IR43x2 Features Product Summary 2 channel integrated analog input Class D audio amplifier in a small 7 x 7 mm PQFN44 package No mechanical heatsink required High peak music power output Split or single power supply Differential or single-ended input Over-current, over-temperature and under voltage protections with self-reset feature Start/stop click noise reduction Clip and Fault reporting outputs High noise immunity RoHS compliant Typical Applications Home theatre systems Docking station audio systems PC audio systems Musical instruments Karaoke amplifiers Game consoles Powered speaker systems General purpose audio power amplifiers Half-Bridge, Full-Bridge Topology IR4302 Output power (Typical, THD+N=10%) 130 W/ 4 IR4322 Output power (Typical, THD+N=10%) 100 W/ 4 IR4312 Output power (Typical, THD+N=10%) 35 W/ 4 100 W/ 3 100 W/ 2 40 W/ 3 *Residual noise (AES-17, IHF-A, typical) 250 Vrms *THD+N (1kHz, 1W, 4 , typical) 0.02 % * In typical application example Package 7x7mm PQFN44L Typical Connection 1 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Table of Contents Page Typical Connection Diagram 1 Qualification Information 4 Absolute Maximum Ratings 5 Recommended Operating Conditions 7 Electrical Characteristics 8 Functional Block Diagram 11 Input/Output Pin Equivalent Circuit Diagram 12 Lead Definitions 14 Lead Assignments 15 Package Details 16 Part Marking Information 17 Ordering Information 17 2 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Description The IR43x2 integrates 2 channel PWM controller and digital audio MOSFETs forming a high performance Class D audio amplifier. As a result of fully optimized MOSFETs co-packed with a dedicated controller IC, the IR43X2 operates without mechanical heatsink attached in a typical music playback usage. High voltage ratings and noise immunity in the controller IC ensures reliable operation over various environmental conditions. A small 7x7 mm PQFN package enhances the benefit of smaller size of Class D topology. The IR43X2 series is a lead-free, ROHS compliant. Typical Connection Diagram 1. Inverting Amplifier 2. Differential Amplifier 3 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 3. Single Power Supply (Inverting Amplifier) Qualification Information Qualification Level Moisture Sensitivity Level Machine Model ESD Human Body Model IC Latch-Up Test RoHS Compliant Industrial Comments: This family of ICs has passed JEDEC's Industrial qualification. IR's Consumer qualification level is granted by extension of the higher Industrial level. MSL2 (per IPC/JEDEC J-STD-020C) Class A (per JEDEC standard EIA/JESD22-A115) IR4302M Class 1B IR4322M (per EIA/JEDEC standard JESD22-A114) Class 1A IR4312M (per EIA/JEDEC standard JESD22-A114) Class I, Level A (per JESD78) Yes Qualification standards can be found at International Rectifier's web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. 4 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM=VN1=VN2; all currents are defined positive into any lead. The Thermal Resistance and Power Dissipation ratings are measured under board mounted and still air conditions. Symbol Definition VPn Positive power supply rail voltage, n=1-2 VBn High side floating supply voltage VSn VCSHn VCC High side floating supply voltage , n=1-2 CSH pin input voltage, n=1-2 Low side supply voltage VAA Floating input positive supply voltage VSS Floating input negative supply voltage VIN+n IINn VCSD VCOMPn VCLIP ICLIP VFAULT IFAULT IAAZ ISSZ ICCZ IBSZn dVSn/dt dVSS/dt Input current between IN- and IN+ pins , n=1-2 CSD pin input voltage COMP pin input voltage, n=1-2 CLIP pin input voltage CLIP pin sinking current FAULT pin input