9-0
1
5
6
7
8
9
10
11
12
Software
Solutions
3
PXI-Based
Instruments
PXI/
CompactPCI
Platforms
2
PXI/
CompactPCI
Modules
PCI DAQ
Cards
PCI DIO
Cards
PC/
104-Plus
Products
ISA DAS/
DIO Cards
Wiring
Termination
Boards
Motion
Control
Cards
Machine
Vision
Products
Remote I/O
Modules
4
Wiring Termination
100-pin, 68-pin, and 50-pin SCSI-II Connectors
20-pin Header Connectors
37-pin D-type Connectors
50-pin Ribbon Connectors
DIN-96DI/DO
(Includes ACL-102100)
ACLD-9182A
(Includes ACL-10120-1)
ACLD-9185
(Includes ACL-10120-1)
ACLD-9881
(Includes ACL-10137-1)
ACLD-9178
(Includes 2 ACL-10120-1)
DIN-20P
(Includes ACL-10120-1)
ACLD-9137 (male)
ACLD-9137F (female)
ACLD-9138
(Includes ACL-10237-1)
ACLD-8125
(Includes ACL-10137-1)
ACLD-9188
(Includes 2 ACL-10120-1)
DIN-37D
(Includes ACL-10137-1)
DIN-24G
(for Grayhill IO modules)
TB-24R
(Includes ACL-10150-1.5)
TB-24P
(Includes ACL-10150-1.5)
TB-16P8R
(Includes ACL-10150-1.5)
DIN-50P
(Includes ACL-10150-1.5)
DIN-24R/12, DIN-24R/24
(Includes ACL-10150-1.5)
DIN-24P
(Includes ACL-10150-1.5)
TB-24
(Includes ACL-10150-1.5)
DIN-68S/1S
(Includes ACL-10569-1)
DIN-68S/1M
(Includes ACL-10568-1)
DIN-100S
(Includes ACL-102100)
DIN-50S
(Includes ACL-10250)
DIN-502S
(Includes ACL-10252)
P. 9-1
P. 9-3 P. 9-2 P. 9-2 P. 9-3
P. 9-5 P. 9-2 P. 9-2 P. 9-3
P. 9-5 P. 9-5 P. 9-5 P. 9-5
P. 9-4 P. 9-4 P. 9-6 P. 9-6 P. 9-5
P. 9-6 P. 9-6 P. 9-6 P. 9-6 P. 9-5
www.adlinktech.com
All specifications are subject to change without further notice.
9-1
DIN-96DI
96-CH Isolated DI Termination Board with DIN-Rail Mounting
96-CH isolated digital inputs
For use with PCI-7396
Isolated input voltage up to 24 V
2500 VRMS optical isolation
Screw terminals for easy field wiring
Specifications
Isolated Digital Input
• Number of channels: 96
• Maximum input range: 24 V
• Digital logic levels
0-24 V, non-polarity
Input high voltage: 10-24 V
Input low voltage: 0-2 V
Input Resistance: 4.7 kΩ @ 0.5W
Isolation voltage: 2500 VRMS
I/O connector: 100-pin SCSI-II female
Features
+5V
48 mA maximum
DIN-96DO
96-CH Isolated DO Termination Board with DIN-Rail Mounting
96-CH isolated digital outputs
For use with PCI-7396
Sink current up to 500 mA on each isolated output
2500 VRMS optical isolation
Screw terminals for easy field wiring
Specifications
Number of channels: 96
Output type: open collector Darlington transistor
Sink current
• Max. 500 mA for only one Darlington pair
• 500 mA for all Darlington pair @ 20% duty
Power dissipation: Max. 2.25 W per chip (8 DO
channels)
Supply voltage: 5-35 VDC
Isolation voltage: 2500 VRMS
Features
+5V
102 mA maximum
Operating temperature: 0 to 60 ˚C
Storage temperature: -20 to 80 ˚C
Relative humidity: 5 to 95%, noncondensing
Power consumption
Dimensions: 226 mm x 121 mm x 48 mm (WxLxH)
Connector: 100-pin SCSI-II female
Operating temperature: 0 to 60 ˚C
Storage temperature: -20 to 80 ˚C
Relative humidity: 5 to 95%, noncondensing
Power consumption
Dimensions: 226 mm x 121 mm x 48 mm (WxLxH)
Ordering Information
DIN-96DO
96-CH Isolated DO Termination Board with
DIN-Rail Mounting (Including One 1-meter
ACL-102100 Cable)
Ordering Information
DIN-96DI
96-CH Isolated DI Termination Board with
DIN-Rail Mounting (Including One 1-meter
ACL-102100 Cable)
Isolated DIO Termination Boards for PCI-7396
www.adlinktech.com All specifications are subject to change without further notice.
