identify root cause The MSO/DPO5000B Series
provides a complete set of triggers - including runt, glitch, width, timeout,
transition, pattern, state, setup/hold violation, serial packet, and parallel
data - to help quickly find your event.
Visual trigger
Finding the right characteristic of a complex signal can require hours of
collecting and sorting through thousands of acquisitions for the event of
interest. Defining a trigger that isolates the desired event and shows data
only when the event occurs speeds up this process. Visual Trigger and
Search makes the identification of the desired waveform events quick and
easy by scanning through all waveform acquisitions and comparing them to
on-screen areas (geometric shapes). Areas can be created using a variety
of shapes including triangles, rectangles, hexagons, trapezoids, and user-
specified shapes to fit the area to the particular trigger behavior desired.
Set up to eight areas and condition based on Boolean logic conditions.
Visual Trigger- Capture signals on two channels with Visual triggering with multiple
defined areas and markers showing repeat occurrences.
Navigation and search
Finding your event of interest in a long waveform record can be time
consuming without the right search tools. With today's record lengths
pushing beyond a million data points, locating your event can mean
scrolling through thousands of screens of signal activity.
The MSO/DPO5000B Series offers the industry's most comprehensive
search and waveform navigation with its innovative Wave Inspector®
controls. These controls speed panning and zooming through your record.
With a unique force-feedback system, you can move from one end of your
record to the other in just seconds. User marks allow you to mark any
location that you may want to reference later for further investigation. Or,
automatically search your record for criteria you define. Wave Inspector will
instantly search your entire record, including analog, digital, and bus data.
Along the way it will automatically mark every occurrence of your defined
event so you can quickly move between events. The standard Advanced
Search and Mark capability of the MSO/DPO5000B Series can even search
for up to eight different events simultaneously and stop a live acquisition
when it finds an event of interest, saving even more time.
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 5
Search - Results of an advanced search for a runt pulse or a narrow glitch within a long
waveform record.
Comprehensive analysis
Verifying that your prototype's performance matches simulations and meets
the project's design goals requires analyzing its behavior. Tasks can range
from simple checks of rise times and pulse widths to sophisticated power
loss analysis, characterization of system clocks, and investigation of noise
sources. The MSO/DPO5000B Series offers a comprehensive set of
integrated analysis tools including waveform- and screen-based cursors,
53 automated measurements, advanced waveform math including arbitrary
equation editing, waveform histograms, and FFT analysis.
Analyze - Waveform histogram of the rising and falling edge of a 622 Mb/s signal
showing the distribution of edge position (jitter) over time. Included are numeric
measurements made on the waveform histogram data.
The standard limit test package enables long-term signal monitoring,
characterizing signals during design, and production line testing. Limit test
compares a tested signal to a known good or "golden" version of the same
signal with user-defined vertical and horizontal tolerances. You can tailor a
limit test to your specific requirements by defining test duration in a number
of waveforms, setting a violation threshold that must be met before
considering a test a failure, counting hits with statistical information, and
setting actions upon violations, test failure, and test complete.
Custom analysis
When signal analysis needs extend beyond the standard or optional
analysis features, the Windows 7 based MSO/DPO5000B series has the
flexibility to support custom analysis. Apply your custom algorithms using
custom MATLAB and .NET math plug-ins for analysis functions that are
integrated in the oscilloscope user interface for more seamless operation.
Custom analysis - Waterfall display generated from oscilloscope data using MATLAB.
Jitter analysis
Every MSO/DPO5000B Series oscilloscope includes the DPOJET
Essentials jitter and eye pattern analysis software package, extending the
oscilloscope's measurement capabilities to take measurements over
contiguous clock and data cycles in a single-shot real-time acquisition. This
enables measurement of key jitter and timing analysis parameters such as
Time Interval Error and Phase Noise to help characterize possible system
timing issues. Analysis tools such as plots for time trends and histograms
quickly show how timing parameters change over time, and spectrum
analysis quickly shows the precise frequency and amplitude of jitter and
modulation sources.
Datasheet
6 www.tektronix.com
Jitter analysis - TIE jitter/timing analysis of 622 Mb/s signal
Extend jitter/timing analysis with the optional DPOJET Advanced software
package (Option DJA). DPOJET Advanced adds advanced tools such as
Rj/Dj separation, eye diagram masks, and Pass/Fail limits for conformance
testing. DPOJET Advanced is also a measurement framework that works
with standards-specific compliance test packages for applications such as
DDR memory and USB.
Power analysis (optional)
The optional power analysis software package (Option PWR) enables quick
and accurate analysis of power quality, switching loss, harmonics, magnetic
measurements, safe operating area (SOA), modulation, ripple, and slew
rate (di/dt, dv/dt). Automated, repeatable power measurements are
available with a touch of a button; no external PC or complex software
setup is required. The package includes a report generation tool to create
customizable, detailed reports to document your measurement results.
Power- B-H plot.
DDR memory bus analysis (optional)
The optional DDR memory analysis software package (Option DDRA)
automatically identifies DDR1, DDR2, LP-DDR, and LP-DDR2 Reads and
Writes and makes JEDEC conformance measurements with Pass/Fail
results on all edges in every Read and Write burst, perfect for debugging
and troubleshooting DDR memory buses. Also provided are common
measurements of clock, address, and control signals. Used with DPOJET
(Option DJA), Option DDRA is the fastest way to debug complex memory
signaling issues.
Vector signal analysis (optional)
The optional SignalVu™ vector signal analysis package (Option SVE) easily
validates wideband designs and characterizes wideband spectral events.
By combining the signal analysis engine of Tektronix real-time spectrum
analyzers with the wide bandwidth acquisition of Tektronix digital
oscilloscopes, you can now evaluate complex baseband signals directly on
your oscilloscope. You get the functionality of a vector signal analyzer, a
spectrum analyzer, and the powerful trigger capabilities of a digital
oscilloscope - all in a single package. Whether your design validation needs
include wideband radar, high data-rate satellite links, or frequency hopping
communications, SignalVu™ vector signal analysis software can speed
your time-to-insight by showing you time-variant behavior of these
wideband signals.
SignalVu™ enables detailed analysis in multiple domains.
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 7
Protocol triggering and analysis (optional)
On a serial bus, a single signal often includes address, control, data, and
clock information. This can make isolating events of interest difficult. The
MSO/DPO5000B Series offers a robust set of tools for debugging serial
buses with automatic trigger and decode on I2C, SPI, CAN, LIN, FlexRay,
RS-232/422/485/UART, MIL-STD-1553, Ethernet, and USB 2.0, and
decode for HSIC, 8b/10b, PCI Express, and MIPI D-PHY DSI-1 and
CSI-2 serial buses.