voltage FAULT pin sinking current Floating input supply zener clamp current Floating input negative supply zener clamp current Low side supply zener clamp current Floating supply zener clamp current , n=1-2 Allowable Vs voltage slew rate, n=1-2 Allowable Vss voltage slew rate IR4302 IR4322 IR4312 Floating input supply ground voltage , n=1-2 Continuous output current, from VPn to VSn, VSn to VNn, VCC=10V, VBn-VSn=10V Id@ 100C Continuous output current, from VPn to VSn, VSn to VNn, VCC=10V, VBn-VSn=10V IDM Pulsed output current, from VPn to VSn, VSn to VNn, VCC=10V, VBn-VSn=10V www.irf.com (c) 2013 International Rectifier Min -0.3 -0.3 -0.3 VBn -15 VSn -0.3 -0.3 -0.3 -0.3 -0.3 -1 (See ISSZ) VSS -0.3 VSS -0.3 VSS -0.3 GND -0.3 GND -0.3 - Id@ 25C 5 IR4302 IR4322 IR4312 IR4302 IR4322 IR4312 IR4302 IR4322 IR4312 IR4302 IR4322 IR4312 IR4302 IR4322 IR4312 - - - Max 80 60 40 95 75 55 VBn +0.3 VBn +0.3 15 100 70 50 Units V GND +0.3 VAA +0.3 3 VAA +0.3 VAA +0.3 VAA +0.3 5 VAA +0.3 5 20 20 20 20 50 50 6.5 7.0 3.6 5.4 5.8 2.9 26 28 15 mA V mA V mA V/ns V/ms A Apr 3, 2013 IR43x2 Pd Power dissipation RthJC Thermal resistance, junction to ambient TJIC TJFET TS TL Control IC junction temperature FET junction temperature Storage Temperature Lead temperature (Soldering, 10 seconds) 6 @ TC = 25C IR4302 IR4322 IR4312 IR4302 IR4322 IR4312 -55 - 25 25 8 5 5 14 150 150 150 300 W C/W C IN- and IN+ contain clamping diodes between the two pins. VAA -VSS, Vcc-COM and VBn-VSn contain internal shunt zener diodes. Note that the voltage ratings of these can be limited by the clamping current. For the rising and falling edges of step signal of 10V. Vss=15V to 200V. Per MOSFET Repetitive rating, pulse width limited by max. junction temperature www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Recommended Operating Conditions For proper operation, the device should be used within the recommended conditions below. The Vss and Vsn offset ratings are tested with supplies biased at COM=VN1=VN2, VAA-VSS=9.6V, VCC=12V and VBn-VSn=12V. All voltage parameters are absolute voltages referenced to COM; all currents are defined positive into any lead. Symbol Definition Min Max Units Positive power supply voltage, n=1-2, without heatsink VPn Positive power supply voltage, n=1-2, with heatsink VBn IR4302 - 46 IR4322 - 46 IR4312 - 32 IR4302 - 62 IR4322 - 50 IR4312 - 32 VSn +10 VSn +14 IR4302 80 IR4322 60 IR4312 40 VSS + 4.5 VSS + 15 IR4302 0 80 IR4322 0 60 IR4312 0 40 1 15 1 15 10 15 High side floating supply absolute voltage, n=1-2 VSn High side floating supply offset voltage, n=1-2 VAA Floating input positive supply voltage VSS Floating input negative supply voltage IAAZ Floating input supply zener clamp current V mA ISSZ Floating input negative supply zener clamp current VCC Low side fixed supply voltage VIC IN- and IN+ pins common mode input voltage VSS + 2 VAA - 2 VIN-n Inverting input voltage, n=1-2 VIN+ -0.5 VIN+ +0.5 VCSD CSD pin input voltage VSS VAA VCOMPn COMP pin input voltage, n=1-2 VSS VAA CCOMPn COMP pin phase compensation capacitor to GND , n=1-2 1 - nF VCSHn CSH pin input voltage, n=1-2 VSn VBn V dVss/dt Allowable Vss voltage slew rate upon power-up - 50 V/ms fSW Switching Frequency - 500 kHz TA Ambient Temperature -40 100 C V Logic operational for Vs equal to -5V to +80V. Logic state held for Vs equal to -5V to -VBS. GND input voltage is limited by IAAZ and ISSZ. Vss ramps up from 0V to 70V. 7 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Electrical Characteristics VCC,VBS= 12 V, VSS=VS1=VS2=VN1=VN2=COM=0V, VAA=9.6V and TA=25C unless otherwise specified. Symbol Definition Low Side Supply Vcc supply UVLO positive UVCC+ threshold