9-2
Termination Boards for TTL DIO Cards
DIN-24R/TB-24R
Termination Board with 24 Relay Outputs
24-CH single-pole, double-throw (SPDT form C) relay outputs
50-pin Opto-22™ compatible connector
Maximum switching voltage 220 VDC/250 VAC
Maximum switching current up to 2 ADC/AC
LED indicator for relay status
On-board relay driver circuitry
Screw terminals for easy filed wiring
DIN socket available on DIN-24R
50-pin SCSI-type connector available on DIN-24R to interface
with ND-6058
Introduction
The DIN-24R and TB-24R relay output boards are
designed for industrial control applications. It
contains 24 electro-mechanical SPDT relays that
can be driven by the 24-bit digital output ports of
the PCI-7224, PCI-7248, PCI-7296, ACL-7112,
ACL-7124 and PET-48DIO, ND-6058.
Each relay's switching capacity is 60 W, 125 VA.
The normally closed, and common contacts for
each relay are made available for maximum
flexibility.
Features
Specification
Relay Output
• Number of channels: 24
• Relay type: SPDT (Form C)
• Contact rating
AC: 125 VAC @ 0.6 A
DC: 30 VDC @ 2 A
• Breakdown voltage: 1500 VRMS
• Contact resistance: 50 mΩ
• Relay ON/OFF time
Operate time: 3 ms
Release time: 3 ms
+12 V +24 V
TB-24R/12
DIN-24R/12 288 mA maximum --
TB-24R/24
DIN-24R/24 -- 144 mA maximum
• LED Indicators for relay status: per channel
• Expected life: 5 x 105 operations @ 2 A, 30 VDC
• External coil excitation voltage
12 V nominal, 19.2 V maximum (TB-24R/12 &
DIN-24R/12)
24 V nominal, 38.5 V maximum (TB-24R/24 &
DIN-24R/24)
I/O Connector
• 50-pin ribbon male
• 50-pin SCSI-II female
Operating temperature: 0 to 60 ºC
Storage temperature: -20 to 80 ºC
Relative humidity: 5 to 95%, noncondensing
Power consumption
Dimensions
• TB-24R: 220 mm x 132 mm x 15 mm (WxLxH)
• DIN-24R: 203 mm x 120 mm x 55 mm (WxLxH)
DIN-24P/TB-24P
Termination Board with 24 Opto-Isolated Digital Inputs
24-CH opto-isolated digital inputs
50-pin Opto-22 compatible connector
Non-polarity digital input range
Isolated input voltage up to 24 V
5000 VRMS optical isolation
Jumper selectable for voltage input or dry-contact input mode
LED indicator for input status
Screw terminals for easy field wiring
DIN socket is available on DIN-24P
50-pin SCSI-type connector available on DIN-24P to interface
with ND-6058
Introduction
The DIN-24P and TB-24P digital input termination
boards feature high-voltage opto-isolation on all
input channels. They provides 24 channels that
are accessed through a single 50-pin connector,
standard on the NuDAQ digital I/O boards, such
as ACL-7122, ACL-7124, PET-48DIO, PCI-7224,
PCI-7248, PCI-7296 and ND-6058.