Triggering on a USB full-speed serial bus. A bus waveform provides decoded packet
content including Start, Sync, PID, Address, End Point, CRC, Data values, and Stop.
Serial triggering
Trigger on packet content such as start of packet, specific addresses,
specific data content, unique identifiers, etc. on popular serial interfaces
such as I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-
STD-1553, Ethernet, and USB 2.0.
Bus display
Provides a higher-level, combined view of the individual signals (clock,
data, chip enable, etc.) that make up your bus, making it easy to identify
where packets begin and end and identifying subpacket components such
as address, data, identifier, CRC, etc.
Bus decoding
Tired of having to visually inspect the waveform to count clocks, determine
if each bit is a 1 or a 0, combine bits into bytes, and determine the hex
value? Let the oscilloscope do it for you! Once you've set up a bus, the
MSO/DPO5000B Series will decode each packet on the bus, and display
the value in hex, binary, decimal (USB only) or ASCII (USB and
RS-232/422/485/UART only) in the bus waveform.
Event table display
In addition to seeing decoded packet data on the bus waveform itself, you
can view all captured packets in a tabular view much like you would see in
a software listing. Packets are time stamped and listed consecutively with
columns for each component (Address, Data, etc.).
Event table showing decoded SPI serial packet data with bus timing waveform for a long
acquisition.
Compliance testing
Serial bus compliance test (optional)
Software packages for automated compliance test are available for
Ethernet 10BASE-T, 10BASE-Te, 100BASE-TX, and 1000BASE-T (Option
ET3), MOST50 and MOST150 electrical (Option MOST), BroadR-Reach
(Option BRR), and USB 2.0 (Option USB) physical-layer devices. These
software packages enable you to conduct testing using the standard's
specified compliance tests.
Datasheet
8 www.tektronix.com
Mask testing
The optional mask test (Option MTM) software package is useful for long-
term signal monitoring, characterizing signals during design, and production
line testing. The mask test software includes a robust set of masks for
telecommunications and computer standards for easily checking
compliance to a standard. Additionally, custom masks can be created and
used for characterizing signals. With mask testing you can tailor a test to
your specific requirements by defining test duration in a number of
waveforms, setting a violation threshold that must be met before
considering a test a failure, counting hits with statistical information, and
setting actions upon violations, test failure, and test complete.
Designed to make your work easier
Large, high-resolution touchscreen display
The MSO/DPO5000B Series features a 10.4 in. (264 mm) XGA color
display with an integrated touch screen for seeing intricate signal details.
High resolution display quality with touch screen, mouse and stylus operation.
Dedicated front panel controls
Per-channel vertical controls provide simple and intuitive operation. No
longer do you need to share one set of vertical controls across all four
channels.
Floating licenses
Floating licenses offer an alternative method to manage your Tektronix
asset. Floating licenses allow license-key enabled options to be easily
moved among all your MSO/DPO5000, DPO7000, and DPO/DSA/
MSO70000 Series of Tektronix oscilloscopes. Floating licenses are
available for many license-key enabled options. To order a floating version
of an option license add “DPOFL-“ prefix to the option name. (e.g. DPOFL-
ET3)
Check www.tektronix.com for additional information about floating license
options.
Easy data storage
Two USB 2.0 host ports on the front panel enable easy transfer of
screenshots, instrument settings, and waveform data to a USB flash drive.
The rear panel contains four additional USB 2.0 host ports and a USB
device port for controlling the oscilloscope remotely from a PC or for
connecting USB peripherals. An integrated 10/100/1000BASE-T Ethernet
port enables easy connection to networks and a Video Out port to drive an
external monitor or projector. A standard ≥ 480 GB removable solid state
disk drive makes customizing settings for different users easy and enables
use in secure environments.
Connectivity and remote operation
There are many ways to connect to your MSO/DPO5000B Series
oscilloscope to conduct extended analysis. The first makes use of the
Windows Remote Desktop capability – connect directly to your oscilloscope
and operate the user interface remotely through the built-in Remote
Desktop. A second way to connect is through Tektronix OpenChoice®
software which makes use of the fast embedded bus, transferring
waveform data directly from acquisition to analysis applications on the
Windows desktop at much faster speeds than conventional GPIB transfers.
Industry-standard protocols, such as TekVISA™ interface and ActiveX
controls are included for using and enhancing Windows applications for
data analysis and documentation. IVI-COM instrument drivers are included
to enable easy communication with the oscilloscope using GPIB, serial
data, and LAN connections from programs running on the instrument or an
external PC. Or, use the Software Developer's Kit (SDK) to help create
custom software to automate multistep processes in waveform collection
and analysis with Visual BASIC, C, C++, MATLAB, LabVIEW,
LabWindows/CVI, and other common Application Development
Environments (ADE). Microsoft® Excel and Word toolbars are included to
simplify data capture and transfer directly to these programs running on the
Windows desktop.
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 9
Tektronix Mid-range Oscilloscopes
Need more performance or have other application needs? Consider the
MDO/MSO/DPO4000 series or the DPO7000 series.
For more performance, the DPO7000C series offers:
500 MHz to 3.5 GHz bandwidth
Up to 40 GS/s sampling rate
Up to 500 M point record length
1 % accuracy
More analysis and compliance support for higher data rates
Microsoft Windows 7
For mixed-domain analysis or greater portability, the MDO/MSO/
DPO4000B series offers:
100 MHz to 1 GHz bandwidth
Up to 5 GS/s sampling
Up to 20 M point record length
Serial data trigger and decode
Built-in 3 GHz or 6 GHz spectrum analyzer (MDO models)
2 or 4 analog channels and 16 digital channels (MSO and MDO
models)
Datasheet
10 www.tektronix.com
Specifications
All specifications apply to all models unless noted otherwise.
