1352801064 - AMPHENOL - Product.Network

P-NS

www.vishay.com Vishay Dale Thin Film

Revision: 02-May-16 1Document Number: 60023

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Commercial Thin Film Resistor, Surface Mount Chip

For applications requiring low noise, stability, low

temperature coefficient of resistance, and low voltage

coefficient, all Vishay’s proven precision thin film

wraparound resistors will meet your exact requirements.

Manufactured with the same material and processes as QPL

and manufactured in a QPL facility.

CONSTRUCTION

FEATURES

• Moisture resistant (SPM) special passivation

method

• Non-standard values available

• Pre-tinned terminations over nickel barrier

(gold available)

•

Very low noise and voltage coefficient



(< -35 dB, 0.1 ppm/V)

•Non-inductive

• Laser-trimmed tolerances to 0.02 %

• In-lot tracking less than 5 ppm/°C

• Epoxy bondable termination available

• Sulfur resistant (per ASTM B809-95 humid vapor test)

• Flame resistant UL 94 V-0

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non-RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details.

TYPICAL PERFORMANCE

Notes

(1) 0705 and 0805 are the same (only use 0805 when ordering)

(2) Values > 1M best TCR ± 25 ppm/°C

Actual Size

0505

Adhesion Layer

High Purity

Alumina Substrate

Nickel Barrier

Solder

Coating

Passivated Nichrome

Resistive Film

SPM Passivation

Enhancement

ABSOLUTE

TCR 25

TOL. 0.1

Available

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Passivated nichrome -

Resistance Range 10  to 6.19 M-

TCR: Absolute ± 10 ppm/°C to 100 ppm/°C -55 °C to +125 °C

Tolerance: Absolute ± 0.02 % to ± 5 % +25 °C

Stability: Absolute R ± 0.02 % 2000 h at 70 °C

Stability: Ratio --

Voltage Coefficient 0.1 ppm/V (typical) -

Working Voltage 75 V to 200 V -

Operating Temperature Range -55 °C to +155 °C -

Storage Temperature Range -55 °C to +155 °C -

Noise < -35 dB (typical) -

Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C

COMPONENT RATINGS

CASE SIZE (1) POWER RATING

(mW)

WORKING VOLTAGE

(V)

RESISTANCE RANGE ()

 0.1 % < 0.1 %

0402 50 75 24.9 to 100K 250 to 100K

0502 100 75 20 to 150K 250 to 150K

0505 150 75 20 to 301K 250 to 301K

0603 150 75 10 to 261K 250 to 261K

0705 250 100 10 to 475K 250 to 475K

0805 250 100 10 to 475K 250 to 475K

1005 250 100 10 to 649K 250 to 649K

1010 500 150 50 to 1M 250 to 1M

1206 400 200 10 to 1.5M (2) 250 to 1M

1505 400 150 10 to 1M 250 to 1M

2208 800 150 10 to 3.16M (2) 250 to 1M

2010 800 200 10 to 4.02M (2) 250 to 1M

2512 1000 200 10 to 6.19M (2) 250 to 1M

P-NS

www.vishay.com Vishay Dale Thin Film

Revision: 02-May-16 2Document Number: 60023

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) 0705 and 0805 are the same (only use 0805 when ordering).

DIMENSIONS in inches

CASE SIZE TERM L W T D E

0402 B 0.042 ± 0.008 0.022 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.010 ± 0.005

0502 B 0.055 ± 0.006 0.025 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005

0505 B 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005

0603 B 0.064 ± 0.006 0.032 ± 0.005 0.020 max. 0.012 ± 0.005 0.015 ± 0.005

0705, 0805 (1) B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005

1005 B 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005

1010 B 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005

1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010

1505 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005

2010 B 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

2208 B 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

2512 B 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

ENVIRONMENTAL TESTS

ENVIRONMENTAL TEST 10 k R

± (%)

100 k R

± (%)

Thermal Shock 0.02 0.02

Short Time Overload 0.01 0.01

Low Temperature Operation 0.01 0.01

Resistance to Solder Heat 0.04 0.03

Moisture Resistance 0.02 0.01

High Temperature Exposure 0.03 0.06

Load Life (10 000 h, + 70 °C) 0.05 0.05

TCR ± 25 ppm/°C ± 25 ppm/°C

DERATING CURVE

Ambient Temperature °C

070125155

100

Precent of Rated Power

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: P-1206E1002BBTS

GLOBAL

MODEL

CASE

SIZE

TCR

CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING

P- 0402

0502

0505

0603

0805

1005

1010

1206

1505

2208

2010

2512

= ± 10 ppm/°C

(2)



= ± 15 ppm/°C



= ± 25 ppm/°C



= ± 50 ppm/°C



= ± 100 ppm/°C



Note



(2)



49.9



The first 3 digits

are significant figures

and the

last digit specifies the

number of

zeros to follow.

“R” designates the

decimal point.

Example:



10R0 = 10



1001 = 1 k



1002 = 10 k



= ± 0.02 %

(3)



= ± 0.05 %

(3)



= ± 0.1 %



= ± 0.5 %



= ± 1 %



= ± 2 %



= ± 5 %



Note



(3)

For values





250



= Wraparound



Sn/Pb solder



63 % Sn/37 % Pb



w/ nickel barrier



= Wraparound Au



over Ni (gold)



termination



epoxy bondable



RoHS-compliant - e4



= Wraparound



electroplated 100 %



pure matte tin



RoHS-compliant e3

BULK



= 100 min., 1 mult



WAFFLE



= 100 min., 1 mult



= 100 min.,100 mult



= 100 min.,1 mult

(4)



= 100 min.,1 mult

(5)



TAPE AND REEL



= 100 min., 100 mult



= 1000 min., 1000 mult

(6)



= 300 min., 300 mult



= 500 min., 500 mult



= Full reel



= 100 min., 1 mult



= 100 min., 1 mult

(4)



= 100 min., 1 mult

(5)

Notes



(4)

Item single lot date code



(5)

Package unit single lot date code



(6)

Preferred packaging code

Historical Part Number Example: P0805H6801BBT (for reference purposes only)

P 0805 H 6801 B B T

STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING

06E1 02B021 BTSP-

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.