Features
Specification
Input modes (jumper selectable on per channel
basis)
• Voltage input
• Dry contact input
Isolated digital input
• Number of channels: 24, maximum
• Maximum input range: 24 V, non-polarity
• Digital logic levels
0-24 V, non-polarity
Input high voltage: 5-24 V
Input low voltage: 0-1.5 V
• Input resistance:1.2 kΩ @ 0.5 W
• Isolation voltage: 5000 VRMS
Dry contact input
• Number of channels: 24
• Internal pull-up voltage supply: +5 VDC
LED Indicators for input status: one per channel
I/O Connector
• 50-pin ribbon male
• 50-pin SCSI-II female
Operating temperature: 0 to 60 ºC
Storage temperature: -20 to 80 ºC
Relative humidity: 5 to 95%, noncondensing
1
5
6
7
8
9
10
11
12
Software
Solutions
3
PXI-Based
Instruments
PXI/
CompactPCI
Platforms
2
PXI/
CompactPCI
Modules
PCI DAQ
Cards
PCI DIO
Cards
PC/
104-Plus
Products
ISA DAS/
DIO Cards
Wiring
Termination
Boards
Motion
Control
Cards
Machine
Vision
Products
Remote I/O
Modules
4
Ordering Information
TB-24R/12
Te r mination Board with 24-CH Relay Outputs
@ 12V Coil Voltage (Including One 1.5-meter
ACL-10150 Cable)
TB-24R/24
Te r mination Board with 24-CH Relay Outputs
@ 24V Coil Voltage (Including One 1.5-meter
ACL-10150 Cable)
DIN-24R/12
Te r mination Board with 24-CH Relay Outputs
@ 12V Coil Voltage and DIN-Rail Mounting
(Including One 1.5-meter ACL-10150 Cable)
DIN-24R/24
Te r mination Board with 24-CH Relay Outputs
@ 24V Coil Voltage and DIN-Rail Mounting
(Including One 1.5-meter ACL-10150 Cable)
+5V
40 mA maximum
Power requirement:
Dimensions
• TB-24P: 220 mm x 132 mm x 23 mm (WxLxH)
• DIN-24P: 259 mm x 121 mm x 55 mm (WxLxH)
Ordering Information
TB-24P/24
Te r mination Board with 24-CH Isolated Digital
Inputs (Including One 1.5-meter ACL-10150
Cable)
DIN-24P/24
Te r mination Board with 24-CH Isolated Digital
Inputs and DIN-Rail Mounting (Including One
1.5-meter ACL-10150 Cable)
www.adlinktech.com
All specifications are subject to change without further notice.
TB-24RDIN-24R
TB-24P
DIN-24P
9-3
TB-16P8R
Termination Board with 16-CH Isolated DI & 8-CH Relay Outputs
16-CH isolated digital inputs
Non-polarity digital input range
Isolated input voltage up to 24 V
5000 VRMS optical isolation
Jumper selectable for voltage input or dry-contact
input mode
8-CH single-pole double-throw (SPDT form C)
relays
Maximum switching voltage 220 VDC/250 VAC
Maximum switching current up to 2 ADC/AC
On-board relay driver circuitry
LED indicators for both input and relay status
Screw terminals for easy field wiring
Specifications
Number of isolated DI channels: 16
Number of relay output channels: 8
LED Indicators for input and output status: one per
channel
Electronics characteristics of isolated DI: refer to
the TB-24P's specifications
Electronics characteristics of relay outputs: refer to
the TB-24R's specifications
Features
TB-24
General Purpose Termination Board for DB-37 and Opto-22 Connectors
Easy connection to boards with 50-pin mating
connector or 37-pin D-sub connector
Breadboard area for custom circuit
Two 37-pin male D-sub connectors
Two 50-pin male mating connectors
Screw terminals for easy field wiring
Breadboard area: 125 mm x 73 mm
Dimensions: 220 mm x 132 mm x 13 mm (WxLxH)
Features
DIN-24G
Termination Board for 24-CH Grayhill I/O Modules
Supports standard or miniature G5 size modules
Te r mination board for installing Grayhill I/O
modules
Up to 24 modules
Port configurable as input or output on 8-CH basis
Dimensions: 371 mm x 126 mm x 49 mm (WxLxH)
Features
+5V +12V
40 mA maximum 100 mA maximum
I/O Connector: 50-pin ribbon male
Operating temperature: 0 to 60 ºC
Storage temperature: -20 to 80 ºC
Relative humidity: 5 to 95%, noncondensing
Power requirements
Dimensions: 220 mm x 132 mm x 22 mm(WxLxH)
Termination Boards for TTL DIO Cards
Ordering Information
DIN-24G
Te r mination Board with 24-CH Grayhill I/O
Modules and DIN-Rail Mounting
Ordering Information
TB-24
General-Purpose Termination Board with
Two 37-pin D-sub Connectors and Two 50-
pin Ribbon Connectors (Including One 1.5-
meter ACL-10150 Cable)
Ordering Information
TB-16P8R/12
Te r mination Board with 16-CH Isolated DI &
8-CH Relay Outputs (Including One 1.5-
meter ACL-10150 Cable)
TB-16P8R/24
Te r mination Board with 16-CH Isolated DI &
8-CH Relay Outputs (Including One 1.5-
meter ACL-10150 Cable)
www.adlinktech.com All specifications are subject to change without further notice.
