MCCSEMI.COM
Rev.3-2-08012019
1/3
SDB101 THRU SDB107
1.0 Amp
Single Phase
Bridge Rectifier
50 to 1000 Volts
Device
Marking
Maximum
Recurrent
Peak Reverse
Voltage
Maximum
RMS
Voltage
Maximum DC
Blocking
Voltage
SDB101 SDB101 50V 35V 50V
SDB102 SDB102 100V 70V 100V
SDB103 SDB103 200V 140V 200V
SDB104 SDB104 400V 280V 400V
SDB105 SDB105 600V 420V 600V
SDB106 SDB106 800V 560V 800V
SDB107 SDB107 1000V 700V 1000V
Electrical Characteristics @ 25°C Unless Otherwise Specied
Average
Forward Current IF(AV) 1.0A TA= 40°C
Maximum
Instantaneous
Forward Voltage
VF
Maximum DC
Reverse Current at
Rated DC Blocking
Voltage
IR
10μA TJ = 25°C
Note: 1. High Temperature Solder Exemption Applied, See EU Directive Annex Notes 7a.
MCC
Part Number
Typical Junction
Capacitance CJ25pF Measured at
1.0MHz, VR=4.0V
Peak Forward
Surge Current IFSM 30A8.3ms, Half Sine
1.1VIFM = 1.0A
TJ = 25°C
0.5mATJ = 125°C
2. Units Mounted on P.C.B with 0.51x0.51"(13x13mm) Copper Pads
Features
•Halogen Free Available Upon Request By Adding Suffix "-HF"
•Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix
Designates Compliant. See Ordering Information)
•Epoxy Meets UL 94 V-0 Flammability Rating
•Moisture Sensitivity Level 1
•Surface Mount Package
•Low Profile Package
Maximum Ratings
•Operating Junction Temperature Range: -55°C to +150°C
•Storage Temperature Range: -55°C to +150°C
•Typical Thermal Resistance(Note2): 15°C/W Junction to Lead
•Typical Thermal Resistance(Note2): 40°C/W Junction to Ambient
E502650
SDB-1
BC
D
A
E
G
H
K
Notch in Case
+
∼
1.19mm
1.52mm
5.21mm
8.74mm
MIN MAX MIN MAX
A 0.316 0.335 8.05 8.51
B 0.245 0.255 6.20 6.50
C 0.040 0.060 1.02 1.50
D 0.360 0.410 9.40 10.40
E 0.102 0.130 2.60 3.30
G 0.003 0.013 0.076 0.33
H 0.195 0.205 5.00 5.20
K 0.038 0.047 1.00 1.20
DIMENSIONS
DIM INCHES MM NOTE
Suggested Solder Pad Layout
∼
-
Current Squared Time I2t3.7A2S1ms≤t≤8.3ms
MCCSEMI.COM
Rev.3-2-08012019
2/3
SDB101 THRU SDB107
Curve CharacteristicsCurve Characteristics
0 25 125 150
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Average Forward Current (A)
Resistive or Inductive Load
Fig. 1 - Forward Current Derating Curve
50 75 100
Ambient Temperature (°C)
1 100
0
5
10
15
20
25
30
35
Peak Forward Surge Current (A)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge
Current
20 120
0.01
0.1
1
10
100
TJ=125°C
TJ=75°C
Instantaneous Reverse Leakage Current (μA)
10
Number of Cycles at 60 Hz
Fig. 4 - Typical Reverse Leakage Characteristics
TJ=25°C
40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
0.01
0.1
1
10
0.6 0.8 1.0 1.2 1.4
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
TJ=25°C
Fig. 3 - Typical Instantaneous Forward Characteristics
8.3 ms Single Half Sine-Wave
MCCSEMI.COM
Rev.3-2-08012019
3/3
Ordering Information
SDB101 THRU SDB107
Device Packing
Part Number-TPTape&Reel:1.5Kpcs/Reel
Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express
written approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Part Number-BPBulk:20Kpcs/Ctn
