1.27 mm pitch connectors Horizontal type die-cast material backshell for larger diameter cables with provision for preventing misinsertion PCS-E( )WKP( )-( ) For Backshell Horizontal EMI-filtered Configuration of product Part No. PCS-E ( ) WKP ( )- ( ) Series name No. of contacts: 36, 50, 68, 80 Type of backshell WKP: Horizontal type backshell for larger diameter cables with mating guide for preventing misinsertion Identification mark (A or B) of cable-end-outlet dimension. Cable diameters for reference purposes are shown in the Dimension table as shown below. Key-riveted position (Refer to the Dimension table as shown below) for preventing misinsertion. 35.5 1 2 3 4 37.0 B 11.6 5 10.0 A 1.5 5 4 3 2 1 B A Key-riveted position No. C C D D E E B Components Cable clamp Small-sized Phillips head screw Dimensions Latch Cover B A B Part No. PCS-E36WKPA-( ) 40.2 10.59.5 PCS-E50WKPB-( ) 48.9 1210 Cover A Small-sized Phillips flat head screw PCS-E68WKPA-( ) 60.3 1110 PCS-E80WKPA-( ) 67.9 10.59.5 Key rivet For use with connector: PCS-E series of IDC type female connectors for cables PCS-E series of Soldering type female connectors for cables PCS-XE series of IDC type male connectors for cables Accessories: Key-rivets for preventing misinsertion, PCS-E-PK DIP SMT Press-in IDC Wire Soldering Crimping wrapping Others Outside diameter of cable for reference purposes o9.5 Key-riveted position No. 1D, 2C, 3B, 4A o11.5 o10.5 o9.5 1E, 2D, 4B, 5A