9-4
Termination Boards for TTL DIO of Multi-Function DAQ Cards
ACLD-9182A
Termination Board with 16-CH Isolated Digital Inputs
16-CH opto-isolated digital inputs
For use with 20-pin ribbon digital input connector of NuDAQ cards
Non-polarity digital input range
Isolated input voltage up to 24 V
5000 VRMS optical isolation
Jumper selectable for voltage input or dry-contact input mode
LED indicator for input status
Screw terminals for easy field wiring
Specifications
Isolated Digital Input
• Number of channels: 16
• Maximum input range: 24 V, non-polarity
• Digital logic levels
0-24V, non-polarity
Input high voltage: 5-24 V
Input low voltage: 0-0.7 V
Features
ACLD-9185
Termination Board with 16-CH Relay Outputs
16-CH single-pole, double-throw (SPDT form C) relay outputs
For use with 20-pin digital input connector of NuDAQ cards
Maximum switching voltage up to 60 VDC/120 VAC
Maximum switching current up to 1 ADC/AC
On-board relay driver circuitry
LED indicators for relay status
Screw terminals for easy field wiring
Specifications
Relay Output
• Number of channels: 16
• Relay type: SPDT (Form C)
• Isolation voltage: 1500 VRMS
• Contact rating
AC: 120 V @ 0.5 A
DC: 24 V @ 1 A
• Breakdown voltage: 1000 VRMS
• Contact resistance: 100 mΩ
• Relay ON/OFF time
Operate time: 6 ms
Release time: 3 ms
• LED indicators for relay status: one per channel
Features
+5 V +12 V
200 mA maximum 528 mA maximum
• Input Resistance: 560 Ω @ 1 W
• Isolation voltage: 5000 VRMS
I/O Connector: 20-pin ribbon male
Operating temperature: 0 to 60 ºC
Storage temperature: -20 to 80 ºC
Relative humidity: 5 to 95%, noncondensing
Dimensions: 205 mm x 114 mm
• Expected life
> 5 x 105 operations @ 1 A, 24 VDC
> 2 x 105 operations @ 0.5 A, 120 VAC
I/O Connector: 20-pin ribbon male
Operating temperature: 0 to 60 ºC
Storage temperature: -20 to 80 ºC
Relative humidity: 5 to 95%, noncondensing
Power consumption
Dimensions: 205 mm x 114 mm
1
5
6
7
8
9
10
11
12
Software
Solutions
3
PXI-Based
Instruments
PXI/
CompactPCI
Platforms
2
PXI/
CompactPCI
Modules
PCI DAQ
Cards
PCI DIO
Cards
PC/
104-Plus
Products
ISA DAS/
DIO Cards
Wiring
Termination
Boards
Motion
Control
Cards
Machine
Vision
Products
Remote I/O
Modules
4
www.adlinktech.com
All specifications are subject to change without further notice.
Ordering Information
ACLD-9182A
Te r mination Board with 16-CH Isolated Digital
Inputs (Including One 1-meter ACL-10120
Cable)
Ordering Information
ACLD-9185
Te r mination Board with 16-CH Relay Outputs
(Including One 1-meter ACL-10120 Cable)
9-5
DIN Rail Screw Terminal Boards
Features
General
Universal screw termination boards for easy wiring
DIN socket for easy mounting in DIN-rail
DIN-100S
Te r mination board with one 100-pin SCSI-II connector and DIN-rail mounting
General purpose termination board for 100-pin SCSI-II cable
On-board connector type: 100-pin SCSI-II female
Shipped with 1-meter ACL-102100 cable
Dimensions: 158 mm x 120 mm x 52 mm (WxLxH)
DIN-68S/1M, DIN-68S/1S
Te r mination board with one 68-pin SCSI-II connector and DIN-rail mounting
General purpose termination board for 68-pin SCSI-II cable
On-board connector type: 68-pin SCSI-II female
Shipped with 1-meter ACL-10568-1 cable in DIN-68S/1M
Shipped with 1-meter ACL-10569-1 cable in DIN-68S/1S
Dimensions: 103 mm x 85 mm x 43 mm (WxLxH)
DIN-50S
Te r mination board with one 50-pin SCSI-II connector and DIN-rail mounting
General purpose termination board for 50-pin SCSI -II cable
On-board connector type: 50-pin SCSI-II female
Plastic cover for protection of wiring