Model overview
MSO5034B
DPO5034B
MSO5054B
DPO5054B
MSO5104B
DPO5104B
MSO5204B
DPO5204B
Input Channels 4
Bandwidth 350 MHz 500 MHz 1 GHz 2 GHz
Rise Time (Calculated) 1 ns 700 ps 350 ps 175 ps
DC Gain Accuracy ±1.5%, derated at 0.10%/°C above 30 °C
Bandwidth Limits Depending on instrument model: 1 GHz, 500 MHz, 350 MHz, 250 MHz, and 20 MHz
Effective Number of Bits (Typical) 6 bits (10 divisionp-p sine wave input at instrument bandwidth, 100 mV/div, 50 Ω Input Impedance, maximum sample rate, 1 k
point record length)
Random Noise (RMS, typical, sample mode, full BW)
1 MΩ ≤(130 μV + 8.0% of V/div
setting)
≤(130 μV + 8.0% of V/div
setting)
≤(150 μV + 8.0% of V/div
setting)
≤(180 μV + 8.0% of V/div
setting)
50 Ω ≤(130 μV + 8.0% of V/div
setting)
≤(130 μV + 8.0% of V/div
setting)
≤(75 μV + 6.0% of V/div
setting)
≤(150 μV + 6.0% of V/div
setting)
Maximum Sample Rate (All channels) 5 GS/s 5 GS/s 5 GS/s 5 GS/s
Maximum Sample Rate (1 or
2 channels)
– – 10 GS/s 10 GS/s
Maximum Equivalent Time Sampling
Rate
400 GS/s
Maximum Record Length with
Standard Configuration
25 M 25 M (4 ch)
50 M (1 or 2 ch)
Maximum Record Length with Option
5RL
50 M 50 M (4 ch)
125 M (1 or 2 ch)
Maximum Record Length with Option
10RL
125 M 125 M (4 ch)
250 M (1 or 2 ch)
Vertical system analog channels
Input coupling AC, DC
Input resistance 1 MΩ ±1%, 50 Ω ±1%
Input sensitivity range 1 MΩ: 1 mV/div to 10 V/div
50 Ω: 1 mV/div to 1 V/div
Vertical resolution 8 bits (>11 bits with Hi Res)
Maximum input voltage, 1 MΩ 300 VRMS CAT II, with peaks ≤ ±425 V
For <100 mV/div derate at 20 dB/decade above 100 kHz to 30 VRMS at 1 MHz, 10 dB/decade above 1 MHz
For ≥100 mV/div derate at 20 dB/decade above 3 MHz to 30 VRMS at 30 MHz, 10 dB/decade above 30 MHz
Maximum input voltage, 50 Ω 5 VRMS, with peaks ≤ ±20 V
Position range ±5 divisions
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 11
Delay between any Two Channels
(Typical)
≤100 ps (50 Ω, DC coupling and equal V/div at or above 10 mV/div)
Offset range
1 mV/div - 50 mV/div 1 MΩ: ±1 V
50 Ω: ±1 V
50.5 mV/div - 99.5 mV/div 1 MΩ: ±0.5 V
50 Ω: ±0.5 V
100 mV/div - 500 mV/div 1 MΩ: ±10 V
50 Ω: ±10 V
505 mV/div - 995 mV/div 1 MΩ: ±5 V
50 Ω: ±5 V
1 V/div - 5 V/div 1 MΩ: ±100 V
50 Ω: ±5 V
5.05 V/div - 10 V/div 1 MΩ: ±50 V
50 Ω: NA
Offset Accuracy ±(0.005 × |offset – position| + DC Balance)
Note: Both position and constant offset term must be converted to volts by multiplying by the appropriate volts/div term
Channel-to-channel isolation (Any
two channels at equal vertical
scale settings) (typical)
≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated BW
Vertical system digital channels
Input Channels 16 Digital (D15 - D0)
Thresholds Per-channel Thresholds
Threshold Selections TTL, ECL, User
User-defined Threshold Range ±40 V
Threshold Accuracy ±(100 mV + 3% of threshold setting)
Maximum Input Voltage ±42 Vpeak
Input Dynamic Range 30 Vp-p ≤200 MHz
10 Vp-p >200 MHz
Minimum Voltage Swing 400 mV
Input Impedance 100 kΩ
Probe Loading 3 pF
Vertical Resolution 1 bit
Datasheet
Vertical system analog channels
12 www.tektronix.com
Horizontal system analog channels
Maximum Duration at Highest
Real-Time Sample Rate
25 ms
Time Base Range 12.5 ps/div to 1000 s/div
Time resolution (in ET/IT mode) 2.5 ps/div
Time base delay time range –10 divisions to 1000 s
Channel-to-channel deskew range ±75 ns
Time base accuracy ±5 ppm over any ≥1 ms interval
Horizontal system digital channels
Maximum Sample Rate (Main) 500 MS/s (2 ns resolution)
Maximum record length (main) 25 M Standard
Up to 40 M with Record Length options
Maximum sample rate (MagniVu) 16.5 GS/s (60.6 ps resolution)
Maximum record length (MagniVu) 10k points centered around the trigger
Minimum detectable pulse width 1 ns
Channel-to-channel skew (typical) 200 ps
Maximum input toggle rate 500 MHz at minimum input swing; higher toggle rates can be achieved at higher amplitudes
Trigger system
Main trigger modes Auto, Normal, and Single
Trigger coupling DC, AC, HF Rej (attenuates >50 kHz), LF Rej (attenuates <50 kHz), Noise Reject (reduces sensitivity)
Trigger holdoff range 250 ns to 8 s
Enhanced triggering User-selectable; corrects the difference in timing between the trigger path and the acquired data (not available in FastAcq)
Trigger jitter ≤100 fsRMS using Enhanced Trigger
≤10 psRMS without Enhanced Trigger and in Fast Acq mode
≤100 psRMS for non-Edge-type trigger modes
Trigger sensitivity
Internal DC coupled For 1 MΩ: 1 mV/div to 4.98 mV/div: 0.75 div from DC to 50MHz, increasing to 1.3 div at instrument bandwidth ≥5 mV/div: 0.40 div
from DC to 50 MHz, increasing to 1 div at instrument bandwidth
For 50 Ω (MSO5204, DPO5204, MSO5104, DPO5104): 0.40 div from DC to 50 MHz, increasing to 1 div at instrument bandwidth
For 50 Ω (MSO5054, DPO5054, MSO5034, DPO5034): 1 mV/div to 4.98 mV/div: 0.75 div from DC to 50MHz, increasing to 1.3 div
at instrument bandwidth ≥5 mV/div: 0.40 div from DC to 50 MHz, increasing to 1 div at instrument bandwidth
External (auxiliary input) 1 MΩ 200 mV from DC to 50 MHz, increasing to 500 mV at 250 MHz
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 13
Trigger level range
Any channel ±8 divisions from center of screen
External (auxiliary input) ±8 V
Line Fixed at about 50% of line voltage
Trigger modes
Edge Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise
reject
Glitch Trigger on or reject glitches of positive, negative, or either polarity. Programmable glitch width is 4 ns minimum to 8 s maximum
Runt Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again
