414 Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
P&B
Catalog 1308242
Issued 3-03 (PDF Revised 8-06)
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
File E29244
File No. 3919
Sensitive, Low Profile, Hi-Current
Relay Designed to Meet
International Standards
Mechanical Data
Termination: Printed circuit terminals.
Enclosures: Wash tight (washable) case.
Weight: 0.39 oz. (11.0g) approximately.
Initial Dielectric Strength
Between Open Contacts: 1,000V rms.
Between Contacts and Coil: 4,000V rms, 8mm.
T75series
10 Amp, PC Board
Miniature Relay
Coil Data
Voltage: 3 to 60VDC.
Maximum Power @ 23°C: 1W.
Nominal Power @ 23°C: 230mW, typ.
Temperature Rise: 85C° per Watt.
Duty Cycle: Continuous.
Operate Data @ 23°C
Must Operate Voltage: 70% of nom. voltage or less.
Must Release Voltage: 10% of nom. voltage or more.
Operate Time (Excluding Bounce): 6 ms, typ., at nom. voltage.
Release Time (Excluding Bounce): 2.5 ms, typ., at nom. voltage.
Maximum Switching Rate: 20 operations/second.
Maximum Continuous Operating Voltage: 225% of nom. voltage.
Coil Data
Features
• High sensitivity – nominal coil power requirement is as low as 212mW.
• Low profile, .591 in. (15mm) tall case uses only .465 in2 (3cm2) of area on the
printed circuit board, permitting high density circuit design.
• Power switching capability – contacts rated 10 amps in 1 Form A (SPST-NO) or 1
Form C (SPDT) arrangements.
• Designed to meet UL, CSA, VDE, SEMKO and SEV requirements.
• Designed to meet VDE 8mm spacing, 4kV dielectric, coil to contacts.
• Designed to meet 3 mm creepage between contacts.
• Conforms to: VDE 0110 – Insulation Group C (250V)
VDE 435 Part 201 – High current applications
VDE 0804 – Telecommunications equipment
VDE 0631 – Temperature controllers and limiters
VDE 0700 – Household appliances
VDE 0805/5.90 – Office machines
• Wash tight (washable).
• Well suited for a broad range of applications e.g. HVAC, appliances,
security and industrial control.
Contact Ratings @ 25°C with relay properly vented.
Remove vent nib after soldering and cleaning.
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver-cadmium oxide.
Expected Mechanical Life: 10 million operations.
Expected Electrical Life:
100,000 operations at 8 amps, 240VAC.
50,000 operations at 14 amps NO / 5 amps NC, 120VAC Res.
30,000 operations at 7.2 FLA, 45 LRA, 120VAC.
10,000 operations at 5 FLA, 30 LRA, 240VAC.
30,000 operations at B300 pilot duty (360VA, 240VAC; 470VA, 120VAC).
Contact Ratings (See Figure 1):
Maximum Switched Voltage: 380VAC.
Maximum Switched Current: 14/5 (N.O./N.C.) amps, AC resistive;
8 amps DC (see Fig. 1)
Maximum Switched Power: 200W, DC; 2,000VA, AC.
Minimum Required Contact Load: 12V, 100mA.
VDE Contact Ratings: 8 amps, 250VAC.
UL Contact Ratings: 10 amps, 240VAC; 8 amps 24VDC;
1/3 HP, 120VAC; 1/2 HP, 240VAC.
.1 1 10 100
10
100
200 W
100 W
Switching V oltage (VDC)
200
300
50
40
30
20
25 W
Switching Current (Amps DC)
50 W
ENVIRONMENTAL DATA
Temperature Range
Storage: -40°C to +130°C.
Operating: -40°C to +85°C.
DC Must Nominal
Nominal Resistance Operate Coil
Voltage in Ohms Voltage Current
±10% (mA)
3 40 2.1 75.0
5 118 3.4 42.4
6 165 4.1 36.4
DC 9 365 6.1 24.7
Coils 12 650 8.2 18.5
18 1,455 12.3 12.4
24 2,270 16.3 10.6
36 5,460 24.5 6.4
48 8,790 32.6 5.5
60 15,265 40.8 3.9
Figure 1 - DC Switching Load Limit Curve
Users should thoroughly review the technical data before selecting a product part number. It
is recommended that user also seek out the pertinent approvals files of the agencies/
laboratories and review them to ensure the product meets the requirements for a given
application.
415
Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change. www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03 (PDF Revised 8-06)
*ON SINGLE THROW MODELS,
ONLY NECESSARY TERMINALS
ARE PRESENT.
PC Board Layouts (Bottom Views)
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
T75S5D112-05
T75S5D112-12
T75S5D112-24
Outline Dimensions Wiring Diagram (Bottom View)
*
FORM A
1.126 MAX.
(28.6)
FORM C
1.181 MAX.
(30)
.394
(10)
.591
(15) .150
(3.8)
CONTACT TERMINALS: .023 x .040 (.58 x 1.02) REF.
COIL TERMINALS: .024 (.61) DIA. REF.
1 Form C 1 Form A
.126
(3.2)
.126
(3.2)
.748
(19)
.110
(2.8)
.300
(7.6)
.051 DIA. TYP.
(1.3)
.197
(5)
.748
(19)
.110
(2.8)
.300
(7.6)
.051 DIA. TYP.
(1.3)
Ordering Information
Typical Part Number B T75 S 5 D 1 1 2 -12
1. Basic Series:
T75 = Low profile, printed circuit board relay.
2. Enclosure:
S = Wash tight (washable).
3. Contact Arrangement:
1 = 1 Form A (SPST-NO)
5 = 1 Form C (SPDT)
4. Coil Input:
D = DC voltage
5. Coil Configuration:
1 = Single coil, non-latching (monostable)
6. Mounting and Terminals:
1 = Printed circuit terminals
7. Contact Material:
2 = Silver-cadmium oxide (AgCdO)
8. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC
05 = 5VDC 09 = 9VDC 18 = 18VDC 36 = 36VDC 60 = 60VDC
NOTE: All part numbers are RoHS compliant.