Shipped with 1-meter ACL-10250 cable
Dimensions: 125 mm x 85 mm x 50 mm (WxLxH)
DIN-502S
Two pieces of DIN-50S
Split 100 signals of 100-pin SCSI-II connector to two DIN-50S sockets
Shipped with 1-meter ACL-10252 cable
Dimensions: 125 mm x 85 mm x 50 mm (WxLxH)
DIN-50P
Te r mination board with one 50-pin ribbon connector and DIN-rail mounting
General purpose termination board for 50-pin ribbon flex cable
Shipped with 1.5-meter ACL-10150-1.5 cable
Dimensions: 146 mm x 85 mm x 55 mm (WxLxH)
DIN-37D
Te r mination board with one 37-pin D-sub connector and DIN-rail mounting
General purpose termination board for D-sub 37-pin cable
On-board connector type: 37-pin D-sub female
Shipped with 1-meter ACL-10137-1 cable
Dimensions: 113 mm x 85 mm x 52 mm (WxLxH)
DIN-20P
Te r mination board with one 20-pin ribbon connector and DIN-rail mounting
General purpose termination board for 20-pin ribbon cable
Shipped with 1-meter ACL-10120-1 cable
Dimensions: 68 mm x 85 mm x 55 mm (WxLxH)
DIN-100S
Te r mination Board with a 100-pin SCSI-II Connector and DIN-Rail Mounting
(Including One 1-meter ACL-102100 Cable)
DIN-68S/1M
Te r mination Board with a 68-pin SCSI-II Connector and DIN-Rail Mounting
(Including One 1-meter ACL-10568 Cable)
DIN-68S/1S
Te r mination Board with a 68-pin SCSI-II Connector and DIN-Rail Mounting
(Including One 1-meter ACL-10569 Cable)
DIN-50S
Te r mination Board with a 50-pin SCSI-II Connector and DIN-Rail Mounting
(Including One 1-meter ACL-10250 Cable)
DIN-502S
Two Pieces of DIN-50S Termination Board (Including One 1-meter ACL-10252
Cable)
DIN-50P
Te r mination Board with a 50-pin Ribbon Connector and DIN-Rail Mounting
(Including One 1.5-meter ACL-10150 Cable)
DIN-37D
Te r mination Board with a 37-pin D-sub Connector and DIN-Rail Mounting
(Including One 1-meter ACL-10137 Cable)
DIN-20P
Te r mination Board with a 20-pin Ribbon Connector and DIN-Rail Mounting
(Including One 1-meter ACL-10120 Cable)
Ordering Information
General Purpose Termination Boards
www.adlinktech.com All specifications are subject to change without further notice.
DIN-100S
DIN-68S/1M, DIN-68S/1S
DIN-50S
DIN-502S
DIN-50P
DIN-37D
DIN-20P
9-6
General Purpose Termination Boards
ACLD Screw Termination Boards
Features
General
Low cost universal screw termination boards
Blank pads accommodate applications such as break detection, low-pass filter,
current shunt and voltage attenuator on ACLD-9881, ACLD-9178, ACLD-9188,
ACLD-9138, and ACLD-8125
Tab le-top mounting using nylon standoffs
ACLD-9881
General-Purpose Termination Board with One 37-pin D-sub Connector for PCI-
9113A and ACL-8113A
For use with PCI-9113A and ACL-8113
On-board 37-pin D-sub female connector
Reliable screw clamp termination blocks
Shipped with one 1-meter ACL-10137 cable
Dimensions: 222 mm x 105 mm
ACLD-9188
General-Purpose Termination Board with Two 20-pin Ribbon Connectors and
One 37-pin D-sub Connector
On-board 20-pin ribbon male connector x 2
On-board 37-pin D-sub female connector
Reliable screw clamp termination blocks
Shipped with two 1-meter ACL-10120 cables
Dimensions: 222 mm x 114 mm
ACLD-9178
General-Purpose Termination Board with Two 20-pin Ribbon Connectors
On-board 20-pin ribbon male connector x 2
Reliable screw clamp termination blocks
Shipped with two 1-meter ACL-10120 Cables
Dimensions: 103 mm x 114 mm
ACLD-9138
General-Purpose Termination Board with a 37-pin D-sub Connector
On-board 37-pin D-sub female connector
Blank RC circuits for analog input boards
Reliable screw clamp termination blocks
Shipped with one 1-meter ACL-10237 cable