Width Trigger on width of positive or negative pulse either within or outside selectable limits (4 ns to 8 s)
Timeout Trigger on an event which remains high, low, or either, for a specified time period (4 ns to 8 s)
Transition Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either
Setup/Hold Trigger on violations of both setup time and hold time between clock and data present on any two input channels
Pattern Trigger when any logical pattern of signals goes false or stays true for specified period of time (4 ns to 1 s). Pattern (AND, OR,
NAND, NOR) specified for all analog and digital input channels defined as High, Low, or Don't Care
Parallel Bus Trigger on specified data value on defined parallel bus
State Any logical pattern of analog channels and digital channels (MSO models) clocked by edge on another channel. Trigger on rising
or falling clock edge
Video Any logical pattern of analog channels and digital channels (MSO models) clocked by edge on another channel. Trigger on rising
or falling clock edge
Trigger Sequences Main, Delayed by Time, Delayed by Events. All sequences can include separate horizontal delay after the trigger event to position
the acquisition window in time
A/B Sequence Event Trigger
Types
Edge
Trigger Delay by Time 4 ns to 8 s
Trigger Delay by Events 1 to 4,000,000 events
Visual Trigger Trigger on up to 8 user-specified areas, including rectangle, triangle, trapezoid, hexagon, and user-specified shapes on any of the
analog channels
I2C (Optional) Provided as part of Opt. SR-EMBD. Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address
and Data on I2C buses up to 10 Mb/s
SPI (Optional) Provided as part of Opt. SR-EMBD. Trigger on Slave Select, Idle Time, or Data (1-16 words) on SPI buses up to 10 Mb/s
CAN (Optional) Provided as part of Opt. SR-AUTO. Trigger on Start of Frame, Type of Frame (Data, Remote, Error, or Overload), Identifier, Data,
Identifier and Data, EOF, Missing Ack, Bit Stuff Error, and CRC Error on CAN buses up to 1 Mb/s
LIN (Optional) Provided as part of Opt. SR-AUTO. Trigger on Sync, Identifier, Data, Identifier and Data, Wakeup Frame, Sleep Frame, and Error
on LIN buses up to 1 Mb/s
FlexRay (Optional) Provided as part of Opt. SR-AUTO. Trigger on Indicator Bits (Normal, Payload, Null, Sync, Startup), Cycle Count, Header Fields
(Indicator Bits, Identifier, Payload Length, Header CRC, and Cycle Count), Identifier, Data, Identifier and Data, End Of Frame, and
Error on FlexRay buses up to 10 Mb/s
MIL-STD-1553 (Optional) Provided as part of Opt. SR-AERO. Trigger on Sync, Command Word, Status Word, Data Word, Idle Time, and Error on MIL-
STD-1553 buses up to 1 Mb/s
Ethernet (Optional) Provided as part of Opt. SR-ENET. Trigger on Start of Packet, MAC Address, MAC Q-tag, MAC Length/Type, MAC Data, IP
Header, TCP Header,
TCP/IPV4 Data, End of Packet, and FCS(CRC) Error on 10BASE-T and 100BASE-TX buses.
RS-232/422/485/UART
(Optional)
Provided as part of Opt. SR-COMP. Trigger on Start Bit, End of Packet, Data, and Parity Error up to 10 Mb/s
Datasheet
Trigger system
14 www.tektronix.com
USB 2.0 Low Speed:
(Optional)
Provided as part of Opt. SR-USB.
Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special
Packet, Error.
Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token
types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside a range. Frame number
can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.
Data Packet Trigger – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, != a particular data
value, or inside or outside a range.
Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL.
Special Packet Trigger – Any special type, Reserved.
Error Trigger – PID Check, CRC5 or CRC16, Bit Stuffing.
USB 2.0 Full Speed: (Optional) Provided as part of Opt. SR-USB.
Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special
Packet, Error.
Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token
types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside a range. Frame number
can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.
Data Packet Trigger – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, != a particular data
value, or inside or outside a range.
Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL.
Special Packet Trigger – Any special type, PRE, Reserved.
Error Trigger – PID Check, CRC5 or CRC16, Bit Stuffing.
USB 2.0 High Speed:
(Optional)
Provided as part of Opt. SR-USB.
Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special
Packet, Error.
Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token
types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside a range. Frame number
can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.
Data Packet Trigger – Any data type, DATA0, DATA1, DATA2, DATAM; Data can be further specified to trigger on ≤, <, =, >, ≥, !=
a particular data value, or inside our outside a range.
Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL, NYET.
Special Packet Trigger – Any special type, ERR, SPLIT, PING, Reserved. SPLIT packet components that can be specified include:
Hub Address
Start/Complete – Don't Care, Start (SSPLIT), Complete (CSPLIT) Port Address
Start and End bits – Don't Care, Control/Bulk/Interrupt (Full-speed Device, Low-speed Device), Isochronous (Data is Middle, Data
is End, Data is Start, Data is All)
Endpoint Type – Don't Care, Control, Isochronous, Bulk, Interrupt
Error Trigger – PID Check, CRC5, CRC16, Any.
Note: USB 2.0 High-speed triggering, decoding, and search only available on 1 GHz and 2 GHz models.
