CXE15-48S05-R - Emerson - Product.Network

DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters 1

2 YEAR WARRANTY

CXE15 Series

Single output

•High efficiency topology, 87% typical at 5V

•Industry standard footprint

•Wide operating temperature, up to and exceeding 70˚C

(natural convection)

•90% to 110% output trim

•No minimum load

•Overvoltage protection

•Remote on/off control

The CXE15 is a new high efficiency open frame isolated 15 Watt converter series in an

industry standard footprint. The first four models in the series feature an input voltage

range of 33 to 75VDC and are available in output voltages of 5V, 3.3V, 2.5V and 1.8V.

The output voltage on each model is adjustable from 90% to 110% of the nominal

value. Typical efficiencies for the models are 87% for the 5V, 86% for the 3.3V, 85% for

the 2.5V and 83% for the 1.8V version. The CXE15 series also has a remote on/off

capability with active high or active low logic. Overcurrent and overvoltage protection

features are included as standard. With full international safety approval including

EN60950 and cUL1950, the CXE15 reduces compliance costs and time to market.

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

EMC CHARACTERISTICS

Conducted emissions

EN55022 (See Note 3)

Level A

EN55022 (See Note 3)

Level B

Radiated emissions

EN55022 (See Longform data sheet)

Level B

Immunity:

ESD air EN61000-4-2 8kV, 15kV

ESD contact EN61000-4-2 6kV, 8kV

Radiated field enclosure EN61000-4-3 10V/m

Conducted (DC power) EN61000-4-6 10V

Conducted (signal) EN61000-4-6 10V (See Note 8)

Input transients ETS 300 132-2, ETR 283

GENERAL SPECIFICATIONS

Efficiency See table

Operational insulation Input/output 1500VDC

Switching frequency Fixed 265kHz typ.

Approvals and UL/cUL1950, EN60950

standards TÜV Rheinland

(See Note 5)

Material flammability UL94V-0

Weight 12g (0.42oz)

MTBF MIL-HDBK-217F >600,000 hours

Representative model: 48S05 @ 48Vin, 40°C,

100% load ground benign

BELLCORE 332 >1,500,000 hours

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient -40°C to +65°C

(See Note 9) temp. (3.3V and 5V)

Operating ambient -40°C to +70°C

temp. (1.8V and 2.5V)

Non-operating -40°C to +120°C

(All models)

OUTPUT SPECIFICATIONS

Voltage adjustability 90% to 110%

Total error band (See Note 11) ±3.5% max.

Line regulation 1V8 and 2V5 models 0.5% max.

Low line to high line 3V3 and S05 models 0.1% max.

Load regulation 1V8 model 2.0% max.

Full load to min. load 2V5 model 1.5% max.

3V3 and S05 models 0.5% max.

Minimum load 0%

Overshoot 1V8 and 2V5 models 3.5% max.

3V3 and S05 models None

Undershoot None

Ripple and noise 1V8 and 2V5 models 40mV pk-pk

(See Note 1) 14mV rms

5Hz to 20MHz 3V3 and S05 models 70mV pk-p

20mV rms

Transient response 1V8 and 2V5 models 150mV

(See Note 2) 3V3 and S05 models 100mV

typ. deviation 400µs recovery to

within total error band

INPUT SPECIFICATIONS

Input voltage range 48Vin nominal 33 to 75VDC

Input current No load 35mA max.

Remote OFF 25mA max.

Input current (max.) (See Note 4) 0.55A max. @ Io max.

and Vin = 33 to 75V

Input reflected ripple (See Note 6) 5mA (pk-pk) typ.

Active high remote ON/OFF (See Note 10)

Logic compatibility Open collector ref to -input

ON Open circuit or >2VDC

OFF <1.2VDC

Undervoltage lockout Power up 33V (typ.)

Power down 30V (typ.)

Start-up time Power up 1.5ms (typ.)

(See Note 7) Remote ON/OFF 2.5ms (typ.)

SPECIFICATIONS

File Name: CXE15S.PDF Rev: 01 Oct 2002

TÜV

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

1Measured as per recommended set-up. See Application Note 116 for

details.

2di/dt = 0.1A/µs, Vin = 48VDC, Tc = 25°C, load change = 0.5 lo max. to 0.75

lo max. and 0.75 lo max. to 0.5 lo max.

3The CXE15 meets level A and level B conducted emissions only with

external components connected before the input pins to the converter.

See Application Note 116 for details.

4Recommended input fusing is a 2A HRC 200V rated fuse.

5This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

6Measured with external filter. See Application Note 116 for details.

7Start-up into resistive load.

8Signal line assumed < 3m in length.

9Operating ambient temperatures are specified at natural convection.

Higher operating temperatures are possible with increased airflow. See

Application Note 116 for details.

10 Remote ON/OFF (pin 3) and Trim (pin 5) are currently available individually

or together by special order only. Manufacturing lead times may apply. The

base model includes pins 1, 2, 4, and 6. Use the suffix ‘–R’ for pin 3 with

negative logic, ‘-S’ for pin 3 with positive logic, and ‘-T’ for the Trim pin.

For example, a CXE 5V output with all six pins and positive remote

ON/OFF logic should be ordered as ‘CXE15-48S05-ST’.

11 This parameter is calculated at worst case line, load, temperature and initial

settings.

CAUTION: Hazardous internal voltages and high temperatures.

Ensure that unit is not user accessible.

PROTECTION

Short circuit protection Continuous

Overvoltage protection Non-latching clamp

TELECOM SPECIFICATION

Central office interface A ETS300-132-2, input voltage

and current requirements

PIN CONNECTIONS

PIN NUMBER FEATURE

1 Vin -

2 Vin +

3 On/Off (See Note 10)

4 Vout +

5 Trim (See Note 10)

6 Vout -

CXE15 Series

Single output

DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters 2

Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com

File Name: CXE15S.PDF Rev: 01 Oct 2002

OUTPUT INPUT OVP OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL

POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER (10)

(MAX.) (MIN.) (MAX.)

10.8W 33-75VDC 2.3VDC 1.8V 0A 6A 83% 0.3% 2.0% CXE15-48S1V8

15W 33-75VDC 3.2VDC 2.5V 0A 6A 85% 0.3% 1.5% CXE15-48S2V5

15W 33-75VDC 4.0VDC 3.3V 0A 4.5A 86% 0.1% 0.5% CXE15-48S3V3

15W 33-75VDC 6.0VDC 5.0V 0A 3A 87% 0.1% 0.5% CXE15-48S05

2002

The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

CXE15 Series

Single output

DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters 3

Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com

File Name: CXE15S.PDF Rev: 01 Oct 2002

International Safety Standard Approvals

UL/cUL 1950 3rd edition. File No. E135734

TÜV TÜV Rheinland. Certificate No. R2074133

1.000 (25.40)

TOP VIEW

SIDE VIEW

BOTTOM VIEW

2.000 (50.80)

0.600 (15.24) 0.600 (15.24)

0.800 (20.32)

0.200 (5.08)

0.300 (7.62)

0.10

(2.54)

0.400 (10.16)

0.800 (20.32)

0.120 (3.05)

0.100

(2.54) 0.800 (20.32) Case Outline

0.400 (10.16)

0.040 (1.016)

0.200

(5.08)

0.200 (5.08) .200(5.08) .560 (14.22)

.060 (1.52)

Standoff (4 places) Plated Through Hole

0.052-0.06 (1.321-1.40) typical

Recommended Hole Pattern

0.015 (0.38)

0.350 (8.89)

0.400 (10.16)

0.600 (15.24)

0.040 (1.02)

Dimensions in Inches [mm]