3.2x1.6mm SMD CHIP LED LAMP Part Number: APTL3216PBC/A PRELIMINARY SPEC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. The Blue source color devices are made with InGaN z LOW POWER CONSUMPTION. on SiC Light Emitting Diode. z IDEAL FOR BACKLIGHT AND INDICATOR. Static electricity and surge damage the LEDS. z VARIOUS COLORS AND LENS TYPES AVAILABLE. It is recommended to use a wrist band or anti-electrostatic z PACKAGE : 2000PCS / REEL. glove when handling the LEDs. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. All devices, equipment and machinery must be electrically z RoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3794 REV NO: V.2 DATE: JUN/19/2008 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203005474 Selection Guide Part No. Dice APTL3216PBC/A Blue (InGaN) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type WATER CLEAR Min. Typ. 21/2 50 200 70 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3794 REV NO: V.2 DATE: JUN/19/2008 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203005474 Blue APTL3216PBC/A SPEC NO: DSAH3794 REV NO: V.2 DATE: JUN/19/2008 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203005474 APTL3216PBC/A Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH3794 REV NO: V.2 DATE: JUN/19/2008 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203005474 PACKING & LABEL SPECIFICATIONS APTL3216PBC/A SPEC NO: DSAH3794 REV NO: V.2 DATE: JUN/19/2008 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203005474