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
Trigger system
www.tektronix.com 15
Acquisition system
Acquisition modes
Sample Acquire sampled values
Peak detect Captures narrow glitches as narrow as 100 ps (2 GHz and 1 GHz models) or 200 ps (500 MHz and 350 MHz models) at all real-
time sampling rates
Averaging From 2 to 10,000 waveforms included in average
Envelope Min-Max envelope reflecting Peak Detect data over multiple acquisitions
Hi-Res Real-time boxcar averaging reduces random noise and increases resolution
Roll mode Scrolls sequential waveform points across the display in a right-to-left rolling motion at sweep speeds slower than 50 ms/div. Up to
20 MS/s with a maximum record length of 10 M
FastAcq®FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events
Maximum FastAcq waveform
capture rate
>250,000 wfms/s on all 4 channels simultaneously
Waveform database Accumulate waveform database providing three-dimensional array of amplitude, time, and counts
FastFrame®Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival recorded with
each event. Frame finder tool helps to visually identify transients
Automated Search and Mark Automatically mark events and document waveforms. Search positive/negative slopes or both, glitches, runts, pulse widths,
transition rate, setup and hold, timeout, windows, or find any logic or state pattern, up to 8 different event types on any of the
4 analog channels. Search DDR Read or Write bursts with Opt. DDRA. Event table summarizes all found events. All events are
time stamped in reference to trigger position. Stop acquisitions when an event is found
Waveform analysis
Waveform measurements
Cursors Waveform and Screen
Automatic measurements 53, of which 8 can be displayed on-screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time, Fall
Time, Positive Duty Cycle, Negative Duty Cycle, Positive Width, Negative Width, Burst Width, Phase, Positive Overshoot, Negative
Overshoot, Peak-to-Peak, Amplitude, High, Low, Maximum, Minimum, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area
Eye-pattern measurements Extinction Ratio (absolute, %, dB), Eye Height, Eye Width, Eye Top, Eye Base, Crossing %, Jitter (p-p, RMS, 6sigma), Noise (p-p,
RMS), Signal/Noise Ratio, Cycle Distortion, Q-Factor
Measurement statistics Mean, Minimum, Maximum, Standard Deviation
Reference levels User-definable reference levels for automatic measurements can be specified in either percent or units
Gating Isolate the specific occurrence within an acquisition to take measurements on, using either screen or waveform cursors
Waveform histogram A waveform histogram provides an array of data values representing the total number of hits inside a user-defined region of the
display. A waveform histogram is both a visual graph of the hit distribution and a numeric array of values that can be measured.
Sources – Channel 1, Channel 2, Channel 3, Channel 4, Ref 1, Ref 2, Ref 3, Ref 4,Math 1,Math 2,Math 3,Math 4
Types – Vertical, Horizontal
Waveform histogram
measurements
Waveform Count, Hits in Box, Peak Hits, Median, Maximum, Minimum, Peak-to-Peak, Mean (μ), Standard Deviation (sigma),
μ +1sigma, μ +2sigma, μ +3sigma
Waveform processing/math
Arithmetic Add, Subtract, Multiply, Divide waveforms and scalars
Algebraic expressions Define extensive algebraic expressions including waveforms, scalars, user-adjustable variables, and results of parametric
measurements. Perform math on math using complex equations. e.g. (Integral (CH1 – Mean(CH1)) × 1.414 × VAR1)
Math functions Average, Invert, Integrate, Differentiate, Square Root, Exponential, Log10, Log e, Abs, Ceiling, Floor, Min, Max, Sin, Cos, Tan,
ASin, ACos, ATan, Sinh, Cosh, Tanh
Relational Boolean result of comparison >, <, ≥, ≤, ==, !=
Frequency domain functions
(FFT)
Spectral Magnitude and Phase, Real and Imaginary Spectra
FFT vertical units Magnitude: Linear, dB, dBm
Phase: Degrees, radians, group delay
Datasheet
16 www.tektronix.com
FFT window functions Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential
Waveform definition As an arbitrary math expression
Filtering functions User-definable filters. Users specify a filter containing the coefficients of the filter. Filter files provided
Custom math functions Custom MATLAB and .NET plug-ins can be included in the math waveform definition
Mask function A function that generates a waveform database pixmap from a sample waveform. Sample count can be defined
Software
IVI driver Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI,
Microsoft .NET and MATLAB. IVI-COM standard
LXI Class C web interface Connect to the MSO/DPO5000B Series through a standard Web browser by simply entering the oscilloscope's IP address in the
address bar of the browser. The web interface enables viewing of instrument status and configuration, as well as status and
modification of network settings. All web interaction conforms to LXI Class C specification
Display system
Display type 10.4 in. (264 mm) liquid-crystal active-matrix color display with touch screen
Display resolution 1024 horizontal × 768 vertical pixels (XGA)
Waveform styles Vectors, dots, variable persistence, infinite persistence
Color palettes Normal, green, gray, temperature, spectral, and user defined
Display format YT, XY
Computer system
Operating system Windows 7 Ultimate 64-bit
Instrument operation verified with version 1.1 of the National Institute of Standards and Technology (NIST) DSS Baseline
Requirements, also known as the United States Government Configuration Baseline (USGCB)
CPU Intel Core 2 Duo, ≥2 GHz processor
PC system memory ≥4 GB
Solid state disk drive Removable solid state disk drive, ≥480 GB
Mouse Optical wheel mouse, USB interface
Keyboard Order 119-7083-xx for small keyboard; USB interface and hub
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
Waveform analysis
www.tektronix.com 17
Input output ports
USB 2.0 High-speed host ports Supports USB mass storage devices, printers, keyboard, and mouse. Two ports on front and four ports on rear of instrument. Can
be disabled individually
USB 1.1 Full-speed device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488 adapter)
LAN port RJ-45 connector, supports 10/100/1000BASE-T
Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. Support for extended
desktop and clone mode
Audio ports Miniature phono jacks
Keyboard port PS/2 compatible
Mouse port PS/2 compatible
Auxiliary input Front-panel BNC connector. Input impedance 1 MΩ. Max input 300 VRMS with peaks ≤ ±425 V
Auxiliary out (software switchable) Trigger Out: A TTL compatible pulse when the oscilloscope triggers
Time Base Reference Out: A TTL compatible output of internal 10 MHz reference oscillator
External reference in Time base system can phase lock to an external 10 MHz reference (10 MHz ±1%)
Probe compensator output Front-panel pins
Amplitude: 2.5 V
Frequency: 1 kHz
LAN eXtensions for
Instrumentation (LXI)
Class: LXI Class C Version: 1.3
Optional TekVPI® external power
supply
Required when total oscilloscope probe power usage exceeds 15 W.
Output Voltage 12 V
Output Current 5 A
Power Consumption 50 W
Power source
Power source voltage 100 to 240 V ±10%
Power source frequency 45 Hz to 66 Hz (85 to 264 V)
360 Hz to 440 Hz (100 to 132 V)
Power consumption 275 W maximum
Datasheet
18 www.tektronix.com
Physical characteristics
Dimensions mm in.
Height 233 9.16
Width 439 17.29
Depth 206 8.12
Weight kg lb.
Net 6.7 14.9
Shipping 12.5 27.5
Rackmount configuration 5U
Cooling clearance in. mm
Top 0 0
Bottom 0 0
Left Side 2 51
Right Side 0 0
Front 0 0
Rear 2 51
EMC environmental and safety
Temperature
Operating 0 °C to +50 °C
Nonoperating –20 °C to +60 °C
Humidity
Operating 8% to 90% relative humidity with a maximum wet-bulb temperature of 29 °C at or below +50 °C (upper limit de-rates to 20.6%
relative humidity at +50 °C). Noncondensing
Nonoperating 5% to 98% relative humidity with a maximum wet-bulb temperature of 40 °C at or below +60 °C (upper limit de-rates to 29.8%
relative humidity at +60 °C). Noncondensing
Altitude
Operating 3,000 m (9,843 ft.)
