
Classification: "Lithium Coin"
Lithium / Manganese Dioxide (Li/MnO2)
Nominal Voltage: 3.0 Volts
Typical Capacity: 60 mAh (to 2.0 volts)
(Rated at 30K ohms at 21°C)
Typical Weight: 1.1 grams (0.04 oz.)
Typical Volume: 0.32 cubic centimeters (0.02 cubic inch)
Max Rev Charge: 1 microampere
Energy Density: 133 milliwatt hr/g, 498 milliwatt hr/cc
Typical Li Content: 0.014 grams (0.0005 oz.)
Operating Temp: -30C to 70C
Self Discharge: ~1% / year
30,000 648 Bkgnd Drain: Continuous
Pulse Drain: 2 seconds X 12 times/day
Simulated Application test
Typical Performance at 21°C (70°F)
Industry Standard Dimensions
(1) KEEP OUT OF REACH OF CHILDREN. Swallowing may lead to
serious injury or death in as little as 2 hours due to chemical burns and
potential perforation of the esophagus. Immediately see doctor; have
doctor phone (800) 498-8666.
(2) Battery compartment design. To prevent children from removing
batteries, battery compartments should be designed with one of the
following methods: a) a tool such as screwdriver or coin is required to open
battery compartment or b) the battery compartment door/cover requires
the application of a minimum of two independent and simultaneous
movements of the securing mechanism to open by hand. Screws should
remain captive with the battery door or cover.
Contents herein do not constitute a warranty and are for reference only.
Pulse Test at 21°C (70°F)
Typical Discharge Characteristics
Internal Resistance Characteristics
This datasheet contains typical information specific to products manufactured at the time of its publication.
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
0 100 200 300 400 500 600 700
Voltage, CCV
Service, Hours
Load: 30K ohms - Continuous
Typical Drain @ 2.9V: 0.1 mA
0
20
40
60
80
100
120
140
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
0 5 10 15 20 25 30 35 40 45 50 55 60
IR, ohms
Voltage, CCV
Capacity, mAh
16.00 (0.630)
15.70 (0.618)
1.10 (0.043) Ref.
1.40 (0.055) Ref. 5.00 (0.197)
Minimum
0.20 (0.008) Maximum Ref.
Permissible deflection from a flat.
0.03 Minimum Ref.
(Applies to top edge of gasket or
edge of crimp, whichever is higher.)
1.60 (0.063)
1.40 (0.055)
Form No. 1616GL0618 Page 1 of 1