M22-WRS-A1 - EATON - Product.Network

DATASHEET - M22-WRS-A1

Key-operated actuator, maintained, 2 positions, Key withdrawable: 0,

Bezel: titanium

Part no. M22-WRS-A1

Catalog No. 229092

Alternate Catalog

No.

M22-WRS-A1Q



Delivery program

Product range   RMQ-Titan

Basic function   Key-operated buttons

Mounting hole diameter ⌀ mm 22.5

Single unit/Complete unit   Single unit

Design   Key operated

   maintained

Function:   

  

60°

   Not suitable for master key systems

   2 positions

Key withdrawable in position   

   0

Degree of Protection   IP66

Front ring   Bezel: titanium

Connection to SmartWire-DT   yes

with SWD-RMQ connections

Instructions   Stay-put/spring-return function, can be changed with coding parts M22-XC-Y

Key withdraw convertible with coding adapters M22-XC-...

Information about equipment supplied   With 1 key

Technical data

General

Standards   IEC/EN 60947

VDE 0660

Lifespan, mechanical Operations x 106> 0.1

Operating frequency Operations/h  ≦ 100

Operating torque  Nm ≦ 0.5

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Degree of Protection   IP66

Ambient temperature   

Open  °C -25 - +70

Mounting position   As required

Mechanical shock resistance  g 30

Shock duration 11 ms

Sinusoidal

according to IEC 60068-2-27

shipping classiﬁcation   DNV

  

07/05/2021 Eaton 229092 ED2021 V81.0 EN 1 / 3

Design veriﬁcation as per IEC/EN 61439

Technical data for design veriﬁcation   

Rated operational current for speciﬁed heat dissipation InA 0

Heat dissipation per pole, current-dependent Pvid W 0

Equipment heat dissipation, current-dependent Pvid W 0

Static heat dissipation, non-current-dependent Pvs W 0

Heat dissipation capacity Pdiss W 0

Operating ambient temperature min.  °C -25

Operating ambient temperature max.  °C 70

IEC/EN 61439 design veriﬁcation   

10.2 Strength of materials and parts   

10.2.2 Corrosion resistance   Meets the product standard's requirements.

10.2.3.1 Veriﬁcation of thermal stability of enclosures   Meets the product standard's requirements.

10.2.3.2 Veriﬁcation of resistance of insulating materials to normal heat   Meets the product standard's requirements.

10.2.3.3 Veriﬁcation of resistance of insulating materials to abnormal heat

and ﬁre due to internal electric eﬀects

  Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire

10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions   Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances   Meets the product standard's requirements.

10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.

10.8 Connections for external conductors   Is the panel builder's responsibility.

10.9 Insulation properties   

10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.

10.10 Temperature rise   Not applicable.

10.11 Short-circuit rating   Is the panel builder's responsibility. The speciﬁcations for the switchgear must be

observed.

10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The speciﬁcations for the switchgear must be

observed.

10.13 Mechanical function   The device meets the requirements, provided the information in the instruction

leaﬂet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Front element for selector switch (EC000222)

Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Front element for selector switches (ecl@ss10.0.1-27-37-12-13

[AKF031014])

Number of switch positions   2

Type of control element   Key

Suitable for illumination   No

Colour control element   Black

Colour indicator light cap   Other

Construction type lens   Round

Hole diameter  mm 22.5

Width opening  mm 0

Height opening  mm 0

Switching function latching   Yes

Spring-return   No

With front ring   Yes

Material front ring   Plastic

Colour front ring   Other

Degree of protection (IP), front side   IP66

07/05/2021 Eaton 229092 ED2021 V81.0 EN 2 / 3

Degree of protection (NEMA)   4X

Approvals

Product Standards   IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking

UL File No.   E29184

UL Category Control No.   NKCR

CSA File No.   012528

CSA Class No.   3211-03

North America Certiﬁcation   UL listed, CSA certiﬁed

Degree of Protection   UL/CSA Type 3R, 4X, 12, 13

Dimensions

Individual lock mechanism

Additional product information (links)

IL04716002Z (AWA1160-1745) RMQ-Titan System

IL04716002Z (AWA1160-1745) RMQ-Titan

System

https://es-assets.eaton.com/DOCUMENTATION/AWA_INSTRUCTIONS/IL04716002Z2020_09.pdf

07/05/2021 Eaton Industries GmbH

http://www.eaton.eu

Eaton 229092 ED2021 V81.0 EN

3 / 3