Nonoperating 9,144 m (30,000 ft.)
Regulatory
Electromagnetic compatibility 2004/108/EC
Certifications UL61010-1; CSA61010-1, EN61010-1; IEC 61010-1
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 19
Ordering information
DPO5000B models
DPO5034B 350 MHz, 5 GS/s, 25 M record length, 4-channel digital phosphor oscilloscope
DPO5054B 500 MHz, 5 GS/s, 25 M record length, 4-channel digital phosphor oscilloscope
DPO5104B 1 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4-channel digital phosphor oscilloscope
DPO5204B 2 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4-channel digital phosphor oscilloscope
MSO5000B models
MSO5034B 350 MHz, 5 GS/s, 25 M record length, 4+16 channel mixed signal oscilloscope
MSO5054B 500 MHz, 5 GS/s, 25 M record length, 4+16 channel mixed signal oscilloscope
MSO5104B 1 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4+16 channel mixed signal oscilloscope
MSO5204B 2 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4+16 channel mixed signal oscilloscope
Standard accessories
TPP0500/B One passive voltage probe per analog channel (500 MHz, 10X, 3.9 pF) for 500 MHz and 350 MHz models
TPP1000 One passive voltage probe per analog channel (1 GHz, 10X, 3.9 pF) for 2 GHz and 1 GHz models
200-5130-xx Front cover
119-6107-xx Touch-screen stylus
071-298x-xx User Manual (please specify language when ordering)
—Advanced Search and Mark, DPOJET Essentials, Visual Trigger and Search, Limit Test, and SR-CUST Custom serial analysis
license all included standard
—Accessory pouch
—Mouse
—Calibration Certificate documenting measurement traceability to National Metrology Institute(s), Z 540-1 Compliance and ISO9001
—Power Cord (please specify power plug option when ordering)
—One-year warranty
P6616 16-channel logic probe for MSO Models
020-2662-xx Logic probe accessory kit for MSO Models
Datasheet
20 www.tektronix.com
Options
Record length options Option MSO5034B
DPO5034B
MSO5054B
DPO5054B
MSO5104B
DPO5104B
MSO5204B
DPO5204B
Opt. 5RL 50 M/Ch 125 M max, 50 M/Ch
Opt. 10RL 125 M/Ch 250 M max, 125 M/Ch
Advanced analysis options
Option Description
Opt. BRR BroadR-Reach Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)
Opt. DDRA DDR Memory bus analysis (Requires Opt. DJA) (Available on 1 GHz and 2 GHz models only.)
Opt. DJA Jitter and Eye Analysis Tools – Advanced (DPOJET)
Opt. ET3 Ethernet compliance test (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)
Opt. HSIC USB HSIC protocol decode and electrical validation (Requires Opt. DJA) (Available on 2 GHz models only.)
Opt. MOST MOST Essentials – Electrical compliance and debug test solution for MOST50 and MOST150 (Requires Opt. DJA)
Opt. MTM Mask testing
– ITU-T (64 Kb/s to 155 Mb/s)
– ANSI T1.102 (1.544 Mb/s to 155 Mb/s)
– Ethernet IEEE 802.3, ANSI X3.263 (125 Mb/s to
1.25 Gb/s)
– SONET/SDH (51.84 Mb/s to 622 Mb/s)
– Fibre Channel (133 Mb/s to 2.125 Gb/s)
– Fibre Channel Electrical (133 Mb/s to 1.06 Gb/s)
– USB (12 Mb/s to 480 Mb/s)
– IEEE 1394b (491.5 Mb/s to 1.966 Gb/s)
– Rapid I/O Serial (up to 1.25 Gb/s)
– Rapid I/O LP-LVDS (500 Mb/s to 1 Gb/s)
– OIF Standards (1.244 Gb/s)
– CPRI, V4.0 (1.228 Gb/s)
– Video (143.18 Mb/s to 360 Mb/s)
Opt. PWR Power measurement and analysis
Opt. SR-AERO Aerospace serial triggering and analysis (MIL-STD-1553).
Enables triggering on packet-level information on MIL-STD-1553 buses and analytical tools such as bus views, packet decoding, search tools,
and packet decode tables with time stamp information.
Signal Inputs – Any Ch1 - Ch4
Recommended probing – Differential
Opt. SR-AUTO Automotive serial triggering and analysis (CAN/LIN/FlexRay).
Enables triggering on packet-level information on CAN, LIN, and FlexRay buses and analytical tools such as digital views of the signal, bus views,
packet decoding, search tools, and packet decode tables with time stamp information.
Signal Inputs – Any Ch1 - Ch4 (and any D0 - D15 on MSO models)
Recommended probing – LIN: single-ended; CAN/FlexRay: differential
Opt. SR-COMP Computer serial triggering and analysis (RS-232/422/485/UART)
Enables triggering on packet-level information on RS-232/422/485/UART buses and analytical tools such as digital views of the signal, bus views,
packet decoding, search tools, and packet decode tables with time stamp information.
Signal Inputs – Any Ch1 - Ch4 (and any D0 - D15 on MSO models)
Recommended probing – RS-232/UART: single ended; RS-422/485: differential
Opt. SR-DPHY MIPI® D-PHY serial analysis.
Enables analysis of MIPI DSI-1 and CSI-2 buses with analytical tools such as digital views of the signal, bus views, packet decoding, search
tools, and packet decode tables with time stamp information.
Signal Inputs – Any Ch1 - Ch4
Recommended probing – Differential
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 21
Option Description
Opt. SR-EMBD Embedded serial triggering and analysis (I2C, SPI)
Enables triggering on packet-level information on I2C and 2-wire and 3-wire SPI buses and analytical tools such as digital views of the signal, bus
views, packet decoding, search tools, and packet decode tables with time stamp information.
Signal Inputs – I2C: Any Ch1 - Ch4 (and any D0 - D15 on MSO models); SPI: Any Ch1 - Ch4 (and any D0 - D15 on MSO models)
Recommended probing – I2C, SPI: single ended
Opt. SR-ENET Ethernet serial triggering and analysis (10BASE-T, 100BASE-TX)
Enables triggering on packet-level information on Ethernet buses as well as analytical tools such as bus views, packet decoding, search tools,
and packet decode tables with time stamp information.