Vcc supply UVLO negative UVCCthreshold UVCCHYS UVCC hysteresis IQCC Low side quiescent current ICC Low side supply current Low side zener diode clamp VCLAMPLn voltage, n=1-2 High Side Floating Supply High side well UVLO UVBS+n positive threshold, n=1-2 High side well UVLO UVBS-n negative threshold, n=1-2 UVBSHYSn UVBS hysteresis, n=1-2 High side quiescent current, IQBSn n=1-2 High side zener diode clamp VCLAMPHn voltage, n=1-2 Floating Input Supply VA+, VA- floating supply UVAA+ UVLO positive threshold from VSS VA+, VA- floating supply UVAAUVLO negative threshold from VSS Min Typ Max Units Test Conditions 8.4 8.9 9.4 V 8.2 8.7 9.2 V - 0.2 10 3 - V mA mA f=400kHz 14.7 15.3 16.2 V ICC=5mA 8.0 8.5 9.0 V 7.8 8.3 8.8 V - 0.2 - V - - 2.4 mA 14.7 15.3 16.2 V IBS=5mA 8.2 8.7 9.2 V VSS =0V, GND pin floating 7.7 8.2 8.7 V VSS =0V, GND pin floating UVAAHYS UVAA hysteresis - 0.5 - V IQAA0 Floating Input positive quiescent supply current - 1.5 3 mA IQAA1 Floating Input positive quiescent supply current - 4 6 mA IQAA2 Floating Input positive quiescent supply current - 5 7.5 mA - - 50 A 4.9 5.1 5.4 V ILKM VCLAMPM+ VCLAMPM- 8 Floating input side to Low side leakage current VAA floating supply zener diode clamp voltage, positive, with respect to GND VSS floating supply zener diode clamp voltage, negative, with respect to GND www.irf.com -5.4 (c) 2013 International Rectifier -5.1 -4.9 V VSS =0V, GND pin floating VAA=9.6V, VSS =0V, VCSD =VSS VAA=9.6V, VSS =0V, VCSD =VAA VAA=9.6V, VSS =0V, VCSD =GND VAA=VSS=VGND= 100V IAA=5mA, ISS=5mA, VGND=0V, VCSD =VSS IAA=5mA, ISS=5mA, VGND=0V, VCSD =VSS Apr 3, 2013 IR43x2 Electrical Characteristics (cont'd) VCC,VBS= 12 V, VSS=VS1=VS2=VN1=VN2=COM=0V, VAA=9.6V and TA=25C unless otherwise specified. Symbol Definition Min Audio Input (VGND=0, VAA=4.8V, VSS=-4.8V) VOSn Input offset voltage, n=1-2 -18 IBINn Input bias current, n=1-2 Small signal bandwidth in GBWn OTA, n=1-2 gmn OTA transconductance, n=1-2 GVn PWM OTA gain, n=1-2 mV nA 9 - MHz - 10 - mS 50 - - dB (VAA VSS)/2 - V 1.0 1.5 MHz 370 - ns 320 - ns 50 - ns - - V 39 50 m 7.3 - 20 50 nC A A - - V 30 40 m 8.3 - 20 50 nC A A - - V 44 4.5 56 - m nC - Qg Total gate charge ILK0 VP leakage current, VS=VN ILK1 VP leakage current, VS=VP Power MOSFET (FET1, FET2, FET3, FET4) (IR4322) Drain-to-Source breakdown V(BR)DSS 60 voltage RDS(ON) FET on resistance Test Conditions Units 18 40 PWM comparator threshold in COMP COMP pin star-up local fOTAn 0.7 oscillation frequency, n=1-2 COMP to VS rising edge Ton_n propagation delay, n=1-2 COMP to VS trailing edge Toff_n propagation delay, n=1-2 Deadtime: Low-side turn-off to High-side turn-on (DTLO-HO) & DTn High-side turn-off to Low-side turn-on (DTHO-LO) , n=1-2 Power MOSFET (FET1, FET2, FET3, FET4) (IR4302) Drain-to-Source breakdown V(BR)DSS 80 voltage FET on resistance Max 0 - VthPWM RDS(ON) Typ - Qg Total gate charge ILK0 VP leakage current, VS=VN ILK1 VP leakage current, VS=VP Power MOSFET (FET1, FET2, FET3, FET4) (IR4312) Drain-to-Source breakdown 40 V(BR)DSS voltage RDS(ON) FET on resistance Qg Total gate charge ILK0 VP leakage current, VS=VN - - 20 A ILK1 VP leakage current, VS=VP - - 50 A 9 www.irf.com (c) 2013 International Rectifier CCOMP=1nF, Rf=0 VIN+=0V, VIN=10mV VCSD =GND VP=30V, VN=-30V, VGS=0V, ID=250uA VGS=10V, ID=3.3A VP=80V, VCSD =VSS VGS=0V, ID=250uA VGS=10V, ID=3.3A VP=60V, VCSD =VSS VGS=0V, ID=250uA ID=3.6A VGS=10V VP=40V, VCSD =VSS Apr 3, 2013 IR43x2 Electrical Characteristics (cont'd) VCC,VBS= 12 V, VSS=VS1=VS2=VN1=VN2=COM=0V, VAA=9.6V and TA=25C unless otherwise specified. Symbol Definition Protection Over current detection IOCPn Positive threshold, n=1-2 Over current detection