EXQ50 Series Single output DC/DC CONVERTERS 36-50W High Efficiency DC/DC Converters 1 * * * * High efficiency topology, 90% at 5V and 86.5% typical at 1.8V Low profile, open-frame package Industry standard footprint Wide operating temperature, -40C to +90C (with derating) * 90% to 110% output trim * No minimum load * Remote on/off EXQ50 series high-efficiency, open-frame, isolated DC/DC converters have an industry standard quarter-brick footprint and a height of just 0.4 inches. The converters provide up to 50 Watts of output power, are capable of delivering very high current at low voltages, and offer exceptional power densities for today's high-end applications. The first four models in the series feature an input voltage range of 33 to 75VDC and are available with output voltages of 5.0V, 3.3V, 2.5V or 1.8V. The output voltage of each model is adjustable from 90% to 110% of its nominal value. Typical efficiencies are 90% for the 5V model, 89% for the 3.3V, 88% for the 2.5V and 86.5% for the 1.8V. All EXQ50 series converters have a remote on/off capability, and are fully protected against over-voltage, over-temperature and short-circuit conditions. Featuring full international safety approval, including EN60950 (TUV Product Service) and UL/cUL 60950, EXQ50 series converters reduce compliance costs and time to market. TUV 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS Total error EMC CHARACTERISTICS (See Note 8) 4.5% Set point accuracy 2.0% max. Line regulation Low line to high line 0.3% max. Load regulation Full load to min. load 0.3% max. Voltage adjustability Output remote sense range 90% to 110% (See Note 9) 10% Minimum load Overshoot 0A At turn-on and turn-off Undershoot Ripple and noise None None 5Hz to 20MHz Transient response (See Note 1) 120mV pk-pk 30mV rms 5% max. deviation 200s recovery to within total error band Radiated emissions Immunity: ESD air ESD contact EFT DC Input Radiated field enclosure Conducted (DC power) Conducted (signal) Input transients EN55022 (See Note 2) EN55022 (See Note 2) EN55022 Input voltage range 48Vin nominal Input current No load Remote OFF 33 to 75VDC 60mA 25mA Input current (max.) (See Note 3) 1.73A max. @ Io max. and Vin = 33 (See Note 5) Active high remote ON/OFF Logic compatibility ON OFF 110mA (pk-pk) Level A Level B Level A EN61000-4-2 EN61000-4-2 EN61000-4-4 EN61000-4-3 EN61000-4-6 EN61000-4-6 ETS 300 132-2, ETR 283 8kV, 15kV 6kV, 8kV 2kV (NP) 10V/m 10V (NP) 10V (NP) GENERAL SPECIFICATIONS Efficiency See table Operational insulation Input/output Switching frequency Fixed Approvals and standards (See Note 4) EN60950 (TUV Product Service) UL/cUL60950 UL94V-0 Weight MTBF 1500VDC 350kHz Material flammability INPUT SPECIFICATIONS Input reflected ripple Conducted emissions 25g (0.88oz) MIL-HDBK-217F @ 40C, 100% load ground benign >292,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating temperature -40C to +90C Non-operating -40C to +125C (See Note 7) Open collector ref to -input Open circuit or <12VDC <1.2VDC Undervoltage lockout Power up Power down 32.5V 30.5V Start-up time (See Note 6) Power up Remote ON/OFF 10ms 3ms File Name: EXQ50S.PDF Rev: 01 Nov 2002 EXQ50 Series Single output DC/DC CONVERTERS 36-50W High Efficiency DC/DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (7) 36W 33-75VDC 2.3VDC 1.8V 0A 20A 86.5% 0.3% 0.3% EXQ50-48S1V8 50W 50W 33-75VDC 3.0VDC 2.5V 0A 20A 88.0% 0.3% 0.3% EXQ50-48S2V5 33-75VDC 3.9VDC 3.3V 0A 15A 89.0% 0.3% 0.3% EXQ50-48S3V3 50W 33-75VDC 6.0VDC 5.0V 0A 10A 90.0% 0.3% 0.3% EXQ50-48S05 Notes REGULATION (10) PROTECTION 4 -Vout 5 -Sense 6 Trim 7 +Sense 8 +Vout International Safety Standard Approvals 1.4500.020 (36.830.5) -Vin Vout+ Vin+ Sense+ Remote on/off Trim SenseVout- Vin- Top view Seating Plane 0.138 (3.50) REF 2.000 (50.80) 0.140 (3.56) 0.150 (3.81) o0.040 0.002 (o1.04 0.05) 6 Places o0.062 0.002 (o1.57 0.05) 2 Places VoutSenseTrim Sense+ Vout+ VinRemote on/off Vin+ Bottom view All dimensions in inches (mm) All tolerances 0.010in (0.25mm) Unless otherwise stated 0.450 (11.43) 3 2.3000.020 (58.420.5) 0.600 (15.24) On/Off CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. 0.300 (7.62) 2 ETS300-132-2 input voltage and current requirements 0.017 (0.43) Min clearance +Vin Central office interface A 0.150 (3.81) 1 Non-latching clamp 0.435 (11.05) FUNCTION Continuous TELECOM SPECIFICATION 0.300 (7.62) PIN NUMBER (<20m short) Overvoltage protection 0.435 (11.05) PIN CONNECTIONS Short circuit protection 0.300 (7.62) di/dt = 0.1A/s, Vin = 48VDC, Tc = 25C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 2 The EXQ50 meets level A and level B conducted emissions only with external components connected before the input pins to the converter. See Application Note 120 for details. 3 Recommended input fusing is a 3.15A HRC 200V rated fuse. 4 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 5 Measured with no external Pi filter. Significant reduction possible with external filter. 6 Start-up into resistive load. 7 Active low remote On/Off is available. Standard product is active high. When ordering active low parts, designate with the Suffix '-R', e.g EXQ50-48S3V3-R. 8 This parameter is calculated at worst case line, load, temperature and initial settings. 9 This is inclusive of the output trim range. If 6.0% trim-up is used, for example, then only 4.0% output sense is available. 10 Maximum, not typical, specification. 0.4000.017 (10.180.44) Installed HT 1 UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950 File No. E174104 TUV TUV Product Service. Certificate No. B 01 11 38572 029 Data Sheet (c) Artesyn Technologies(R) 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: EXQ50S.PDF Rev: 01 Nov 2002