Dimensions: 103 mm x 114 mm
ACLD-9137 / ACLD-9137F
General-Purpose Termination Board with a 37-pin D-sub Connector
ACLD-9137: on-board 37-pin D-sub male connector
ACLD- 9137F: on-board 37-pin D-sub female connector
Reliable screw clamp termination blocks
Dimensions: 124 mm x 72 mm
ACLD-8125
Te r mination Board with a 37-pin D-sub Connector and One Cold Junction
Temperature Sensor
One on-board temperature sensor for cold-junction compensation
Jumper selectable sensor outputs in either DI or SE mode
On-board calibration for the temperature sensor
On-board 37-pin D-sub female connector
Reliable screw clamp termination blocks
Shipped with one 1-meter ACL-10137 cable
Dimensions: 168 mm x 114 mm
ACLD-7285
Te r mination Board with Two 9-pin D-sub Connectors for ACL-6128A
For ACL-6128A analog outputs
On-board 9-pin D-sub female connector x 2
Reliable screw clamp termination blocks
Shipped with two 0.3-meter 9-pin D-sub ribbon cables
Dimensions: 115 mm x 103 mm
ACLD-9881
General-Purpose Termination Board with one 37-pin D-sub Connector
(Including one 1-meter ACL-10137 Cable)
ACLD-9188
General-Purpose Termination Board with Two 20-pin Ribbon Connectors and
One 37-pin D-sub Connector (Including Two 1-meter ACL-10120 Cables)
ACLD-9178
General-Purpose Termination Board with Two 20-pin Ribbon Connectors
(Including Two 1-meter ACL-10120 Cables)
ACLD-9138
General-Purpose Termination Board with a 37-pin D-sub Connector
(Including One 1-meter ACL-10237 Cable)
ACLD-9137
General-Purpose Termination Board with a 37-pin D-sub Male Connector
ACLD-9137F
General-Purpose Termination Board with a 37-pin D-sub Female Connector
ACLD-8125
Te r mination Board with a 37-pin D-sub Connector and One Cold Junction
Temperature Sensor (Including One 1-meter ACL-10137 Cable)
ACLD-7285
Te r mination Board with Two 9-pin D-sub Connectors (Including two 0.3-meter
9-pin D-sub Ribbon Cables)
Ordering Information
1
5
6
7
8
9
10
11
12
Software
Solutions
3
PXI-Based
Instruments
PXI/
CompactPCI
Platforms
2
PXI/
CompactPCI
Modules
PCI DAQ
Cards
PCI DIO
Cards
PC/
104-Plus
Products
ISA DAS/
DIO Cards
Wiring
Termination
Boards
Motion
Control
Cards
Machine
Vision
Products
Remote I/O
Modules
4
www.adlinktech.com
All specifications are subject to change without further notice.
ACLD-9881
ACLD-9188
ACLD-9178
ACLD-9138
ACLD-9137/ACLD-9137F
ACLD-8125
ACLD-7285
9-7
Accessories
Cable Accessories
ACL-10120-1/2
20-Pin Flat Cable,1M/2M
ACL-10220-1/2
20 Pin Shielded & Grounded Cable,1M/2M
ACL-10232
9-Pin D-sub (RS-232) male/female Cable, 5M
ACL-10137-1/2
37-Pin D-sub male/male Cable,1M/2M
ACL-10137 MF
37-Pin D-sub male/female Cable,1M
(for ACLD-9137)
ACL-10237-1
37-Pin D-sub male/male flat Cable,1M
ACL-10337
Two 20-Pin header to 37-Pin D-sub PC back panel
ACL-10437
40-Pin header to 37-Pin D-sub PC back panel
(for ACL-7225,PCI-7200)
ACL-10150-1.5
50-Pin Flat Cable,1.5M
ACL-10250
50-Pin SCSI-II Cable
(Mate with AMP-787082-5, 1M, 2M, 3M)
ACL-102100
100-Pin SCSI-II Cable (Mate with AMP-787082-9)
ACL-10252
100-Pin to 2x50-Pin Cable (for DIN-502S)
ACL-10253
100-Pin to 2x50-Pin Cable
(for PCI-7348 to DIN-24P/R)
ACL-10568-1M
68-Pin SCSI-VHDCI Cable (for DAQ-2000 Series)
(Mate with AMP-787254-1)
ACL-10537
37-Pin D-sub Assembly
ACL-105100
100-Pin SCSI-II Assembly
ACL-10550
50-Pin SCSI-II Assembly
ACL-10569-1
68-Pin SCSI Cable (Mate with AMP-787082-7)
ACL-SSI-2/3/4
SSI Bus Cable for 2/3/4 DAQ-2000 Devices
SMB-SMB-1M
1-Meter SMB to SMB Cable
SMB-BNC-1M
1-Meter SMB to BNC Cable
www.adlinktech.com All specifications are subject to change without further notice.