IOCNn Negatitive threshold, n=1-2 CSD pin shutdown release Vth1 threshold Vth2 CSD pin self reset threshold Min Typ Max Units Test Conditions - 16 - A - -16 - A 0.62xVAA 0.70xVAA 0.78xVAA V 0.26xVAA 0.30xVAA 0.34xVAA V VCSD = VSS +4.8V VCSD = VSS +4.8V ICSD+ CSD pin discharge current 70 100 130 A ICSD- CSD pin charge current 70 100 130 A - - 250 ns COMP = VSS - - 500 ns COMP = VSS - - 500 ns COMP = VSS 0.85xVAA 0.90xVAA 0.95xVAA V 0.05xVAA 0.10xVAA 0.15xVAA V tSDn tOCPn tOCNn Vth+CLIP Vth-CLIP tCLIP tCLIPmin TSD TSDHYS 10 Shutdown propagation delay from VS < Vth1 to Shutdown, n=1-2 CHn propagation delay time from IOn > IOCPn to Shutdown, n=1-2 CHn propagation delay time from IOn < IOCNn to Shutdown, n=1-2 Clip detection positive threshold in COMP Clip detection negative threshold in COMP Clipping detection propagation delay Clipping detection minimum output duration Over temperature shutdown threshold in controller IC Over temperature shutdown threshold hysteresis www.irf.com - 40 - ns - 3 - us - 105 - C - 7 - C (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Functional Bock Diagram 11 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Input/Output Pin Equivalent Circuit Diagrams CSHn VPn 10k VBn 15 V Clamp ESD Diode D G ESD Diode HOn S VSn 200 V V CC VCC 15 V Clamp ESD Diode D G LOn ESD Diode S COM VNn COM2 12 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Input/Output Pin Equivalent Circuit Diagrams (Cont'd) CHARGE VAA ESD Diode CSD ESD Diode VSS DISCHARGE 13 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Lead Definitions Pin # Symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 CLIP COMP2 IN-2 IN+2 GND VSS VAA IN+1 IN-1 COMP1 CSD FAULT NC VCC COM CSH1 VB1 VS1 VP1 VS1 VN1 VN2 VS2 VP2 VS2 VB2 CSH2 COM NC NC COM 14 www.irf.com Description Clipping detection output, open drain, referenced to GND CH2 PWM comparator input CH2 Analog inverting input CH2 Analog non-inverting input GND for internal shunt zener diodes to VAA and VSS Floating input negative supply Floating input positive supply CH1 Analog non-inverting input CH1 Analog inverting input CH1 PWM comparator input Shutdown timing capacitor / shutdown input Fault reporting output, open drain, referenced to GND Low side supply Low side supply return, internally connected to pin 31 CH1 High side over current sensing input, referenced to VS1 CH1 High side floating supply CH1 PWM output, internally connected to pin 20 CH1 Positive power supply CH1 PWM output CH1 Negative power supply, connect to COM externally CH2 Negative power supply, connect to COM externally CH2 PWM output, internally connected to pin 25 CH2 Positive power supply CH2 PWM output CH2 High side floating supply CH2 High side over current sensing input, referenced to VS2 Low side supply return, internally connected to pin 31 Low side supply return (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Lead Assignments (Top View) 15 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Package Details 16 www.irf.com (c) 2013 International Rectifier Apr 3, 2013 IR43x2 Board Mounting Information Refer to Application Note AN-1170 Audio Power Quad Flat No-Lead (PQFN) Board Mounting Application Note. Part Marking Information Ordering Information Standard Pack Base Part Number Package Type PQFN44 7x7mm PQFN44 7x7mm PQFN44 7x7mm IR4302M IR4322M IR4312M Complete Part Number Form Quantity Tape and Reel 3000 IR4302MTRPBF Tape and Reel 3000 IR4322MTRPBF Tape and Reel 3000 IR4312MTRPBF The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR's Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245 Tel: (310) 252-7105 17 www.irf.com (c) 2013 International Rectifier Apr 3, 2013