Signal Inputs – Any Ch1 - Ch4.
Recommended probing – Differential
Opt. SR-USB USB 2.0 serial triggering and analysis (LS, FS, HS)
Enables triggering on packet-level content for low-speed, full-speed, and high-speed USB serial buses. Also enables analytical tools such as bus
views, packet decoding, search tools, and packet decode tables with time stamp information for low-speed, full-speed, and high-speed USB serial
buses.
Signal Inputs – Low-speed and Full-speed: Any Ch1 - Ch4 (and any D0 - D15 on MSO models) for single ended, Any Ch1 - Ch4 for differential;
High-speed: Any Ch1 - Ch4
Recommended probing – Low-speed and Full-speed: Single ended or differential; High-speed: Differential (USB high-speed supported only on
MSO5204, DPO5204, MSO5104, and DPO5104 models.)
Opt. SVE SignalVu® Essentials – Vector signal analysis software
Opt. USB USB 2.0 Compliance testing (Requires TDSUSBF USB Test Fixture. 2 GHz bandwidth required for high-speed USB)
Opt. USBPWR Automated compliance test solution for USB power adapters
Opt. VNM CAN/LIN Protocol analysis software
Bundle options
These bundled items must be purchased at the same time as the instrument purchase.
Option Description
Opt. PS2 Power Solution Bundle: DPOPWR, THDP0200, TCP0030A, 067-1686-xx (Deskew fixture)
Opt. PS3 Power Solution Bundle: DPOPWR, TMDP0200, TCP0020, 067-1686-xx (Deskew fixture)
Floating options
Floating licenses offer an alternative method to manage your Tektronix asset. Floating licenses allow license-key enabled options to be easily moved among all your MSO/
DPO5000, DPO7000, and DPO/DSA/MSO70000 Series Tektronix oscilloscopes. Floating licenses are available for the following license-key enabled options.
Check http://www.tek.com/products/oscilloscopes/floatinglicenses for additional information about floating license options.
Option Description
DPOFL-BRR BroadR-Reach Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)
DPOFL-DDRA DDR Memory bus analysis (Requires Opt. DJA) (Available on 1 GHz and 2 GHz models only)
DPOFL-DJA Jitter and Eye Analysis Tools – Advanced (DPOJET)
DPOFL-ET3 Ethernet compliance testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet test fixture.)
DPOFL-HSIC USB HSIC protocol decode and electrical validation (Requires Opt. DJA) (Available on 2 GHz models only)
DPOFL-MOST MOST Essentials – Electrical compliance and debug test solution (MOST50, MOST150) (Requires Opt. DJA)
DPOFL-MTM Mask testing
DPOFL-PWR Power measurement and analysis
DPOFL-SR-AERO Aerospace serial triggering and analysis (MIL-STD-1553)
DPOFL-SR-AUTO Automotive serial triggering and analysis (CAN/LIN/FlexRay)
DPOFL-SR-COMP Computer serial triggering and analysis (RS-232/422/485/UART)
DPOFL-SR-DPHY MIPI® D-PHY serial analysis
Datasheet
22 www.tektronix.com
Option Description
DPOFL-SR-EMBD Embedded serial triggering and analysis (I2C, SPI)
DPOFL-SR-ENET Ethernet serial triggering and analysis (10BASE-T and 100BASE-TX)
DPOFL-SR-PCIE PCI Express serial analysis (Available on ≥1 GHz models only) (Due to large volumes of data, use of standard high-capacity hard
drive rather than smaller SSD is recommended)
DPOFL-SR-USB USB 2.0 serial triggering and analysis (LS, FS, HS)
DPOFL-SR-810B 8b/10b serial analysis
DPOFL-SVA SignalVu® AM/FM/PM/Direct Audio measurements (Requires Opt. SVE)
DPOFL-SVE SignalVu® Essentials – Vector signal analysis software
DPOFL-SVM SignalVu® General purpose modulation analysis (Requires Opt. SVE)
DPOFL-SVP SignalVu® Pulse – Advanced signal analysis (Requires Opt. SVE)
DPOFL-SVT SignalVu® Settling time measurements (Requires Opt. SVE)
DPOFL-USB USB 2.0 Compliance testing (Requires TDSUSBF USB Test Fixture. 2 GHz bandwidth required for high-speed USB)
DPOFL-USBPWR Automated compliance test solution for USB power adapters
DPOFL-VNM CAN/LIN Protocol analysis software
Power plug options
Opt. A0 North America power plug (115 V, 60 Hz)
Opt. A1 Universal Euro power plug (220 V, 50 Hz)
Opt. A2 United Kingdom power plug (240 V, 50 Hz)
Opt. A3 Australia power plug (240 V, 50 Hz)
Opt. A5 Switzerland power plug (220 V, 50 Hz)
Opt. A6 Japan power plug (100 V, 110/120 V, 60 Hz)
Opt. A10 China power plug (50 Hz)
Opt. A11 India power plug (50 Hz)
Opt. A12 Brazil power plug (60 Hz)
Opt. A99 No power cord
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 23
User manual options
Opt. L0 English manual
Opt. L1 French manual
Opt. L3 German manual
Opt. L5 Japanese manual
Opt. L7 Simplified Chinese manual
Opt. L8 Traditional Chinese manual
Opt. L9 Korean manual
Opt. L10 Russian manual
Opt. L99 No manual
Service options
Opt. C3 Calibration Service 3 Years
Opt. C5 Calibration Service 5 Years
Opt. D1 Calibration Data Report
Opt. D3 Calibration Data Report 3 Years (with Opt. C3)
Opt. D5 Calibration Data Report 5 Years (with Opt. C5)
Opt. G3 Complete Care 3 Years (includes loaner, scheduled calibration, and more)
Opt. G5 Complete Care 5 Years (includes loaner, scheduled calibration, and more)
Opt. R3 Repair Service 3 Years (including warranty)
Opt. R5 Repair Service 5 Years (including warranty)
Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty
and calibration terms.
Upgrade options
To upgrade your MSO/DPO5000B Series oscilloscope, order DPO-UP and an option listed below. For example, DPO-UP DDRA.
To upgrade record length:
RL25E From standard 25 M/channel configuration to Opt. 5RL configuration
RL210E From standard 25 M/channel configuration to Opt. 10RL configuration
RL510E From Opt. 5RL configuration to Opt. 10RL configuration
To add a solid state hard disk
drive:
SSDE Add an additional removable solid state drive (customer installable)
To upgrade MSO/DPO5000B Series
with:
BRR Add Opt. BRR - BroadR-Reach Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)
DDRA Add Opt. DDRA (Requires Opt. DJA.) (Available on 1 GHz and 2 GHz models only)
DJAE Add Opt. DJA – Jitter and Eye Analysis Tools - Advanced (DPOJET)
ET3 Add Opt. ET3 – Ethernet Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)
HSIC Add Opt. HSIC - USB HSIC protocol decode and electrical validation (Available on 2 GHz models only) (Requires Opt. DJA)
Datasheet
24 www.tektronix.com
MOST Add Opt. MOST – MOST Essentials - Electrical Compliance and Debug Test Solution (MOST50, MOST150) (Requires Opt. DJA)
MTM Add Opt. MTM – Mask Testing
PWR Add Opt. PWR – Power Measurement and Analysis
SR-AERO Add Opt. SR-AERO – Aerospace Serial Triggering and Analysis (MIL-STD-1553)
SR-AUTO Add Opt. SR-AUTO – Automotive Serial Triggering and Analysis (CAN/LIN/FlexRay)
SR-COMP Add Opt. SR-COMP – Computer Serial Triggering and Analysis (RS-232/422/485/UART)
SR-DPHY Add Opt. SR-DPHY – MIPI D-PHY Serial Analysis (DSI-1, CSI-2)
SR-EMBD Add Opt. SR-EMBD – Embedded Serial Triggering and Analysis (I2C, SPI)
SR-ENET Add Opt. SR-ENET – Ethernet Serial Triggering and Analysis (10BASE-T and 100BASE-TX)
SR-PCIE Add PCI Express Serial Analysis (Available on ≥1 GHz models only.)
SR-USB Add Opt. SR-USB – USB 2.0 Serial Triggering and Analysis (LS, FS, HS)
SR-810B Add 8b/10b Serial Analysis
SVA Add SignalVu AM/FM/Direct Audio Measurements (Requires Opt. SVE)
SVEE Add Opt. SVE – SignalVu Essentials - Vector Signal Analysis Software
SVM Add SignalVu General-purpose Modulation Analysis (Requires Opt. SVE)
SVP Add SignalVu Pulse - Advanced Signal Analysis (Requires Opt. SVE)
SVT Add SignalVu Settling Time Measurements - Frequency and Phase (Requires Opt. SVE)
USB Add Opt. USB – USB 2.0 Compliance Testing (Requires TDSUSBF USB Test Fixture) (2 GHz bandwidth required for high-speed
USB)
USBPWR Add Opt. USBPWR - Automated compliance test solution for USB power adapters
VNM Add Opt. VNM – CAN/LIN Serial Protocol Decode
To upgrade DPO5000B Series to
MSO:
MSOE Add 16 digital channels to a DPO5000B
Recommended accessories
Accessories
077-0076-xx Service manual (PDF only)
077-0010-xx Programmer manual (PDF only)
077-0063-xx Performance verification and specifications manual (PDF only)
TPA-BNC TekVPI-to-TekProbe BNC adapter
TEK-DPG Deskew Pulse Generator
TEK-USB-488 GPIB-to-USB adapter
HCTEK54 Hard transit case
RMD5000 Rackmount kit
119-7083-xx Mini keyboard (USB interface)
119-7275-xx Mini multimedia keyboard
119-7465-00 TekVPI external power supply – Required when probe power usage exceeds 15 W. Power cord not included. Specify power cord
when ordering.
119-7766-xx External DVD R/W drive
065-0952-xx Spare removable Solid State Drive
K420 Oscilloscope cart
NEX-HD2HEADER Mictor connector to square pin adapter
Cables
012-0991-xx GPIB Cable (1 m)
012-0991-xx GPIB Cable (2 m)
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 25
Test fixtures
067-1686-xx Probe Calibration / Power Deskew test fixture
TDSUSBF Test fixture for use with Opt. USB
TF-GBE-BTP Basic test package for 10/100/1000BASE-T Ethernet tests
TF-GBE-ATP Advanced test package for 10/100/1000BASE-T Ethernet (includes 1000BASE-T jitter test channel cable)
TF-GBE-EE Additional test fixture for Energy Efficient Ethernet measurements. Order through Crescent Heart Software (http://www.c-h-s.com)
Adapters
P6701B Optical/Electrical converter (multi mode). Requires TekVPI® to TekProbe BNC adapter (TPA-BNC).
P6703B Optical/Electrical converter (single mode). Requires TekVPI® to TekProbe BNC adapter (TPA-BNC).
Probes Tektronix offers over 100 different probes to meet your application needs. For a comprehensive listing of available probes, please
visit www.tektronix.com/probes.
TPP0500 500 MHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance
TPP1000 1 GHz, 10X TekVPI passive voltage probe with 3.9 pF input capacitance
TPP0502 500 MHz, 2X TekVPI passive voltage probe
TAP2500 2.5 GHz TekVPI active single-ended voltage probe
TAP1500 1.5 GHz TekVPI active single-ended voltage probe
TDP3500 3.5 GHz TekVPI differential voltage probe with ±2 V differential input voltage
TDP1500 1.5 GHz TekVPI differential voltage probe with ±8.5 V differential input voltage
TDP1000 1 GHz TekVPI differential voltage probe with ±42 V differential input voltage
TDP0500 500 MHz TekVPI differential voltage probe with ±42 V differential input voltage
TCP0150 20 MHz TekVPI 150 Ampere AC/DC current probe
TCP0030A 120 MHz TekVPI 30 Ampere AC/DC current probe
TCP0020 50 MHz TekVPI 20 Ampere AC/DC current probe
TPP0850 2.5 kV, 800 MHz TekVPI high-voltage passive probe
TMDP0200 ±750 V, 200 MHz high-voltage differential probe
THDP0200 ±1.5 kV, 200 MHz high-voltage differential probe
THDP0100 ±6 kV, 100 MHz high-voltage differential probe
P5100A 2.5 kV, 500 MHz, 100X high-voltage passive probe
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
Datasheet
26 www.tektronix.com
Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series
www.tektronix.com 27
Datasheet
ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200
Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401
Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835*
Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835*
Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098
People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370
Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777
Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835*
Taiwan 886 (2) 2722 9622 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200
* European toll-free number. If not accessible, call: +41 52 675 3777 Updated 10 April 2013
For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com.
Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and
price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
04 Nov 2013 48W-29560-0
www.tektronix.com
